Help! My number of County/selection of words disappeared from the bottom of my InCopy window.

Similar Questions

• Help with the query to select only one record from the result set in double

  Hello

  Please help with the query. Version of Oracle database we use is 10g R2.

  I have a vision that is duplicated IDS, but they are used across the different functions. See below examples of data. Please help me with a query to select only one record (based on ID regardless of the area) from the bottom of the result set of duplicate records. For what is the point of view is there unique records, given the combination of the fields ID, Org, DF, dry, Sub-Sec

  ID	Org	DF	Sec	Sub-Sec

  
  (163)CQCPDMCPDMHD(163)PCENGENGENG(163)CQASICASICIS8888TSTACTACTAC(163)TSHEHESW6789CQINFOINFOFOS6789PCSECSYSSECSYSINFO16789TSSECSYSSECSYSINFO29009PCBMSBMSBMS1

  My result set must eliminate the duplicate identifiers regardless of whoever we choose of the result set. (I mean without distinction Org, DF, s, Sub-s). My expected result set should be.

  ID	DSB

  
  DF
  SEC
  Sub-Sec
  (163)CQCPDMCPDMHD8888TSTACTACTAC6789CQINFOINFOFOS9009PCBMSBMSBMS1

  
  

  Thank you

  Orton
  

  Hello

  This sounds like a job for ROW_NUMBER:

  WITH got_r_num AS

  (

  SELECT id, DSB, df, s, sub_sec org

  ROW_NUMBER () OVER (PARTITION BY ID.

  ORDER BY org

  ) AS r_num

  OF view_x

  )

  SELECT id, DSB, df, sub_sec s,

  OF got_r_num

  WHERE r_num = 1

  ;

  He is a Top - N query example, where you choose the elements of N (N = 1 in this case) from the top of an ordered list.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) to your sample data and the results desired from these data.  (I know that you said that you were a view selection.  Just for this thread, pretending it is a picture and post simple CREATE TABLE and INSERT statements to simulate your point of view).
  Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.  (I didn't quite understand the explanation above.  I don't know why you want to

  ID ORG DF DRY SUB_SEC

  --      ---     --      ---     -------

  1234 CQ DPRK DPRK HD

  and is not

  1234 IS CQ ASIC, ASIC

  or

  TS 1234 IT IT SW

  or

  1234 CQ ASIC ASIC HD

  )
  If you change the query at all, post your modified version.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• "Select" menu is missing from the CC of Photoshop options bar. How can I add?

  "Select" menu is missing from the CC of Photoshop options bar. How can I add?

  Hi CsapodyM,

  What exact version of Photoshop are you using? (Help > about Photoshop)

  Post a screenshot of your Photoshop window.

  Kind regards

  Assani

• After a second, a number of categories disappear from the website and I can't read more?

  1. Question

  After a second, a number of categories disappear from the website and I can't read more?
  For instantance that I am looking for a telefoonnumber, I became the address and number once a second number disappears

  If you have installed Skype extension disable it.

• I am running windows xp sp3, the volume icon disappears from the taskbar on each reboot or shutdown/startup.kindly, help any permanent solution known.

  Hello!
  I am running windows xp sp3, the volume icon disappears from the taskbar on each reboot or shutdown/startup.kindly, help with any permanent solution known.i should go to the control panel and to recover it again whenever I turn my on.kindly advice, someone machine me a solution permanently this problem.i want to stay always on the taskbar the volume icon.
  the honest answer is expected... Thank you!

  Hello

  Try this:

  Control Panel - device - sounds Manager - note manufacturer device name and info on the graduating model.
  Double click and get the date and version of the driver (if 06 are dates, you use the default windows driver). Now
  Click the DRIVER UPDATE (this can not find anything because MS is far behind the certification of drivers). Now LAW
  CLICK above and UNINSTALL - REBOOT - it will refresh the driver stack.

  Now, go to the manufacturer of the system and recover the last pilot audio/Hi-Fi as a fall.

  Download it - SAVE - go to where you put it - RIGHT CLICK top - RUN AS ADMIN - REBOOT

  Now do the same for the manufacturer of the device (the one that made the device - if you were using the default windows
  you might need to look in the Device Manager - his new driver).

  Often, you will need to run the sound card drivers several times to get the latest version installed and will appear in
  Manager - Sound. This is because they make back the drivers one at a time and then finally install the
  most recent. Look in the Device Manager to be sure that you have installed the version of the driver is the one showing, if not
  run the driver again (reset each time) until the shows a correct.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Rob - bicycle - Mark Twain said it is good.

• Internet Explorer has disappeared from the Menu start - help to restore the arrow to the right for the recent actions etc.

  After a recent update, I seemed to lose my IE icon anywhere on the computer - I couldn't find iexplore.exe when you're looking for all of the C: drive, and the icon has disappeared from the start menu.

  I managed to install a Microsoft IE links and the software works very well.  However, when pinning the IE icon to the start menu, I just got a regular icon - I don't have the right arrow to go directly to a recent site / or InPrivate browsing etc.

  Does anyone know how to restore this feature?

  See you soon

  Jim

  Hello James,

  Thanks for the quick response and the screenshot sharing.

  I would ask to try the steps mentioned below, which will help you to get the start of the page you are looking for.

  1. Demarrer start on the desktop, press Windows key + R using the keyboard to bring up the run window.
  2. Type "Inetcpl.cpl ' in the run window to open Internet Explorer the window options." "
  3. In Windows Internet Explorer options, click the option "use new tab '
  4. Now click apply and then OK.

  For more information, see the screenshot:

  

  Hope the helps of information provided. Do we know the State of the question, so that we can better help you.

• Convert several Word files from the Explorer windows for PDFs with bookmarks

  Hello

  I used to be able to select several Word documents in Windows Explorer and convert them into multiple individual PDFs with bookmarks (using XP, Office 2007, Acrobat 8 Standard). Lately, my computer has been upgraded to Windows 7 with Office 2010 and Acrobat X Standard. The selection of multiple files function exist; However, I encounter following issues:

  
  Thank you

  c3000ca

  
  1. the converted files without all the bookmarks.
  2. save the file screen pop up twice. First asked me to save to where it begins to convert, after PDF conversion screen has finished, it will ask me again to save the file in the root directory, i.e. when the files are really saving.
  3. for each open Doc file, Word 2010 pop up a message will indicate that the normal template file has been changed and ask me if I want to store the update.

  
  I tried searching everywhere on the web and seems we do not encounter the problem. Did someone encouerting similar problem?  Is there a way to solve the problem?

  Finally, I reinstalled Office 2010 and Acrobat X Standard.  Everything went very well.  No found bugs.  It must be a problem during the installation of the program. Detective Conan.

• All 4 printers have disappeared from the list of printers & faxes; reason & need help please!

  Good day to all! (I hope yours goes better mine has)

  When you try to access my internet postage program, I got a message that it was unable to initialize the printer.  When I checked the list of Printers and faxes in Control Panel... I find 4 all printers who WERE there yesterday... are now gone.

  (This excerpt shown below is extracted from the Microsoft support page & described EXACTLY my problem)

  • When you click Startand then click Printers and faxes to try to view your printers, no printers appear. This problem may occur even if you have a printer installed.
  • When you click Add a printer, or when you try to print, you may receive the following error message and cannot add a printer:
  "Operation could not be performed.  Printer Spooler service is not running.

  I tried several times to use "Fix - it" Microsoft online service, and he could not solve the problem.  I just kep saying me he couldn't solve the problem.  It is absolutely No. MS supports available unless you have at least $59.00 or more to pay for trying to help!  "Terminal" and valid on a model of disability very limnited former fighters from one month to the other... I could not certainly not even begin to afford no paid... help unfortunately.

  I am NOT computer saavy and I don't any idea as well WHERE to start... much less HOW to solve this problem!  Unless I can get this printer spooler service, or something else... running... I can't even begin to try to re - install a printer I have.

  I would greatly appreciate any help anyone can offer!  I'm at the end of my tether here!  Thank you very much for your time and review!

  Pete C.

  For the moment, I'm inclined to let my "sleepine XP 'dog' lie'... Since things seem to work almost normal again.

