help on the visualization of the cfm files

Similar Questions

• Is anyway that I can transfer music from my iphone to itunes to help locate the missing files of the song

  So today, I opened itunes and about half of my music files were missing. A message came when I tried to click on a song and says that it is impossible to locate the files and the missing files now have an exclamation mark next to them. My iphone 6 has all the music files still on it and I am able to read them. I had happen in the past with one or two songs that have disappeared and I tried to connect my iphone to try and resynchronizing the file of the song, but just itunes erases songs out of my iphone, so I re-download just them, although it is a big problem. But because there are about 400 songs missing I need help to solve this problem. If anyone can help it would be greatly appreciated thanks!

  IPhone - ios 9.2

  ITunes - 12.3.1

  See the empty/corrupted after upgrade/crash iTunes library or

  Recover your iTunes from your iPod or an iOS device.

  TT2

• Help restore the temporary files

  I just restored my Dell Dimension 4700 to factory settings, but before I did, I used the file and Transfer Wizard to transfer all my files on an external hard drive up, but I don't know how to restore them now that I am up and running again.  They seem to be in Temp folders.  Any help ASAP would be certainly appreciated.

  External hard drive LaCie and Genie Backup Software that comes with it is what the Temp files are on (at least this is what I think it is).  The files settings and Transfer Wizard helped me transfer my files before I restored my system to factory settings, but I do not see how to restore now.  Help

  Brooklyn Babe

  Babe from Brooklyn,
  All you need to do is to run the transfer Assistant again, and when it starts it will ask if it's the new pc or old.  Say that it's new and then he will be asked where the files are located and you direct them to the reader.  NOW, I did this on a pc once and had a little problem with the service pack level.  The SP should be the same as on the old machine.  for example, I saved on SP2, and I tried to restore the SP3 and it wouldn't work.  I had to remove the SP3 and then restore. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria!

• help on the photo files please

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: i have connected my drive hard dvr to my computer to read the miv files but I can not open files

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        What happens when you try to open the files? You get the error message on the system?

  ·        What program do you use to open the files on the system? Do you have any third-party program installed on the system?

  ·        Were you able to open these files before on the system?

  Give details, so that we can help you in a better way.

  File MIV is a seller of MapImagery profile. MapImagery is a free plugin for users of MapInfo providing tools that makes it easier to use imagery in MapInfo Professional.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help updated the VMX file on several Virtual Machine

  All,

  Can anyone help with a problem I'm having?  Here is a brief explanation of what is happening and what we need to solve.

  Recently we found out that we need to add a line in the file VMX of several virtual machines.  In the past, I was able to do this, but would have cold start the virtual machine for the changes to take effect.  Starts cold won't be a problem, because we can program it.

  However, no one knows a way to add this line in the file VMX virtual machines in a cluster.

  Here's the line I need added:

  Devices.hotplug = "false".

  Here is a script that was used earlier (esx 3.0 days) to keep the VM tools updated on reboot.  At this point, if the virtual machine has been turned on, this change could not do through the UI.  However, this script worked to update the .vmx file and then we have cold reboots for the changes to take effect.

  Get-viserver - < Server > - < user > - < password >

  $viview = get-Cluster-name NOMCLUSTER | Get - VM | foreach-object {get-view ($_.ID)}
  $viview | {foreach-object
  $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec
  $vmConfigSpec.Tools = new-Object VMware.Vim.ToolsConfigInfo
  $vmConfigSpec.Tools.afterPowerOn = 'True '.
  $vmConfigSpec.Tools.afterResume = 'True '.
  $vmConfigSpec.Tools.beforeGuestStandby = 'True '.
  $vmConfigSpec.Tools.beforeGuestShutdown = 'True '.
  $vmConfigSpec.Tools.ToolsUpgradePolicy = "UpgradeAtPowerCycle".
  $_. ReconfigVM ($vmConfigSpec)
  }

