Help, lack of output Buttion

Adobe Bridge came with my computer and I'm doing a Web page gallery, at the sayed tutorial I need to press the exit button, but is not there or in the work area how do I get it again? Help, please

This is a capt screen if it helps

Thank you

cameron6 wrote:

do I HAV to buy it, I just had my friend install photoshop cs3 for me cuz he had

In this case Cameron you use illegally and get some more help here unless you get a legitimate copy of yours!

And perform a correct installation!

Tags: Bridge

Similar Questions

HP 50 g RPL program to list the factors needing help the formatted output; Matrices, vectors, lists, etc.?

Hello

I have not always perfer the output of the DIVIS HP 50 g.

DIVIDED lists all the factors of a number in a way that is ineffiecent and confusing when there are many factors of a given number.

For example, when you run 1000 DIVIS you are treated to a large "block" of numbers organized vertically in such a way that only 4-5 of the 16 factors of 1000 are still visible to you without additional keys.

I'm trying to create a program that simply formats the output of DIVIS differently when there are a lot of factors for a given number. I'm a newbie to the USER RPL. I have the factors that come out a while loop in this format. (100, 10) Unfortunately, my time loop depends on these factors enters NOT the battery until AFTER he calculated all the. I need to find a way to store a set of factors by the execution of the loop in a kind of variable, and then remind each other both on the stack at the end of the program execution. If the code is necessary for you to see, I can post it. The problem is that it is unclear how many factors will be present at this stage. It will be the original number / 2 because I have through each pair of factor in jurisdiction parens with R-> C. In addition, the capture method must be in the loop because that if it is not the loop won't work correctly because the method by which he organized the factors in their concerned couples depends on a process of battery undisturbed during the execution of the loop. Leaving the parens at the bottom of the battery causes there are an odd number of factors in the stack, which invalidates my program for various reasons. In addition, it would be useful to include a function that could test whether or not the number of factors of an odd number, because I will need to include separate code for this. I don't know any such function in USER - RPL, but I am a beginner in this area. Thanks for any help!

Zekelegge

Ranothil wrote:
(...)
For 1000, my dream program would output;

(...)

Try this:
```
' DUP DIVIS SWAP ON / SWAP R-> C EVAL.
```
or:
```
"DIVIS DUP DUP SIZE 2 / 1 SWAP SUB DUP UNROT / R-> REVLIST C EVAL.
```

no help from audio output

Please help someone...

I have hp 2312ax g6

There is no sound in my laptop

I took it to the hp service center and they said that the audio port on the mobo is damaged

motherboard should be replaced.

I have two audio device

1 amd

2 idt

is it possible that I can get audio output

Hi legendary92,

I tried it myself and it happens. Which country are you? There is a country option in the upper right corner, and mine was created in the United States. Also, you might be able to find a replacement using the part number in the goals, there are a number of third party sites that sell HP components. Unfortunately, I can't recommend a particular site.

Thank you

Table of contents, lack of output Responsive HTML5 (Robohelp 2015)

Problem : When I generate Responsive HTML5 output using a conditional compilation expression, there is no TOC in the output.
I know that good content is included in / excluded from the output based on the research I'm doing in the output. The only problems seems to be there is no table of contents.
This could be the cause of this problem?
Thanks in advance for any help you can offer!
Dawn

I will check later but it seems that you are missing a key point that I made in my previous answer (16 in the thread).

You said that you have removed all the tags with the exception of a few topics. I said to apply a different tag to subjects you don't want not included but you don't have that, you have applied just 911 that you want and the TOC then included everything. It's normal and covered in the page on my site, I have spoken to you. http://www.Grainge.org/pages/authoring/build_expressions/expressions.htm

Build Expressions

The last point he subjects unmarked reads:

Note that any topic that has NO tag should be included in the output.

So what you declare in your previous post. I am sure that all unwanted subjects with any other tag marking will fix things.

