HP Photosmart 3210: Printerhead not aligned

Similar Questions

• HP Photosmart 3210 will not install on Windows 7 Pro 64 bit.

  HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit.  I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts.  No error message.  I ran into several related issues lately.  I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit.  Said it ends, but nothing is installed.   Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems?  I spent hours trying to solve these.

  OK, much better progress!

  If the software is always installed, tell him you'll connect later.

  Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.

  Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.

  Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."

  Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.

  One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.

  Good impression!

• Photosmart 3210 will not use Photo tray

  I had a problem recently with the loss of my networking capability, but solved this by returning to USB connection and sharing on my network. After several weeks of operation acceptable I find now that I can print is no longer the Photo using the Photo tray. If I check the properties of the printer it lists only the main tray. It also showed the paper options different occasions.  Sometimes it shows the complete list of sizes of avilable but at other times, that this list is very short.  Is this a software / hardware or driver problem?  I removed the led sector and left the printer not fed during the night but no change. I also re-installed the driver on one of my computers, but it made no difference. It affects all computers in my network...

  Any thoughts greatly appreicated.

  Mike

  Hello

  Please enter the Control Panel, then printers.

  Locate the icon for your printer and right click, choose Properties (if it is Windows7, select printer properties)

  Enter the device settings tab, then make sure that the Photo Tray is set as installed or activated.

• to install hp photosmart 3210 on laptop with vista

  I have a HP Photosmart 3210 printer installed on my home network.  He was running from my old PC.  Now want to link my laptop that runs Vista and can not install the printer.  Any ideas how I can get around this?

  Thanks in advance.

  Hi nickynoos175,

  Follow the steps outlined in the document below.

  Install the software of the product in Windows Vista for a wired network connection (Ethernet)

• . HP Smart printing fails to include images - all-in-one printer, HP Photosmart 3210

  With the help of HP Smart printing on all-in-one printer, HP Photosmart 3210. Smart photo has disappeared from my computer and now reappeared. Now the images are not yet an option to include on the printed page. They do not appear.  Has anyone else had a problem with Photo Smart?

  What operating system do you use?

  What did you do to make them reappear, or just is it?

  Have you noticed updates to HP or Windows until the printer is missing? What happened before he reappeared?

• Photosmart 3210: BLUETOOTH ADAPTER for PHOTOSMART 3210

  I have an old Photosmart 3210 all-in-one printer still works fine.  I want to make it wireless using a bluetooth adapter.  The recommended is bt300.  Y at - it a newer version that would work? I don't think it sells more.

  Hi @SW-NewtownPA,.

  Welcome to the Forums of HP Support!

  I see that you are wondering if you can use a bluetooth adapter that is different than that of your printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I don't know if you can use another bluetooth adapter, but the manual indicates that the HP bt300 and HP bt400 work.

  Manual

  Login your HP all-in-one are equipped with a USB port you can connect directly to a computer via a USB cable. You can also connect your HP all-in-one to a wired network. If you insert a bt300 HP or HP bt400 series adapter printer wireless Bluetooth® in the front USB port, Bluetooth® devices such as PDAS and camera phones can print to your HP all-in-one. Note in the rest of this chapter, the bt300 HP or HP bt400 series Bluetooth® wireless printer adapter is simply referred to as an HP Bluetooth® adapter.

  To see if these adapters are still available, or if you can use other adapters, I would call the HP parts store.

  To order HP computer and components of the printer parts by phone please call 1-800-227-8164 Monday-Friday 07:00 - 7:00 pm CST

  Hope that answers your question. Thank you for posting!

• Photosmart 3210 print extra page after the installation of the Mavericks.

  HP Photosmart 3210 - old but already reliable.  Mavericks installed within the last few days.

  An additional page is printed after or before each document.  Page is strange for example 2345 X numbers.  or 2.

  Window printers and scanners (Options and supplies) says he uses pilot 4.0.4

  The line with 2345 X seems to be typed after the correct draw is complete, but page is not pushed to the next printed document is initiated. Line 2 is printed our apparently at random, when printer is idle.  Twice while I typed this

  I tried to delete the printer and reinstall after verifying the software update.  He has not fixed the problem.

