Help move my datastore on external USB drive to reformat with correct block size

Similar Questions

• Loading file to the Virtual Machine by using an external USB drive... Please help

  We have an environment that we would like to import and create a virtual machine. The files are on the external 1 TB external hard drive USB puppy with NTFS. The files are approximately 430 GB. I tried almost all the options to get the files to the HOST that is running the server ESXI 4.0.

  Whenever we tried to get the files using the USB drive and Vsphere client connected to a local computer running windows on the ESXI 4.0 Server somehow transfer stops after a while. Some time around after ro possibly around 250 GB 200 GB. So far, we are not able to get the hard master file that occupies about 430 GB in the ESXI data store.  We also tried the third "Fastscp" software to transfer files to the ESXI host, but we had the same problem that the transfer stops at some point.

  Another option that we tired was to start a machine with Linux live CD and USB directly attached to this machine. As the Linux version was newer USB NTFS partition hard drive has been detected without installing any NTFS disks. We have mounted the drive USB on this machine and exported the mount point. In the ESXI server using CLI not supported (Alt - F1) we were able to ride the point of editing exported and tried to copy the files to the folder main datastore but same problem the transfer stops after a few hours sometimes even near 300 GB.

  Y at - it somehow I can bypass the file transfer by using not not the network, which means that if we reach directly the USB key to the ESXI server machine does not recognize it (using Alt - F1 not CLI) because it is partitioned into NTFS. I read that ESXI only supports FAT partition.

  We also tried to start the machine running ESXI server with the latest versions of Linux, in this case, we were able to mount the USB drive directly, but because ESXI stores files with VMFS partition we couldn't mount this partition in linux.

  Could you please recommend any solution to get the files the server ESXI 4.0?  Is there a way to allow us to start the EXSI with Linux server and can mount the partition VMFS use third-party drivers? OR what you would do. Advice would be nice.

  Welcome to the forums - using the vSphere client should work - block of what size did you use to create your VMFS data store? If you left it at the default of 1 MB, then the bigger file, you can copy that VMFS datastore is 256 GB - you'll need to create the data store with a block size of 2 MB which will allow you to create a file upto 4 MB or 512 GB keast and a size of 1024 GB.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• How can I migrate a time machine backup external USB drive to time capsule

  Searched the forums and can't seem to find an answer. With the help of El Capitan 10.11.6. You want to transfer backups Time Machine 4 years on an external USB drive on my new Time Capsule. Any ideas would be MUCH appreciated.

  There is no official method because it has problems.

  There's no official way.

  Here see Q18. http://pondini.org/TM/FAQ.html

  We recommend that people not me there. It has not proven reliable long-term. Start a new backup on the TC and keep the USB stick in the form of archive. After a few months or a year you won't have it.

  You have to understand the Time Machine backup otherwise locally the CF network. It is easy enough to move the backup network local but much harder the other way around.

• When you connect 1 or several external USB drives, why is the letter a * shoot?

  When you connect 1 or several external USB drives, why is the letter a * shoot? Referencing external drives through library (Windows V7) becomes a really shiny, totally useless feature without consistency of drive letter. Or unnecessary to be a design goal? I almost had it still works but who finally to 3 minutes). What it will take to make useful new features?

  Windows assigns the first available on the first hard drive connected and one drive letter to another and so on.  Always has, always will. What will help sometimes (but), is to open disk from an elevated command prompt management and adversely affect permanent a letter from your external drive which is much higher than the letters in use.  This will often allow the will to keep a letter.

• Access DENIED to VIEW, COPY or MOVE photos on an external hard drive

  Access DENIED to VIEW, COPY or MOVE photos on an external hard drive
  
  Im having problems accessing copy, editing and viewing my photos on my external hard drive, it says I do not have the appropriate permissions to access to the file .and the file belongs to an unknown user account, I am using an administrator account, how can I have access to these files?

  THE problem started since I have been using windows 7, now I am using windows 8, the problem is still there!

  Please help me, its been two years im trying to solve this problem.

  Here is the link to additional photos showing all the problems

  https://www.Facebook.com/media/set/?set=a.3381541016883.2168211.1220177281&type=1&l=160799ee13

  IM using HP530, 2g of RAM, windows 8

  the external hard drive is a samsung HD103SI, 1 TB model

  You must enter the property of your records - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• Disable AutoPlay on an external USB drive

  I installed a new external firewire hard drive which I store & access my photo files. When the computer between Saver screen, then re - starts later, AutoPlay starts & open Adobe Lightroom.

  I was able to stop Lightroom to open, but Autoplay initiates always when the computer wakes up after the screen saver turns on.

  I want to disable THIS SPECIFIC PLAYER ONLY to launch the Autorun. Can you help me?

  Hi jimmyg50,

  I suggest you follow the procedure in order to disable autorun on an external USB drive below.
  
   
  1. open AutoPlay by clicking the Start button, then Control Panel. In the search box, type autoplay, and then click AutoPlay.
   