See www.grainge.org for RoboHelp and Authoring information

@petergrainge

Helps the extractor output Essbase outline
Hello gurus

I use Essbase outline 9.3.1 Extractor to extract of Essbase 9.3.1 and I need a little bit of a hand in the interpretation of the results\Output. I'm after properties but dynamic Calc, shared, never share Member and aggregation. Can anyone help me please with the definitions for the column Property0.

I also want to use the output to load via the contour load utility, it will be able to read all the columns that are exported by the extractor Outlinr?

Help, please
In the eyes of SER60 in the section "creating rules files. It lists the codes member than the outputs for example outline Extractor X property - dynamic Calc etc.

You can also search the "member property codes" (exact phrase) in the SER60 and it will take you just here... Sorry I'm not good at the display of links to things SER60 online...:)

Help with the output
I have the following XML:

<? XML version = "1.0" encoding = "UTF-8"? >
< REPORT >
< P_REQUEST_ID > 5953004 < / P_REQUEST_ID >
< LIST_Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
Forms of < FILE_TYPE > < / Type_de_fichier >
SIMPLE < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 30 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
Forms of < FILE_TYPE > < / Type_de_fichier >
WAY to < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 6 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
Forms of < FILE_TYPE > < / Type_de_fichier >
COMPLEX < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 9 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > function < / Type_de_fichier >
SIMPLE < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 11 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > function < / Type_de_fichier >
COMPLEX < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 2 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > PackageBody < / Type_de_fichier >
SIMPLE < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 49 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > PackageBody < / Type_de_fichier >
WAY to < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 19 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > PackageBody < / Type_de_fichier >
COMPLEX < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 53 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
Procedure < FILE_TYPE > < / Type_de_fichier >
SIMPLE < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 67 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
Procedure < FILE_TYPE > < / Type_de_fichier >
WAY to < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 39 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
Procedure < FILE_TYPE > < / Type_de_fichier >
COMPLEX < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 64 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > reports < / Type_de_fichier >
SIMPLE < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 209 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > reports < / Type_de_fichier >
WAY to < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 71 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > reports < / Type_de_fichier >
COMPLEX < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 107 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
SQLScript < FILE_TYPE > < / Type_de_fichier >
SIMPLE < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 267 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
SQLScript < FILE_TYPE > < / Type_de_fichier >
WAY to < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 36 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
SQLScript < FILE_TYPE > < / Type_de_fichier >
COMPLEX < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 76 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
shellscript < FILE_TYPE > < / Type_de_fichier >
SIMPLE < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 3 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
shellscript < FILE_TYPE > < / Type_de_fichier >
WAY to < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 1 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > trigger < / Type_de_fichier >
SIMPLE < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 6 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > trigger < / Type_de_fichier >
COMPLEX < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 1 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > view < / Type_de_fichier >
SIMPLE < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 32 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > view < / Type_de_fichier >
WAY to < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 8 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< Q_SUMMARY_REPORT >
< FILE_TYPE > view < / Type_de_fichier >
COMPLEX < COMPLEXITY > < / COMPLEXITY >
< numero_fichier > 5 < / numero_fichier >
< / Q_SUMMARY_REPORT >
< / LIST_Q_SUMMARY_REPORT >
< / REPORT >

and I need the output in the following format

Simple means complex
--------------------------------------------------------------------
30 6 9 forms
Function 2 of 11
PackageBody 49 19 53
Procedure 67 39 64
209-71-107 reports
SQLScript 267 36 76
3 1 shell script
6 1 trigger
View 32 8 5
------------------------------------------------------------------------
Total 641 180 319
------------------------------------------------------------------------

Please help me with the possibility of this type of output, thanks in advance.

