Help: Multiple SRST

Similar Questions

• Need help multiple BSOD

  Hey all,.

  I have several BSOD errors.  I reinstalled win 7 after having a BSOD error different loading windows.  I did the format of the hard drive, so it must be cool.

  I have updated all the drivers, including the BIOS.  Any help is appreciated because I'm banging my head on the wall here :)

  OneDrive .dmp and error logs

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Wednesday, September 17, 2014 21:03:57 this computer crashed
  crash dump file: C:\Windows\Minidump\091714-35646-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA0000, 0xFFFFF80002CBA22B, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 21:03:57 this computer crashed
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA0000, 0xFFFFF80002CBA22B, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 7:58:58 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\091714-38984-02.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Verification of error code: 0 x 18 (0xFFFFFA800A2BA2B0, 0 x 0, 4 x 0, 0xFFFFFFFFFFFFFFFF)
  Error: REFERENCE_BY_POINTER
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that the reference of an object count is illegal for the current state of the object.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 17:26:14 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\091714-58141-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA8000, 0xFFFFFA8008A24BB0, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 17:20:10 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\091714-39780-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA0000, 0xFFFFF80002C5622B, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 17:16:05 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\091714-38984-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA8000, 0xFFFFFA80081DCBB0, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, September 17, 2014 4:10:54 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\091714-36114-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Verification of error code: 0 x 50 (0x0, 0xFFFFF80002D1236E, 0xFFFFF8A003BCB000, 0x0)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  10:35:38 AM GMT on Wednesday, September 17, 2014 crashed your computer
  crash dump file: C:\Windows\Minidump\091714-42837-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA8000, 0xFFFFFA80080FDBB0, 0x0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Not a problem, thanks.

  KMODE_EXCEPTION_NOT_HANDLED (1e)

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Bugcheck 1E, {ffffffffc0000005, fffff80002cba22b, 0, fffa0000}

  0: kd > fffff80002cba22b ln
  (fffff800'02cba1ec)   nt! RtlImageNtHeaderEx + 0x3f |  (fffff800'02 ca 9108) nt! MiDoReplacement

  The exception is produced in nt! RtlImageNtHeaderEx + 0x3f.

  ---------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it is most likely cause conflicts:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 navigate to services.msc and disable the nVidia Streaming Service card and then restart the computer.

  Kind regards

  Patrick

• HELP: multiple users with creative cloud libraries?

  Hello. My teenage son has creative suite on our family computer. I have a different account creative cloud does it and you want to use my library (saved in my creative cloud) when you use the family computer. Is it possible for libraries of the different members of the family be available for use in programs of more creative or is it limited to the library of my son?

  (Seems to work on our laptop, but the difficulty to reproduce that on the new iMac).

  Thank you!

  Hi Ingerlenef52356538,

  You can check how to collaborate on files and libraries of creative cloud account using this link and the creative cloud libraries are limited to applications Adobe CC only.

  We invite you to update this discussion in case you need more help.

  Thank you.

• Help multiple button links Dreamweaver simpleviewer galleries

  I'm doing it:

  http://www.airtightinteractive.com/SimpleViewer/examples/multiple_galleries/gallery1/index .html

  and here is another good example

  http://www.designhousestudios.co.UK/sampleportfoliogallery/sampleportfolio.html

  on my page here:

  http://Peachtree-designs.com/

  This seems to be the code concerning different slide shows (he is the example of how Web page I want it to be):

  -----------------------------------------------------

  < div id = "header" >

  < a href = "... / gallery1/index.html" > 1 < /a > Gallery | "» < a href = "... / gallery2/index.html" > Gallery 2 < /a > ".

  < / div >

  " < div id ="flashcontent"> SimpleViewer requires JavaScript and the Flash Player. < a href =" http://www.Macromedia.com/go/getflashplayer/ "> download Flash.» < /a > < / div >

  < script type = "text/javascript" >

  ------------------------------------------------

  The slideshow of 'Simple' Viewer gives instructions on how to integrate simply and I did it successfully, a link is here if you want to check:

  http://www.airtightinteractive.com/SimpleViewer/examples/embedded/

  I have this job very well, but would like to integrate several galleries. The instruction of "simple" Viewer page to create several galleries, what just you said

  " ... To create several SimpleViewer galleries, make a copy of the entire file SimpleViewer Gallery for each gallery. Create your individual galleries, as usual. You can now create a menu page that links to the page index.html in each subfolder. Here is an example that contains a menu to navigate between the 2 SimpleViewer galleries. »

  My confusion is what the heck is a menu page. I ignored this all together and I tried looking at the code of the pages that give examples. in particular, the page which shows a download of html.