  The exact script can be found in Disable HotPlug

• need help: enter the flash file in Dreamweaver site with dark background

  Hello
  I entered a SWF in a site dreamweaver with a dark blue background. When you view the site in a browser, there is a white square (the size of the flash file) which flashes for one second before the file begins to load. It is rather ugly and I was wondering if anyone knew how to avoid this white square of flashing to the top.
  I tried already to make the bottom of dark blue table and adding a dark blue square as a background image, but that didn't make a difference.
  If you do not want to see what he does, it is a link to a page: www.billmather.co.uk/portraits.htm
  Thank you in advance for any help or advice you can give me!
  
  
  

  Hey Horus,
  It worked! Thank you very much. Really appreciate your help.
  Have a good weekend,

  Famke222

• Help on the snapshot files and delta

  Hello

  Last night, does not have an ArcServe backup on a single virtual machine.  Not the end of the world, that has happened before.

  This morning, received an alert from a script that I coded to look for * delta * files on our data store.  A delta file has been abandoned here. We have to drive on this machine and the file only delta remained for one of these discs. Usually, all I have to do is create a new snapshot, delete all snapshots and everything returns to normal.  This time, the Delta stayed there.

  So I tried to create another snapshot option (with suspend it), as mentioned in the vmware.  He failed (Timed out).  Damn now I stuck out there for all of our disc delta files.  Tried again with the options suspend like 10 minutes after.  Works.  Delete all snapshots, works, but still stuck with these delta files.

  OK, the thing is all these 00000?-files delta does not appear to be used, as the modification date remained at the time of the snapshot.

  And also, the .vmx file doesn't seem to point to the delta files.  Then maybe I could safely remove?

  Here is some info.

  -------------------------------------

  LS - Flatr (sorted by modification date)

  / vmfs/volumes/5277f3fe-dc1ba57b-C0E6-1cc1de225128/Apps-Server1_4vtl6 # ls - Flatr

  -rw - 1 root root 602 2 December 2013 APPS - Server1_4vtl6_4.vmdk

  -rw - 1 root root 602 2 December 2013 APPS - Server1_4vtl6_3.vmdk

  -rw - 1 root root 602 2 December 2013 APPS - Server1_4vtl6_1.vmdk

  -rw - 1 root root 599 2 December 2013 APPS - Server1_4vtl6.vmdk

  drwxr-xr-t 1 root root 1400 December 2, 2013... /

  -rw - r - r - 1 root root 267858 December 2, 2013 vmware - 1.log

  -rw - r - r - 1 root root 367566 December 2, 2013 vmware - 2.log

  -rw - r - r - 1 root root 539395 Jan 14 14:58 vmware - 3.log

  -rw - 1 root root 8684 May 22 11:59 APPS - Server1_4vtl6.nvram

  -rw - r - r - 1 root root 3279104 30 mai 18:23 4.log - vmware

  -rw - 1 root root 602 30 mai 18:24 APPS - Server1_4vtl6_2.vmdk

  -rw - 1 root root 3865051136 30 mai 18:24 APPS-Server1_4vtl6 - e9c5721a.vswp

  -rw - r - r - 1 root root 273 30 mai 18:25 APPS - Server1_4vtl6.vmxf

  -rw - 1 root root 288 3 Jun 06:21 APPS-Server1_4vtl6_4 - 000002.vmdk

  -rw - 1 root root 45056 3 Jun 06:21 APPS-Server1_4vtl6_4-000002 - delta.vmdk

  -rw - 1 root root 422 3 Jun 12:00 APPS-Server1_4vtl6_3 - 000002.vmdk

  -rw - 1 root root 16822272 on 3 June 12:00 APPS-Server1_4vtl6_3-000002 - delta.vmdk

  -rw - 1 root root 422 3 Jun 12:00 APPS-Server1_4vtl6_2 - 000002.vmdk

  -rw - 1 root root 16850944 on 3 June 12:00 APPS-Server1_4vtl6_2-000002 - delta.vmdk