Kind regards
Mahi
The problem is solved by developing the model using the desktop version downloaded from patch 12395372

Microsoft HTML Help - lack expand icon in the table of contents

Hello
The development (+) icon suddenly is no longer in the table of contents, when I generate a Microsoft HTML Help output. I can always double click books to develop them and see the underlying topics... but no + icon.
I have attached a few screenshots of what is happening and what needs to happen.

Can someone help me recover this icon?
Thank you!

Hello

Examine your SSL properties, and then click Change next to advanced settings. Then tab table of contents lines allow root and you can then activate the signs Plus/minus.

See you soon... Rick

Useful and practical links

Wish to RoboHelp form/Bug report form

Begin to learn RoboHelp HTML 7, 8 or 9 in the day!

Adobe Certified RoboHelp HTML Training

SorcerStone blog

RoboHelp EBooks

Several uses for the final product, need help with Render & output parameters

Aloha, this is my 1st time in this forum... posted this question in Premier Pro and has been mentioned here.
I created an effect straight project. I want to make four 4 very specific uses. Unfortunately, I don't know anything about these formats to be given options in AE - CS4. One of the many 'rendering settings' and 'output module' settings 'make model '. This seems the best option for me given my future use: 1) for the DVD; (2) for electronic mail; (3) for YouTube. (4) my web site. I read and reread the rendering and export options in the manual of use-AE CS4 without success in understanding what each option should be used for. I need help in the translation of pixelpicker-talk.
Can someone help me about these accurate "rendering settings" and "output module" parameters listed in AE in the option "make and model"?
Thanks a lot... come visit the watrer is warm and clear as always.
KonaDon

I understand - I think the article using After Effects is a very complete resource, explaining the various features and their purposes. But the real world is full of special cases that are very difficult to address in a manual. In addition, it is a moving target. Different best options today probably the best choice, next year.

Let's see if we can help here:

1-. DVD: on the technical side, it is always MPEG-2. A very specific taste of MPEG-2. But while After Effects will let you export a file of this type (choosing the MPEG - 2 DVD is predefined in the output Module), it is also true that most of the applications (such as Adobe Encore DVD) DVD authoring are very friendly in terms of letting you wear one (ideally, uncompressed) Quicktime or AVI (which in no way is compatible DVD) and do the encoding in MPEG-2 for you. So it is up to you: you can encode EI using the preset DVD MPEG-2, or you can use an application of coding specialized (such as Adobe Media Encoder in stand-alone mode) or simply let the DVD authoring application do the encoding for you. This should be very simple and in this case, you can simply render a Quicktime or AVI file without loss (there is a model of output Module called "Lossless" who will take care of everything. You can use the default value, the 'best' model to make settings in most cases).

2-. E-mail: on the one hand, you need something that is really light and as good quality as possible. In the other, you want something universal compatibility, which can be read in all or almost all computers. H264 (advanced version of MPEG-4) format is really good in terms of efficiency, but its ' adoption is perhaps not as widespread yet. Flash Video (FLV) is really good in this regard. In this case, you could choose Adobe Flash Video (FLV) as the format in the output Module and then choose preset FLV 'Flash 8 web small' for this purpose.

3 YouTube: it's not that simple. The ideal format for YouTube is not quite exist, they insist on the re-encoding each file that you download, even if your file is technically identical in every way to their versions. So what you want here is something that looks good and it isn't huge to download. This all spells 'H264', in my opinion. The details depend on the question of if your Composition is HD or SD, 4:3 or 16:9, etc. Strange as it may seem, the big "iPod" preset for the format H264 is a good starting point. You can customize it to increase the speed of transmission a little (maybe 2 or 2.5 Mbps, against 1.5 Mbps).

4 website: even once, you need something that most people already have in their computers. Flash Video is an excellent choice, since about 98 percent of users have the Flash plugin. But in this case, you can have more great heights and flow rates, so you can use the "Flash 8 big' defined by default as a starting point. Once the Flash 10 plugin (which now supports the H264 in addition FLV) spreads in the future, you could standardize on H264 in a delivery format, with different settings for each type of destination.