  Hi wbt1,

  The patch is compatible with Snow Leopard 10.6, and I am confident that he will solve the problem. This HP Print Driver Update solves the problem with HP inkjet products that causes an extra page to print once planned.

  Communicate details

  Exit the: 03-12-2013

• Poor print quality Photosmart 3210 with OK with XP Windows 8.1

  The downloaded programs and drivers for the "HP Photosmart 3210' using Windows 8.1 do not provide quality sectionals, resolution, paper size, etc., which was available on Windows XT.

  Hello!  Sorry above my pay grade.  Make a new post and ask your question on to the bottom of ranking to W7?

  Not many people like W8. When you all get out all the bugs in a few years, I'll think to the top of standings. Until then, I'll stay with my W7

• I have a photosmart 3210 that repeated blue ink is empty, but it is news. What's wrong?

  HP Photosmart 3210

  driver is installed on Windows XP

  error message: "replace the following empty ink cartridge to continue printing" on a brand new Blue cartridge.

  I do not often use the printer. Last summer, he started asking me to replace some empty cartridges. So far, I have fill all of them. All the other cartridges are fine when they are rfilled and replace except blue. So, I bought a brand new blue ink cartridge. But the printer keeps giving the same error message.

  How can I solve this? Any other issue could cause this error message? Is that my printer is totally out? so disappointed...

  Thank you!

  HI -.

  Unfortunately, the only other thing I can think is to try a reset of the printer.  With the printer on, remove the power cord 2 to the back of the printer, and then from the socket.  Wait 60 seconds and reconnect the power cord the printer and the power outlet.  If that does not take care of him, the printer will probably need service, though it may be more cost effective to get a new printer.  You can find options to contact the HP Support here.

  Sorry we were not able to solve.

• Cannot install HP PhotoSmart 3210 on 8.1, 64-bit Windows. You want to start.

  Goal: Printer install HP Photosmart 3210, FUll CV utility (Solution Center, Photo Creations, etc.) on a new DELL system running Windows 8.1, 64-bit.

  Hardware configuration: The HP 3210 is connected by Ethernet to Western Digital My Net N750 router.  Two computers are connected to the same router: a race of all-in-one DELL 8.1 of Windows with all updates installed (this is the system I am trying to install the HP software on) and an Apple iMac, I need only basic printing capability.  Both computers are temporarily connected via WiFi; This will be changed to Ethernet at a later date.  The router using DHCP to assign IP addresses to devices, including printer.  I can ping the printer from two computers.  I can set up the HP embedded web server on both computers.  The iMac can print and scan from the printer.

  Short story: I tried several times to install the printer drivers and the HP utility software on Windows 8.1 System.  At one point, I installed the drivers, but not able to install the utilities.  When I finally got the utilities installed, they did not see the printer.  At the present time, even the notebook can not see the printer.  The mistakes that I've seen are:
  -"The system cannot find the file specified."  (the name of the file contained the string ice_suffix.  "I believe that this failure was due to the presence of McAfee Security software, using msconfig more later disabled.)
  -BSOD BAD_POOL_ERROR
  -No network detected (from HP Install Wizard) device
  "This app prevents you to restart" (the title of the app was "HP all-in-one series")
  I tried the wizard install the HP add a tool of the device, the print and Scan doctor and several other things.  I did a level 4 uninstall as described below, which has encountered an error in an early phase, but continued after I clicked "OK".  I installed the latest version of Flash.  The System File Checker has been run when the system was first installed on May 29 and found no problem.  I temporarily wired the printer directly on the Windows system via USB (and then put it back on the router).  I have reset the printer by removing the power for a minute, etc, etc.

  At this point, I would like to clean the system as much as possible and try again from scratch, using the installation wizard.  Based on my experience so far and a careful reading of the many positions installation - problems on this forum, I created a checklist of proposed to achieve this.

  My request on the forum: Please see the checklist.  I won't go forward until it has been approved as being complete and accurate.  Missing something?  Nothing is unnecessary?  The order should be changed?

  NOTE: Step 6 assume that you have already tried to install the software and therefore to have a copy of the uninstaller on the system utilities.  In my case it is true.