  -rw - 1 root root 422 3 Jun 12:00 APPS-Server1_4vtl6_1 - 000002.vmdk

  -rw - 1 root root 16822272 on 3 June 12:00 APPS-Server1_4vtl6_1-000002 - delta.vmdk

  -rw - 1 root root 417 3 Jun 12:00 APPS-Server1_4vtl6 - 000002.vmdk

  -rw - 1 root root 422 3 Jun 12:00 APPS-Server1_4vtl6_4 - 000003.vmdk

  -rw - 1 root root 16822272 on 3 June 12:00 APPS-Server1_4vtl6_4-000003 - delta.vmdk

  -rw - 1 root root 16904192 on 3 June 12:01 APPS-Server1_4vtl6-000002 - delta.vmdk

  -rw - 1 root root 3932672 on 3 June 12:01 APPS-Server1_4vtl6-000002 - ctk.vmdk

  -rw - r - r - 1 root root 13 on 3 June 13:59 APPS-Server1_4vtl6 - to the .xml

  -rw - r - r - 1 root root 45 3 Jun 14:00 APPS - Server1_4vtl6.vmsd

  -rw - 1 root root 1311232 on 3 June 14:00 APPS-Server1_4vtl6_1 - ctk.vmdk

  -rw - 1 root root 3932672 on 3 June 14:00 APPS-Server1_4vtl6 - ctk.vmdk

  -rw - 1 root root 1311232 on 3 June 14:00 APPS-Server1_4vtl6_4 - ctk.vmdk

  -rw - 1 root root 1311232 on 3 June 14:00 APPS-Server1_4vtl6_3 - ctk.vmdk

  -rw - 1 root root 2294272 on 3 June 14:00 APPS-Server1_4vtl6_2 - ctk.vmdk

  drwxr-xr-x 1 root root 5740 3 Jun 14:00. /

  -rwxr-xr-x 1 root root 3923 3 Jun 14:06 APPS - Server1_4vtl6.vmx *.

  -rw - r - r - 1 root root 2004374 3 Jun 17:53 vmware.log

  -rw - 1 root root 21474836480 3 Jun 17:54 APPS-Server1_4vtl6_3 - flat hard

  -rw - 1 root root 64424509440 3 Jun 17:55 APPS-Server1_4vtl6 - flat hard

  -rw - 1 root root 37580963840 3 Jun 17:56 APPS-Server1_4vtl6_2 - flat hard

  -rw - 1 root root 21474836480 3 Jun 17:56 APPS-Server1_4vtl6_1 - flat hard

  -rw - 1 root root 21474836480 3 Jun 17:56 APPS-Server1_4vtl6_4 - flat hard

  ---------------

  # cat APPS - Server1_4vtl6.vmx

  . Encoding = 'UTF-8 '.

  config.version = '8 '.

  virtualHW.version = "7".

  pciBridge0.present = 'TRUE '.

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge4.functions = '8 '.

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge5.functions = '8 '.

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge6.functions = '8 '.

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  pciBridge7.functions = '8 '.

  vmci0. Present = 'TRUE '.

  NVRAM = "APPS - Server1_4vtl6.nvram.

  virtualHW.productCompatibility = "hosted".

  powerType.powerOff = 'soft '.

  powerType.powerOn = "hard."

  powerType.suspend = "hard."

  powerType.reset = 'soft '.

  displayName = "D-APP-Server1 - 2 k 8".

  extendedConfigFile = "APPS - Server1_4vtl6.vmxf.

  numvcpus = '2 '.

  scsi0. Present = 'TRUE '.

  scsi0.sharedBus = 'none '.

  scsi0.virtualDev = "lsisas1068".

  memsize = "4096".

  scsi0:0. Present = 'TRUE '.

