help me create a column with the time format

Similar Questions

• column with the only format of loading time

  My DB, 11 2 on OEL 5.5 GR
  Hi all
  I have a problem with the loading of the external table. I have a txt file with a format of columns HH24:MI:SS

  START_TIME
  00:10:20
  01:15:11
  02:11:10

  And I don't know which data type use in external table because in the future, I'll have to do some calculations on this column, so I should load as a DATE, but miss me "mm/dd/yy" to the front. Any suggestion how to do properly?

  You could use a data type CHAR or date for the outer table and do your math with this column correctly.

  The key is that convert a time string to a date data type will add the current date to it. For example:

  SQL> alter session set nls_date_format='dd/mm/yyyy hh24:mi:ss';
  
  Session altered.
  
  SQL> select to_date('00:10:20', 'hh24:mi:ss') from dual;
  
  TO_DATE('00:10:20',
  -------------------
  01/02/2011 00:10:20
  

  Some examples of code for both cases, by using the DATE and CHAR data type. I tested it on 11.2.0.1:

  CREATE OR REPLACE DIRECTORY ext_tab_dir AS '/tmp';
  
  -- /tmp/info.txt
  1,00:10:20
  2,01:15:11
  3,02:11:10
  
  alter session set nls_date_format='dd/mm/yyyy hh24:mi:ss';
  

  (1) using the DATE data type

  drop table tab_time_date;
  
  CREATE TABLE tab_time_date (
    key VARCHAR2(5),
    start_time date)
    ORGANIZATION EXTERNAL (
       TYPE ORACLE_LOADER
       DEFAULT DIRECTORY ext_tab_dir
       ACCESS PARAMETERS
        (FIELDS TERMINATED BY ','
         (key char(5),
          start_time CHAR(8) DATE_FORMAT DATE MASK "HH24:MI:SS"
         )
        )
        LOCATION ('info.txt'));
  
  select * from tab_time_date;
  
  KEY   START_TIME
  ----- -------------------
  1     01/02/2011 00:10:20
  2     01/02/2011 01:15:11
  3     01/02/2011 02:11:10
  

  (2) using the CHAR data type

  CREATE TABLE tab_time_char (
    key VARCHAR2(5),
    start_time char(8))
    ORGANIZATION EXTERNAL (
       TYPE ORACLE_LOADER
       DEFAULT DIRECTORY ext_tab_dir
       ACCESS PARAMETERS
        (FIELDS TERMINATED BY ','
        )
        LOCATION ('info.txt'));
  
  select key, to_date(start_time, 'hh24:mi:ss') from tab_time_char;
  
  KEY   TO_DATE(START_TIME,
  ----- -------------------
  1     01/02/2011 00:10:20
  2     01/02/2011 01:15:11
  3     01/02/2011 02:11:10
  

  Kind regards.

• Create table QA with invalid time zone

  Hello experts,
  
  I have a problem:
  When I create a new table of advanced queue that is the time zone standard + 00:00 in the SYSTEM. AQ$ _QUEUE_TABLES.
  When I queue a message to the QA enq_time differences of two hours with the sysdate. This is because we have a zone schedule + 02:00.
  
  I have a few questions related to the issues:
  
  1. is there a setting to create a QA with the time zone correct offset(+02:00)?
  2. when I update the QA system. AQ$ _QUEUE_TABLES with the time zone correct offset(+02:00) to restart database, nothing happens. The zone is still + 00:00.
  
  I read metalink (bug 5711286) and the forum and all that I can find is dat above issue is fixed in version 11.2.0.1 DB and above.
  
  Below the features of database:
  
  Database 11g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  
  Thanks in advance,
  
  Ronald

  Hello

  Yes, it's the bug that is supposed to be fixed in 11.2.0.1, if people are still problems in this area to this version or later then this should be raised with Support from Oracle.

  Thank you
  Paul

  Published by: pdtill2508 on Sep 14, 2011 09:45

• How can I set the time format 24 hours instead of AM/PM lightning/en? Thank you very much!

  I want to configure lightning with the time format 24 hours rather than the AM/PM format, but cannot find it in the options. Thanks for the help!

  You will need to set it for your operating system. Lightning uses the format of the OS.

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• I bought as a 5.5 download with Lightroom, my pc has a virus. I saved Lightroom ext disk. I am trying to reload on pc BUT it asks for a serial number... I find no reception. Help, please. I registered at the time of purchase, I downloaded.

  I bought as a 5.5 download with Lightroom, my pc has a virus. I saved Lightroom ext disk. I am trying to reload on pc BUT it asks for a serial number... I find no reception. Help, please. I registered at the time of purchase, I downloaded.

  Hi Bronxrick,

  I have sent you your serial number on a private message.

  Thank you

• Hour/Min column in the Time Dimension

  Please can someone help me with the script to fill in the time Dimension Table that contains a column of hours/min. Here's my Time_D structure:
  
  Year
  Quarter
  Month
  Name of the month
  Week
  Day
  Hour
  Min
  
  Also is it a good practice to have the hour/Min column in the time Dimension?
  
  
  Thanks in advance.
  Concerning
  B

  B,
  Sorry if I confused things a bit...
  I wanted to say in the MDB layer, you can model a dimension table (time) with the path complete drill (year-> quarter-> month-> day-> hour-> Min)
  This a logical table would have two sources of logical table to map required fields of your two tables of phyiscal (Date_Dim and Time_Dim)
  You must define the levels of content accordingly for each logical table source, so the user in responses can perfectly break of the year all the way up to Min, their sound a single dimension, actually its two tables and the BI server switches according to the levels of content in the LTS.

  Sorted?
  Let us know if you get the probs.
  Alastair

• Documentation about adding column with the DEFAULT value.

  Hello
  
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_3001.htm#i2198241
  
  < quote >
  If you add a column, then the initial value of each row in the new column is NULL unless you specify the DEFAULT clause. In this case, Oracle database updates each row in the new column with the value specified for the DEFAULT value. This update operation, in turn, triggers AFTER UPDATE triggers defined on the table.
  < quote >
  
  I am not able to understand the emphasis on the part AFTER UPDATE while the column with DEFAULT values addition triggers both BEFORE and AFTER triggers defined on UPDATE.
  
  According to the documents of 11 g
  
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/statements_3001.htm#i2133105
  
  n.m. (u) r only changes with the NON NULL columns, but focus on AFTER UPDATE is still there. No trigger defined on the fire of the update in this case.
  
  This insistence is intended? If not, IMO, it should be changed.
  
  Kind regards

  Hi Sissi. After further discussion, we have added some information about a change in behavior. Here is what says the next version of the doc:

  When you add a column, the initial value of each row in the new column is null.

  * If you specify the DEFAULT clause for a column NOT NULL, then the default value is stored as metadata, but the column itself is not populated with data. However, the following queries that specify the new column are rewritten so that the default value is returned in the result set.

  This optimized behavior differs from earlier versions, when as part of operation ALTER TABLE Oracle database updated every line in the newly created with the default column and then fired defined update triggers on the table. In this release, no trigger is triggered because the default value is stored only in the form of metadata.

  * If you specify the DEFAULT for a nullable column clause, then the default value is added to existing lines under this ALTER TABLE statement, and any update triggers defined on the table are activated. This behavior also means if you change a NOT NULL column with a default value to be nullable.

  Hope that helps to clarify the matter further.

  Kind regards
  Diana

• I have problems with my computer with the time remaining after I reset the clock and made sure it was on the correct time zone and summer time has been check the battery has also been replaced

  and it will not keep the exact time it will keep accelerate at least 5 minutes or more.

  I don't know what else to do about it. You can someone help me?

  I still find myself make too many assumptions.
  First of all, I guess your derivative of clock occurs during the time when the computer is running and not during the period where it is off (or immediately early)?
  Second, I'm assuming that when you run the command "w32tm/Resync" above, the clock made it back to the correct time and no errors were reported?
  Third, you say that your clock drift 5 minutes or more, but you do not tell us how long this gain occurs.  It is two times more win if you wait twice as long to check?  Is the gain gradual or sudden?  Keep he wins or if he stops wins once it arrives before?

  Conditions of default for a computer connected non-member of the field, the time will be updated network-time only at the start and then once a week.  If you are winning too much too quickly, you can adjust how many times your computer asks for time.  Computers in the domain must be more precise and one every hour for a default time synchronization.  You can set your W32tm to that of a computer in the domain to resynchronize your computer more often (SpecialPollInterval).  Here are two articles that describe the clock settings:

  "How to synchronize the time with the time service Windows in Windows XP"
    <>http://support.Microsoft.com/kb/307897 >
  "Time Windows Services tools and settings.
    <>http://TechNet.Microsoft.com/en-us/library/cc773263%28V=WS.10%29.aspx >

  HTH,
  JW

• Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

  Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

  Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

• [8i &amp; 10g XE] How to compare a column with the text of a column with numbers

  This is probably a simple question, but I can't seem to find the answer. I tried variations on use to_number to_char and interpreters, all nothing will do.
  
  The real problem is that I have a table with a column of numbers in a database 8i (datatype = NUMBER (3)) and a column with the text (datatype = CHAR (3)), and I need to compare two values.
  
