Help.My HP8660 all-in-one does not work correctly.

Similar Questions

• my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why

  my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?

  You must download and install the appropriate drivers for your version of Win7 from this link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us

  I hope this helps.

• The scanner on my Lexmark X 2480 all-in-one does not work, is it a driver problem?

  Scanner on my all in one system will not work, all in a single system is a Lexmark X 2480 printer does not scan.

  Original title: driver problem

  Search for the latest drivers from the manufacturer's website.

  Support and downloads Lexmark
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480#1

  Is this the same driver problem also posted you on here ?

• Brother all-in-one does not work with the computer more

  After an automatic windows/XP download started what follows:

  All-in-one Brother takes control of the computer, but are not sent or computer will not receive the image to the desktop.

  Also, same unit will receive a fax and normally sends to the computer to the paperport, but now he sends (i.e. "connecting to PC" displayed on the LCD of the brother) to a computer but it can not be found anywhere; so lost.

  Measures taken so far:

  1. Uninstall and reinstall the Brother software, no help.

  2 brother support after an hour said that it is the computer not brother (I believe that good).

  3 System Restore will not work, it goes through the whole process, but said at the end that there nothing; Try again...

  4. in addition, conducted a deep scan for viruses etc, nothing found.

  Any ideas?

  You have posted to a group of Vista, but seem to be using winxp?

  What automatic download? Update history will show what has been updated

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  Message: Script error...

  OK if you use IE9 32-bit

  Latest version of the driver from HPupdate

  Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

  Hello borisgit,

  As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

  Script error when you try to print from Internet Explorer 9

• My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  Hello

  Make sure that Photoshop is closed.

  1 - go to this place C:\Users\user name\AppData\Roaming\Adobe\Adobe 2015\AutoRecover CC in Photoshop

  You will be able to see all the. PSD file that opens automatically when Photoshop is open, delete or move all the files in this folder.

  2 - restart Photoshop and go to edit > preferences > performance UN check the gpu processor use and restart Photoshop.

  It should be working fine now.

  Thank you

• Shortcuts mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1

  Shortcut of mouse to "Open the link in a new tab" help "Middle-click on the link" does not work on 10.0.1, it worked on version 9.0.1.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• spell check does not work correctly. It highlights each word

  my spell checker does not work correctly. When I send a message it highlightes, virtually every word and all are spelled corectly - help please

  You use Outlook Express when you see this? Office Word 2007 or 2010 is installed?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows media Center does not work correctly.

  * Original title: Windows Media Center

  Downloaded 10 hated windows he returned to windows 7

  Now, windows media Center does not work correctly. Very slow to do anything whatsoever at all, let alone play music

  Any suggestions please

  Try to uninstall, reboot, reinstall, restart WMC according to the http://www.howtogeek.com/howto/26107/how-to-reinstall-windows-media-player-in-windows-7-to-solve-problems/ article is for WMPlayer but just to check the entry of WMCentre instead.

  If that doesn't help, try a SFC/scannow and see if it detects and corrects something - https://support.microsoft.com/en-us/kb/929833

• I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly.

  I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly" program proposed to update the driver, but there is no provision in any of the dialog boxes.  Windows Help and support says: help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format. All this brought me here, please, how to fix this?

  The last thing you want to do is install and run any third tuneup/Optimizer program.

  In the worst cases of such utilities can cause system failure or program, uninstall it, having restored firstly of the changes he could do.

• Application does not work correctly when I press a CommanButton

  Hi all, I'm having a problem with weblogic 10.3.5.
  
  It turns out that an application created with JDeveloper 11.1.5, I have test and all is well in that the JDeveloper integrated Weblogic.
  
  But when to deploy on a stand-alone 10.3.5 weblogic server, the application does not work correctly when I press a CommanButton to go to another search page (the 'action' property is properly set), but nothing happens, remains in the same home page. Similarly when a link of commanButton to run a workflow, it does not work, however in the integrated JDeveloper to Weblogic it works correctly.
  
  How can I solve these problems?
  Thank you.

  One thing you shouldn't do is add '.jspx' to your URL. This shows the page, but does not start the life cycle of faces that show not work button not working navigation.
  Use

   http://:7001/myApp/faces/index
  

  And it should work.

  Timo

• My phone does not work correctly

  My phone Bluetooth, Wi - Fi and GPS connection does not work correctly. Bluetooth and wifi have the low range of connection and can barely connect what either. GPS won't work at all, so I can't use it for direction more.

  Take it to an Apple store for diagnosis.