  scsi0:0. FileName = "APPS - Server1_4vtl6.vmdk.

  scsi0:0. DeviceType = "scsi-disk" hard

  scsi0:1.present = 'TRUE '.

  scsi0:1.filename = "APPS - Server1_4vtl6_1.vmdk.

  scsi0:1.DeviceType = "scsi-disk" hard

  scsi0:2.present = 'TRUE '.

  scsi0:2.filename = "APPS - Server1_4vtl6_2.vmdk.

  scsi0:2.DeviceType = "scsi-disk" hard

  scsi0:3.present = 'TRUE '.

  scsi0:3.filename = "APPS - Server1_4vtl6_3.vmdk.

  scsi0:3.DeviceType = "scsi-disk" hard

  scsi0:4.present = 'TRUE '.

  scsi0:4.filename = "APPS - Server1_4vtl6_4.vmdk.

  scsi0:4.DeviceType = "scsi-disk" hard

  IDE1:0. Present = 'TRUE '.

  IDE1:0. FileName = "".

  IDE1:0. DeviceType = "atapi cdrom.

  IDE1:0.startConnected = "FALSE".

  ethernet0. Present = 'TRUE '.

  ethernet0.virtualDev = "e1000".

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0.networkName = 'network of the Virtual Machine.

  ethernet0. AddressType = 'vpx.

  ethernet0.generatedAddress = "00:50:56:a9:6 has: 33»

  disc. EnableUUID = 'TRUE '.

  guestOS = "windows7srv-64.

  annotation = "Base of OMF Windows 2008 R2 EE server. | 0 a 4 cpu, 8 GB Mem"

  UUID. BIOS = ' 42 29 04 07 e8 52 5f - f5 02 ba da f1 78 cc e5 c5.

  VC. UUID = "50 29 4 c 34 2f fa 27 79 - 56 06 4 34 27 97 c6 a1.

  SCHED. CPU.min = '0 '.

  SCHED. CPU. Units = "mhz".

  SCHED. CPU.shares = 'normal '.

  sched.mem.MinSize = "410".

  SCHED.mem.shares = 'normal '.

  svga.vramSize = "33554432.

  vmci0.ID = "2026228965".

  tools.syncTime = "FALSE".

  UUID. Location = "56 4 d b5 3rd 5A d9 bc 70-65 30 52 f f2 1 d 2d 20.

  cleanShutdown = "FALSE".

  Replay.Supported = "FALSE".

  unity.wasCapable = "FALSE".

  sched.swap.derivedName = ' / vmfs/volumes/5277f3fe-dc1ba57b-c0e6-1cc1de225128/APPS-Server1_4vtl6/APPS-Server1_4vtl6-e9c5721a.vswp '.

  Replay.FileName = «»

  scsi0:0. Redo = «»

  scsi0:1.redo = «»

  scsi0:2.redo = «»

  scsi0:3.redo = «»

  scsi0:4.redo = «»

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  scsi0.pciSlotNumber = "160".

  ethernet0.pciSlotNumber = "32".

  vmci0.pciSlotNumber = "33".

  scsi0.sasWWID = "50 05 05 67 ba 52 50 e8.

  vmotion.checkpointFBSize = "33554432.

  hostCPUID.0 = "0000000b756e65476c65746e49656e69".

  hostCPUID.1 = "000206c200200800029ee3ffbfebfbff".

  hostCPUID.80000001 = "0000000000000000000000012c 100800.

  guestCPUID.0 = "0000000b756e65476c65746e49656e69".

  guestCPUID.1 = "000206c200010800829822030febfbff".

  guestCPUID.80000001 = "00000000000000000000000128100800".

  userCPUID.0 = "0000000b756e65476c65746e49656e69".

  userCPUID.1 = "000206c200200800029822030febfbff".

  userCPUID.80000001 = "00000000000000000000000128100800".

  evcCompatibilityMode = "FALSE".