  
  

  But I do not understand how to link the buttons in Dreamweaver to create different slideshows. I put the four files slide show (print, illustration, logo, design) in my main HTML page. I guess the solution is to put the above code in for each slideshow/Gallery... do refers to each gallery my folder names, but then somehow the DW buttons link to these files.

  I will continue to search this and see if I can understand, but any input, advice or help would be very appreciated. If you would like to speak in terms laymans terms I'd appreciate it, I know that flash well but I am new to dreamweaver and not very good at codeing so I managed.

  Thanks a lot in advance, sorry this is so long.

  Sharon

  What do you mean when you say: "the four files slide show (print, illustration, logo, design) I put it in my main HTML page. "? ".

  My intuition will in interpretting what you have presented, a menu page will be a page that contains links to the different pages of the Gallery, the pages that are in separate folders.  Your main html page could provide a home for this menu, as well as any other content you want to display on this page.  When you click on one of the menu buttons, you open the index page of the selected gallery folder.

• Important - need help - multiple xy graph

  Hi all

  I join this messege a vi. It solves a diffrential equation. I works well

  but I need to find the answer (o/p) (a) change of parameter and has the values (10 / 20-5-2 - 1 - 0.5 - 0.2) on the same graph, XY

  OK thank you all.

  thanls to smercurio_fc

  I solve the task

  I enclose the solution

• Help multiple value parameter, pl/sql

  Hi all
  
  I have a pl/sql as procedure:
  
  operating (pi_id varchar2);
  
  If I pass values for pi_id like 'a, b, c, d, a3, a100';
  
  In this procedure, I have something like:
  
  The code of the 1 'a' I need to make a treatment for this id
  For the 2nd id, 'b', I need to do the same treatment for different id
  .
  .
  . (so on)
  If 100th value('a100') then the same different treatment for id.
  
  How can I break the varchar 'a, b, c, d, a3, a100' in different id and the treatment for each id (just similar to the works of a cursor)?
  
  In detail:
  
  create or replace procedure test (pi_id varchar2) is
  
  Start
  
  Dbms_output.put_line (pi_id);
  
  end;
  
  This will display: a, b, c, d, a3-a100
  
  I want the output to be like (printed at the same time not the next line print):
  one
  b
  c
  d
  A3
  A100
  
  Thank you
  Verdier
  
  Published by: Verdier on February 5, 2011 18:51

  Watch http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:73830657104020 (no tables involved)

  Concerning

  Etbin

• (HELP) - multiple loading external images #1010 error

  I am a newbie in Flash and spent all day trying to solve this problem and can't solve this no matter what I do.

  I use Action Script 3.0, CS5 on Windows 7.

  I am trying to load two external images (thumbnails) in the magazine "See the picture below for reference", where will be the size of the full image. However, I get this error when testing my movie. What I am doing wrong?

  

  Film test error message:

  'port1_btn '.
  TypeError: Error #1010: a term is undefined and has no properties.
  to index_fla::MainTimeline/fl_MouseClickHandler_6().

  'port2_btn '.
  TypeError: Error #1010: a term is undefined and has no properties.
  to index_fla::MainTimeline/fl_MouseClickHandler_7().

  FOR INFO:

  Loader instance name: mainLoader

  Miniature #1 the instance name: port1_btn

  #2 miniature instance name: port2_btn

  This is my code

  

  
  

  Go to your publication of Flash settings and select the option to enable debugging.  Then, the error messages could include an indication of which lines are at the origin of the problem.

  And just for fun to ask because the code is a bit weak... is the mainLoader inside a container named portfolioBkgd?

• Having multiple computers using the server POPS via Thunderbird. A new computer has IMAP server and cannot send or receive emails via Thunderbird. Help

  With the help of Mozilla Thunderbird - multiple computers use the POP server, but a new computer uses the IMAP server. Mail or back does not work
  Can we change the IMAP POP server to make it easier. All my other computers POP and mail is perfect.
  What can I do?