  1 connect the printer to the router via Ethernet.  (This is my current setup).
  2 turn on the printer.  Unplug the power cable from the back of the printer.  Wait at least one minute.  Reconnect the power cable.  Wait for the printer to initialize.
  3. do a "clean boot": (now RMB) do a right-click on the icon of window in the lower left of the screen.  Select 'run '.  Enter "msconfig".  Click on 'OK '.  In the Services tab, check "hide all Microsoft Services".  Click on "disable all".  In the Startup tab, click on "Open Task Manager".  On the start of the Task Manager tab, click the top entry and then click "disable".  Repeat for each entry in the list.  Verify that the status column now contains "Disabled" for each entry.  Click on the 'X' at the top right of the window to close the Task Manager.  In the System Configuration window, click 'OK '.
  4. RESTART the system to perform a start without the Services and start disabled.
  5. connect to an administrator ID.  This must be the ID used previously to try to install the software.
  6 do an uninstall of level 4: RMB on the icon of the window in the lower left corner of the screen.  Select 'run '.  Enter '%Temp% '.  Click on 'OK '.  In the resulting display folder (supposed to be in C:/Users / 'ID' / AppData/Local/Temp, where 'ID' is your user ID) enter "Uninstall_L4" in the search box at top right of the screen.  This should find 'Uninstall_L4.bat' (supposed to be in C:/Users / 'ID' / AppData/Local/Temp/7zS0 * / util/ccc).  Click (or double-click if your system is configured to require that).  [NOTE: several forum posts say to use L4uninstall.exe, but this file is not anywhere in the Temp folder on my system.]
  7 meet the need of all the prompts that appear.  A final prompt will tell you that a restart is required.  If two windows appear at the same time, both with "Restart" buttons on them, click the button in the larger window.  [Note from experience: when I click on restart in the small window, WIndows complained that he could not start because the larger window was always active.]
  8. once the system restarted, RMB-the icon of the window > run--> msiexec /unreg-> OK, then run RMB window icon->-> msiexec/regserver-> OK.
  9. check that the uninstall and complete if necessary:
  Look in C:/Program Files (x 86) for HP records; If found, delete them.
  Look in C:/Program Data HP records; If found, delete them.
  RMB-> the icon of the window run-> % Temp %-> OK.  Delete all files in the folder that results.  [NOTE that it prevents to run uninstall again until installation has been completed, since it is where are the uninstall files.]
  RMB-> Panel window icon-> devices and printers.  If the HP 3200 Series is broadcast, RMB-> remove the instrument.
  RMB icon window-> Control Panel-> system-> device-> tab Manager display-> show hidden devices.  Expand "Printing queues" (click the triangle).  When a HP 3200 queue exists, RMB on it and click on uninstall.  Expand "Printers" and do the same thing.
  RMB-> run-> regedit window icon-> OK. Scroll to the top of the list.  Click on 'Computer' to establish a starting point.  Edit-> Find... check the box "Keys", uncheck the 'Values', 'Data' and "Match whole string only" boxes.  In the "Search" box enter "HP." (including interval)-> then find.  [NOPE, that is not all HP keys and found a few that seem not to be HP (for example SOAHP. (DLL). a search for "HP" finds lots of unrelated keys.  Is a good way to clean the registry if level 4 uninstall it did not?]  Use F3 to search for subsequent entries.  For those who are clearly HP related [How can I be sure?], RMB on the key, and select 'delete '.  [Yes, it's dangerous and without greater clarity I won't actually, but I don't like leaving orphans key autour.]
  10. run Disk Cleanup.  Click the window to access a screen start or Apps.  Type "Disk Cleanup".  Click on "free disk space by deleting unnecessary files.  Check the desired boxes.  Click OK.  Wait for the course to complete.
  11 RESTART the system.
  12 install the HP software.  Pointing a browser on http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe to download the wizard, then run the downloaded file.  On the first prompt screen, click "install".  When you are prompted, select custom installation.  "Uncheck the box 'Unique consumables HP', 'scheme Customer Participation', and ' bing for HP bar '.  When you are prompted for the update preference, select "Ask before updating" [my wife, nonnegotiable preference] remove useful tips and suggestions.  Click on 'Next' as required.  When you are prompted, select the Ethernet connection.  The printer must be discovered.  [On one attempt, at this point, that I received the message "the requested service is not found".  Of course, there is that HP Services listed in msconfig, but in order to get that much, I had turned off them ("clean boot").  This seems to be a catch-22 situation, unless these services should have automatically started earlier in the installation process.]
  13 RESTART.  This is necessary at the end of the installation process.  ["Clean boot" conditions hold back at this point?  If so, I'll have to restore the Services and Startup items later and antother restart.  [When is is safe to do so, that is how do you know that the installation of HP is really over?]

