Create table QA with invalid time zone

Similar Questions

• timestamp with local time zone

  Hello
  I created a table as follows:
  
  create table timetest
  (date of col1,
  timestamp col2,
  COL3 timestamp with time zone,
  COL4 timestamp with local time zone.
  year apart col5 in the month,
  day apart col6 in the second
  )
  
  inserted a line like:
  insert into timetest values (sysdate, sysdate, sysdate, sysdate, 13-11' year to month INTERVAL,
  ('13 2:59:59.111233' INTERVAL DAY (2) second (6))
  
  When I select * from timetest
  I have found no difference between col2 and col4, I mean timestamp and timestamp with local time zone.
  Please tell me the difference between these two.
  
  thnx in advance

  TIMESTAMP WITH LOCAL TIME ZONE:-always displays the date stored in the local time zone setting i.e. According to the session's time zone setting.
  TIMESTAMP WITH time ZONE:-it will always displays the values stored regardless of the settings of the session.

  Instead of insert sysdate insert localtimestamp and systimestamp into your table.
  insert into values tab (SYSTIMESTAMP, SYSTIMESTAMP);

  insert into tab (LOCALTIMESTAMP, LOCALTIMESTAMP) values;

  Then you must define the different session time zone as the time zone database. I have change the zone session affecting different database.

  SQL > alter session set time_zone = "-03: 00 ';"
  Modified session.

  SQL > select dbtimezone, sessiontimezone double;
  DBTIMEZONE SESSIONTIMEZONE
  ---------- ----------------
  -07:00 - 03:00

  To select it and see the difference.

• Date picker with errors of time with timestamp with local time zone (Apex 5.0)

  Have a problem for the datePicker (with time) to work on a timestamp with local time zone database column.

  It works very well with the time steps, but when I add a mask to format with the time it fails with an error like: -.

  «Date entered stressed attribute value sysdate to element P111000_TARGET_DATE does not YYYYMMDDHH24MI, format DD-MON-YYYY HH24 TZR.»

  I have tried many masks of different formats including: -.

  
  

  • DD-MON-YYYY HH24 TZR
  • DD-MON-YYYY HH24
  • HH:MIPM-MON-DD-YYYY
  • YYYYMMDDHH24MI

  
  

  but still get the same error...

  
  

  No matter who got the job or have a tip? Really want to use the timestamp with local time zone datatype as facilitates a lot of things.

  
  

  Thank you

  
  

  Phil.
  

  
  

  
  

  Pls ignore, do not read the error message... The problem was my default highlighted value in the wrong format.

• How to create Table View with even a column name but another Table?

  Hi all
  
  I have the problem to create a tableview with the same column name, but in the other table.
  
  Table I: -.
  
  Table - PAC051MPROFORMA
  
  Column - MNR, visitid
  
  Table - PAC051TPROFORMA
  Column - MNR, visitid
  
  Table - PAC052MTRANSBILL
  Column - MNR, visitid
  
  Then, I want to create a table for this table. It comes to my SQL
  
  Pacviewproforma CREATE VIEW (MNR, visitid, MNR, visitid, MNR, visitid)
  
  Like some PAC051MPROFORMA.mrn, PAC051MPROFORMA.visitid, PAC051TPROFORMA.mrn, PAC051TPROFORMA.visitid, PAC052MTRANSBILL.mrn, PAC052MTRANSBILL.visitid
  
  where
  
  * (a.PAC051MPROFORMA.mrn = PAC051TPROFORMA.mrn) *.
  and
  * (a.PAC051TPROFORMA.mrn = PAC052TRANSBILL.mrn) *.
  
  SQL return this error ORA-00957 =: duplicate column name
  
  Can I change this SQL for
  
  Pacviewproforma CREATE VIEW (MNR, visitid)
  
  Like some PAC051MPROFORMA.mrn, PAC051MPROFORMA.visitid, PAC051TPROFORMA.mrn, PAC051TPROFORMA.visitid, PAC052MTRANSBILL.mrn, PAC052MTRANSBILL.visitid
  
  where
  
  * (a.PAC051MPROFORMA.mrn = PAC051TPROFORMA.mrn) *.
  and
  * (a.PAC051TPROFORMA.mrn = PAC052TRANSBILL.mrn) *.
  This time this error return = ORA-01730: number of column names specified invalid
  
  What should I do?
  
  Thank you...

  Hello

  SQL> CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
    2  As Select
    3  PAC051MPROFORMA.mrn,
    4  PAC051MPROFORMA.visitid,
    5  PAC051TPROFORMA.mrn,
    6  PAC051TPROFORMA.visitid,
    7  PAC052MTRANSBILL.mrn,
    8  PAC052MTRANSBILL.visitid
    9  from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
   10  where
   11  (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
   12  and
   13  (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
  CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
                                           *
  ERROR at line 1:
  ORA-00957: duplicate column name
  

  Please give different names to each column.