  IDE1:0.clientDevice = 'TRUE '.

  scsi0:0.ctkEnabled = 'TRUE '.

  scsi0:1.ctkEnabled = 'TRUE '.

  scsi0:2.ctkEnabled = 'TRUE '.

  scsi0:3.ctkEnabled = 'TRUE '.

  scsi0:4.ctkEnabled = 'TRUE '.

  ctkEnabled = 'TRUE '.

  scsi0:5.DeviceType = "scsi-disk" hard

  scsi0:6.DeviceType = "scsi-disk" hard

  scsi0:8.DeviceType = "scsi-disk" hard

  scsi0:9.DeviceType = "scsi-disk" hard

  scsi0:10.DeviceType = "scsi-disk" hard

  guest.commands.sharedSecretLogin.hostd - quiescedsnap = ""

  SCHED.scsi0:2.shares = 'normal '.

  SCHED.scsi0:2.throughputCap = 'off '.

  floppy0. Present = "FALSE".

  Thank you!!!

  Indeed, it looks like some files are orphans. If it is possible to turn off the virtual machine for a short period, I would say that you do this, then move the hard orphaned directory and power on the virtual machine again. If everything works, delete the subdirectory, including files. What I found useful is RVTools that reports these files as "Zombies".

  André

• Need help with the advanced file Type changes

  Somehow all my folders of changed files option.  Instead of the folder when you click it, it opens the search.

  I know where and what to change, just do not know how.  Under Tools > folder options > file types, I select "files" and click "Advanced".  Of course, it says 'find '.  I click on 'new' under 'action', I type 'open', but what should I put under "Application used to perform action:"?  It won't let me not leave the field empty.  When I looked to see how it was done in 'file', 'edit' is gray.  I tried to look on other computers, but everyone has Vista, Vista doesn't even have a tab "file type" under folder options and I couldn't find it anywhere else.

  Even if you don't know the answer, if you could look to see what it says on your computer and let me know.  Like I said could not find on Vista, I am running XP.

  Yes, I know that I can do a right click on the folder and open it, and that's what I do.  It really happened to be a pain in the you-know-what.

  Any help would be greatly appreciated.

  I've reposted under the topic "Pls! I just need someone to look at their own computer! »

  If you are interested in the solution is there.

• Need help with the batch file command - move all files/folders

  I need help creating a simple batch file that performs the following operations:

  Move all files AND folders in a source folder to a target folder. The source folder will be mklinked with the target folder and an infinite loop can be possible, not sure if any order would be necessary here to avoid this? Executed once A thing, or a thing to stop?

  It comes to free up space on an SSD by iTunes forced location for backups and apps to be physically on another HARD drive, but available as if it were in default location.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Compaq Presario SR2177 BSOD Win 7 - help analyze the .dmp file.

  New installation of Win 7 Home Premium, Compaq Presario SR2177CL.

  AMD X 2 3800 + 2 GHz Dual-Core CPU

  1 GB of DDR2 Ram (2 x 512)

  HDD Sata 200 GB WD

  After a clean, led installation to all updates MS blue screens started.

  MemTest 86 +: pass

  HARD drive test: pass

  Last crash dump file is here:

  https://SkyDrive.live.com/?CID=e714ffc82e58b1a6#CID=E714FFC82E58B1A6&ID=E714FFC82E58B1A6%21174

  As noted, this is a clean install, online only for MS. updates I tried to parse the file .dmp myself, but certainly need some help here.

  Power supply tested ok without ceiling blown on the Council, the onboard video, the lan & sound. No cards installed.

  Blue screen appears almost immediately once the initialization is complete.

  Thanks in advance for any suggestions.

  PDI

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.

  
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• help with the dump file

  Hello world. IM new here and recently my computer gives me a few problems and restarts itself. Here's the crash dump files. can someone help me a this?

  https://SkyDrive.live.com/redir?RESID=A3CBE9613CDF601E%21474

  Hello

  We have two discharges with the same bug control - BAD_POOL_CALLER (c2)

  This indicates that the current thread is doing a bad pool request.

