HELP - modem may not be detected in 10 WinFax?

Similar Questions

• CD-ROM may not be detected

  Hello

  My CD-rom can't everyday detect, can you help me solve the problem?

  And in my computer can not find the CD-ROM drivers.

  Hope can get the answer soon...

  Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CARD reader may not be detected for Toshiba Satellite A100 (PSAARE)

  Hi team,

  Please help, as I have Toshiba laptop with model Satellite A100 (PSAARE) which had Vista then I upgraded with Windows XP, now my all software works except the card reader which doesn't detect any card of same SD memmory so that the driver has been installed... Please sat down

  Are you certain that the card reader has installed the XP drivers (and they are the exact brand and model of player)?  This is an internal or external card reader?  I suggest that you check with Toshiba to make sure you have all the drivers, firmware, or software required for the card reader (it may just be a pilot - it may need more).  I would also re - download the driver and uninstall the old and reinstall a new where the original has been corrupted for some reason any.  Are you sure that even with the drivers, that this computer model can handle XP completely and that you are not a problem of compatibility (I contact Toshiba Technical Support and confirm what you've done is perfectly possible, including the card reader).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help! May not reflect 2009 Macbook Pro to TV via Apple TV3

  Hey all,.

  Hoping someone can help here. What do I need?

  I have a Macbook 2009 mid Pro, completely updated through this date with El Capitan, 14/02/16.

  I also have a 3rd generation Apple TV, that I would use to reflect what's on my Macbook to my television.

  Some of you experts here ask how do and (as appropriate) what cables I need to do.

  Not sure if Airplay is an option, because I do not see in my tabs.

  Thank you in advance-here is a picture of my installation.

  

  Getting mirror requires a Mac in 2011 or later. You use a 3rd party like Airparrot program, the results vary so use the trial first

• Problem status Microsoft 6to4 has a driver problem detected other Solutions to adapt Hardware Exchange may not detected

  Map Microsoft 6to4 has a driver problem	Detected		Other Solutions
  Hardware changes may not have been detected

  Hi M. - Tottimeemoo.

  According to the description of the problem, it seems that you are having problems with "Microsoft 6to4 adapt has a driver problems. I will defintiely help you with this question.

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you to see link below and check if it helps.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520
   
  Method 2: I also suggest you to uninstall and reinstall the network card and check if that helps.
  http://TechNet.Microsoft.com/en-us/library/cc753699 (v = WS.10) .aspx
   

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• No Audio / noise coming from my speakers, get the message: "material changes may not have been detected." When I click the speaker icon to troubleshoot

  Recently, my son plugged his headphones Turtle Beach X 12 in the front USB and my computer's audio input. Since he took the helmet, I have had no audio of my Logitech speakers.  When I click the speaker icon to get out of trouble, I get this message: "material changes may not have been detected." When I go to my control panel to manage my audio devices, I get a message that says no audio device is installed. I tried the simple things like the removal and reinstallation of my speakers and tries a recovery to date before my son his headphones plugged the computer, but those who have not yet worked. I have to uninstall and reinstall my sound card?

  Hello

  Which could be necessary, but first, first try the software road. Try the steps in this tutorial and see if that solves the problem: http://windows.microsoft.com/en-IN/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• Freezes in Windows 8, "material changes may not have been detected.

  A few days ago my laptop speakers have not worked or stopped working suddenly, although it reinstall the drivers. Last night, I installed a group of updates (not counting the 8.1) to my computer and that seemed to solve the problem of speaker but ever since then it has been freezing. First regardless of the application I have open (google chrome, my antivirus software, whatever it is) suddenly doesn't respond. Then, the entire computer freezes - the clock to stop, I can't click on anything whether or get into the Task Manager but the mouse still moves. This stage lasts 30 minutes and arrives at least once every two hours - usually, I pressed the power button to turn off, but last night I just closed the lid and went to sleep. This morning, I ran the hardware and devices Troubleshooter and received the message that "material changes may not have been detected. I don't know what to do.

  Hello, Léa,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause.

  The error message you get may be due to a service that is not running or if the race is not defined as automatic.

  You can try the steps below to check the status of service.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Look for Windows Installer service.
  3. Check if it is started, if not, right click on the service and click Start.
  4. Right-click on the Windows Installer service and select Properties.
  5. In startup type, select Automatic.
  6. Then click on apply and OK.

  If the problem persists, you can follow the steps in the Microsoft article provided below and check if that helps.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Error: "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  Original title: my sound card is missing or disabled?

  My sound worked very well with some speakers the other day, when suddenly it stopped working. The sounds again, but with sounds such as those where an error message is displayed is not default reading/game audio is not.

  I recently got this computer work again once I've been using another computer for awhile, so I was messing around with some parameters that could be the cause of this.

  One of my games says my sound card's 'missing or disabled', & iTunes says "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  Thanks, Toby

  Re-install the drivers audio from the website of the manufacturer of the PC/laptop.

