CD-ROM may not be detected

Similar Questions

• DVD - ROM can not be detected on satellite - corrupt or pilot missing (Code 39)

  My laptop does not detect dvd - rom, is there any solution for this?

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Hello

  The description of your problem is very bad. I really don't understand is there any problem writing a few sentences more and explain the problem more precisely.

  Anyway, please try this http://support.microsoft.com/default.aspx?scid=kb;en-us;320553

  Maybe it helps you!

• CARD reader may not be detected for Toshiba Satellite A100 (PSAARE)

  Hi team,

  Please help, as I have Toshiba laptop with model Satellite A100 (PSAARE) which had Vista then I upgraded with Windows XP, now my all software works except the card reader which doesn't detect any card of same SD memmory so that the driver has been installed... Please sat down

  Are you certain that the card reader has installed the XP drivers (and they are the exact brand and model of player)?  This is an internal or external card reader?  I suggest that you check with Toshiba to make sure you have all the drivers, firmware, or software required for the card reader (it may just be a pilot - it may need more).  I would also re - download the driver and uninstall the old and reinstall a new where the original has been corrupted for some reason any.  Are you sure that even with the drivers, that this computer model can handle XP completely and that you are not a problem of compatibility (I contact Toshiba Technical Support and confirm what you've done is perfectly possible, including the card reader).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HELP - modem may not be detected in 10 WinFax?

  I use a Modem internal Genuis: GM56PCI-, which has installed 10 WinFax works with previous ASUS PC - DL Deluxe motherboard. After replacing with motherboard ASUS P7H55-M/USB3, who does not work for WinFax 10 in all, is failed to connect to the mark, but when I test the modem in Device Manager, there is no problem and control modem is fine.
  Does anyone have suggestions on what is causing the problem?

  Thanks for all the suggestions

  I thank everyone for suggestions

  I try to unplug the modem and reconnect the modem, then it works now, I wonder if the connection is not well connected, why the test drive will be OK in Device Manager?

  Thanks for all the suggestions

• CD ROM drive not in Device Manager

  Suddenly, my CD-ROM drive doesn't work after I plugged a flash drive. It does not recognize a disc (tells me to insert a disc after that I already have). The drive is not listed in Device Manager. I followed the instructions of regedit and led nothing to delete the location. I tried the following without success website: http://support.microsoft.com/mats/hardware_device_problems/ The Fix - It ran and gave me: material changes may not be detected - checked. Y at - it sort of screwup driver or is my cd rom bread?

  Hello

  If the drive is viable that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and

  
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• Satellite P20 DVD ROM drive may not be recognized

  Hello

  I just replaced my DVD ROM drive, but I had a problem.
  It is a new DVD rom drive I ordered at TOSHIBA also.
  It could not be detected by Windows:
  -Tried to check on Device Manager, not detected
  -Tried to reload the driver, the same problem
  Note:
  Whenever I tried to re - insert the disc, the blue light in the control panel of my P20 beds (I understand, which means that the P20 detects the drive) but I don't understand, is that why Windows XP does not detect it or it does not alarm or error messages.

  Any help?

  Thank you

  Hello

  Try to use the Add Hardware option.
  This question is very strange, but I read on some sites, sometimes a whole new OS install CD player, brings back to life.

• Error: "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  Original title: my sound card is missing or disabled?

  My sound worked very well with some speakers the other day, when suddenly it stopped working. The sounds again, but with sounds such as those where an error message is displayed is not default reading/game audio is not.

  I recently got this computer work again once I've been using another computer for awhile, so I was messing around with some parameters that could be the cause of this.

  One of my games says my sound card's 'missing or disabled', & iTunes says "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  Thanks, Toby

  Re-install the drivers audio from the website of the manufacturer of the PC/laptop.

  See you soon,.

  Jerry

• Problem status Microsoft 6to4 has a driver problem detected other Solutions to adapt Hardware Exchange may not detected

  Map Microsoft 6to4 has a driver problem	Detected		Other Solutions
  Hardware changes may not have been detected

  Hi M. - Tottimeemoo.

  According to the description of the problem, it seems that you are having problems with "Microsoft 6to4 adapt has a driver problems. I will defintiely help you with this question.

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you to see link below and check if it helps.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520
   
  Method 2: I also suggest you to uninstall and reinstall the network card and check if that helps.
  http://TechNet.Microsoft.com/en-us/library/cc753699 (v = WS.10) .aspx
   

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• my dvd rom is not detected

  What can I do series Gateway PC laptop nv

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• No Audio / noise coming from my speakers, get the message: "material changes may not have been detected." When I click the speaker icon to troubleshoot

  Recently, my son plugged his headphones Turtle Beach X 12 in the front USB and my computer's audio input. Since he took the helmet, I have had no audio of my Logitech speakers.  When I click the speaker icon to get out of trouble, I get this message: "material changes may not have been detected." When I go to my control panel to manage my audio devices, I get a message that says no audio device is installed. I tried the simple things like the removal and reinstallation of my speakers and tries a recovery to date before my son his headphones plugged the computer, but those who have not yet worked. I have to uninstall and reinstall my sound card?

  Hello

  Which could be necessary, but first, first try the software road. Try the steps in this tutorial and see if that solves the problem: http://windows.microsoft.com/en-IN/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• Freezes in Windows 8, "material changes may not have been detected.

  A few days ago my laptop speakers have not worked or stopped working suddenly, although it reinstall the drivers. Last night, I installed a group of updates (not counting the 8.1) to my computer and that seemed to solve the problem of speaker but ever since then it has been freezing. First regardless of the application I have open (google chrome, my antivirus software, whatever it is) suddenly doesn't respond. Then, the entire computer freezes - the clock to stop, I can't click on anything whether or get into the Task Manager but the mouse still moves. This stage lasts 30 minutes and arrives at least once every two hours - usually, I pressed the power button to turn off, but last night I just closed the lid and went to sleep. This morning, I ran the hardware and devices Troubleshooter and received the message that "material changes may not have been detected. I don't know what to do.

  Hello, Léa,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause.

  The error message you get may be due to a service that is not running or if the race is not defined as automatic.

  You can try the steps below to check the status of service.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Look for Windows Installer service.
  3. Check if it is started, if not, right click on the service and click Start.
  4. Right-click on the Windows Installer service and select Properties.
  5. In startup type, select Automatic.
  6. Then click on apply and OK.

  If the problem persists, you can follow the steps in the Microsoft article provided below and check if that helps.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• HL-Dt-St DVD RAM GSA - 4167 ATA Device driver problems.__Mitsumi - CR-48X5TE ATA drive has driver problems. Hardware changes may not have been detected

  I changed Windows XP to Windows 7 Home Version 3SP.  Both my DVD-Rom are not recognized by Windows.  A check in the Device Manager reports that both drivers are up-to-date.  I ran each anvenue in windows and the manufacturer's Web pages.  Now, I hope you can help?

  What can I do?

  Hi stoertebecker,.

  Thanks for the reply.

  Glad to know that the problem has been resolved. If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CDDVD rom will not read the dvd rom or DVD

  my cd/dvdwrighter reads only cd rom not my dvd rom or DVD

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.