I hope this helps.

With the help of an output to trigger a task WITHOUT additional cables?

Hello

I have a PXI-6229 (Multifunction DAQ) and a PXI-6723 (AO, with a few lines of DIO). My channel mappings are not set in stone yet, so I can use either module.

For a test system, I use producing 2 continuous and periodicals of digital signals in the background (via 2 channels). The 2 waveforms have different profiles, but they are synchronized by being linked to the same task (Digital 1 Wfm d NChan NSamp).

Model has: 0 0 1 0 1 0 1 0

Model b: 1 0 0 0 0 0 0 0

On the one hand the test steps, I need to read a waveform of voltage over (via a channel of AI). When I get to this step, I want to start reading at one of the rising edges of the B model. How can I accomplish this?

A method I can think of is:
- Duplicate the model B on another channel
- Connect to a PFI line on my controller
- Use the PFI input to trigger the task to HAVE it.
Is it possible to do without an extra cable? Thanks in advance!

Hi JKSH,

First of all, I want to say that your proposed method is a completely logical and it will work. However, this method includes a more physical routing so the trigger can be delayed.

You can use the export DAQmx (VI) Signal to route your DIO (with pattern B) line to another exit of Terminal such as a trigger. You can then use this signal newly routed to trigger your channel HERE. Here is the documentation for this specific VI:

http://zone.NI.com/reference/en-XX/help/370469AA-01/lvdaqmx/mxexportsignal/

HELP/lack of Corrupt field...

Hi all.

Using Vista 32 bit. Week last someone dropped my laptop and now it does not start correctly.

Returns with...

File: CLFS. SYS

Status: 0xc00000e9

Required field is missing or damaged.

Have tried to get into the bios etc and fix but laptop says no, laptop repair keeps saying load disc that windows cannot load normally... did not have my installation disc, but contact the manifac today. In the meantime if anyone can help then please do!

Thnks a lot, a lot.

It is probably a hardware problem. Contact technical support of computer laptop mftr. for the repair. If it is under warranty, test the hard drive and if any of the tests fail, replace it. Hope that the motherboard is not too damaged.

http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

MS - MVP - Elephant Boy computers - don't panic!

Camera problem-> please very urgent help hit with output

Hello

I use default camera in my application once I have capture any image, it is to be saved in the section Gallery consumes memory. Please help how to solve this problem is possible to register in any other directory too, I checked using camera roll path but his does not work... Please help I need to release tomorrow

import bb.cascades 1.0
import bb.system 1.0
import bb.multimedia 1.0
import my.library 1.0
import bb.cascades.multimedia 1.0

{Page}

ID: cameraScreen
string property using:
Boolean photoBeingTaken property

actions:]
{ActionItem}
Title: "capture."
imageSource: "asset:///images/items/camera-icon.png."

ActionBar.placement: ActionBarPlacement.OnBar
onTriggered: {}
_APP.setBHResult (false);
photoBeingTaken = _app.getCaptured ();
If (photoBeingTaken == false) {}
Camera1.capturePhoto ();
_APP.setCaptured (true);

}
}

},

{ActionItem}
Title: "bookmarks".
imageSource: "asset:///images/items/bookmark.png."
ActionBar.placement: ActionBarPlacement.InOverflow

onTriggered: {}
_APP.setBHString ("Bookmarks");
_APP. CallBookmarkScreen (7, 0);
_APP.setBHResult (false);
Bookmark var = _bookmarks.createObject ();
NAV.push (Bookmark)
}
attachedObjects:]
{ComponentDefinition}
ID: _bookmarks
Source: "Loading.qml".
}
]
},
{ActionItem}
Title: 'history '.