  If we take a look at the call stack:

  STACK_TEXT:
  fffff880 '0bcf4078 fffff801' 060e3a6e: 00000000'000000 c 2 00000000'00000007 00000000'000011 c 1 00000000'0503028 d: nt! KeBugCheckEx
  fffff880 '0bcf4080 fffff880' 044b63ea: fffff8a0 '14ca68e0 00000000' 40001880 fffffa80 '09e23370 fffffa80' 494e494d: nt! ExFreePool + 0 x 984
  "fffff880 '0bcf4160 fffff8a0' 14ca68e0: 00000000 ' fffffa80 40001880 '09e23370 fffffa80' 494e494d fffff880 ' 0bcf49cc: atikmdag+ 0xb63ea
  fffff880 '0bcf4168 00000000' 40001880: fffffa80 ' 09e23370 fffffa80 '494e494d fffff880' 0bcf49cc fffffa80 ' 0b54b680: 0xfffff8a0'14ca68e0
  fffff880 '0bcf4170 fffffa80' 09e23370: fffffa80'494e494d fffff880 '0bcf49cc fffffa80' 0b54b680 00000000' 4b550d70: 0 x 40001880
  fffff880 '0bcf4178 fffffa80' 494e494d: fffff880'0bcf49cc fffffa80 '0b54b680 00000000' 4b550d70 fffff880' 0449c5c3: 0xfffffa80'09e23370
  fffff880 '0bcf4180 fffff880' 0bcf49cc: fffffa80 '0b54b680 00000000' 4b550d70 fffff880' 0449c5c3 00000000'40001880: 0xfffffa80'494e494d
  fffff880 '0bcf4188 fffffa80' 0b54b680: 00000000' 4b550d70 fffff880'0449c5c3 00000000'40001880 00000000' c0000000: 0xfffff880'0bcf49cc
  fffff880 '0bcf4190 00000000' 4b550d70: fffff880 '0449c5c3 00000000'40001880 00000000' c0000000 fffff880' 0bcf4330: 0xfffffa80'0b54b680
  fffff880 '0bcf4198 fffff880' 0449c5c3: 00000000'40001880 00000000' c0000000 fffff880 '0bcf4330 00000000' 00004000: 0x4b550d70
  fffff880 '0bcf41a0 00000000' 40001880: 00000000' c0000000 fffff880 '0bcf4330 00000000'00004000 fffff880' 0bcf49cc: atikmdag+ 0x9c5c3
  fffff880 '0bcf41a8 00000000' c0000000: fffff880 '0bcf4330 00000000' 00004000 fffff880 '0bcf49cc fffff880' 0bcf49d0: 0 x 40001880
  "fffff880 '0bcf41b0 fffff880' 0bcf4330: 00000000 ' 00004000 fffff880 '0bcf49cc fffff880' 0bcf49d0 fffff880 ' 0bcf49d4: 0xc0000000
  fffff880 '0bcf41b8 00000000' 00004000: fffff880'0bcf49cc fffff880 '0bcf49d0 fffff880' fffff8a0 00000000' 0bcf49d4: 0xfffff880'0bcf4330
  "fffff880 '0bcf41c0 fffff880' 0bcf49cc: fffff880 '0bcf49d0 fffff880' 0bcf49d4 fffff8a0 ' 00000000 fffffa80 ' 0b54b680: 0x4000
  "fffff880 '0bcf41c8 fffff880' 0bcf49d0: fffff880 ' 0bcf49d4 fffff8a0 ' 00000000 fffffa80 ' 0b54b680 fffff880 ' 0bcf4210: 0xfffff880'0bcf49cc
  "fffff880 '0bcf41d0 fffff880' 0bcf49d4: fffff8a0 ' fffffa80 00000000 '0b54b680 fffff880' 0bcf4210 fffff880 ' 0bcf43e0: 0xfffff880'0bcf49d0
  fffff880 '0bcf41d8 00000000 fffff8a0': fffffa80'0b54b680 fffff880 '0bcf4210 fffff880' 0bcf43e0 00000000' 00000000: 0xfffff880'0bcf49d4
  "fffff880 '0bcf41e0 fffffa80' 0b54b680: fffff880 '0bcf4210 fffff880' 0bcf43e0 00000000'00000000 00000000'00000000: 0xfffff8a0 00000000"
  fffff880 '0bcf41e8 fffff880' 0bcf4210: fffff880 '0bcf43e0 00000000'00000000 00000000'00000000 fffff880' 0bcf4588: 0xfffffa80'0b54b680
  fffff880 '0bcf41f0 fffff880' 0bcf43e0: 00000000'00000000 00000000'00000000 fffff880 '0bcf4588 fffff880' 0bcf48bc: 0xfffff880'0bcf4210
  fffff880 '0bcf41f8 00000000' 00000000: 00000000 00000000' fffff880 '0bcf4588 fffff880' 0bcf48bc fffffa80'06914028: 0xfffff880'0bcf43e0