  This table has thousands of lines, but here's an example of the data in these two columns:

  TXT     CHR
  -----------
  001     1
  001     2
  002     2
  XXX     1
  003     3

  What I want to do is select the lines where the TXT and CHR VALUES do not match, then it would be (given my example):

  TXT     CHR
  -----------
  001     2
  XXX     1

  But, I'm having difficulties in comparing two columns, because they are not the same type of data.
  
  I tried to work on a simplified version of the problem in the 8i database both my 10g XE database:

  SELECT     *
  FROM     (
       SELECT     1.000               AS nbr
       ,     TO_CHAR(1.000,'000')     AS txt
       ,     CAST('001' AS CHAR(3))     AS chr
       FROM     dual
       )
  WHERE     txt = chr
  ;

  But this also returns any line, and it isn't even the "XXX" in the text column to treat in this example.
  
  Can someone help me understand what it is that I'm missing?
  
  Thank you!

  Hello

  user11033437 wrote:
  This is probably a simple question...

  Simple if you know the secret; maddening if you do not have.

  ... I tried to work on a simplified version of the problem in the 8i database both my 10g XE database:

  SELECT     *
  FROM     (
       SELECT     1.000               AS nbr
       ,     TO_CHAR(1.000,'000')     AS txt
       ,     CAST('001' AS CHAR(3))     AS chr
       FROM     dual
       )
  WHERE     txt = chr
  ;
  

  Try:

  TO_CHAR (1.000, 'FM000')
  

  By default, TO_CHAR leaves place the beginning of the string to a sign less, in which case he should ever one, TO_CHAR (1,000, '000') returns makes 4 characters, not 3. "FM" in the format said TO_CHAR do not add a space.

  If it does not, after the release of DUMP (txt) for the few lines that you can't match, so that we can see exactly what is in them.

• How can I create a query with the data control to the web service?

  I need to create a query with the order of web service data, WSDL, it is query operation, there is a message of parameter with possible query criteria and a return message contains the results. I googled but can't find anything on the query with the web service. I can't find a criterion "named" to the data control of web service as normal data control. Blog of Shay, I saw the topics on the update with the data of web service command. How can I create a query with the data control to the web service? Thank you.

  Hello

  This might help

  * 054.     Search form using control data WS ADF and complex of entry types *.

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

• DatePicker with the time in the report of the collection

  Hello
  
  I've created a report through collection. Now, I want an APEX_ITEM. DATE_POPUP with the time in the report.
  To do this, I made some changes in my report, when I change APEX_ITEM. TEXT in APEX_ITEM. DATE_POPUP, then there is an error a occure and when I the lance.
  
  Error: - ORA - 01858: a non-digit character was found here where was waiting for a digital.
  
  
  my code is
  
  Select HTMLDB_ITEM. HIDDEN(1,SEQ_ID),
  APEX_ITEM. C001 Text(2,a.C001).
  APEX_ITEM. DATE_POPUP (3,a.c002,'DD/MM/YYYY HH24 ') c002.
  APEX_ITEM. Text(4,a.C003) c003
  OF APEX_COLLECTIONS one
  where a.collection_name = 'REC_ITEM. '
  
  
  I change here too.
  
  Start
  
  because me in 1... HTMLDB_APPLICATION. Loop G_F01. Count
  htmldb_collection. () UPDATE_MEMBER
  p_collection_name = > 'REC_ITEM ',.
  p_seq = > HTMLDB_APPLICATION. G_F01 (i),
  p_c001 = > HTMLDB_APPLICATION. G_F02 (i),
  p_c002 = > to_date (HTMLDB_APPLICATION. G_F03 (i), ' DD/MM/YYYY HH24'),
  p_c003 = > HTMLDB_APPLICATION. G_F04 (i)
  
  end loop;
  
  htmldb_collection.add_member
  (p_collection_name = > 'REC_ITEM',)
  p_c001 = > NULL,
  p_c002 = > NULL,
  p_c003 = > NULL,
  );
  end;
  
  
  In the datepicker report has created, it is not a datepicker with the time, see the only date, not a date with time.
  
  
  
  Thank you
  Maury

  Maury, I've done a workaround, you can read here: error in date picker in relation to collection

  Edited by: AndyPol 2009-09-11 16:24

• How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  I find easier to use this copy separate Automator Service (download Dropbox).

  To install in your numbers > Services, double-click menu just the package downloaded .workflow and if necessary give permissions in system preferences > security & privacy.

  To use, just:

  1. Select the cells in the column with duplicate names.
  2. Choose separate copy in numbers > Services menu.
  3. Click once in the upper cell where you want the deduplicated values appear.
  4. Command-v to paste.

  SG