help me to build a table as follows

Similar Questions

• build the table when values change at run time

  Hi all

  I have a continuous stream of frequencies that continue to change during execution. I need to make a table of these values. I use the array build function. This option stores the first value only and the order of the day replaces the stored rather than settle down after that. I was going through the examples of labview and I think that by using the shift register can somehow solve this problem. However after an hour of futile play with lag, while loop records and build blocks table that I decided to post on this problem. I would like if someone can delete my concepts as well as a solution. The conceptual linkage is for what the first value to maintains have replaced. If I use the table of generation block the values that come should then fill the following vacant location logically. Instead, it replaces one only.

  You are right that I have simply the case that I warned the first sentence.

  Other methods require a certain amount of planning on the structure of data-handling. It is suggested at least...

  A better approach would be something like a circular buffer where you initialize an array of the desired size (for example 10000 items) and then start to replace the items. You can use the iterator of the loop you have to 'reduce' using quotient & reminder (which is the 'modulo' mathematical operation).

  hope this helps,

  Norbert

• How can I write time to build the table in just a few seconds?

  Hello world

  I am able to use "elapsed time" to send a time stamp to "build the table" using the output of 'elapsed time to text.  But after 59 seconds, it gives then a minute.  In the excel file, it is as follows:

  0 00:00:59

  0 00:01:00

  0 00:01:01

  I want to continue to 60, 61 seconds and so fourth.  When I try to connect to an another Subvi, it gives me a connection error.  Any help would be greatly appreciated?

  Thank you

  Ferriol

  I guess that's the Express VI, you can use the output of the time elapsed (s) instead of the number of seconds passed.  If you want a string, use the Format String VI, or build an array of DBL to add to the rest of your data.

• How to build a table of measured data permanently

  Have a good day for everyone,

  I have a problem about the construction of a table permanently. I tried to find the solution for a long time, even if it's a task really simle.

  I want to build a table permanently, virtually:

  I like to read data from a measuring devices and I would like to sotre it one by one, at all times. I made a simple VI to present one where my problem is. The random generator represents the data given the measuring device.

  At currently I am able to store data only 1. When I want to store then that it is crushed.

  Thanks for anyone who can help me.

  Hi LIG.

  no need for a structure business when you can use autoindexing:

  

  Also, the code snippet shows how to convert a number in your reading string. You probably prefer tanks instead of integers...

• How to build a table of TDMS file open

  Hello

  Examples NI TDMS - Express write data .vi (time domain), I can build a PDM file with 2 channels (sine and square waveforms) data, which are stored as test.tdms.

  Using Express read .vi data (time domain), 2 channels of waveform data are read. How to build a table later? How to separate the 2 channels of data in the tables 1-2 and manipulate the data using table functions?

  For example,.

  I want to collect 100 from index100 between channel 0 and their average. I want to take 50 samples from the channel 50 1 index and double each element.

  Thank you for your help.

  Bing@NCL

  Hey Bing.

  You can perform operations on different channels in the 2D table using the table to index. This will allow you to choose the channel to operate on, then you can perform the operation inside a loop on each element. In the included code snippet, I used a shift register to find the total cumulative values in channel 0 and then divided by the number of samples.

  I recommend you read some tutorials LabVIEW and bases of knowledge on topics that are related to yours. These could help a lot.

  I hope that my suggestions help,

  Chris

• Build a table 1 d of sequential data for analysis

  I have an executable that needs to cycle at least 10 times and then check to see if the last three load average values lower than 5%. If so, I can cancel the executable, but otherwise I have to keep cycling until this is true. As it is now my executable is not fully implemented for this last requirement because I'm stumbling over how to build my data table. I tried a few methods different but all keep changing one value with one another, and I'm not sure how to implement some of the loop I saw here in similar cases. I have now so I can build a table once my iterative loop is finished, but I wish it were on the fly and re-enter the cyling process if necessary.

  I would greatly appreciate any help someone who is actually competent could provide. I have attached the code (version 8.5).

  Let's try this one.

  In the table of construction (with the concantinate mode on...) new data are added to the table first, not the last.

  The table is based and as it builds, the first (latest additions) three elements are averaged and then checked against a constraint of difference you set on the top of the screen.

  Sorry for the first code... I have yet to understand all these things of table.

  It works as expected.

• How to build a table using incoming data stream?

  I'm programming in VBAI but use LV as my Interface of Inspection. The VBAI program will go into a finite loop (x 1000) and the digital indicator with dbl vaule of food in front of the LV Panel if the value double is in order.

  In LV, how to build a table (index 0-999) with this stream?

  
  

• How to build a table in a master/slave relationship?