  Something like that...

  SQL> CREATE OR REPLACE VIEW pacviewproforma (MPROFORMA_mrn,MPROFORMA_visitid,TPROFORMA_mrn,TPROFORMA
  _visitid,MTRANSBILL_mrn,MTRANSBILL_visitid)
    2  As Select
    3  PAC051MPROFORMA.mrn,
    4  PAC051MPROFORMA.visitid,
    5  PAC051TPROFORMA.mrn,
    6  PAC051TPROFORMA.visitid,
    7  PAC052MTRANSBILL.mrn,
    8  PAC052MTRANSBILL.visitid
    9  from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
   10  where
   11  (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
   12  and
   13  (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
  
  View created.
  
  SQL> DESC  pacviewproforma;
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   MPROFORMA_MRN                                      NUMBER
   MPROFORMA_VISITID                                  NUMBER
   TPROFORMA_MRN                                      NUMBER
   TPROFORMA_VISITID                                  NUMBER
   MTRANSBILL_MRN                                     NUMBER
   MTRANSBILL_VISITID                                 NUMBER
  

  ORA-01730: number of column names specified invalid

  The list of the nmae column you specified for the CREATE VIEW must correspond with the list of SELECTION in the view.

  Twinkle

• DataPump with different time zone files

  Hello

  I'm trying to import a schema with datapump to a 12 c in oracle 11.2 instance oracle instance. I got an error cause different time zone files. 11.2 is on version 14 and 12 c is on version 18. So I tried to import a single table, make a new export with that one table (table got no timestamp with time zone column data type) and exported. That has worked well. So I modified my schema export to exclude these tables with columns with data type timestatmp with time zone. When you try to import this new dump, it still does not for the same reason.

  So, to import a table worked, but import a schema failed. Does anyone have a suggestion for me, how can I import this discharge? And no, I can't install a patch with the new zone files.

  sql_coder

  I could solve it myself, had to exclude more tables, not only those with timestamp with time zone, but also excluded arrays with data like AQ types $ _ %.

  sql_coder

• time zone - with unknown time zone

  I am able to run it:
  
  
  Select current_timestamp to the time zone "America/Los Angeles.
  of the double
  
  
  My problem is that the zone, which in this case is ' American/of Los Angeles', does not know until the moment of execution. So I want to replace it with a bind variable or pl/sql. When I do this:
  
  Select current_timestamp to the zone: tz
  of the double
  
  
  I get "Keyword not found". Any ideas?
  
  Thank you.
  
  Published by: usmanwvu on August 2, 2012 13:52
  
  Published by: usmanwvu on August 2, 2012 13:53

  If you do this in PL/SQL, you don't have to select the double at all - you could do something like

  declare
    v_ts   TIMESTAMP WITH TIME ZONE;
    v_tz   VARCHAR2(30);
  begin
    v_tz := 'American/Los_Angeles';
    v_ts := CURRENT_TIMESTAMP AT TIME ZONE v_tz;
  end;
  /
  

  Alternatively, in SQL, if you si vous Enroulez wrap the bind variable in an NVL function you can either give a default zone valid or invalid according to how you want it behaves on no entry:

  select current_timestamp at time zone NVL(:TZ,'American/Los_Angeles') from dual;
  

  Kind regards
  Bob

• help me create a column with the time format

  Hi all
  
  Please help me find the query to create a table with 3 columns and insert the following data
  
  ENTITYID | CHGDATE | CHGTIME
  
  ======= ==================== ========
  
  4214984 | 2 OCTOBER 06 12.00.00.000000 AM | 07:23:57
  
  4214985 | 12.00.00.000000 11-SEP-08 AM | 10:52:19
  
  and update of the first line of the above table as follows
  ---------------------
  4214984 | 2 OCTOBER 06 07.23.57.000000 AM | 07:23:57
  ------------------------
  you will need to update the CHGDATE column with the time of the CHGTIME column.

  Sorry, we need a new format around the to_date

  select to_date(to_char(chgdate, 'mm/dd/yyyy') || ' ' || to_char(chgtime, 'hh24:mi:ss'), 'mm/dd/yyyy hh24:mi:ss') from etime3;
  

  This should telll Oracle to the format of the generated string. If this isn't the case, run select with the to_char two as separate columns to see that get us the data that we expect.

• First sends EDL with 'invalid time code format string.

  Follow the suggestions in this thread, I try to send a PCA of a first sequence to Speedgrade.