imageSource: "asset:///images/items/history.png."
ActionBar.placement: ActionBarPlacement.InOverflow
onTriggered: {}
_APP.setBHString ("History");
_APP. CallBookmarkScreen (8, 0);
_APP.setBHResult (false);
Bookmark var = _history.createObject ();
NAV.push (Bookmark)
}
attachedObjects:]
{ComponentDefinition}
ID: _history
Source: "Loading.qml".
}
]
},
{ActionItem}
Title: "settings".
imageSource: "asset:///images/items/settings.png."
ActionBar.placement: ActionBarPlacement.InOverflow
onTriggered: {}

var setingscr = _settings.createObject ();
NAV.push (setingscr)

}

attachedObjects:]
{ComponentDefinition}
ID: _settings
Source: "Settings.qml".
}
]
},
{ActionItem}
Title: "Exit".
imageSource: "asset:///images/items/Exit-button.png."
ActionBar.placement: ActionBarPlacement.InOverflow
onTriggered: {}
_APP.exitpopUP ("\t\tAre are you sure you want to exit?");
}
}

]

{Of container
ID: camerascreen

layout: {DockLayout}

}
{Of container
ID: camerascreen1
visible: true

Camera {}
ID: camera1
visible: true;
supCameras variant of property
attachedObjects:]
SystemSound {}
ID: shutterSound
sound: SystemSound.CameraShutterEvent
},
{CameraSettings}
ID: settings
}
]
onCreationCompleted: {}
supCameras = camera1.supportedCameras;
CameraFocusMode = 1;
Console.log ("aftercomeback1");
_APP.setCaptured (false);
If (supCameras.length == 0 | supCameras [0] == CameraUnit.None) {}
Console.log ("no unit of the camera is accessible");
} ElseIf (supCameras [0] == CameraUnit.Rear: supCameras [1] == CameraUnit.Rear) {}
Console.log ("the rear camera is available.");
Camera1.open (CameraUnit.Rear);
} ElseIf (supCameras [0] == CameraUnit.Front: supCameras [1] == CameraUnit.Front) {}
Console.log ("unity front camera is available.");
Camera1.open (CameraUnit.front);
} else {}

}
}

Notecard: {}
Camera1.getSettings (Settings);
settings.focusMode = CameraFocusMode.Auto;
settings.shootingMode = CameraShootingMode.Stabilization
Camera1.applySettings (Settings);
}

onCameraOpened: {}
Console.log ("aftercomeback1 in oncameraopned");
Camera1.getSettings (Settings);
settings.focusMode = CameraFocusMode.Auto;
settings.shootingMode = CameraShootingMode.Stabilization
Camera1.applySettings (Settings);
Camera1.startViewfinder ();
}
onCameraClosed: {}
Console.log ("viewfinder has stopped");
Camera1.stopViewfinder ();
}

onCameraResourceReleased: {}
Console.log ("viewfinder stopped onCameraResourceReleased");
Camera1.stopViewfinder ();
Camera1.close)
Console.log ("reduce to the minimum is" + Application.minimize ());
Application.autoExit)
Camera1.stopViewfinder ();
Camera1.close)
}
/ * onCameraResourceAvailable: {}
Console.log ("viewfinder stopped onCameraResourceAvailable");
Camera1.open)
Camera1.startViewfinder ();
}*/
onViewfinderStarted: {}
Console.log ("aftercomeback1 in oncameraopnedonViewfinderStarted");
Console.log ("oncamera openedd onViewfinderStarted >");
myIndicator.stop)
photoBeingTaken = false;
}

/ * onCameraResourceAvailable: {}
Camera1.startViewfinder)
}*/
onShutterFired: {}
shutterSound.play ();
If {(photoBeingTaken)
Processing.Visible = true;
}

}
/ * keyListeners:]
KeyListener {}
onKeyEvent: {}
Perform an action when the signal is emitted
Camera1.startViewfinder)
}

onKeyPressed: {}
Perform an action when the signal is emitted
Camera1.startViewfinder)
}

onKeyReleased: {}
Perform an action when the signal is emitted
Camera1.startViewfinder)
}
}
]*/
onViewfinderStartFailed: {}
Console.log ("oncamera openedd onViewfinderStartFailed >");
}
onPhotoSaved: {}
_APP.setImgFileName (fileName);
var process = marks.createObject ();
NAV.push (Processing);

