[Help] LabVIEW issues finding paths...

Similar Questions

• Dear Adobe, I've updated my account, my payment charged 2 times 1 EUR and still I can't access the PS and LR! Pls help me to find a contact in the customer service! Much thanks! Rita Frei

  Dear Adobe, I've updated my account, my payment charged 2 times 1 EUR and still I can't access the PS and LR! Pls help me to find a contact in the customer service! Much thanks! Rita Frei

  Go to Adobe Creative Cloud

  
  

  Hi Rita,.

  For 1 EUR costs please see Adobe Store | Order FAQ and your online payment

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Hi I hope someone can help. I find that when I increase the clarity on an image, it becomes very noisy/grainy. I told myself there is a tool to Denoise, but I can't seem to find it on lr5. I watched the tutorials, but they seem to be for lr4

  Hi I hope someone can help. I find that when I increase the clarity on an image, the image becomes very noisy and grainy. I told myself there is a tool to Denoise images but I can't seem to find it on lr5. I saw a couple of tutorials but called lr4 lr5 not. Help!

  Judging by the before and after shots, the original was very underexposed and you he cleared up in LR. Where only a small amount of light enters the camera, these pixels have a weak signal (image) / noise. Subsequent clarification editing software will make the sound a lot more visible, much larger than a dose of clarity. Conversely, lower the tone of an overexposed image will produce an image with less noise because S/N, in camera was higher. For this reason, it is advised to give, if possible, the exposure as much as possible without exceeding the point of clipping to the brightest highlights. In this case, with the sky in the background, you probably might not have increased the exposure of many, but you could bring the sky just before clipping, relying on the capabilities of Lightroom's sophisticated recovery allow to darken the sky during editing, which would have reduced the amount of required clarification for the pilot and the trees.

• Help please - issue of calculation of execution time

  Hello
  
  Version of DB: database Oracle 11 g Enterprise Edition Release 11.2.0.3.0
  Previous thread (RE: help please - issue of calculation of execution time) mode lock, therefore open new thread.
  
  Karthick_Arp thanks for your great help with the merge code.
  
  I modified my code with Merge statement instead of loops and internal loops.
  
  PFB code and output. But still I am negitive values over time of execution because end_time < start_time is coming. Please suggest me how to solve this problem.
  
  1 CREATE OR REPLACE PROCEDURE my_proc
  2 EAST
  3 sql_string VARCHAR2 (4000);
  4 v_start_time TIMESTAMP;
  5 v_end_time TIMESTAMP;
  6 v_rowcnt NUMBER;
  7. START
  8 FOR c1 IN (SELECT ROWNUM tab_no, tablename, TYPE
  9 FROM stored_ddl_policies by tablename) / * mourning tablename order * /.
  10 LOOP
  11 sql_string: = q']
  12 merge into #tablename # b
  13 using (select empkey, id, dt
  14de emp_base) on (a.empkey = b.empkey)
  15when matched then update set b.id = a.id, b.dt = a.dt] ";
  16 sql_string: = REPLACE (sql_string, "#tablename #", c1.tablename);
  17 v_start_time: = SYSTIMESTAMP;
  18
  19 sql_string EXECUTE IMMEDIATE.
  20
  21 v_end_time: = SYSTIMESTAMP;
  22 v_rowcnt: = SQL % ROWCOUNT;
  23 DBMS_OUTPUT.put_line (c1.tablename); / * added for display * /.
  24 DBMS_OUTPUT.put_line (v_start_time);
  25 DBMS_OUTPUT.put_line (v_end_time);
  26 INSERT INTO exec_time (TABLE_NAME, START_TIME, END_TIME, EXCUTION_TIME, NO_OF_RECORDS_PROCESSED)
  27 VALUES (c1.tab_no |) ' ' || C1. TableName, v_start_time, v_end_time, v_end_time - v_start_time, v_rowcnt);
  28 END LOOP;
  29
  30 COMMIT;
  31EXCEPTION
  32 THEN THAN OTHERS
  33 THEN
  34 DBMS_OUTPUT.put_line (SQLERRM);
  35END;
  16 m
  
