Help me with Encore CS6 Menu and buttons

Similar Questions

• Office restarts itself when it is stopped with the start menu and the power button.

  Original title: stop problem

  My office will restart itself when it is stopped with the start menu and the power button. I went to the start menu task bar to ensure that the setting was correct.

  Hello

  1. Press (Windows key) + R and type "regedit" and press enter.

  Find the following key:

  Geographical area: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  3. double-click on "PowerdownAfterShutdown.

  Then,
  Change it to '0' if it is '1' OR
  Change it to '1' if it is '0 '.

  And press ENTER.

  Then reboot andtry to stop.

  If this does not work, make sure that you change the value in regedit back to what she was original

  Try this one:

  Put the laptop to sleep then let it restart itself. Then run command prompt and

  Enter 'powercfg - lastwake. It should give you the description of what caused the alarm.

• I have Production Premium with Encore CS6.  I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03".  How do I get this project on a B

  I have Production Premium with Encore CS6.  I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03".  What should I do to get this project on a BluRay disc?

  In response to both Richard & Stan.  I received the error message ""device error", Code '3' notes Create Sequence of STC: cannot write file M25.»  Or something very similar to this, but I think it was exactly that.  It was my first HD project but used several times to make projects sustainable development without problems that were not of my own creation.  So it was a shock and cost me money and the failure to meet a deadline.  What I did: on-screen 'Build '.

  Format: Blu - ray,

  Output: Blu - ray Image,

  Source: Currrent project,

  Destination: I Browse... d a location appropriate.  He managed a Blu - ray image.

  Using reminder once again, step 2 - on-screen 'Build '.

  Format: Blu - ray,

  Released: Blu - ray Disc,

  Source: Disk Image,

  Destination: my disc drive that holds a blank Blu - ray disc.  He managed a Blu - ray disc.

  Then I found a job step 2 autour for the problem.  My question is this: I pay $70.00 / month ca to the people Adobe cloud to keep their software up to date and work as advertised.  I do not think I should spend a few hours and lose money looking for a problem created Adobe not yet keeping cs6, updated and works as promised.  I submit my first bug report.  My suspicion is that adobe considers that Blu - ray is out of style, and they do not care to correct this bug in still cs6.

  I'd love to know the thoughts of others on this.

• I had someone to help me with a computer problem and they removed my editions CC2014 for the PS, Illustrator, InDesign and Acrobat. How can I reinstall?

  I had someone to help me with a computer problem and they removed my editions CC2014 for the PS, Illustrator, InDesign and Acrobat. How can I reinstall?

  Refer

  Using creative cloud | Install, update, or uninstall applications

  If previously produced was not uninstalled properly then you can required to run CC cleaner once the tool and remove them

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Adobe is allowing to download first with Encore Cs6?

  I need authors a DVD and you want to reuse again. Is this possible?

  Yet the instructions http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html if you have a subscription

  - and the difference in the Cloud application manager 2015 https://forums.adobe.com/thread/1906752

  -more step by step on this difference https://forums.adobe.com/thread/1906752

  - and Win10 and install https://forums.adobe.com/thread/1934087 again

  N ' install, but no desktop icon created during the installation process, must then MANUALLY find the EXE program

• Help: Problem with scrolling my html and objects they keep practicing on my main menu

  Basically whenever I have put an html element in my site of Muse or any other object that I encounter a problem when scrolling downwards beyond this object in the preview. I have a menu bar horizontally located on the top of my site and whenever I scroll html elements and objects

  cut through my menu. Is it possible to fix this? -J' tried pinning of items but may not know. Any help would be greatly appreciated.

  Thank you

  So, you have a Menu pin in the master page but are bunk by page objects when you scroll down? If this is the case, select the Menu in the Master, right-click on it and move to master in the foreground.

  Thank you

  Vinayak

• Help with the Spry menu and templates

  Hello. I'm still learning Dreamweaver and stumbling through this all on my own. I just discovered models today and I'm hoping to use them to update my menu2 spry navigation bar. Except that it does not work for me. Is it because you just can't do that with spry? The menu does not update correctly when a new file with the model is stored in subfolders.