}

}
}
{Of container
layout: {DockLayout}

}
horizontalAlignment: P
verticalAlignment: VerticalAlignment.Center
{ActivityIndicator}
ID: myIndicator
visible: false
preferredWidth: 500
preferredHeight: 500
}
}
{Of container

ID: treatment
verticalAlignment: VerticalAlignment.Center
horizontalAlignment: P
visible: false
preferredHeight: 30
preferredWidth: 500

background: Color.create ("#000000")
TextArea {}
leftPadding: 170
verticalAlignment: VerticalAlignment.Center
horizontalAlignment: HorizontalAlignment.Fill
editable: false
text: qsTr ("Loading...")
textStyle {}
fontWeight: FontWeight.Bold
fontStyle: FontStyle.Normal
color: Color.create ("#ffffff")
}

}

}
}

attachedObjects:]
{ComponentDefinition}
ID: brands
Source: "Processing.qml".
}
]


onCreationCompleted: {}
Console.log ("onCreationCompleted is called")
Application.Asleep.Connect (onAsleep);
Application.Awake.Connect (onAwake);
Console.log ("onCreationCompleted's over")
}
function onAsleep() {}
Console.log ("onAsleep is called in the function")
If (camera1.open () == true) {}
Console.log ("open camera true onAsleep is called in function")
Camera1.close ();
Console.log ("closed camera onAsleep is called in function")
} else {}
Console.log ("open camera fake onAsleep is called in function")
Camera1.stopViewfinder ();
Camera1.close ();
applicationAsleep();
}
}
function onAwake() {}
Console.log ("onAwake is called in the function")
myIndicator.start)
If (camera1.close () == false) {}
Console.log ("closed camera fake onAwake is called in function")
Camera1.open ();
Console.log ("open camera onAwake is called in function")
} else {}
Console.log ("closed camera true onAwake is called in function")
applicationAwake();

Console.log ("open camera is called in the function")
Camera1.open ();
Console.log ("after open camera is called in the function")
}
}}

So, thank you it is is stored in the SD card now... Thanks a lot bb10 community

is it possible that I can remove the image released from the sd card before you capture another image... access to remove.

Concerning

Rashmi

Need help with the output of the query formatting

Hello

Here are the scripts to create the table and create test data:

create table result (acct number(10), acct_nm varchar2(100), stage varchar2(10), target_pc number(10,2), long_target_pc number(10,2))
/
Insert into RESULT
   (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
Values
   (47042, 'Dora the explorer', 'AFTER', 33.6, 48)
/  
Insert into RESULT
   (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
Values
   (47042, 'Dora the explorer', 'BEFORE', 33.6, 48)
/  
Insert into RESULT
   (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
Values
   (41142, 'Bob the Builder', 'AFTER', 9.18, 20.4)
/  
Insert into RESULT
   (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
Values
   (41142, 'Bob the Builder', 'BEFORE', 9.18, 20.4)
/  
Insert into RESULT
   (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
Values
   (41086, 'Sofia the first', 'AFTER', 17.96, 51.3)
/  
Insert into RESULT
   (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
Values
   (41086, 'Sofia the first', 'BEFORE', 2.98, 8.5)
/  
Insert into RESULT
   (ACCT, ACCT_NM, STAGE, TARGET_PC, LONG_TARGET_PC)
Values
   (41086, 'Sofia the first', 'BEFORE', 14.98, 42.8)
/  
COMMIT
/

I need output in the following format when I query this table:

Account         Account Name        Stage       Target PC       Long Target PC
41086           Sofia the first   
                                   BEFORE            2.98                  8.5
                                                    14.98                 42.8
                                   AFTER            17.96                 51.3
41142           Bob the Builder                                                     
                                   BEFORE            9.18                 20.4
                                   AFTER             9.18                 20.4
47042           Dora the explorer                                                     
                                   BEFORE           33.6                  48.0
                                   AFTER            33.6                  48.0
   
Total Accounts = 3

Here is what I tried but it does not gives me out I want (below referred to as the code):

spool c:\break_test.txt
column acct format 9999999999
column acct_nm format a50
column stage format a15
column target_pc format 999.99
column long_target_pc format 999.99
break on acct, acct_nm, stage
select * from result order by acct, stage desc

      41086 Sofia the first                                    BEFORE              2.98           8.50
      41086 Sofia the first                                    BEFORE             14.98          42.80
      41086 Sofia the first                                    AFTER              17.96          51.30
      41142 Bob the Builder                                    BEFORE              9.18          20.40
      41142 Bob the Builder                                    AFTER               9.18          20.40
      47042 Dora the explorer                                  BEFORE             33.60          48.00
      47042 Dora the explorer                                  AFTER              33.60          48.00

Please tell us how to get there.

Thanks in advance!

Go back and check the syntax of the PAUSE command.

SQL> column long_target_pc format 999.99
SQL> break on acct, acct_nm, stage
SP2-0158: unknown BREAK option "acct_nm,"

The syntax must be

sql> break on acct on acct_nm on stage

SQL formatting * more reports

CSS help lack display button I can change to block

Hiya
I'll just follow the tutorial on how to make a website and got to the bit where it says scroll up the screen (which should be between visibility and overflow-y) so I can change to block, so that my link can be clicked in any block not only writing... Please help
Claire x

St Clair Web Design says:

I know how to add manually with something, but don't know what it is I have add?

You add the following line to your css stylesheet link. That will make the link display also wider than its parent container:

display: block;

Request for help with the output of a script

Hello

I need assistance with the output of a script. I have a script that retrieves advanced config of the esx hosts in a cluster and exports to a txt file. Here is the script I use:

$Decimals = 1

$VCServers = @)

$VMSummaries = @)

$InputFile = "VCs.txt".

Read the input file, loop of VCs

Foreach ($VCname in Get-Content $InputFile) {$VCServers += $VCName}

Foreach ($VCServer to $VCServers)

{

$VC = to connect-VIServer $VCServer

$VMhosts = get-VMHost

Foreach ($VMHost to $VMhosts)

{

Write-Progress "Collecting information in $VCServer" 'connecting to host $VMHost' - Id 0

$VMSummary = "" | Select the host name, TCPIPHeapMax, TCPIPHeapSize, HeartbeatTimeout, HeartbeatFrequency, HeartbeatMaxFailures, MaxVolumes

$VMSummary.HostName = $VMHost.Name

$VMSummary.TCPIPHeapMax = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name Net.TcpipHeapMax). Values

$VMSummary.TCPIPHeapSize = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name Net.TcpipHeapSize). Values

$VMSummary.HeartbeatTimeout = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatTimeout). Values

$VMSummary.HeartbeatFrequency = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatFrequency). Values

$VMSummary.HeartbeatMaxFailures = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. HeartbeatMaxFailures). Values

$VMSummary.MaxVolumes = (get-VMHostAdvancedConfiguration - VMHost ($VMhost) - name of NFS. MaxVolumes). Values

$VMSummaries += $VMSummary

}

$OutputFile = "AdvancedNFS.txt".

$VMSummaries | Format-Table | Out-file $OutputFile

This script runs without any problem and generates a text file that looks like this:

TCPIPHeapMax TCPIPHeapSize HeartbeatTimeout HeartbeatFrequency HeartbeatMaxFailures MaxVolumes hostname

abcd1 abcd2 abcd3

I am trying to output a csv file and run into a problem where each host values are not displayed correctly. I replaced the last 2 lines in the script as follows:

$OutputFile = "AdvancedNFS.csv".

