Help mount an Ordnance Survey Map - quality reduced in page view

Similar Questions

• Map Quest - the proxy settings view

  Hello

  Go on the map for our boxes VRTX view, you receive an error "Attention - no access to the internet" and on the same page by clicking Actions - Settings I see that MapQuest uses the proxy settings defined in the preferences - settings on the Console.

  Could someone please point me in the right direction because I am unable to find any preferences in the menu structure. Under Settings - General settings I specified the proxy and the test is successful.

  V11 browser is able to access the internet as well and the search for auto warranty works fine as well.

  No idea how to get MapQuest to work? OME v2.1.0.2635

  Thank you

  Hello

  MapQuest uses the Proxy settings under Settings - General settings.

  MapQuest made it mandatory to use the API key while using their API for this reason. Since there is no provision to enter the key API of MAPQuest, warning message in 2.1 OME. This problem is fixed in the next version of 2.2 OME. However, even with the message warning, everything should work with the exception of the search operation.

  You can use BingAPI for MapView OME 2.1 by setting the key to Bing in action | Settings in the map display page.

• Embed a map on the Web page?

  I would like to embed a map on a Web page client with a pointer to their location.

  What is the best way to do it.

  I can't record with Google because it is not my account and they did not.

  I also read that it isn't more visible to them all.

  Please can someone tell me how I could go about this.

  I made a map of my own, but it is amateur compared to others on the web.

  Terry

  You don't need to register with Google to get a map on the site...

  1. go to www.google.com/maps

  2. Enter the full address in the address bar and press enter/return

  3. on the bottom right, click on the gear icon

  4. choose sharing or integrate map

  5. click on the map tab to incorporate into the box that opens, this will give you a code iFrame containing the map

  6. you can change the size of the iFrame to small, medium, large, or custom

  7. copy and paste the code on the Web site

  From there, when a viewer looks at the page, they see the map location. If they want directions, click on "Get Directions" will open a new browser window and allow them to add their address and get directions to the location of the company.

  In my view, that if a customer is not willing to create a gmail account, they will not be willing to do anything to keep their site up-to-date and worth. Certainly, I wouldn't waste my time to create a personalized card or interface for it, I'm sure they don't pay you enough to do anyway. Online viewers are accustomed to see embedded in the sites Google map and understand how to work, even if the pop-up window is far from ideal.

  The card will be visible by anyone, where did you read this tidbit?

• MS Paint for Windows 7 resize issue with picture quality reduced

  I tried to insert a picture into another picture, like Photoshoping, using paint with limited success.  When I resize the first image to be much smaller, so that I can insert it into the other, this first image quality degrades so I can't use it.  I did not understand that if I was doing the bigger picture and the quality would be lower, but why when smaller?  I read some articles saying the re-sizing degrades the quality regardless of the bigger or smaller.  Is there a way to fix it or work around it?

  I tried to insert a picture into another picture, like Photoshoping, using paint with limited success.  When I resize the first image to be much smaller, so that I can insert it into the other, this first image quality degrades so I can't use it.  I did not understand that if I was doing the bigger picture and the quality would be lower, but why when smaller?  I read some articles saying the re-sizing degrades the quality regardless of the bigger or smaller.  Is there a way to fix it or work around it?

  ============================
  Something to try...

  Instead of resizing the overlay before adding
  in the background photo... try adding full
  size and then resize it by dragging the
  corner handles to reduce the size.

  It would be preferable that the two photos were both
  the same resolution. IOW... If you add a 640 x 480
  overlay a background of 2592 x 1944... the difference
  in its resolution would be visible.

  I was wondering if the task is to add a cutting
  (paperdoll) to the main photo? As in... addition of
  a missing family member for the family portrait?

• Help with BC and Google maps integration

  Hi, I'm ready to go for paid British Colombia option so that I can have access to the web applications.  But before I go ahead, I have a few questions for someone who may be able to help.

  I build the site Muse adobe - this is not the last version of muse that I'm working on a windows computer 7.  All web applications in BC would work on the site for all is not the latest version?