  OUTPUT:
  

  select * from exec_time by start_time desc

  TABLE_NAME START_TIME, END_TIME EXCUTION_TIME NO_OF_RECORDS_PROCESSED
  
  6 TAB6 31/05/2013 3:07:00.282065 AM 31/05/2013 3:06:47.103731 AM - 00 33 00:00:13.178334
  23 TAB23 31/05/2013 3:06:56.159271 AM 31/05/2013 3:06:56.342313 AM + 00 00:00:00.183042 1013
  20 TAB20 31/05/2013 3:06:47.104115 AM 31/05/2013 AM + 00 00:00:09.054770 158169 3:06:56.158885
  13 TAB13 31/05/2013 3:06:41.668578 AM 31/05/2013 3:06:31.690199 AM - 00 28 00:00:09.978379
  7 TAB7 31/05/2013 3:06:41.624134 AM 31/05/2013 3:06:41.668468 AM + 00 00:00:00.044334 0
  12 TAB12 31/05/2013 3:06:31.690582 AM 31/05/2013 3:07:00.281522 AM + 00 00:00:28.590940 240715
  3 TAB 3 31/05/2013 3:06:24.669461 AM 31/05/2013 3:06:41.623421 AM + 00 00:00:16.953960 47426
  2 TAB2 31/05/2013 3:06:24.182326 AM 31/05/2013 AM + 00 00:00:00.486723 5242 3:06:24.669049
  8 RAB8 31/05/2013 3:06:21.416823 AM 31/05/2013 3:06:24.181956 AM + 00 00:00:02.765133 28636
  1 TAB1 31/05/2013 3:06:16.320679 AM 31/05/2013 AM + 00 00:00:05.095731 132633 3:06:21.416410
  16 TAB16 31/05/2013 3:06:07.446056 AM 31/05/2013 AM + 00 00:00:08.874227 421215 3:06:16.320283
  11 TAB11 31/05/2013 3:06:07.442987 AM 31/05/2013 3:05:55.361263 AM - 00:00:12.081724-00 60273
  19 TAB19 31/05/2013 3:06:03.683463 AM 31/05/2013 3:06:07.445630 AM + 00 00:00:03.762167 77549
  15 TAB15 31/05/2013 3:06:00.291696 AM 31/05/2013 3:06:03.683017 AM + 00 00:00:03.391321 77117
  10 TAB10 31/05/2013 3:05:57.787733 AM 31/05/2013 AM + 00 00:00:09.654601 517960 3:06:07.442334
  18 TAB18 31/05/2013 3:05:56.742873 AM 31/05/2013 3:06:00.291274 AM + 00 00:00:03.548401 105630
  24 TAB24 31/05/2013 3:05:55.361707 AM 31/05/2013 3:05:56.742506 AM + 00 00:00:01.380799 15115
  4 TAB4 31/05/2013 3:05:18.873303 AM 31/05/2013 3:05:06.966972 AM - 00:00:11.906331-00 49078
  21 TAB21 31/05/2013 3:05:13.609759 AM 31/05/2013 3:05:18.872878 AM + 00 00:00:05.263119 56525
  22 TAB22 31/05/2013 3:05:09.070048 AM 31/05/2013 AM + 00 00:00:48.717139 451439 3:05:57.787187
  5 TAB5 31/05/2013 3:05:06.967411 AM 31/05/2013 3:05:09.069642 AM + 00 00:00:02.102231 773
  25 TAB25 31/05/2013 3:05:05.198282 AM 31/05/2013 AM + 00 00:00:08.410911 308670 3:05:13.609193
  14 TAB14 31/05/2013 3:04:59.575951 AM 31/05/2013 3:05:05.197701 AM + 00 00:00:05.621750 12118
  17 TAB17 31/05/2013 3:04:43.740910 AM 31/05/2013 3:04:59.575503 AM + 00 00:00:15.834593 529
  9 TAB9 31/05/2013 3:04:38.286041 AM 31/05/2013 3:04:59.011404 AM + 00 00:00:20.725363 65921
  
  Thanks in advance.
  