$VMSummaries | Export-CSV $OutputFile

My output looks like this:

Host name	TCPIPHeapMax	TCPIPHeapSize	HeartbeatTimeout	HeartbeatFrequency	HeartbeatMaxFailures	MaxVolumes
ABCD1	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection	System.Collections.Hashtable + ValueCollection

What I am doing wrong?

Thank you

Alex

Hello

You can try changing your script like this:

-Replace "." "With values '-["'-']. "
-Optimize calls to Get-VMHostAdvancedConfiguration

Your code will look like this:

...

Write-Progress "Collecting information in $VCServer" 'connecting to host $VMHost' - Id 0

$VMSummary = "" | Select the host name, TCPIPHeapMax, TCPIPHeapSize, HeartbeatTimeout, HeartbeatFrequency, HeartbeatMaxFailures, MaxVolumes

$VMSummary.HostName = $VMHost.Name

$VMHostAdvancedConfig = get-VMHostAdvancedConfiguration - VMHost $VMHost - name Net.TcpipHeapMax, Net.TcpipHeapSize, NFS. HeartbeatTimeout, NFS. HeartbeatFrequency, NFS. HeartbeatMaxFailures, NFS. MaxVolumes

[$VMSummary.TCPIPHeapMax = $VMHostAdvancedConfig\["Net.TcpipHeapMax"\]

[$VMSummary.TCPIPHeapSize = $VMHostAdvancedConfig\["Net.TcpipHeapSize"\]

$VMSummary.HeartbeatTimeout = $VMHostAdvancedConfig\ ['NFS. HeartbeatTimeout '\] '.

$VMSummary.HeartbeatFrequency = $VMHostAdvancedConfig\ ['NFS. HeartbeatFrequency '\] '.

$VMSummary.HeartbeatMaxFailures = $VMHostAdvancedConfig\ ['NFS. HeartbeatMaxFailures '\] '.

$VMSummary.MaxVolumes = $VMHostAdvancedConfig\ ['NFS. MaxVolumes '\] '.

$VMSummaries += $VMSummary

...

Kind regards

Dimitar

Export the file to help... output size seems to be too much

I have a movie of 12 minutes with audio, video and still images in it.
Currently when I export the file is 865 MB... I need whether less than 100 with a decent quality. This is a video tutorial that will be downloaded from the web.
Can you please give me advice on how to do this? On which variables to change etc. I don't know if I have it exported out of Camtasia Studio, it is around this benchmark 100 or less... the problem is I don't know what are the settings for the presetting of Camtasia.
I use the following configuration:
QuickTime format
Summary:
Output:
1400 x 790, 15 (fps), high quality 100
48000 Hz, stereo, 16-bit
H.264
Source:
Encode, 01-OverviewSWKit
1920 x 1080 (1.0), 24 fps, progressive, 00:12:03:12
48000 Hz, stereo
Parameters:
Video codec: H264
Basic Settings:
Quality 100
Width/height (1400 x 790
Appearance: Square Pixels (1.0)
Go to maximum depth - "United Nations"-checked ".
Depth: 24 bit
Advanced settings
Key Frame, each 1 frame - 'A' checked
Optimize stills - "ONE" checked
"UN" reorganization framework checked
The flow setting:
Restrict flow to xxxx 'UN' checked
Use the highest quality Render - "ONE" checked
Use previews 'UN' checked
Use of interpolation "VERIFIED."
------------------------------

The flow setting:

Restrict flow to xxxx 'UN' checked

Check this box and set a value. Bitrate is the main single determinant of output file size. If you reduce the bitrate, you decrease the size of the file, of course, when you lower the transmission speed, you decrease the potential quality of output. Welcome to the balance that is a video encoding...

Help, lack of output Buttion

Similar Questions

Maybe you are looking for