  I have the site set up with everything in the folder under the root except for the home page index.html file.

  so it's like this example:

  http://www

  about/mission/index.html

  When I go to new-page open-model the temaplte and save it in the folder... links from the template do not update correctly.

  They look like this:

  model is bound as follows in the models folder in my root directory:

  .. / about us

  .. / about / mission

  the index in the all file page is linked to this:

  .. / about us

  subject/mission

  The files inside the records change perfectly. But no matter what I do the topic of navigation does not update right. What's meaning? I can't understand how to post code here!

  No not really... list of default file name? I mean if I type in http://websitename.com/about/ it will go get the index.html file in this folder.

  It will be?  Then a similar link in your page should work.

  What happens when I use this:

  Mission

  is that it does not change in the subfolders. The... / the rest when it should not. Now I have not downloaded with links like this. I know that it doesn't work on my computer but when I look at the code I can see that the code is wrong.

  Look in the Site definition advanced settings > models > don't rewrite paths related document.  If this is true?  If so, uncheck the box.

• After upgrade, I can't navigate. When I click the icon, I get redirected to a sterile help page, with no way out and no navigation State. Help?

  I can not navigate on at all. I installed 20 FF, and when I try to activate I get redirected to a support deadend page. Before the upgrade, I uninstalled the previous version, which worked very well.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Problems with my toolbar menu and start pin

  While typical work on the internet, my browser closed its own and restarted my computer. Once again, it does the same thing: closing the browser and restart. Next time, that it restarted, I got a continuous pop to the top of a windows application requesting permission to access my computer (I have never launched and continually decreased). Then I had a series of pop ups and warnings, etc.

  Now, when I opened my Start menu, everything disappeared except 'all programs', 'search' and 'close '. Also, the icons located next to the time and date in the lower corner expanded how to a third party in the toolbar with no option to shrink. Finally, everything that had already been pinned to the toolbar disappeared and when I open a folder or a browser, it appears broadly and do not stack so organized, similar to how previous windows systems displays this information.

  How can I find these questions to their normal state?

  Hello

  What antivirus application is installed on the computer?

  I suggest you follow these methods and check.

  Method 1:

  Step 1: Restart your computer in safe mode and check if the icons are moved.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in safe mode, try to perform a clean boot in order to find the root cause.

  Step 2: Perform the clean boot using the suggestions mentioned in the link mentioned below.

  http://support.Microsoft.com/kb/929135

  NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Accidents with internet explore, check out this link:

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Also perform a full service scan using the Microsoft Safety Scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the method above does not work, proceed to the next method.

  Method 2: Run the system restore.

  Restore the computer to the date where it worked great:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps!

• I can't open the pictures and need help please with my Windows Vista and the WindowsLivePhotogallery error Code: 0x8007007e. Carole

  I have a Windows Vista laptop with many pictures.  I can not open the photos on my Windows Live Photo gallery and have received

  Error code: 0x8007007e.

  How this can be solved?

  Thank you.  Carole

  This forum is for Microsoft Security Essentials.

  Please go to the Windows Live forum to get help.

  http://windowslivehelp.com/

• Please help me with the video card and power supply issues!

  Hello and thanks in advance for any help. I'll try and do a short explanation, but I can't promise anything. I bought an a6620f Pavilion about 2 months ago I didn't know that you had to purchase a special hardware in order to play video games. In any case, I bought about 300.00 worth of new video games and none of them works. they say because of my video card. Then try to buy a new video card and it won't work because I only have a 250 watt power supply. I spoke with a hp technician before you buy a PSU and I was told that my motherboard was only designed to use a 300 watt max power I tried to buy one at best buy and the clerk said 4500 is the smallest they sell. and I need at least a 400 Watt or powerrsupply to make the new video card with a value of buyiong. My questuion is what can I do if I can't buy one more big power supply how can I install a new video casrd? Please help me I'm lost

  Oh and in case you want some specs on my system here are a few

  Windows Vista Home premium service pack1
  HP Pavilion a6620f
  Processor: pentium dual core cpu e5200 @ 2.50 GHZ
  memory: 4.00 GB
  system type: 64-bit operating system
  Version of DirectX 10
  graphics card: intel GMA 3100 Total memory 256 MB

  Message edited by chefinomaha on 06/03/2009 16:38

  Hi chefinomaha,

  Sorry to hear about your frustration. Here's some good news.