  Published by: 1008545 on May 31, 2013 01:40
  

• Please help me to find the link to downlaod oracle BI experience

  Please help me to find the link to downlaod oracle BI experience
  I got experience in obiee, so where can find
  
  Thanks in advance

  Hello

  Discoverer belongs to BI Standard Edition. You can load BI from here. You need the 2 CDs for Discoverer Plus and Viewer and the CD-ROM of the discoverer Admin tools and office.

  You must also apply the patches to go to the latest version. The LearnDiscoverer blog has details of the latest patches.

  Rod West

• Error 0 x 80070003 system cannot find path specified when you try to open the music folder

  Original title: error 0 x 80070003

  Opening of office music folder and clicking new folder, a new folder window appears and indicates "error 0 x 80070003...» the system cannot find the path specified. »

  What should I do to make a new folder?

  Thank you

  Newby0

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers for a better understanding of the issue.

  1. Since when are you facing the issue?

  2 are logged as administrator?

  3. where's the music folder?  Located internal or an external storage device?

  4. do you have an anti-virus installed on the computer program?

  5. are you aware of any recent software or the hardware in the computer changes?

  You try to open the file as administrator. Right-click on the file and select run as administrator.

  You can also try to launch an online scan and check if that helps.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  You can also start the computer in safe mode and check if the problem persists. If the problem persists, you can start the computer in a clean boot state, and check if all third-party software may cause the problem. Clean boot helps eliminate software conflicts.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• Find paths with hidden folders

  I try to get in a folder with templates for word, I find the path in word, but once I try to go in there, I don't see the respective folder.

  Located in El Capitan hidden folders and how can it change the implementation in this way I can see hidden folders?

  Path in Word shown: MacintoshHD/users/username/Library/Application Support/Microsoft/Office/models user.

  I can change the path in Word, but I want to keep and delete only some models.

  Thanks for your help.

  Choose go to folder from the Finder Go menu / Paste ~/Library/Application Support/Microsoft/Office/User Templates in.

  (141655)

• How to change the window font sizes help LabVIEW?

  I read the help documents LabVIEW quite often, and the default fonts are too small, making it very difficult to read for long period of time. I couldn't find anything when I change the font size.

  Please let me know.

  Thank you.

  Help is HTML and at least, in Windows, it seems that IE is used to display. Most web pages have a defined font size to control the appearance of the page, but you can ignore it by going to Internet Options (accessible from both help screen) > accessibility (which is a button hidden in the bottom of the page). I see no using LabVIEW to actually specifying the size, but at least for me it made bigger. Note that this affects any web page that view you in Internet Explorer.

• Cannot find path during extraction from CD to computer

  original title: problems with CD extraction

  I'm trying to rip CDs to my laptop and my laptop hard drive. When I insert the cd and click on copy CDs, he says that he can not find the path. I checked the box options and where it should show the way, it's white and I can't add by clicking on the button Edit. HELP Please

  Laptops get dusty, you could try blasting carefully inside the car with compressed air where the dust is to play with the laser lens or internal to the drive.

  Otherwise the drive can read discs that you insert into it? If not, you can try to visit the support site of the manufacturer of your laptop, enter the model number, then look to see if updated drivers are specific available on the CD drive, USB, chipset, etc. This could be a symptom of a bug that has since been fixed in a newer version of the driver.

• under 3.0.1 problems to install the software. Could not find paths when checking "clutter".