  2. If you want to never see the AutoPlay dialog box, click on take no action next to the device or disc. To choose an action each time you plug in a device or insert a disc, click on ask me every time.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I need to be able to access the external USB drive

  I have an external USB drive connected to the physical host ESXi 5.0 and I need to access through a VM on the host, please help on this.

  Hi, here is how to set up the pass through usb, please see the following article KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1022290

• How can I make an external USB drive read-only?

  I'm trying to find a solution to take a USB HD in a spacing classified environment / air.  If I can make the drive read-only (like I gave him that I need to copy on these machines), then the Agency will probably approve the device.  I can't use DVDs that data are 30 + GB in size.

  Hey there, capsfanva!

  Welcome to the communities of Apple Support! It seems you need to set permissions on an external USB drive or hard drive. These permissions setting is a great way to improve the security and privacy of these elements. You've come to the right place and you will find the answer below. You must connect the device to your computer and follow these steps:

  Set permissions for the items on your Mac OS X El Capitan:

  See you soon!

• Satellite A300-19 q - how to start with an external USB drive

  Hi all!

  I have a (old) TOSHIBA Satellite A300-19 q bought in 2008. I wanted to do a clean install of Windows 7 by reformatting my HD. The problem is that my internal DVD drive no longer works. So I tried to boot from the Windows 7 DVD installation with an external USB drive.
  Unfortunately, I couldn't find a way to boot from USB devices in my BIOS options.
  My BIOS is up to date (version 4.20) from Toshiba Web site.

  So I was wondering, does anyone know if the A300-19 q can boot from USB devices?

  Thank you in advance.

  I have A300 at home but I never tried to start with an external USB device.
  Start your laptop and press F12 to get into the boot menu. There must be USB option. What happen when you try to use it?

• Cannot use disk utility to create the partition of the free space on the external USB drive.

  I have a red 3 TB Western Digital drive in a USB hard drive docking station.

  The reader is GPT, and I have two volumes on it (a single volume is "Microsoft reserved", another volume is NTFS).

  The other part of my drive is 1.5 TB of free space. I want to create a new partition with free space so that I can put backups Time Machine encrypted external hard disk.

  I checked free space on the drive with my Windows machine:

  
  DISKPART> list disk
  
  Disk ### Status Size Free Dyn Gpt
  
  -------- ------------- ------- ------- --- --- 
  
  Disk 0 Online 167 GB 20 GB
  
  Disk 1 Online 465 GB 0 B *
  
  Disk 2 Online 2794 GB 1526 GB *
  
  DISKPART> select disk 2
  
  Disk 2 is now the selected disk.
  
  DISKPART> list part
  
  Partition ### Type Size Offset
  
  ------------- ---------------- ------- -------
  
  Partition 1 Reserved 128 MB 17 KB
  
  Partition 2 Primary 1267 GB 129 MB 
  
  DISKPART>
  

  DiskPart displays 2 partitions - a 128 MB and the other GB 1267 with 1526 MB of free space.

  I took the hard drive of my MacBook Pro running OS X El Capitan 10.11.3 and pulled towards the high disk utility, but for some reason, that it does not resemble the disk utility it is to see the free space, so I can't create a new volume.

  Here are a few screenshots:

  ... of the physical disk in disk utility (notice how it doesn't seem be all unallocated space on the disk to create a new volume):

  

  ... of the NTFS volume in disk utility:

  

  ... of information for the drive in disk utility:

  

  ... of information for the NTFS volume in disk utility:

  

  ... of the partitioning settings page. Notice how the sign is grayed out (I can't create another partition):

  

  

  I'm a new Mac user. My company recently gave me a Mac, so the first thing I want to do is to create a new partition on this external USB drive to put backups Time Machine figures on it.

  In the research I did find a way to do it on a mac computer without erasing the drive and starting over. But you can go to your windows computer and partition the free space of disks. Then use the mac to set the free space as mac os extended journaled. Here's what I found. http://www.PCWorld.com/article/2066191/how-to-partition-a-hard-drive.html the only other way would be to copy the file on the external drive, somewhere, so you can delete it and re partition for windows and mac. Then reinstall windows files. I'm not familiar with windows systems.

• external USB drive not seen

  Hello

  I just bought a Readynas RN212 as a replacement for my Duo (v1). But the external USB drive (Toshiba 2.5 inch, ext3), that I used as backup for my Duo and always worked perfectly, is not recognized in the RN212.

  I have ssh - ed at the RN212 and did a manual mount: mount-t ext3/dev/sdb1/mnt which worked. The player ends up in/run/udev/data.

  Any idea what's going on?

  Kind regards

  Eric

  Hello espakman,

  This USB has data on the volume of your old Duo? If it is possible to format, use the NTFS system.

  If it contains all the data, it's that it may be preferable that you contact support for the RN212 so it can be verified from the backend.

  Kind regards

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• Cannot drag and drop external USB drives

  Hello

  All of a sudden, I can't drag-and - drop or copy and paste all the files on an external USB drive. Windows Explorer stops and restarts each time. A ran the antivirus, malware, CC Cleaner etc and its still the same. Also tried in safe mode.