  I think you have been misinformed or there was a communication error. Your motherboard should not be limited to the only 300W. I don't know with certainty how high you can go in watts, but you can go higher and should go higher, if you add a video card.

  The important thing is to get the right kind of diet that fits your connectors.

  Here's your motherboard page.

  Here is a document with step-by-step instructions and video for adding a video card.

  Here is a document with the video to replace the power supply.

• Can someone help me with a function a little button?

  I'm working on a project and a small part of this project is to create a counter increases by one whenever a button is clicked. For example, I got a picture of a much simpler version of what I do. For some reason I can't just code so that whenever you click on the gray rectangle text increases by one and then two and so on.

  

  Get this code in your publication

  In the case of loan Compostion:

  sym.setVariable("counter",0);

  Have this code in the click event of the Rectangle :

  var counter = sym.getVariable ("counter");

  counter ++;

  sym.setVariable ("counter", counter);

  SYM.$("text").html (Counter);

  In the snippets above, the text field is reset to 0 each time that you refresh or reopen the page.

  Hope this helps you

• problem with the command stop and buttons

  Hello world.

  Here's my scenario

  I have a project where I have 5 buttons (all on separate layers) I want to put a link to the image 2, image 3, image 4, part 5 and part 6.

  Thus, for example, I want my topic is to link to the Framework 2 and last new button, to link to the image 3

  The separate pages are housed on the layer 'layer of page '.

  Please see the image below to see what I mean

  

  I'm using the code snippets in cs5 to do this, so I am using the command "click go to frame and play" and change the number of the framework accordingly.

  My problem is when I use the command to stop on the first frame. If I do not use the command the swf allows to select the 6 images constantly, but when I use the command stop buttons do not work because the application has stopped.

  Anyone could shed some light on this problem?

  It may be a case for the use of your gotoAndPlay() where you need gotoAndStop().  If you are on the frame you say to go to play, he can't go anywhere to get there, and stop it is already sold out, so it will play thru to the next stop.

• Firefox 4.0 Windows 7 a site looks good in Solution Explorer, but the menu and submenu appears wrong with Firefox. JavaScript is enabled. How to fix?

  I made a website and it seems fine in Internet Explorer with the Windows 7 operating system. When viewing with Firefox main menu and submenus look bad and the submenus are not usable because they appear on top of the main menu. How can I fix it?

  As a starting point, I recommend the more liberal DOCTYPE (that I listed above).

  position of cor - el shows a change at one of scripts on your site so that the number of pixels is followed by the letters "px" (Firefox requires measurement units, in this case, the pixels).

• Conflict with Superfish menu and WowSlider

  I thought I should start a new thread about this. I bought a license for WowSlider, troubleshooted almost all issues (menu hidden behind the cursor has been resolved by resetting the z-index for the menu at 101, WowSlider is set to 100). However, the questions continue with the menu. I have even the z index-999 and added a bunch more of the values of z-index in different parts of the menu in css.

  I narrowed down it to her being related to have several jquery objects in a page. I have a conflict with the Superfish menu and the WowSlider - on the homepage, where is WowSlider. The forums suggest to insert the noconflict code depending on whether I did but he did the menu fail completely.

  < script type = "text/javascript" >

  jQuery.noConflict ();

  var $j = jQuery;

  < /script >

  I need to do more with this noconflict command but cannot find an example I understand. Your most appreciated expert advice. I hope that I am close to the resolution of the problem.

  Thank you.

  https://micounties.org

  The JQuery forum solution, for those interested. I had to move the section script to the head of Wowslider (of Wowslider) to the top of my list of scripts - I had it below. It worked.