  Hello NOR community,

  I can't build a table in a master/slave relationship. I want two paintings to be built for a fixed amount of iterations, once press the 'pressurization '. (This data acquisition would occur only once per program). I am new to Labview so I apologize in advance for my layout disorder.

  I want the slave program to create two tables and analyse the slope of pressurization to arrive at the same time as the master's program and the master program to continue to acquire data of pressure.

  Master slave relationship is even necessary here? How to pass a variable (pressure main once a loop without getting stuck in a nested loop situation?

  Here is a small example, just to show an idea (many things is not optimal in this example!). Based on your VI you have attached, you miss a lot of basic concepts of LabVIEW, you go through online training.

  

• Build a table or merging of signals?

  I know that there is more than one way to merge waveform signals to display in a waveform chart. The two that I know are a fusion signal express vi and build the table. But I was wondering which of the two were more effective. I read once somewhere in this forum that this "generation" is one of the tasks much more time.

  Not very critical of what I'm doing (a data acquition loop takes a few milli seconds with table generation) but was just wondering if one or the other has a better way to do it. Or it could both be the same.

  Thank you.

  If I understand correctly, you only build a piece of data in an array of 1 x 1 each time through the loop.  If this is the case, then there is no problem with the way you use table build and build waveform to get your data on the graph with the timestamps of law.  It is perhaps not the most effective approach, but at a rate of 200ms update, you are unlikely to have problems.

  Build problems when you add constantly in an existing table because the table maintains more and needs to be reallocated whenever a new item is added.

• How to build the table with all the combinations of a source table?

  Hello

  I have a 2D array that contains the list of the power user-defined settings. The number of PSs (table rows) is not fixed. For example - 3 PSs:

  Stage of Min Max name

  PS1 3.0 3.6 0.3

  PS2 0.9 1.2 0.1

  PS3 1.7 1.9 0.1

  I need to build, from this list, a table of all the combinations as below:

  PS1 PS2 PS3

  3.0 0.9 1.7

  3.0 0.9 1.8

  3.0 0.9 1.9

  3.0 1.0 1.7

  3.0 1.0 1.8

  3.0 1.0 1.9

  3.0 1.1 1.7

  3.0 1.1 1.8

  3.0 1.1 1.9

  3.0 1.2-1.7

  3.0 1.2-1.8

  3.0 1.2-1.9

  3.3 0.9 1.7

  3.3 0.9 1.8

  3.3 0.9 1.9

  3.3 1.0 1.7

  3.3 1.0 1.8

  3.3 1.0 1.9

  3.3 1.1 1.7

  3.3 1.1 1.8

  3.3 1.1 1.9

  3.3 1.2 1.7

  3.3 1.2 1.8

  3.3 1.2 1.9

  3.6 0.9 1.7

  3.6 0.9 1.8

  3.6 0.9 1.9

  3.6 1.0 1.7

  3.6 1.0 1.8

  3.6 1.0 1.9

  3.6 1.1 1.7

  3.6 1.8 1.1

  3.6 1.1 1.9

  3.6 1.2 1.7

  3.6 1.2 1.8

  3.6 1.2 1.9

  How to build this table programmatically?

  (Note also that the number of rows in the source table is not fixed).

  Thanks in advance!

  Hi Berezka,

  using a magic of automatic indexing:

  

• Please help me my build in dreamweaver keeps saying error generation

  Please help me my build in Dreamweaver keeps saying build error he repeats to me could not download application what do I do help

  You must create a config.xml file and attach it to the same level as your index.html file.

  Make sure that you reference the correct docs.

  But it's the place where our set all of the properties of your applications.

  Chris

• Need help with Flash Builder

  I use a flash 4.5 adobe generator,

  Recently, I created a login page in flashbuilder... On my page, there is a button link [say registry]

  I created a form of Regisistration.

  Now how to bind this registration form with a link button [register] to my login page...

  Can someone help me!

  Hello

  The following link will help you. Please go through it.

  http://help.Adobe.com/en_US/Flex/using/WS2db454920e96a9e51e63e3d11c0bf63611-7ff2.html

  Thank you and best regards,

  ------------------------------------------------------------------------------------------ --

  Vibhuti Gosavi . [email protected] | www.infocepts.com

  ------------------------------------------------------------------------------------------ --

• build the table by concatenating berries 2

  Greetings,

  I have the need to combine tables 1 d (Qty 2) to TestStand for the first time each. They both will always be the same size. I would build by concatenating.

  Table 1 (String): some number 1, some number2, some Number3

  Table 2 (string): string description1, description2 string, string description3

  Output array: some number 1 string description1, some number 2 string description2, some Number3 string description3 (so it would be total 3 items)

  Thanks in advance for any help.