  Added Win7 for my XP Pro under Fusion 3.0.1 installation.  When I try to install the software (more recently Taxcut 09 for Windows) when it is in the part where it checks the space required, the mistakes of software each time trying to find the path to the (shared) network more precisely the error is:

  During the 'calculating size' error is Error 1606 could access the network location
  VMware-host\shared folders\Documents\

  so I do not know how to do: If accessible location or how to change the path where the program checks for space.  Help, please!  (even if I still DO XP Pro installed, it wasn't running; just Win7).

  Jim in Chicago

  Looks like you have activated mirrored folders and if you have you will need to temporarily disable mirrored folders and then install the software and then you can turn on records in the opposite direction.

• Need help, unable to find my serial number

  I recently moved into a new House, with all the fuss that ensued. Shortly after moving, I decided to upgrade my computer to Windows 8. And to try to get rid of some old problems, I only kept private files and did a clean update.

  After (successful) upgrade Windows I had to reinstall my Adobe Photoshop CS6 extended, only to find out that I can't find the box containing the CD. It must have been misplaced during our move. On my Adobe account on adobe.com, I don't find any trace of the order, although I buy through Adobe. All I have is an email from Adobe to thank me for buying the CS6 and encouraging me to register my new product. Which I forgot to do.

  So, here I am, without my serial number and so can't get Photoshop on my computer. It's extremely worrisome, is there something I can do?

  Cordially Rotski

  Serial number or activation issues

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• Unable to find path error

  I try to build my first approx. edition simple everything seems fine until the last screen «create app» When I click I get this error: unable to find the path: / users/work/Library/Preferences/stagemanager station. BD092818F67280F4B42B04877600987F1 11B594.1/shop Local/dmp / (name of publication here) _2012_9_8_11_25_26 /(publication name.) Can anyone help to understand this error? What's in a Local store? I joined Adobe Cloud. Do I still have to get a serial number unique edition?

  Thank you

  Chuck

  I just wanted to post it here in case anyone else has this same problem who rampage #SharedObjets and dmp files in the directory Library Preferences solved this for me.

  Chuck

• I need help using the target path tool

  Hi all

  I realize that I need to keep all my code in the main storyline, so now I need serious help with targeting movieclips and buttons, when I use the target path tool (the viewfinder in the action script Panel) it allows me to navigate to the thing I want, but when I use his suggestion it very often does not work , and I find myself using trial and error to get by.  ICAN get stuff to work, but I really have no idea why or how I do it, sorry to be a N00B, but I really think that if I can work that I get somwhere.

  See you soon

  void

  subtlefly72 wrote:

  Thanks kglad,.

  OK, this is essentially what I did, but its been a bit hit and Miss, but maybe now, I can't see why, your last sentence

  of course, all of these objects have which existed at the time your code runs.

  So if I'm making refers to something within a mc and it does not exist on the first image, there will be an error?

  exactly.

  also, what is this.  Object() and Object (parent)?

  I have to be the use of these?

  not when using the code on the main timeline.  "This" refers to the current scope, which is for the code in the main storyline, the main timeline.  What follows is the same:

  This.MC and mc

  This.var1 and var1
  

  And again, I want to know why the target tool gives me a path that does not work?

  I can't tell you much about the tool to the target.  I never used it.  but I tried to test this afternoon and it seems to work fine to target a nested movieclip.  again, you must ensure that this object exists when your code runs so if you're targeting something on the frame 2 (or more) of a movieclip using the code on frame 1 of the main timeline, the reference may be correct, but the object does not exist when your code runs.  There are a number of ways to handle this, if this is your main problem.