  Also, what I'm really interested is to make an interactive map, pins etc. of construction at the back - is it tutorials that someone can point me to possibly help with a style to tell the little box pop up?  I looked at the muse HELP + BC and BC duo Dynamics Webinar on aidbc already, but I was wondering if there is more tutorials that would help.

  Also, is it possible to use a stylized map, or do you go with the default google map?  If you use a stylized map, how add you that to the web application of BC.

  Sorry for so many questions, but must know before you make the jump to a paid option of BC.

  Thanks so much for all those who can help you

  Michele

  HI Michelle,

  Muse can not and does not use or have access to all that's BC. It does not have access to things like e-commerce and Web applications in the sense of full capacity and put on the page. You can create interactive maps with the google API, web apps as a source of data, using the ability of location address lat and long or geo etc, but this isn't something you can do really Muse on its own.

• Need help with 3d, design framework mapping appears transparent

  Here is the picture that I work with http://25.media.Tumblr.com/92fba886d84a9438c9520726b24a8fb3/tumblr_mm5oljeLJ31r848lxo1_128 0 png

  The words coca cola are red in my design and whenever I add it to the 3d mapping red it is no longer red but transparent. The race is gray on the bottle.

  Can someone help me? Should what settings I look for?

  That could occur naturally. You could try and rasterize object scribbled, then apply the image raster as a card.

• Need help to create a site map in Dreamweaver cs5

  Hi all

  I'm looking to find a way to put together a plan of my site ( http://www.gmanwebdesign.com ) and other is there a feature in dreamweaver cs5 help or can anyone recommend a.

  as you know I'm still in the early stages of the Web design / dev and all your help and advice is greatly appreciated.

  gman

  Hey Gman,

  in this thread http://forums.adobe.com/thread/582456 mhollis55 said that the creation of a site map is removed from CS4. In my CS5 I couldn't find these functions nor, I found this feature in my old CS3 (!) however. Here are some links where you can create a site map:

  http://www.sothink.com/product/treemenu/index.htm, there is a trial version too, or

  http://www.XML-Sitemaps.com/

  Hans G.

• The sight of my computer has been partially reduced to a minimum and can not get the view full screen. All around the page view is black. Help!

  My view of the Office was "restored to the bottom" permnantly and it cannot be changed. What I discovered on the computer remains low and impossible to get an overview

  Hello Noidea,

  1. When you say restored down, do you mean to say that it is minimized in the taskbar?

  2. did you of recent changes on the system?

  Method 1:

  You can try to change the resolution of the screen and check if it helps.

  Change the screen resolution

  Method 2:

  If it is a recent issue and then try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  How to restore Windows XP to a previous state

• help mount ligthroom

  I bought lightroom 6 a year ago, and I uninstall it from my computer cause broke right, so I try to re install again and I can't I don't know how install again I have my account of Pentecost my key help please.

  Serialize Lightroom trial to activate like Lightroom 6 CC

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• Help! -photoshop giving bad image quality

  Hello

  I need help please.

  I recently started taking pictures in RAW. Post processing is in camera raw, and then the images are saved in jpeg format.

  My difficulty is this: the images seem fine in camera raw or so open as a jpeg in a windows like photo viewer application, however if reopened in Photoshop they look terrible and are very grainy.

  I have the consistency of the parameters of the camera to monitor and Photoshop they are all set to Adobe RGB 1998.

  Thank you very much.

  Hi ianw

  Please save your settings as presets, Actions, work spaces (custom) .

  Then reset the preferences. See How to remove/reset the Photoshop preferences

  Concerning

  Assani

• Help mount captivate program executioner

  Does anyone know how to disable or change the sounds of the hangman program? I would use it for my students to learn vocabulary words, but comments that are cartoon characters are inappropriate.  I would like to transform or alter sound before I publish, but I could not find a way to do it. I need help with step by step instructions.

  Also, does anyone know how to change the font on the letters in the executioner? They are too fancy for young learners and cursive.

  Thank you

  If you have no other audio on the slide with the interaction of the Hangman, you could try to just cut this particular slide audio: "Enter On--> assign cpCmndMute with 1.

  You must make sure that the slide in the project (and the previous slide, if you allow moving backward) resets the variable to reactivate the audio: "Enter On--> assign cpCmndMute with 0.