  When I try to import the Speedgrade JEL, I get this error message:

  

  ERROR

  At the time point is not valid. String (hours) invalid timecode format: '23813 + 20'

  in edition 1

  File: LR001 V 001C 2813 + 20 17 23815 + 0:00 1 + 37

  Line: 2

  I have rarely worked with EDL, but have read the guides Speedgrade and first. I must be missing something but can't tell what.  Here are the details of my project:

  I'm editing in 24 fps. Video files are generated in After Effects of DPX files. The time code is based on the DPX filenames, with the time corresponding to the number of laboratory Roll (so 11:00 11 Roll)

  I export an EDL in the CMX3600 format. I tried two settings by default and without audio. Same results. I even get the same result if I do a sequence of a single clip and try to export this EDL.

  I don't think it's a matter of Speedgrade, because that if I try to re - import EDL in first, it seems that all clips are a single long chassis.

  Any suggestions on what I might hurt would be greatly appreciated.

  Thank you

  Lev

  Figured it out. Creation of project settings must be defined on the display Format: timecode

  Lev

• Create wireless network with airport Time Capsule

  I replace my ISP provider rented the modem / router with a modem, I bought and I would use my gen current airport Time Capsule to set up the wifi network. I can't find the instructions on how to proceed and AirPort Extreme do not seem to apply.

  I am running OS X Capitan 10.11.3 on an early 2015 MacBook Pro.

  Thank you!

  Dale

  I can't find the instructions on how to proceed and AirPort Extreme do not seem to apply.

  Hmm.  A time Capsule is an AirPort Extreme with a built-in hard drive, so what works for one should work for the other and vice versa. You might be looking at old operating instructions?

  Since you've decided to add a new modem, Time Capsule will be reset back to the default settings and then set it up again to work with the new modem.  Apple installation "wizard" will guide you in installing the time Capsule, by appointing a wireless network, set up a password, etc, so the process is very easy to name.

  The installation provided with your Time Capsule Guide goes on how to set up the time Capsule.

  After resetting the time Capsule to factory default settings, you would connect an Ethernet cable from the modem into the "O" on the Time Capsule WAN port.

  To get the "Assistant" Setup running, just click the WiFi icon at the top of the screen of the Mac and are looking for the new AirPort base station. Just below that, click directly on the Time Capsule.  The example below shows an AirPort Extreme, but you would see on your screen time Capsule.

  

  When you click on the Time Capsule, the next screen that is displayed looks like this, except that you will see a picture of a Capsule of time on your screen.

  

  Simply click next to get the process going and follow the instructions.

• Is it possible to install two schemas with different time zones?

  Hello
  Is it possible to configure a schema with a different zone in the same instance of oracle?
  Thanks in advance for your answers.
  
  -Best regards,.
  ENR

  Depend on more or less, now, you want to do.

  ALTER session set time_zone = work my_time_zone but you need to configure for all sessions that affect patterns

  HTH
  Antonio NAVARRO

• How to create an application to display the 3 windows of each with different time zones as the window?

  Hi, I need to create a windows application using c# that will create three windows that display areas and the current time, the title of the window?

  PS: I use an event handler to update the current time.

  Hello

  To improve assistance to this subject, you can ask your question in the MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en/category/visualcsharp

• Convert to shape with LUN-JJ-AA, HH, time zone (GMT or PST)

  Hello
  
  I use the query to get time with the time zone information schedule format below.
  
  > > FROM DUAL SELECT CURRENT_TIMESTAMP
  
  Now the requirement that I got is that I need to convert the format to LUN-JJ-AA, HH, time zone (GMT or PST)
  
  Please suggest me how to convert this format. Or is there any alternative option to time stamp to do the conversion.
  
  Thank you
  Sudhir

  Sudhir_Meru wrote:
  Thanks for answer you, can get this ' MoN-DD-YYYY, HH24 format?

  Why not?

  select to_char(
                 current_timestamp at time zone 'GMT',
                 'DD-MoN-YYYY, HH24:MI'
                ) gmt,
         current_timestamp tm
  from dual;
  
  GMT                TM
  ------------------ --------------------------------------
  07-Jan-2013, 10:59 07-JAN-13 04.29.11.730000000 PM ASIA/C
                     ALCUTTA  
  

• Setting of time zones for those imported for integration AD

  We are setting up integration of ads for VSM9 to import customers and agents.  We hit a roadblock with the time zones.  People are imported based on their membership in a group AD.  Members within each group can be of several regions with different time zones.  Therefore, it is not practical set the timezone in the model of the person.  Within resource maps, there is a timezone field, but I don't see any reference to the time zone in the AD resource that could be associated with the time zone field.  He also doesn't seem to be an option to create a resolution rule as you would for an organization or a location.  We have rules of resolution in place for the Organization and the location, the time zone which is getting applied to the person is not based on the Organization, but instead, it is to be set to 'undefined', which is the option selected in the model of the person.