  First question is your email provider does support IMAP protocol?
  If this isn't the case, that is why it does not work.
  If they do, IMAP is a protocol much better use to check email from multiple devices.
  There are a lot of good tutorials on the differences between POP and IMAP if you can do your own research on this.

  You don't change an account from one protocol to another.
  You delete the account and add back with the correct protocol.
  Thunderbird has a tendency to select IMAP as a default value. You need to stop right there and make the POP changes if that's what you want or need.

• I have real problems, set up multiple profiles on a windows pc 7... help please

  I set up multiple profiles on my other pc, op xp pro system, but I tried to do exactly the same thing on this pc with windows 7 and it works just...
  I get the new profile set up and I set up a Profile Manager shortcut on my desktop, but when I try to untangle the shortcut in the new profile, it tells me that it cannot find the target...
  When I open the new profile in the Profile Manager, he doesn't sit separate on the taskbar and is just another page of my default profile...
  Firefox exe is located in a speech very weird on the comp ' C:\Program Files (x 86) \Mozilla Firefox ".
  I'm pulling out my hair any help you can give would be really appreciated...

  Using multiple profiles - Firefox MozillaZine Knowledge Base-
  Use -no-remote on departure when using default Firefox and/or profile
  http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

  The profile names are case-sensitive, you must use - no.-remote or your default browser or not your default profile

  http://dmcritchie.MVPs.org/icons/win7_quicklaunch_large.PNG

  target:

  "C:\Program Files (x 86) \Mozilla" p - Firefox-three-no-remote

  Start:

  "C:\Program Files (x 86) \Mozilla Firefox".

• How can I get rid of a redirect virus. It is not DNS, I checked several times. I scanned my Mac with Malware bytes multiple times. He is yet to come. I am very confused. Help me!

  I'm on MacBook Pro (retina, 15 inch, mid-2015) how can I get rid of a redirect virus. I use Google Chrome. It is not DNS, I checked several times. I scanned my Mac with Malware bytes multiple times. He is yet to come. I am very confused. Help me!

  http://Syndication.ExoClick.com/splash.php?IDZone=1758202&type=8

  It's the kind of redirects that I get all the time

• Settlement data based on multiple selection ListBox reference need help

  Hello again,

  The question that I have is selecting from a listbox with multiple selection to fill the tables with the selected data. My code is as follows:

  Void loadData_EventClick (ByRef This)

  Dim j

  Dim k

  k = 0

  If ListBox.MultiSelection.Count = 0 Then Exit Sub

  For j = 1 To ListBox.Items.Count

  If ListBox.MultiSelection (j). Count = True Then

  k = k + 1

  End If

  Next

  TextBox.Text = k

  End Sub

  The code works perfectly up to the second if statement. My current channel group list contains 16 channels and with the second if statement guided the textbox output is equal to 16 (i.e. k = 16), which is what I expected. Im just using the k = k + 1 for the test. Eventually will be replaced by operating code specific to what I need to do.

  So the question that I have is to get the code to recognize what values are selected and referring to the index for the selections in a table. Im not sure on how to do it.

  Any help is very appreciated.

  Thank you

  ~ Nathan

  Attached JPEG shows the current user interface and the output of k with the second if statement commented

  Hey Nathan--

  ListBox.MultiSelection () is a function that returns an array of [multiple] selected items in ListBox.

  ListBox.MultiSelection.Count is a property that returns the number of items in the table above.

  Therefore, the logic in your second IF statement that says if ListBox.MultiSelection (j). Count = True really makes no sense because:

  1. The array returned by the multiple selection (using (j) indexing now refers to a single selected item in the list (which has not its own 'Count' property)
  
  
  2. If you don't the array index, assuming that you had selected 4 items in your list, your statement would still be actually as said if 4 = True which is not what you get.

  Make sense?

  Here is a modified version of your code that I hope makes it a little more obvious how these elements relate to one another.  Give it a run; of course, 75% of the code is extranneous to you working end to account, so make sure that you subsequently delete what you won't need.

  Sub loadData_EventClick (ByRef This) ' creates the event handler
  
    Dim j
  
    If ListBox.MultiSelection.Count = 0 Then Exit Sub
  
    TextBox.Text = "Total ListBox items:" & ListBox.Items.Count & + "" \n "".
  