  Again, the purpose of this post is to validate the above list.  Your informed comments will be appreciated.

  Hello

  Please try to uninstall the software by following the Uninstall_L4 utility (as stated in your previous post)

  Then, follow the steps below and reinstall the HP software again:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Photosmart 3210 print on transparent surfaces

  Two questions. The Photosmart 3210 can effectively print on transparent media for inkjet printers? If yes the 3210 requires media with a sensor strip or not?

  Thank you

  Photosmart 3210 print on coated ink-jet transparency materials.  You will need media with the strip of paper for the printer to correctly recognize the media as it is introduced into the printer.  I suggest that you select the type of real media in the paper/quality tab rather than leave it in automatic mode.

• Photosmart 3210 moved to Windows 7 Home Premium (64-bit)

  I got a new Acer laptop with windows 7 and can not install the driver for the photosmart 3210 has even thought that there is a driver for windows 7. I even tried with xp and vista and as pilots to expect that they did not work.

  Wow, nice of you guys for we inform Wizard installation for users of windows 7. thought of you guys have worked for hp?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-90246-5&CC=us&DLC=en&LC=en&OS=4063&product=439488&sw_lang=

• PhotoSmart 3210 - unhandled exception NET, library, etc.

  I managed to install the Photosmart 3210 while a full software functionality on several of my laptops HP XP SP3.

  Drunk after that I have install on the current, one when I try to start the Solution Center to perform a scan or PhotoSmart first, so-called PhotoGallery trying to start or to settle and gets finally in a loop with an exception unhandled in the Net Framework.  I found many reports of the present on the web, but no solution that seems to work.  Sometimes, it isn't PhotoGallery but Document Viewer who tries to start.

  No idea how to solve this problem?  Thank you.

  It is possible that the window XP SP3 is the problem.  I bought a used laptop to SP2 on ebay and have now installed the Photosmart 3210 software with only a few minor problems.

  Maybe I was wrong about my previous systems as SP3, maybe they were SP2.

  Installtion on SP2 has not been without hassles.  The system froze or some of its parts hung a couple of times I got a message saying that 'data execution prevention' had extinguished a few module.  Which seems to fix things was going into Control Panel, system, advanced, settings of performance and say things to turn on dep except fo RL module there demolish.  A lot of tension and backup then during all this.  I don't have this problem when the old facilities which worked, in fact, I had never heard of before data execution prevention.

  I noticed before starting the 3210 software install NET framework 1.1 was already on the system.

• HP Photosmart 3210 all-in-One of network error printing from Windows 7

  Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down

  -message is "error printing".  Printing to the same printer via USB connection is successful.

  Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.

  Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility

  to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.

  Hello

  Thanks for posting,

  This may be a problem with ports,

  Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.

  If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.

• PROBLEM WITH PRINTING 4 X 6 ON PHOTOSMART 3210

  I have downloaded a driver on my toshiba

  lx830 - 11(d) but 3210 photosmart printer do not print

  my photo tray, keeps the impression in the main tray

  help please

  Hello toolmaker14.

  I understand that you can not print 4 x 6 photos using your Photosmart 3210. You want to make sure that you change the print settings, within the program you are printing from.

  Please follow this HP document pictures 4 x 6 from a computer printing.

  If this printer is still printing of the 'Hand' plateau, then follow this HP document on when the printer is not Pick Up paper from the Photo Tray.

  Check that paper photo 4 x 6 is placed face down. Also ensured it is pushed as far as the paper can go. He must be touching your rolls of paper.

  Please send me your troubleshooting steps.