• Find paths between two nodes using SQL sort by cost

  Hi gurus,
  
  I want to find all paths from the source node to the target node that will be sorted by the cost. I don't know if it was possible with the SQL statement. How to start with this query? The script to create the tables and data are given below:
  
  ------------------------------------------------------------------------------------------------------------------
  create table of nodes (nodeId int Primary Key, nodeName varchar (50));
  
  create paths of table (pathId int Primary Key, int fromNodeId, int toNodeId, int cost);
  
  insert into a values (1, 'ISL') nodes;
  insert into a values (2, "LHR") nodes;
  insert into a values (3, 'HYD') nodes;
  insert into a values (4, 'FLS') nodes;
  insert into a values (5, 'MUL') nodes;
  insert into a values (6, "KHI") nodes;
  insert into a values (7, 'QT') nodes;
  
  insert into values of paths (1,1,3,20);
  insert into values of paths (2,1,5,10);
  insert into values of paths (3,1,7,80);
  insert into values of paths (4,2,4,10);
  insert into values of paths (5,3,4,40);
  insert into values of paths (6,3,5,20);
  insert into values of paths (7,3,6,10);
  insert into values of paths (8,6,7,30);
  insert into values of paths (9,6,5,30);
  insert into values of paths (10,6,3,10);
  insert into values of paths (11,7,2,20);
  insert into values of paths (12,5,4,40);
  insert into values of paths (13,5,7,40);
  
  ----------------------------------------------------------------------------------------------------------------------------------
  Assume that the source = ISL and QT= target, there are different paths to QT ISL:
  
  Path relative cost DSB #.
  ==== ================================= =================
  1 ISL-> Multimedia-> QT 50
  2 ISL->->-> QT 60 KHI HYD
  3 ISL-> QT 80
  4 ISL-> HYD-> Multimedia-> QT 80
  5 ISL-> HYD at KHI-> Multimedia-> QT 100
  
  This gives us all possible paths, sorted by price.
  
  No indication or help will be appreciated.
  
  Thanks in advance and best regards
  
  Bilal
  
  Published by: naive2Oracle on February 11, 2011 09:59

  select  ltrim(sys_connect_by_path(nodeName,'->'),'->') path,
          extractvalue(dbms_xmlgen.getXMLtype('select '|| sys_connect_by_path(cost,'+') ||' cost from dual'),'/ROWSET/ROW/COST') - cost cost
    from  paths p,
          nodes n
    where p.fromNodeId = n.nodeId
      and nodeName = 'QT'
    start with nodeName = 'ISL'
    connect by nocycle fromNodeId = prior toNodeId
                   and prior nodeName != 'QT'
      order by cost
  /
  
  PATH                                                              COST
  -------------------------------------------------- -------------------
  ISL->MUL->QT                                                        50
  ISL->HYD->KHI->QT                                                   60
  ISL->HYD->MUL->QT                                                   80
  ISL->QT                                                             80
  ISL->HYD->KHI->HYD->MUL->QT                                        100
  ISL->HYD->KHI->MUL->QT                                             100
  
  6 rows selected.
  
  SQL> 
  

  SY.

• [JS, CS3] Please help - need to find text and then insert to find

  Hi all

  I have a clever script that I use to make fractions by inserting a textframe inline.  It has a dialog box that allows you to enter the numerator and the denominator.

  Now, I would like to change this script to search for fractions in the text (for example, 5/16) and replace this part with my textframe inserted automatically.

  The problem is I can not understand how to find the word containing the character slash and then to get the insertion point, so I can add my textframe as an inline.  Once I found the word with the slash (fraction), I think I can split the fraction in the slash content for the numerator and the denominator.  Just can't pop than textframe there at this time and replace the word.

  Have I made this pretty clear to anyone who might be able to help?

  Kind regards

  Len Swierski

  Hey Len,

  You sent me on a journey into the past. I wrote about this issue very soon after CS hit the street with JavaScript for the first time. On this page:

  http://www.pdsassoc.com/index.php?NAV=javassub&ban=SettingFractions&info=jstutorials/Setti ngFractions/index.html

  you will find that I think it's a relevant discussion. I required the user to select a slash but this is where you will be after your script has found a slash. I hope this helps. I was maybe a little pedantic on this page, but this is all very new at the time.

  Dave