  The idea has already crossed your mind that I could create a recurring SQL task that runs a query to update with terms such as "If the time zone is set to undefined, then set the time zone to match the organization."  However, I prefer not to do this way and use the system as it was designed, and using the SQL task would mean that those imported would have a time zone is not defined until the SQL job runs.  Someone at - it suggestions on how I can get around this by using standard parameters within the system?

  

  Hello

  Few things currently comes in my mind:

  * If it is possible to store the zone information in AD (to use any unused property or extend the schema with a custom). You can then map this property in your integration with field tz people rule. The worst thing - you need to manage updates (for example, script) of your users AD setting the values of the source (maybe the one you use for synchronization of organization vsm) tz.

  * You can create the SQL update for the AR_CLIENT_COMPANY table trigger to replicate the TIME_ZONE_REF value for all users in the current organization.

  I always have the feeling that it is possible to manage that with vsm rules of integration, but we should go deeper into your infrastructure, for example maybe you can update vsm people of the source you use for organizations.

  G

• Display data DateTime Fields in the local time zone

  I have a table defined as follows:
  
  create table TimeTest
  (
  DATETIME TIMESTAMP (0) WITH TIME ZONE
  )
  
  I insert two lines where the time zone changes to a date given in the spring:
  insert into timetest values (datetime) (to_timestamp_tz (' 08/Mar/2009:01:59:55-0500 ',' DD/my/YYYY:HH24:MI:SS TZHTZM ""));
  insert into timetest values (datetime) (to_timestamp_tz (' 08/Mar/2009:03:00:00-0400 ',' DD/my/YYYY:HH24:MI:SS TZHTZM ""));
  
  How can I select the datetime field in the time zone of my choice? If my session time zone is - 0400, should not 01:59:55-0500 displayed as time 02:59:55?
  
  The session time zone is:
  Select double sessiontimezone;
  -04:00
  
  So why do I get this:
  Select to_char (datetime, ' DD/my/YYYY:HH24:MI:SS TZHTZM "") of timetest;
  08/Mar / 2009:01:59:55-0500
  08/Mar / 2009:03:00:00-0400
  
  I thought I would get this result instead:
  08/Mar / 2009:02:59:55-0400
  08/Mar / 2009:03:00:00-0400
  
  Thank you
  Troy
  
  Published by: cforasun on April 8, 2010 17:36

  It is stored as a timestamp with time zone, so you must cast in the local time zone for your database:

  Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
  Connected as fsitja
  
  SQL>
  SQL> create table TimeTest (DATETIME TIMESTAMP(0) WITH TIME ZONE);
  
  Table created
  SQL> insert into timetest(datetime) values (to_timestamp_tz('08/Mar/2009:01:59:55 -0500', 'DD/Mon/YYYY:HH24:MI:SS TZHTZM'));
  
  1 row inserted
  SQL> insert into timetest(datetime) values (to_timestamp_tz('08/Mar/2009:03:00:00 -0400', 'DD/Mon/YYYY:HH24:MI:SS TZHTZM'));
  
  1 row inserted
  SQL> commit;
  
  Commit complete
  SQL> select datetime, cast(datetime as timestamp(0) with local time zone) from timetest;
  
  DATETIME                                          CAST(DATETIMEASTIMESTAMP(0)WIT
  ------------------------------------------------- --------------------------------
  08/03/09 01:59:55 -05:00                          08/03/09 03:59:55
  08/03/09 03:00:00 -04:00                          08/03/09 04:00:00
  
  SQL> 
  

• database time zone issues

  Hello

  I fell on the database time zone parameter that can be given with the CREATE DATABASE statement. However, I have found that not all databases under my control have the same time zone (some are custom databases (DBCA), some are base model). But as the affected applications only run in one country I think they should all have the same. As no timestamp with local time zone is used, I can change it with a restart. However, some questions came I couldn't find no response yet:

  1 documentation recommends to set the timezone UTC (+ 00:00), but does not give the reasons why. Anyone know what is the advantage compared to the local time zone?

  (http://docs.oracle.com/cd/E11882_01/server.112/e10729/ch4datetime.htm#NLSPG262)

  2. set a fixed offset (+ 01:00-08:00) causes to ignore changes to the DST, correct? Therefore, it is best to use a name of region (Europe/Berlin or Asia/Kuwait), right?

  3 do you know of any issues that may arise right after having changed the timezone of db?

  THX.

  Robert

  ------------------------------------------------

  DB 11.2.0.4 (EE & SEOne)

  Hi Robert,.

  Please check

  Time clocks & time - zones frequently asked Questions (Doc ID 340512.1)

  (3) what is the time zone used for database? And what is not?

  Any additional help is more welcomed
  Please mark the post as useful/correct your judge to help others find the answer.

  Kind regards
  OLA Yehia