Prompt to save the .cfm file when you browse it

Similar Questions

• How to avoid changes to the NEF file when you use Camera Raw?

  He does not have to happen, but now, when I edit a NAVE in Camera RAW file, then save it as jpg in PS6 file NAVE is also changed, so I can't undo my changes here.  How to stop this change to the NEF file?

  And if you use the bridge to eliminate all changes in the NEF file you made in ACR and return to its state choose Edition > develop settings > clear settings. (You'll notice that the marker of this image in Bridge has been removed, confirming the fact that the NAVE is back to change.)

  

• How can I maintain the original size of the JPEG file when you import into Photoss?

  I noticed that when I use pictures to import images from the SD card in the camera, the images are substantially smaller than when I drag the same image directly from the SD card on the desktop. In general, a 3.6 Mb picture somehow diminishes to about 2.6 MB. I'm wrong and get frustrated to this drop in image quality!

  Any help / advice will be highly appreciated. Thank you

  In what circumstances you see this small size?

  Photos did a bit of copy bit when importing images in its library.  If you drag the thumbnail of an image on the desktop you bet that the preview version, which will have a small file size.

  Export the image on the desktop via the file export Export X Unmodified Originals ➙ ➙ menu option will give you the full size file that was imported into the library.

  Drag the thumbnail on the desktop will get you the original file.

  

• FTP creates and deletes the temporary instead of the download file when you use the switch S:

  We use Windows 2008. There is a strange problem to start the FTP., receive a file.
  I can receive the file when the command line GET command. When I use the file with the command (ftp - s:Filewithcommands.txt), ftp creates a temporary file and remove it automatically without doing the real download.
  Thanks in advance

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/winserverDS/threads

• Bridge will not open the NEF files, when you double-click on them, using PS CC

  I installed the latest version of PS CC and the bridge, but when I go to my Nikon NEF files and double-click it to open, they open in some weird Photo Gallery of the window, then I went Bridge preferences and reset settings, and now when you double click it nothing happens and they open at all.  I use a PC with Windows 7.

  I posted this question before, I need help, please

  If you go into Bridge preferences > File Type Associations, it does the default list?

  If it does not list Adobe Photoshop CC you can use the Browse button to

  the Photoshop.exe in C:\Program Files\Adobe\Adobe Photoshop CC

  

• Satellite U840 - goes on the mode 'sleep' when you browse the internet

  Hi, I bought one of the Toshiba U840 nine ultrabook.

  Something is really wrong with these machines;
  While I surf the net, actually when I type something portable past suddenly on the mode 'sleep'? Any idea what is wrong with him?

  The bottom line is; I bought a similar machine in the shop and I went back as a defective machine, they replaced for me with the same model but this computer has a strange problem!

  Suggestions, please?

  If you plug the adapter still does?

  Or maybe you're pressing the function key suspended above the keyboard or by pressing the power button?

• How to save the data to the new file, when you press the button

  Hello.

  Run a program that reads data recorders seconds and displays a trace on the screen.

  What I want, is that when I press a button, the program will ask for a file name and begins to record data to the file, and continues to do this as long as the button is pressed.

  When I press the button again, the program asks the name of the file again, so I can select a new file to write.

  I've included a simplified version of my program that works by asking the file name at the beginning.

  How can I change the program it starts a new file every time that the key again.

  Kai,

  I changed the example that I gave you to LV8.0, but I have never used the option 'Save for the previous version' before, so I don't know if it will work.

  I have combined the start and stop of recording in a single button (just change the text to all what you need) and I used the 'value' property to pass the path between cases. The path can be formatted as you have in your version, don't forget to use the string conversion function filepath.

  Just in case where it doesn't work on your version of LV I've attached a screenshot of the block diagram.

  Hope this helps, let me know if you have more problems with this.

  Easy.

  Darren.

• How can I disable the function that copies the image files when you drag the mouse?

  When I go to my image files and I hold down the Ctlr key and highlight a series of photos to remove, I sometimes inadvertently made my mouse to other photos and cause a series of copies to reach. He is a frequent source of frustration. How can disable this feature of "copy"?