  Failed to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for atikmdag.sys
  ERROR: Module load completed but symbols can be loaded for atikmdag.sys
  GetPointerFromAddress: unable to read from fffff801061c9168
  Unable to get nt! MmPoolCodeStart
  Unable to get nt! MmPoolCodeEnd
  Probably caused by: atikmdag.sys ( atikmdag + b63ea )<--- match="" from="" the="" call="">

  ^^ AMD/ATI video driver.

  Make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  -----------------------------------------------------------------

  If you're still crashing after the above, remove and replace BitDefender with built-in Windows Defender from Windows 8 for troubleshooting purposes:

  BitDefender removal - http://www.bitdefender.com/support/how-to-uninstall-bitdefender-333.html

  Kind regards

  Patrick

• help with the snapshot files orphans and ghettovcb on esxi3.5

  I'm trying to back up a single vm on my box esxi3.5 but ghettovcb guard complain that there is already a snashop

  
  

  None of them appear in the snashot Manager.

  I tried creating and deleting a snapshop using snapshot Manager, but these files persist and prevent the backup of this virtual ghettovcb machine.

  any help out there?

  should I remove?

  I'm under esxi3.5

  / vmfs/volumes/4af43c5b-3edb7050-7ec1-000e7feef085/SiteServer # ls-l
  -rw - 1 root root 16820736 29 August 08:13 siteserver-000001 - delta.vmdk
  -rw - 1 root root 229 29 August at 08:05 siteserver - 000001.vmdk
  -rw - 1 root root 16820736 29 August at 08:17 siteserver-000002 - delta.vmdk
  -rw - 1 root root 236 29 August 08:13 siteserver - 000002.vmdk
  -rw - 1 root root 16820736 29 August at 08:17 siteserver-000003 - delta.vmdk
  -rw - 1 root root 236 29 August at 08:17 siteserver - 000003.vmdk
  -rw - 1 root root 16820736 29 August at 08:20 siteserver-000004 - delta.vmdk
  -rw - 1 root root 262 29 August at 08:19 siteserver - 000004.vmdk
  -rw - 1 root root 419473920 29 August at 09:03 siteserver-000005 - delta.vmdk
  -rw - 1 root root 236 29 August at 08:59 siteserver - 000005.vmdk
  -rw - 1 root root 83929600 29 August at 09:24 siteserver-000006 - delta.vmdk
  -rw - 1 root root 262 29 August at 09:06 siteserver - 000006.vmdk
  -rw - 1 root root 16820736 29 August at 09:27 siteserver-000007 - delta.vmdk
  -rw - 1 root root 236 29 August at 09:24 siteserver - 000007.vmdk
  -rw - 1 root root 18915 29 August at 09:24 siteserver - Snapshot672.vmsn
  -rw - 1 root root 402653184 29 August at 08:59 siteserver - f7f25df0.vswp
  -rw - 1 root root 21484431360 29 August at 08:05 siteserver - flat hard
  -rw - 1 root root 8704 29 August at 08:59 siteserver.nvram
  -rw - 1 root root 403 29 August to 01:23 siteserver.vmdk
  -rw - 1 root root 847 29 August at 09:24 siteserver.vmsd
  -rwxr-xr-x 1 root root 1894-29 August at 09:24 siteserver.vmx
  -rw - 1 root root 265 June 3, 2010 siteserver.vmxf
  -rw - r - r - 1 root root 136146 29 August at 08:47 vmware - 0.log
  -rw - r - r - 1 root root 22071 Aug 4 12:54 vmware - 1.log
  -rw - r - r - 1 root root 17245 25 July 00:54 vmware - 2.log
  -rw - r - r - 1 root root 16997 25 July 00:49 vmware - 3.log
  -rw - r - r - 1 root root 0 25 July 00:45 vmware - 4.log