  Chazzzmd

  Hello

  You can concatenate 2 strings in TestStand using the operator ' + '.

  Example:

  Locals.Output = Locals.String1 + "" + Locals.String2

  Concatenate individual pieces of the string into arrays of strings, an easy approach would be to use a loop structure to browse table and concatenate all of them. Please find below a sequence file simple (I created it in 2010 TestStand) it does using the "For Each" as well as "Looping" property loop structure within the parameters of the step. I hope this helps you.

• Help for the reconciliation of table. Average cost

  

  So this is my attempt to imitate a function block that we use in our standard converter software - "Decimation filter" which is nothing more than a running average / mobile. The sample size is adjustable to execution of 2 to 64 samples (decimation factor). I saw many topics on this and used to average around 4 large samples shift registers - but I wanted to be able to change the sample size without recompiling. I'm new to LV, there is likely a lot of better ways to do this.

  I would like to have answered is linked to clear the table, if the decimation factor is set to a lower number than the last time that the loop executed. (The uppercase - false statement is wired directly by)

  The math in the shift register: creates an array index that cycles from 0 to (decimation Factor-1). The index is then used to fill elements in the table (the rest being zeros). When the decimation factor decreases, I need zero external element in (former decimation factor - 1) (new decimation Factor-1) positions. So I tried various things, but the only thing that seems to work, it's the re - initialize the array. I think it's less than optimal.

  I tried:

  (1) leaving the tunnel of continuous wire output for the real deal and selecting the option 'use default if unwired' - thinking I'd get a table of 64 elements, of zeros. Doesn't seem to work.

  (2) a constant matrix cable tunnel exit if this value is true. When I followed him, after a decline in decimation factor - the probe seems to indicate an array of elements, not 64 No. And I do not see how to specify the size of the array of constant matrix.

  If I use this in my application it will run on a target of cRIO.

  Any help much appreciated.

  You already have your initialized table, why not use it?  Wire your table initialized via if this value is TRUE.  Or better yet, use Select? function.

  

• Help required with Build of Windows not genuine

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 74XYM - BH4JX-XM76F
  The Windows Product Key hash: KeYfcvXg/a1Q01x73 + f8IL/JC4Y =
  Windows product ID: 00359-112-0000007-85471
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {B5138A86-A74D-40E4-8375-86E6E734CFB1} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a
  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002
  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002
  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed
  Analysis of file data-->
  Other data-->
  Office details: {B5138A86-A74D-40E4-8375-86E6E734CFB1}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-XM76F00359-112-0000007-854715S-1-5-21-4203167718-1964513498-3843401065Hewlett-Packardp7-1007 cAmerican Megatrends Inc.. 6.11 20111228000000.000000 + 000D8BB3E07018400F404090409Time(GMT-08:00) Standard Pacific03HPQOEMSLIC-CPC109  
  Content Spsys.log: 0 x 80070002
  License data-->
  The software licensing service version: 6.1.7601.17514
  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00170-112-000000-00-1033-7601.0000-1872013
  Installation ID: 014995665130071472847356144860222392052571458596790191
  Processor certificate URL: http://go.microsoft.com/fwlink/
  ? LinkID = 88338
  The machine certificate URL: http://go.microsoft.com/fwlink/
  ? LinkID = 88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: XM76F
  License status: Notification
  Reason for the notification: 0xC004F031.
  Remaining Windows rearm count: 3
  Trust time: 06/12/2013 23:27:36
  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C533
  Beyond: 0 x 0000000000000000
  Event timestamp: 12:6:2013 23:16
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  --> HWID data
  Current Hash HWID: MAAAAAEAAgABAAEAAAACAAAAAgABAAEAonY8VDRcVPkgkUqzVMjqRQKo5qYA + xh5
  Activation 1.0 data OEM-->
  N/A
  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  SRAT HPQOEM SLIC-CPC
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  LASRYVITRAGE HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC
  SSDT HPQOEM SLIC-CPC

  Your message has been split from the original thread because it was a completely different issue from what has been discussed here. It can become quite confusing talk more than a complex issue in a single thread.

  I think that this message of Christmas Paton is likely to be the way to solve your problem:

  Windows complains because he thinks that the hardware has changed - you will need to use telephone activation.

  There is no sign that the installation is a counterfeit - do you have the original packaging?

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers
  No - I do not work for Microsoft or one of its contractors.

  http://social.technet.Microsoft.com/forums/Windows/en-us/328a7ac8-796c-4EDB-80f3-6568d5e35b26/Windows-7-32-bit-to-64-bit