  The event log is as follows:

  The failing application name: explorer.exe, version: 6.1.7601.23418, time stamp: 0x570898dc
  The failed module name: psdprotect.dll, version: 3.1.76.0, time stamp: 0x4aa9003b
  Exception code: 0xc0000005
  Offset: 0x00000000000012de
  ID of the process failed: 0 x 1450
  Start time of application vulnerabilities: 0x01d1cb1bc9f4ea6a
  The failing application path: C:\Windows\explorer.exe
  Path of the failing module: C:\Program Files (x 86) \EgisTec\MyWinLocker 3\x64\psdprotect.dll
  Report ID: bea55c9d-3711-11e6-981a-00262d7bb69c

  Is this average Winlocker is the cause? Winlocker on my PC for years without any problem.

  Thank you

  Hi, I managed to solve the problem by uninstalling winlocker. I had open Séverine deep and burn the files on DVD first, but I seem to have lost the 30 GB partition that he once used it uninstalled.

  Yes, I came to the same conclusion - uninstall mywinlocker (a dll shared with windows Explorer which has become corrupted). The dll is: psdprotect.dll, version: 3.1.76.0

  Here's what I think happened in my case:

  Microsoft automatically installed Windows 10 on my system. I wouldn't use it and returned to my old operating system (Windows 7).
  During the re installation, Microsoft provided updates for some files (cela "should include" to explore shared dll) HOWEVER, mywinlocker (part of an independent program that was originally installed on my system in 2011 - the old dll remained in place).

  Since Explorer windows update needed now the newer dll - this is why I think that the program was not.

  To know if you have this problem - check your event logs to see what error

  Start / eventviewer / windows logs / request - find the brand red exclamation (view)
  That's what my error looked like:

  The failing application name: Explorer.EXE, version: 6.1.7601.23418, time stamp: 0x570898dc

  The failed module name: psdprotect.dll, version: 3.1.76.0, time stamp: 0x4aa9003b

  Exception code: 0xc0000005

  Offset: 0x00000000000012db

  ID of the process failed: 0xeb4

  Start time of application vulnerabilities: 0x01d1cbf05e82786e

  The failing application path: C:\Windows\Explorer.EXE

  Path of the failing module: C:\Program Files (x 86) \EgisTec\MyWinLocker 3\x64\psdprotect.dll

  Report ID: 189edf94-37e4-11e6-a2db-90fba64d1d10

  I do not use Mywinlocker, so I simply uninstalled the program. But if you use - you'll want to put the information before you uninstall.

  Once uninstalled - explore should work again. If this isn't the case, you may have remaining broken DLL. To run a system cleaner to solve these issues.

  Thank you Moderec for pointing me in the right direction. Like you, I surfed the web to find answers and none of them took into account Mywinlocker. It took some time to solve this - was grateful to finally get fixed! Bravo!

• Disable the external USB drive autoplay function? Windows 7 Pro.

  I have two external USB drives connected to my computer. Whenever I start, an AutoPlay window will appear for each reader, asking me what I want to do with it. It gives 2 choices "Open folder to view files", or "View more AutoPlay options in the Panel". If I choose to view more AutoPlay options, my USB keys do not appear at the bottom of the AutoPlay under devices. I want to continue to use AutoPlay for my CD/DVD players, but I want to stop AutoPlay Windows popping up whenever I start the computer. It's frustrating to have to click the X on both of these windows, whenever I start the computer.

  Any suggestions?

  I have two external USB drives connected to my computer. Whenever I boot, an AutoPlay window will appear for each reader, asking me what I want to do , but I want to stop AutoPlay Windows popping up whenever I start the computer. It's frustrating to have to click the X on both of these windows, whenever I start the computer.

  Any suggestions?

  Click on the round to START and in the search box type "regedit" (without the quotes).  .
  Click once on the COMPUTER (upper-left) and then click the EDIT menu and click FIND.

  Type "NoDriveTypeAutoRun" and .
  In the left pane, right click EXPLORE and click EXPORT.
  Type "autorun" in the FILE NAME box, choose a folder of your choice and press the "SAVE" button.
   
  Back in the editor of the register, in the right pane, right-click on the NoDriveTypeAutoRun entry and click EDIT.
  Change the number 91 to 95.   Press OK.

  Reset.  If no joy, double-click the file that you saved, to merge into the registry.

• Is there a driver for external hard drive WDME1600 compatible with windows vista?

  Original title: My Passport Essential WDME 1600

  Is there a driver for external hard drive WDME1600 compatible with windows vista?

  Hello

  Please see this link.
  http://www.microsoft.com/Windows/compatibility/windows-vista/Details.aspx?type=Hardware&p=My%20Passport%20Essential%20WDME1600&v=Western%20Digital&uid=WDME1600&pf=4&pi=7&c=Storage%20Devices&sc=Hard%20Drives%2C%20External&os=64-bit

  It says here that if you have a 32-bit Vista system, then a free download is necessary for her. Click on the link to the breast and download the necessary files. I hope this will get this drive works for you.

  I hope this helps.