  See you soon,.

  Jerry

• On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

  On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

  I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

  Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

  Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

  Could you please explain whats wrong and tell me how to fix this please: D thanks

  Hello
   
  1. don't you make changes before the show?
  2. is the computer is joined to the domain controller?
   
  You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
  1. connect to another user account and create a new user account to fix the damaged user account.
  For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Previous post the results in more detail, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly.
  I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
  I mean that he can call on a mobile phone or phone of the Earth.

  A few times he suddnely connects but connected sppedis 24kpbs.

  But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Hello

  I don t think that the modem would be malfunctions.
  Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

  I recommend you configure the modem again.
  In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
  Delete the existing profile and create a new!

  Best regards and good luck

• Satellite A100: USB and Modem does not

  Hello!

  My name is Clarisse and I have a Satellite A100, which I use for school. I'm having a problem with its usb ports and modem.
  When I try to connect to the internet, he just say he of no tone and tells me to ensure that lines are connected, who they are and the phone line works certainly, as I checked with my PC and I also checked the phone if it was busy, it wasn't.

  I then try again and a window appears and says that there is something wrong with my modem, how can I fix?

  The other issue is my usb ports who refuse to work, they can't recognize anything I plug (for example, bluetooth adapter, flashdisk, ipod) even though they are installed!

  However, the strange thing is that when I plug in my printer it connects and does its job:(je suis tellement confus et scolaires est devrait commencer bientôt.)

  Can someone help me please?

  Thank you
  Clarisse

  Hello

  In my opinion the modem connection does not work due to the modem settings.
  Go to Device Manager and select the properties of the modem.
  Please select the Modem tab. You will find the option "wait tone before dialing." You must disable (uncheck) this option.

  I guess that the USB ports cannot recognize the external USB ports because of the power.
  The USB ports provide 500mA. It is a standard USB. If external devices use a power greater than 500 ma, so it is possible that the device may not be recognized.

  In such cases, the USB hub with an external power supply can solve these problems.

• HP Elitebook 8560p: Windows 10: Elitebook 8560p; WiFi button is not working, Wifi - and internal 3G modem does not work

  Mobile: HP Elitebook 8560p
  Bios: 68SCF worm. F.6.1
  Modem: AGERA Systems HDA Modem
  HP hs2340 HSPA + Mobile
  Network: Intel (R) (R) Centrino Advanced - N 6205
  Intel (R) 82579LM Gigabit Network Connection

  OS: Windows 10.0 (build 10240)

  I've updated HP Elitebook 8560p of Windows7 (64-bit) for Windows 10. The upgrade process was successful. Later, I noticed, Wifi and 3 G-internal modem does not work. Sametime, I noticed, that old HP Connection Manager has been uninstalled (or lost?).

  The problem is basically this: Wifi - and connections 3G internal modem does not work. I noticed, that wifi-button has "orange" color and the button does not work? I can't change the Wifi status parameters at the level of the OS of Off to On. That's why assume that the wifi module is on "off"-"State. I found the driver SP7107 (driver Wifi for Windows 10 button) package and I tried to install it. The installion failed because InstallDriver_64, location failed. (In Finnish language. Toiminto InstallDriver_64, may c:\...\WirelessbuttonDriver.inf' / installdrv/force). Is there an instruction manual to install the driver?

  I'm very confused and I don't know really, what is the first cause of the wifi - 3 g-modem internal questions and. I guess, this wifi button is not about root work.

  Can someone clarify why there are not more HP Connection Manager on Windows 10 and I tried to install, but install cancelled due to bad BONES. How can I manage wifi - and States of modem 3g without it?

  If anyone can help?

  A big thank you!

  Sip2sip

  Uninstall the access key and button wireless driver

  Reset

  Open Device Manager, run the dirver update

  shouldn't this go

  Download Connection Manager

  FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66235.exe

  Install the program in Compatibility Mode in Windows 7

• Problem with the modem does not

  I come from Netflix through Wii I can get on it and upload a movie, then when I go back and try to get another or do something else, he says I am offline. The modem no longer works. I can't use WiFi on Iphone either. I can close my modem for a bit then he put on my internet Iphone works and will Netflix. I get Netflix early looking around, then he'll do it again.

  Thanks for any help.

  Let's see... your post included Netflix, Wii (by Nintendo), iPhone (by Apple), an unidentified modem (which may or may not include your wireless router) and does not mention your ISP.  Why do you ask your question in a forum of Windows XP?

  Just guessing, but I would say you should replace your wireless router or talk to your service provider.

• Yahoo: 'Sorry, comments has not been loaded properly. things may not work. "Circle of rotation... IE works fine.

  YAHOO comment section: "sorry, comments has not been loaded properly. things may not work. "I get a radial circle of spinning - not to load the comments. Firefox 8 worked well. Help?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes