Help needed in the management LR5.7 and color

Similar Questions

• I'm getting white gaps between the black contour lines and color fill on laser printer

  I'm getting white gaps between the black contour lines and color fill on laser printer

  You're welcome, Calotypist.

  Illy prefer PostScript because it gives you a reliable/complete (more) reproduction (depending on the version, you can also see (more) complete print failure).

  With a PDF basically tell you the printer where to put the points/tasks. Without it, the printer (pilot) has to figure (some) outside.

  If you can get one for the printer in question, a printer PostScript (emulation) driver will leave you direct printing.

• Help needed in the parameter validation and ownership

  Hello Denzz/Dupont,

  Sorry for the confusion between you guys, but please find a new parameter of condition that I need for a property evaluation and validation above top of it.

  I have 2 Essbase property i, e Essbase.ASO.DataStorage and Essbase.BSO.DataStorage that are defined with the default as empty from now.

  I want to do it derived property satisfying the scenarios below.

  (1) all the Member of sheet under hierarchy account should be Essbase.ASO.DataStorage = Nevershare

  All the Limb Member of the hierarchy that account must have Essbase.ASO.DataStorage = StoreData

  (2) all the leaf Member of the hierarchy that account must have Essbase.BSO.DataStorage = Nevershare

  All the Limb Member of the hierarchy that account must have Essbase.BSO.DataStorage = DynamicCalc

  (3) as it is requested to the point 2, all the sheet military under the hierarchy ought to have Essbase.BSO.DataStorage = Nevershare

  (with condition applied here)

  Essbase.Bso.Formula property if it is filled or have all the values in it, then Essbase.BSO.DataStorage should be replaced by DynamicCalc

  Alternatively it can be Nevershare if Essbase.Bso.Formula property is empty.

  
  

  
  

  I also want a parameter validation here, if the user tries to change all values in these two different properties of the derived value, then it should give them a validation error.

  
  

  Yes it would be then that node add and that was my main reason to ask if it worked - the fire

  The thing is it prevents the two properties ASO and storage BSO to have empty values and while creating nodes these accessories will be empty

  OK try this-

  If (PropValue (Core.Leaf),

  And)

  If)

  IsBlank (PropValue (Custom.Essbase.BSO.DataStorage)), it's true.

  If)

  IsBlank (PropValue (Custom.Essbase.BSO.Formula)).

  Equals (String, PropValue (Custom.Essbase.BSO.datastorage), Nevershare),

  Equals (String, PropValue (Custom.Essbase.BSO.datastorage), DynamicCalc)

  )

  ),

  If)

  IsBlank (PropValue (Custom.Essbase.ASO.DataStorage)), it's true.

  Equals (String, PropValue (Custom.Essbase.ASO.datastorage), Nevershare)

  )),

  And)

  If)

  IsBlank (PropValue (Custom.Essbase.ASO.DataStorage)), it's true.

  Equals (String, PropValue (Custom.Essbase.ASO.datastorage), StoreData)

  ),

  If)

  IsBlank (PropValue (Custom.Essbase.BSO.DataStorage)), it's true.

  Equals (String, PropValue (Custom.Essbase.BSO.datastorage), DynamicCalc)

  ))

  )

• Pls Help, I forgot the connection user name and email of my CC details.

  No idea how I can track my CC username and email id login using my credit card and the details of the phone. I need to update my credit card and also need the information for future use. With so many emails and connections, its all messed up and can barely remember.

  Please provide your order #, addresses e-mail in a private message we would certainly help you with this.

• Help needed on the export of the Photo App

  I'm a photo hobbyest with thousands of photos stored in my Mac using the Photos app. I already saved them on Time Machine and iCloud. However, I try to upload some on an external hard drive but can't.  The Photo app continues to CHANGE the resolution of my images when I export them.  Here is what happens...

  • I have uploaded a JPEG of 5 MB in the Photo app earlier this year.
  • Now, I'm ready to take a copy of this picture on my external hard drive.
  • If I just move the original photo to the Photo app on my counter top, the resolution GOES from 5MB to 2.1 MB.
  • If I export 'The Original unmodified' I lose all the changes that I made in the Photo app.
  • If I export the 'High' quality jpeg image, it DROPS my resolution of 2.1 MB.
  • If I export the photo to the "Maximum" quality jpeg, it INCREASES my resolution to 14.3 MB!
  • I found NO WAY to download my original photo size!

  Question... How to export or copy an image from within the app of the Photo on an external hard drive with the resolution of the EXACT SAME as it is?

  Thank you!

  You first need to understand the resolution - the file size is not resolution - the resolution concerns the dimensions in pixels of the image - file to a JPEG file size is determined by the compression you choose - compression of the image does not change the dimensions in pixels of all - compression removes the donnΘes form the pictures and all JPEG in theory is inferior finial an uncompressed image as TIFF - but for practically all the uses, it does not matter

  When you export a modified version of the photo you create a new file that contains the image and the size of the files is determined by the selections you make and has no resolution at all to the original file

  Photos has limited control over file size - ir you want a file size, then export a copy of very high quality (maximum or even a TIFF uncompressed) and use another program that gives you more control to compress in the JPEG compression you want

  But at the end of the day the size of the file is really no different and it is very likely that the big JPEG will give you the same results as an uncompressed TIFF

  LN

• Received an email about the management of accounts and the deletion of my emails: is it a scam

  That's what I got today:

  Scheduled maintenance
  Dear customer Windows,

  You have submitted a request to complete your windows account and the process started by our team of Windows Mail, please give us 3 business days to close your Windows Live account.

  All folders on your Windows Live account including (Inbox, Sent, Spam, trash, project, records) will be deleted and will be denied access to your Windows Live Mail account.

  To cancel the termination request click http://cancel.mail.windows/index and log.

  
  For further help please contact customer.

  
  Kind regards
  Windows Live Mail account services
  ______________________________ ______________________
  Please do not respond to this message. Mail sent to this address cannot be determined

  Help, please!

  Yes, the link is not microsoft.com and you are not a Windows client, you are a customer of Microsoft

  In addition, the website is incorrect and shows a top-level domain 'windows' which is not valid.

• Help! 'remove the rendered JavaScript blocking' and 'leverage browser caching.

  My site Adobe Muse, www.realtorindfw.com, (desktop version) loading fine until yesterday. Now it loads very slowly, I tried to reduce the size of the image, thinking that maybe the problem (even if it used to load incredibly fast even when the images were 4 x greater, so I never thought that). When that didn't fix the problem I typed my website in Google PageSpeed and found that the main problem is that I need to 'remove the rendered JavaScript blocking' and "leverage browser caching."

  It seems that the main problem is that the file, http://webfonts.creativecloud.com/...eue:n4:all; open-without - condensed:n3:all.js, is apparently rendered blocking JavaScript which is causing all the rest to be delayed, because images can not load until this line is resolved and that can take up to a minute. Reading online, it seems that if I could move this line of code to the bottom, then it don't take everything, because no assets would be behind it. I obviously know nothing about good coding (that's why I use Muse). How can I go about solving this problem of render-blocking JavaScript?

  In addition, the issue of "leverage implementing caching of the browser" is that some images have an expiration are associated. I do not think this has nothing to do with me and is rather a kind of problem of Muse. Is there a way can I fix?

  My page was loading fine, until I downloaded randomly once again, and all these problems started. Please type my site in PageSpeed and address the problems of the desktop version and see if you can understand how this can be resolved. This is my professional site, so yes, I'm trying to get it fixed as soon as possible. I also discussed with support chat and they said that the best way to get it resolved would be to post it here. Thank you.

  debp83130756 if your page is slow to load, start a new thread here on the forum, ask for advice on improving the performance of page loading, and include the URL of the page. (A new thread will attract more attention than to post a reply in a thread that has been dormant for more than a year.)

  PageSpeed side has surprisingly little to page load performance as experienced by a visitor to the site and is not related to SEO or your Google page ranking.

  Him "generally render JavaScript blocking" on a Muse page is code that starts to load Web fonts. If it was moved later then the content of your page may appear a fraction earlier, but it appears in the wrong font, and then jump around to settle once the police you wanted has been loaded. Most of the people prefer to avoid content in the police hurt, insofar as that it can be avoided.

• find out all the line last character and color fill

  Dear friend,

  I need to find all the last character and fill color of line (no need to the last character of words).

  My code problem: no space in the last character is not the fill color.

  My code is below:

  var myDocument = app.activeDocument;  
  var myLine = myDocument.stories.everyItem().lines.everyItem().getElements();  
  for(i=0; i<myLine.length; i++)  
  {  
      var myCon = myLine[i].texts[0].contents;  
      if(myCon.match(/\n| /gi) != null){  
          try{  
              if(myLine[i].characters.item(-2).fillColor = myDocument.colors[2]);
              }catch(e){}  
          }  
      }  
  

  My screenshot as below:

  

  Please suggest a friend

  Thanks in advance

  KS

  Add a ' if else ' statement to apply the fill color to the second to the last character only if the last character is a space. otherwise apply the fill color for the last character.

  myDocument var = app.activeDocument;

  myLine var = myDocument.stories.everyItem ().lines.everyItem () .getElements ();

  for (i = 0; i

  {

  Chantal var = myLine [i] .texts [0] .silence;

  If (myCon.match (/ \n| IM)! = null) {}

  try {}

  If (myLine [i].characters.item-(1) .silence == "'" ") {}

  myLine [i].characters.item-(2) .fillColor = myDocument.colors [2];

  } else myLine [i].characters.item-(1) .fillColor = myDocument.colors [2];

  } catch (e) {};

  }

  }

• Change the sizes of fonts and colors without CSS [was: such a n00b]

  I can't believe I have to ask this question, but I want to change the font sizes, styles of fonts and colors in fashion Design CS5 (recently updated), but using HTML tags, not CSS.  If I use the properties panel in HTML only appear bold and italic, options where are other options gone?

  I found alignment on the Format menu, but every time I use this menu to change the font style that seems to get forced to CSS, and for the life of me, I can't find how to change the font size without having to edit the HTML code in code view, which I don't.

  Can such a n00b, anyone help please?

  [Subject line edited for clarity by Moderator]

  It is not uncommon, and talking about who I think that more people should use the Adobe - feature request/Bug Report Form and request a feature to turn on an entire document inline styles, because it is common to do for HTML emails like Great Outlook thing and is more picky and problematic email client It is a bit like IE, although IE is trying to move forward.

  In the Properties window, click then target CSS rule and choose the inline Style.  Then, Dreamweaver will apply an inline style for the element.  It will always write the CSS code, which is the right way, but it will write it inline, which is the case when you can not link to external CSS files.

• I need help to round the corners PS CS6 and Windows 7

  Hello

  I searched, watched videos and more to try to find a way round the corners on my picture. I followed that statement were available and still no luck. I will describe what I've done.

  Goal: Rounded corners on photo 960 px x 250 px for a Web site. RADIUS 35 px. Photo size already the way I need it. Background should be transparent saved in png format 24 therefore shows nothing except the picture with rounded corners.

  First step:

  I insert image in Photoshop

  

  Second step:

  Use the rounded rectangle tool:

  

  Step 3:

  Move the layer of the photo to the top of my rounded rectangle layer

  

  Step 4:

  Clip line Alt + Enter between the layers: I get anything other than transparency.

  

  Step 5:

  Merge visible layers. Still nothing.

  

  Any help would be appreciated.

  Thank you

  Ensure that the vector mask empty targets before you draw the rounded rectangle. It must have been automatically when the layer is added, but you can target it at any time by clicking on its thumbnail to the right of the thumbnail of the layer in the layers panel.

  In addition, Cmd/Ctrl-click on the Add button hides at the bottom of the layers panel is the same as layer > vector mask > reveal all.

• Help me escape the sellers of Microsoft and find the info I really need.

  Go to the Microsoft Windows site reminds me of the day I went to B N & buying a nook tablet. I had already decided I was going to buy the Tablet after a lot of time researching the pros and cons, I entered the store and told the sweet saleswoman that I was about to buy the tablet. She launched into the sale speel, I barely managed to stop me to tell him that I probably know more about this tablet that she will never be. Of course, she did all the work required of him by his bosses, and I can not fault him to irritate me in the process.

  I may be an irrational aversion to advertising and sales tactics, and when a company continues to try to sell me a product I have bought and I am just looking to buy additional copies, I get positively Livid and out of sorts.
  Is there a place for those of us already sold on Windows operating system and other products, looking for all versions and options available (and buy) without be bombarded with virtual characters from sales at every turn.
  That's why I would rarely brick and mortar stores to buy things when I can avoid it. The net is unfortunately more the oasis of pushy sales people it once was.

  Hello

  Apologize for the delay in replying.

  Your question related to chat on Microsoft product offerings, Microsoft Software Assurance program is appropriate for the MSDN Forums.

  I suggest you to post your questions here: http://msdn.microsoft.com/dn308572#fbid=8wrjtzwqmcn

  Become a member to enjoy the full MSDN: http://social.msdn.microsoft.com/profile/

  Thank you.

• Need some advice management on why and how I deliver ThinApp had in view the apps

  Why should I listen to apps? Is there a documentation out there to help?

  Please take a look at this document the performance of Streaming:

  http://www.VMware.com/files/PDF/VMware_ThinApp_Streaming_Execution_Mode_Information_Guide.PDF

• A Forum on the management of account and why not be able to select an E-mail for Communications

  So, just reactivated my account you added a secondary E-mail went to choose for Adobe communications with me and low and here is Adobe will send only e-mail to the main account used to connect.  What is happening with this?  Just seems to me that if I add another email MANAGEMENT section OF THE ACCOUNTS it must be offered as a place to send current affairs.  In addition to the hope that this is the right Forum because I did not see a forum for MANAGING THE ACCOUNTS.

  Dave actually these requests can be completed by the customer support because they need approval by call/chat.

  It is an open forum and therefore comes from the customer support option.

• Help, My Desktop Download Manager CC freezes and does not start

  Hello, I have a seat in the Kiewit Enterprise license, but I need to download Audition and when I click on the download link, my manager everything appears white and the circle of death starts to spin then freezes for hours? What can I do?

  Thank you in advance,

  Terry Harrold

  Terry I would recommend working in the service of your computer to verify that your deployed hearing plant is installed correctly.

• need for the connections of credentials and hosts

  I'm new in oracle database 11g, I want to load the data in a user file using oracle Enterprise manager to my database schema, but I found the problem of reception credentials and connection (host user and password). I tried to use the information in my database instance identification, but there is an error 'password and/or invalid username'.
  Please, help me.

  As long as I remember that there is a group in windows, you must add that user to administrator it.you will find windows group as its name starts with ora.
  Kind regards
  Mohamed