    TextBox.Text = TextBox.Text & "Total selected items:" & ListBox.MultiSelection.Count & + "" \n "".
  
    TextBox.Text = TextBox.Text & "Selected Items:" & + "\n"
  
    For j = 1 to ListBox.MultiSelection.Count
  
      TextBox.Text is TextBox.Text & ListBox.MultiSelection (j). Text & ", index" & ListBox.MultiSelection (j). Index & + "\n"
  
    Next
  
  End Sub

  You are making great progress; It will get quickly easily faster and we are here to help – do not hesitate.

• How to scan multiple pages to a pdf file using the PIXMA MG7520 on Windows 8.0? Help, please!

  I recently got a PIXMA MG7520 for a gift.  It works very well with my laptop / Tablet lenovo under Windos 8.0.  The only downside for the HP all-in-one it replaced is that she doesn't have an ADF.  That being said, there must be a way to scan multiple pages into a pdf file.  I need help to understand the thing.  Thanks in advance!

  Hi mdtolbert54,

  There is a program that comes with the printer called the IJ Scan Utility that can help you with scanning multiple pages in a single PDF document.  To do this, please follow these steps:

  1. on your keyboard, press the Windows key.

  2 start typing IJ SCAN UTILITY. The search window opens while you type. Once the UTILITY SCAN IJ is displayed, select and open it.

  3. in the Scan from Canon IJ utility window that opens, click SETTINGS... at the bottom right of the window. The settings dialog box is displayed.

  4. click on the SCAN of DOCUMENT option in the left pane of the window.

  5. in the SAVE the SETTINGS in the window section, you select the recording format and the location of the document you are about to analysis.

  (a.) in the FILE NAME field, specify the name you want to give the file. By default, the file name will begin with IMG; You can remove IMG and change it to anything you want to name the file.

  b.) b.) in the field of DATA FORMAT, use the arrow menu drop-down to select PDF (Multiple Pages).

  (c.) in the field RECORD in, please go to the area where you want the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.

  6. once all settings have been selected, click on the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen is displayed.

  7. click the DOCUMENT button. Housing starts scanning. Click CANCEL to cancel the scan if necessary. Scanned documents are saved in the location of the selected folder previously specified in the SETTINGS... window.

  If you find that you need to analysis advanced options such as setting resolution, brightness, contrast, saturation, balance colors, etc. in addition to the options selected above, please click the SCANGEAR button on the utility main screen Scan of IJ, then adjust the necessary elements.

  Once the above parameters are set for the scanning of documents, in the future, you need only launch the utility of digitization of IJ, then press the PAPER button for the analysis (unless you want to make changes to the settings).

  I hope this helps!

  It has not responded to your question or problem? Please call or write us using one of the methods on the page contact us for further assistance.

• Cannot move tabs if the TWO Helper tab Multiple Tab Mix more AND is active since Firefox 49 update.

  The tabs can not be rearranged. Operations tab dragging with the mouse, but the remaining space and the tabs do more mix to make room. Arrow placement does not appear. By releasing, the tab appears to the vacant place that it comes.

  Problem when Firefox updated to 49. Even on two different computers with Vista and Windows 7. If I disable tab Mix Plus, or Multiple Tab Handler, drag the tabs normally. (Both were working together before, for years).

  I does no change in settings on computers option. I have not installed the new modules. He might have 49.0.1 when it first 'broken' and is always the same with 49.0.2.

  I never had the shift + click and ctrl-click configured such as recommended; but I also tried and it did not help. (I put them for MTH to control, now, I have them set as recommended with TMP controlling selections).

  Has anyone else using these two extensions encountered this? Should I report it to the author (s)? Or somewhere else? This is my first post, in the corner right/better?

  Thank you very much, Mr KL

  There is a report of "Issues" opened here on this specific issue. https://github.com/piroor/multipletab/issues/139

  And TabMix Plus has a forum of support here: http://tabmixplus.org/forum/ peek into "Problems & Questions" did not show a thread on this problem. https://BitBucket.org/onemen/TabMixPlus/issues Nothing is.