  Good plan.

• development of select area seems disappeared from my machine

  development of select area seems missing from my machine. What should I do?

  You should find the forum for any product it is and post your questions there.

  Here is a link to a page that provides links to all of the Adobe forums...

  The Forum links page: https://forums.adobe.com/welcome

• Muse has disappeared from the machine, but still present on CC - cannot uninstall and it wont let me reinstall download help!

  All of a sudden all liinks - folders and files for muse disappeared from my office - I can get in the clouds - and CC shows my Muse is here - subscription and installed and up-to-date - BUT I can't open a file or run the propgram.

  After hours of reading - I can't uninstall - it does not show

  I can't reinstall - think the Download Manager it y al ready and used to let me download!

  -help!

  angelkisses at all

  Arlene

  Are you on a Mac?  Did you just install the 10.9.3 update?  It hides your users folder?  Have you updated iTunes to remedy this situation?

  http://www.MacRumors.com/2014/05/16/Apple-11-2-1-iTunes-bug-fix/

• Need help to identify the missing screws from the bottom of my 482PG-V7

  Hello, some of my screws fell off my 482PG-V7 and I was trying to identify who they are so that I could buy them online in laptopscrews.com. I tried to search through the online manual for V7-482PG, but I couldn't find the information.

  I have attached a screenshot here - if someone could help me please identify this it would be great, thank you!

  [under the direction of life private - deletion image which displays the serial number].

  M2.5x6mm should be the ones you need.

• Extraction of Word/text from the coordinates.

  Hi all

  With the help of getPageNthWordQuads I can correctly extract the coordinates. Now I want to know the content of the word/text available at the specified coordinates.
  

  Ex: Invoice: 183.360137939453,747.268737792969,215.490341186523,747.268737792969,183.360137939453,737. 807678222656,215.490341186523,737.807678222656,
  
  I would pass the same coordinates of return and get the word called Bill. Is there a feature like this.

  Thanks in advance,

  P.Srinivasa rao.

  It doesn't have any built-in method that can do this, but you can create your own method that checks if the some quads are contained in

  another set of quads. Be aware, however, that a Word can have several sets of quads...

• How to select and copy text from the address book of lightning, against duty open entry?

  I know, it is not possible to highlight and copy the text visible in the pane above it, with all the entries in address book or Contact. Am I missing a way to do this?

  It would, of course, the use of the address book in lightning much easier and faster to use if we could do. Please note that I did not edit. Instead, it is necessary to go through the same steps as if editing. That is, open properties and select the appropriate tab, highlight & copy said information, instead just to be able to quickly copy the text you want.

  It's just two more clicks and the conclusion of the text, which can be cumbersome in some Windows Small field, especially for the notes, but when you do it often, he of course becomes a pain. Notes, in particular, becomes a mini database to enter address, be it your personal record for product information for something (which could be extended if many of the parts of something like a specific computer have been identified), bought to share other contact information.

  A third is used especially when we need to get impossible to remember, like your BTC account security information. Keeping in the address book on a home computer, adds a little more security, but you can access it easily.

  Add more functions to the AddressBook allows several functions of copy.

  https://NIC-NAC-project.org/~kaosmos/morecols-en.html

• Disappeared from the hindi transliteration - suggestion of words pop up

  Hi all

  I have a MBP (retina, 15 ", mid-2015) with OS X El Capitan.

  Unfortunately, I am unable to view the details of my problem in the form of texts here because of the error "the message contains invalid characters."

  Please refer to the picture attached below.

  
  Any help as to how this functionality can be restored will be greatly appreciated. If the question is not clear, and you may need more detailed explanation, please let me know.

  Thanks in advance - the.

  Do you have this problem in all applications, including TextEdit?

  Try to configure a new user account and see if the problem persists when you are logged into that.

• All of a sudden disappeared from the library of images (with all of my photos). Help!

  I moved a few photos - around the image whole library disappeared.  I am able to take pictures through the bridge, but the photo library does not appear in the list of libraries and are not accessible. What should do? If you ask me how to create a new library of images and subfolders that would help settle.

  See if that helps,