  When I go to my image files and I hold down the Ctlr key and highlight a series of photos to remove, I sometimes inadvertently made my mouse to other photos and cause a series of copies to reach. He is a frequent source of frustration. How can disable this feature of "copy"?

  =============================================
  If you are comfortable editing the registry, the
  more info can be your solution.

  I do not have an article with the specific steps
  Windows 7, but the following link should provide
  enough information to help you improve the issue.

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  Trouble fixing: stop Windows copy
  Files accidentally when Ctrl-click selecting
  http://www.howtogeek.com/HOWTO/Windows-Vista/fixing-annoyances-stop-Windows-from-copying-files-accidentally-when-CTRL-click-selecting/

  Changing the default value in the following keys
  from 4 to 20 is supposed to improve the problem.

  HKEY_CURRENT_USER\Control Panel\Desktop\DragHeight
  HKEY_CURRENT_USER\Control Panel\Desktop\DragWidth

• Problem with the psd file when you export a hi res PDF

  Someone has had problems when recording a hi res PDF on X 1 parameters? I have a .psd file in my indesign file and it will create a sort of cliping mask when I export. The image turns white. This only happens when recording as hi res. Low resolution no or (smaller file). Does anyone have one advice that could help? I use Indesign CS6.

  Here is a screenshot: https://ImageShack.us/scaled/large/221/screenshot20130513at102.PNG

  http://InDesignSecrets.com/eliminating-the-white-box-effect.php

  Bob

• Anyone know if you can use FTP, when you save, just save the selected file and not all images and cs

  Someone knows If you can use FTP, When you save , just Save the selected file and not all the images et CSS includes ...

  What?  Can you please rephrase your question in order to understand what you're asking?

  If you ask how a file on the remote site via FTP without FTPing any dependent files?  That the answer is Yes, you can do this by changing the SITE > dependent files: option in the PREFERENCES to enable the option "prompt on put/check-in."  The next time you download a file, you will be asked if you want to also download dependent files.  If you say NO and check the don't ask again option, then you will always simply load the file and not the dependents. You can change it back at any time by changing the preferences of this setting.

• Crashes when you save the eps file

  Don't know how to solve this problem. Saw the comments on changing the time zone, but I can't seem to find where to change this setting (within AI? or are they referring to my computer settings?) Have also tried to install the new Adobe CC 2014, but even that one goes down. Also, I rebooted the computer, but it's always the same problem.

  Thanks for any help.

  Try to "Place" instead of "Import".psd files  When you place the images, you have the possibility to link the files and then again when you save as > EPS.  You have probably inadvertently incorporated the .psd files.  The right method of importing image files using the file > place command.

• Is it possible when you save the psd file to put an automatic jpg file saved at the same time?

  My job is to prepare images for print viewers and window facilities.  My clients need to approve in advance the photos before printing.

  I generally save my psd files, but because the files are very large in this format I usually save another copy in a jpg file which has a much smaller file size.  This makes it possible for me to add to a presentation and and send them to my client.

  Is possible when you save the psd file to put an automatic jpg file saved at the same time?  Or that I always have to do it manually?

  Use the Image Processor in Photoshop or install the free Dr. Brown Services.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• Possible to force overwriting of files when you use the method. render()?

  Hello world

  Hope all are well.  I looked at the documentation available in the Guide scripts of the effects after, but could not find any information on this.  Is it possible to force overwriting of files when you call a rendering method. render() in a script?  I know there is a constant that can be used to force overwriting of .aep project files when you use the method. close() on the app object.  For example, it's documentation:

  Action to run on close. A CloseOptions enumerated value, one of:

  CloseOptions.DO_NOT_SAVE_CHANGES : Close without saving the changes. CloseOptions.PROMPT_TO_SAVE_CHANGES : Whether to save changes before closing.
  CloseOptions.SAVE_CHANGES : automatically record on the end.

  Is there something like this for managing conflicts of files during the rendering process?

  Thank you
  Arie

  That's what I do. It seems to work:

  app.beginSuppressDialogs ();

  myProject.renderQueue.render ();

  app.endSuppressDialogs (false);

  Dan