• Newby needs help with an illusion of mapping

  Attached a photo of an illusion that I would like to be able to reproduce with different forms. I tried to use several different programs, including the Photo shop and some CAD programs. The problem is when I create the illusion, the lines around the edge are not aligned with the illusion (see illusion 2 than the way in which they should be).

  Any help would be most appreciated.

  Thank you

  Larry

  Hello Larry,.

  Here's what I do:

  

  You can add more places and everything will be all right.

  

  And also you can play with several forms:

  

  I hope this helps!

• Envy Touchsmart laptop 15: help establish them fix the map system, portable Touchsmart 15-J040US

  S/N: (deleted content)

  Model: 15-J040US

  Model: E0K02UA #ABA

  CCDI: 0887100000305b 00000320100

  Rev: 1960-100

  I removed the card system and there is not compatible with the numbers found in the Service Guide identification and Maintenance.  I think it's #720568-501

  Given the above number can we determine the number of good advice?  There is a sticker on the card that has a number that can be useful:

  CT: PDNTE00WD4W0LL A450368F19F8 Rev: 4.20 OY37BC060XL

  Hello:

  According to the parts list for your laptop on the link below, the motherboard is: 720568-501

  http://PartSurfer.HP.com/search.aspx?SearchText=E0K02UA

  This would make sense if your laptop is Intel HD integrated graphics card and came with the non-Pro of the W8 version.

• Help mount Kingston SSD in DV7T-7200

  I just bought a Kingston Hyper X SSD for my DV7T-7200.  I was able to clone my hard drive and was able to install the drive in the laptop and plug as post2.  The Bios sees the drive, but there is no option in the Bios to select it as my boot drive.  Windows does not see the drive.

  What can I do to make it work?

  Hello

  This case, check all cables, connectors. The following video shows a similar machine:

  http://www.YouTube.com/watch?v=cLP8kjeLW-Q

  Kind regards.

• help strengthen the existing script maps

  So I tried initially comes to loop through all the files but could not understand so I made sure that I could pass the file as a parameter, but ideally, I want it to all virtual machines without having to enter all the settings. Any ideas on the best way to do this? I want to the csv files for each folder with all the attributes that are customized for each virtual machine contained in.

  ##Variables

  Param ($param1)

  $report = @)

  $folders = get-file $Param1 # | name sort

  ############################################################################################

  ###########################

  ForEach ($folder in $folders)

  {

  $vms = get-vm-location $folder

  ForEach ($vm to $vms)

  {

  $ReportObj = "" | Select "File", "Virtual Machine", "POC", "Username", "Password",

  $ReportObj. "" Folder "= $folder.name

  $ReportObj. "' Virtual Machine ' = $vm.name

  $ReportObj. "' POC ' = $vm. CustomFields

  $ReportObj. "' Username ' = $vm. CustomFields

  $ReportObj. "' Password ' = $vm. CustomFields

  $Report += $ReportObj

  $csvfile = "D:\". "$folder".csv ".

  $report | Export-CSV $csvfile - NoTypeInformation

  }

  }

  The Get-FolderPath filter returns anything you put in the $row.

  Then if you add additional properties, they will be in the CSV files.

  For example, the following version adds the Notes property and all of the custom attributes

  filter Get-FolderPath {
       $vmImpl = $_
       $_ | Get-View | % {
            $row = "" | select Name, Path, Notes
            $row.Name = $_.Name
  
            $current = Get-View $_.Parent
            $path = ""
            do {
                 $parent = $current
                 if($parent.Name -ne "vm"){$path = $parent.Name + "\" + $path}
                 $current = Get-View $current.Parent
            } while ($current.Parent -ne $null)
            $row.Path = $path
            $row.Notes = $vmImpl.Description
            $vmImpl.CustomFields.GetEnumerator() | %{
                 $row | Add-Member -Name $_.Key -Value $_.Value -MemberType NoteProperty
            }
            $row
       }
  }
  
  Get-VM | Get-FolderPath | Group-Object -Property Path | %{$_.Group | Export-Csv ("C:\" + ($_.Name.TrimEnd("\")).Replace("\","-") + ".csv")}
  

  This version also solves the problem with the file name of the CSV files which was leaking.