  Make sure that the two extensions are the absolute latest versions of 'Libération'. Multiple Tab Handler 0.8.2016090602 Tab Mix Plus 0.5.0.1

• BBM HELP! BBM ver.10.13.6.9 trouble on save the image became multiple

  My blackberry Z10. After you download bbm version 10.13.6.9 I had when I was download the bbm group photo. And im save the picture in the file manager for this unit.
  The problem is when I download the first picture normally, but when I save second photo, that he became double/twin, and also on the third photo is multiple (see photo 3) and much more.
  Some body having problems like me, or just me?
  Please may someone help.

  Your last sentence, the problem, I understand. The preceding sentences on what you're doing, I can't follow.

  Here's what I'd do, step by step...

  1. in BBM, press twice on the image in the chat (this opens another screen with partial view of the image, with the comments below)

  2. tap the image again (this opens another screen with just the full image)

  3. tap on the bottom right icon and select Save as (this opens the screen to navigate to the location of the folder to save the file)

  4. save the file

  So, what do you do? If not, what do you do, step by step?

  For example, to display the file in the folder...

  1. open the file manager app files

  2. navigate to the folder containing the image

  3. Select the file to open

  Then, follow these steps. You see two files of the same image? Exacly same file name, or are the names of different files? You can post a screenshot?

• HELP the multiple ContactPicker in QML

  I have this code

  ActionItem
              {
                  title: "Invite Contacts"
                  ActionBar.placement: ActionBarPlacement.OnBar
                  imageSource: "asset:///images/titleAddFriend.png"
                  onTriggered:
                  {
                      contactPicker.open();
                  }
  
                  attachedObjects: ContactPicker
                  {
                      id: contactPicker
                      mode: ContactSelectionMode.Multiple
                      onContactsSelected:
                      {
                          for(var i = 0; i < selectedContactsIds.length; i++)
                          {
                              var phoneNumber = _app.getContactPhoneNumber(selectedContactsIds[i]);
                              console.log("PHONE: " + phoneNumber);
                          }
                      }
                  }
              }
  

  but does simply not multiple selector. It still operates as the single contact selector by default. I added a qml register type in main.cpp and libraries are also imported. any suggestions please? This problem is also present although 10.1 and OS 10.2.1 tried.

  I thought about it... its another case of QML it can not handle.  After testing your code, I noticed this error

  file:///apps/com.example.dynamicattach.testDev_namicattach58cf113_/native/assets//main.qml:51: ReferenceError: Can't find variable: ContactSelectionMode
  

  So I tried to import ContactSelectionMode qml as the selector is with no success.

  So, I stuck with c ++ for the switch and got the results of work

  The solution

  applicationUI.cpp

  #include 
  #include 
  

  void ApplicationUI::contacts()
  {
        ContactPicker *contactPicker = new ContactPicker();
        contactPicker->setMode(ContactSelectionMode::Multiple);
        contactPicker->setKindFilters(QSet()
             << bb::pim::contacts::AttributeKind::Phone);
  
        bool success = QObject::connect(contactPicker,
               SIGNAL(contactsSelected(QList)),
               this,
               SLOT(onContactsSelected(QList)));
  
        if (success) { // Signal was successfully connected.
              contactPicker->open();
            } else { // Failed to connect to signal.
              qDebug() << "Didn't connect the picker signal";
            }
  }
  
  void ApplicationUI::onContactsSelected(const QList &contactIds) {
  
      qDebug() << "contacts" << contactIds;
  }
  

  applicationUI.hpp

  public:
      ApplicationUI(bb::cascades::Application *app);
      virtual ~ApplicationUI() { }
  
      Q_INVOKABLE void contacts();
  
  public slots:
      void onContactsSelected(const QList &contactIds);
  

  . QML

  Button {
                  id: contact
                  text: "Pick Contact"
                  onClicked: {
                      cpp.contacts();
                  }
  
              }
  

  Now, given that the function is entirely in c ++, you should be able to take your code to

  _app.getContactPhoneNumber(selectedContactsIds[i]);
  

  and just insert into onContactsSelected to get your phone numbers

  I hope that helps!  Now I know how to do it too =)

  P. S.

  If you are still having a problem where something must certainly work and it is not, it is very likely that you will succeed if you just pass it to the c code ++ like theres probably a problem with the QML support.