  
  -rw - r - r - 1 root root 16712 25 July 00:42 vmware - 5.log
  -rw - r - r - 1 root root 58064 29 August at 09:25 vmware.log

  Yes. The reason why you need to take another cliché is only in order to activate the clear all"" button. Because we don't need the memory, you can take the snapshot without it.

  André

• Prompt to save the .cfm file when you browse it

  I recently installed ColdFusion 8 and after many adventures, I am the administrator to come. However, when I navigate to a page .cfm elsewhere, I am invited by the browser to save the file. I deleted and added the connection JRun using the Web Server Configuration tool and .cfc and .cfm and .cfml are in Application from IIS mappings (C:\ColdFusion8\runtime\lib\wsconfig\2\jrun.dll). Can someone tell me what I should do next to fix the problem?
  
  Thanks in advance.
  Erik

  The challenge was to remove and then re-add the application mapping for .cfm, .cfc, .cfml in IIS, .cfswf

• Help with the older file types

  Technical question for all my fellow Mac geeks. I am trying to open Zip OLD files. Here is a picture of the gadget that back, we then used to store their and a screen shot of what the files as now when I open the drive of the back then. When I try to open these files, I get a message saying that Photoshop can not open them because it does not recognize the file type.

  Anyone have any ideas? Is there a way to get around this? Alternatively, where I could ask about it?

  Thank you.

  Do not post the same question multiple times. There is no that confuse everyone.

  I asked the host removes the duplicates.

• Help displaying the png files that require a picture scroll/zoom and sufficient quality.

  We try to bring a very simple application to android/iphone to blackberry.  The app is simply a tool that allows the user to navigate and view files png which are pages in a reference manual.  On iphone/android, we used the webviewer to view images.  The images range from 500 to 900 1500 x 900 x.  Everything works fine on android/iphone. We tried the same thing on the blackberry (curve, storm, torch: 5.0, 6.0), but the Blackberry BrowserField does not scroll horizontally when the image is zoomed.  We also tried to use ZoomScreen, but the image quality is so poor that the manual pages are unreadable.

  Anyone has a suggestion for how we can achieve a functional viewer of these images which allows Zoom/scroll and provides a good readable image quality?

  Dave

  Welcome to the forums!

  When you create the screen to which you add your images, you use all the constants style? What type of screen you are using?

  The reason why I ask, is that you seem to use screen which, by default, scroll vertically but not horizontally. To remedy this situation, create it like this:

  Display myScreen = new MainScreen(VERTICAL_SCROLL |) HORIZONTAL_SCROLL);

  or, if extend you it, put something like this as the first line of your screen manufacturer custom:

  Super(VERTICAL_SCROLL |) HORIZONTAL_SCROLL);