Help page about-60 update error needs

Similar Questions

• Need help resolution Windows 7 update error code 80242016 for update KB3185330 * IMPORTANT UPDATE

  I installed 5 updates to windows that have been brought to my attention.  4 5 updates were installed successfully.  But 1 updates that is marked "Important" CANNOT install.  The update is "KB3185330", it says it's an update to "October 2016 cumulative monthly security for Windows 7 x 64 based systems quality".  Can someone please help me to rectify this & this update installed successfully.  I never had problems before installing an update 'important '.  I am very concerned because I'm not a person tech savy, but I guess that if the update said '' significant '' than he SHOULD CERTAINLY be installed.  I kept all of my updates of Windows 7 since I got my computer.  I did NOT any changes to my computer before trying to update & as I said before, 4 other updates have been "successful".  I would appreciate the help of anyone who is well informed about it and can give me EASY instructions on what went wrong AND how to fix it.  Thank you in advance.

  Hello

  To address your concerns about the error message the update is not applicable to your computer , you can visit this link and follow the steps carefully.

  Let us know how it goes.

• 80080008 and Microsoft update errors 8024 A 000

  My update from Microsoft is not updated.  Windows 8.   He has performed in the past - computer not brand new.

  Luana salvation,

  For a better understanding of the issue, I would need more information on your side.

  1. The problem occurs with all Windows updates?
  2. Did you the latest changes on the changes on the computer before this problem?

  0x8024a000 error code could occur due to the interruption of the connection between your computer and the Windows Update service. Error code 0 x 80080008 could occur due to corrupted Windows Update components. Try the steps listed here and see if it helps:

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows Update error 0x8024a000
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-error-0x8024a000

  Note: Applies to Windows 8.

  Method 2:

  If the problem persists, I suggest you to reset Windows Update components and check if it helps.

  How to reset the Windows Update components?

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:

  See the article for more information.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  Note: Applies to Windows 8.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• HP OfficeJet Pro 8610: Windows Update error 80070490

  I received a Windows Update error 80070490 compared to the HP printer.  How to solve this?  What are the steps to take.

  Welcome to the HP Forums @ace8,

  I came across your post about Windows Update error "80070490" you received on your Windows Vista system and I wanted to respond to try to help.

  Here are two documents that I found on the Microsoft website on errors:

  1. Windows Update, error 0 x 80070490
  2. Windows Update error 80070490

  If there are problems with the printer features, let me know a description of the printer problems and I will do my best to help.

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,

• Cannot install Windows update, error: 80070490

  Original title: error 80070490

  Windows will not run updates.  Get error 80070490.  I've done all the troubleshooting that was proposed and nothing works.  Has anyone else got this specific error?

  Hello

  1. What are the troubleshooting steps you tried to solve the problem?

  2. What is the description the updates that are failed?

  I suggest you to follow the steps from the link below and check if it helps.

  Windows Update, error 80070490: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80070490

  Hope this information is useful.

• Cannot install KB2645640 via Windows Update. (error code 80073712)

  Original title: cannot install KB2645640.

  * error code added to title *.

  When you run Windows Update I'm unable to install KB2645640 with error code 80073712 marked.

  Hello

  I suggest you to follow the steps from the link and check if it helps.

  Windows Update error 80073712

• Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Question
  Sir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!

  Subject: House = without capital letters

• I've updated my pc from windows xp to windows 7 since then I can not get my headset & mic to work. I know very little about computers and I need someone to help me, please.

  I've updated my pc from windows xp to windows 7. Since that time my headset & mic do not work. I know very little about computers, so I need some help, please.

  Not all Windows XP PCs, or their hardware is compatible win7.

  Usually if the PC manufacturer, or the manufacturer of the motherboard so a generic desktop computer provides no specific drivers for win7, its does not work

• Windows update error 8000b 0100 need help serious

  I have a x83vb from asus with WinVista SP1 64-bit and every time I have try to launch an update that it gives me Windows update error 8000b 0100 and ive tried system, Ive update readiness tool used the fixit now normal and aggressive, ive run manual updates, ive used CMD promt to register the .dll files unsigned , ive tride performs updates without the firewall, and ive tride reinstallation of windows and make back to updates previous it is gettig really boring especialy because I can't even upgrade to vista Sp2 can someone help me please

  Hi Markuskain,

  Without the logs that TaurArian asked at the base only troubleshooting steps that we might suggest would be these two:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  http://support.Microsoft.com/kb/971058 (make sure of course when running this tool, you run it in aggressive mode)

• Serious manual Windows Update problem, need help

  Hello when you run the microsoft update in the start menu, I am now getting a totally different message, then I have before I've never had this problem before when I'm trying to update I get the error message "403 - Forbidden: access denied."
  You are not authorized to view this directory or page using the credentials you supplied. »

  I have automatic updates turned off that I prefer to manually update.

  This has happened only since I installed the microsoft security essentials, but I also got nod32 on my computer as I have now deleted these two and nothing will do, the problem persits, I decided just to install security essentials miccrosoft and I can't update as well as the exact message I get is as follows

  
  "" microsoft security essentials was not able to verify the defination of virus and spyware updates
  error code: 0 x 80004002

  "" error description: the microsoft security essentials was unable to download definition updates, because your computer uses an older version of the windows update client or becvause windows could not start the service that transfers data.

  I use 32 bit microsoft xp professional, sp3 installed with all the updates until about 3 weeks ago

  Any help would be appreciated!

  Thank you

  Please stay with your original thread on this subject: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/89a95d94-0257-4250-a6bc-cc1bf08802b2

  There are many more things that simply installing MSE.

  Thank you.

• Firefox 5 opens three legs to start: welcome Firefox to my home page and to update download helper 4.9.3 to 4.9.4. I put the browser from my home page and nothing else. How can I fix it?

  I want just a single tab with my home page at startup. After updating to Firefox 5, I can't get rid of the home page. After update to support download, I can't get rid of the tab saying I need to update to 4.9.3 4.9.4. I removed Download helper and reinstalled but still have the problem.

  See the following for a few suggestions:

  • https://support.Mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports several home pages separated by ' |' symbol
  • http://KB.mozillazine.org/Preferences_not_saved

• Don't know what updates I need through the center of update. And get the following error message popup every minute, wuauclt.exe.

  Please, I beg you, help me please I need this computer for my work and am already 1 day behind by logging into my company to do my job (I have Windows XP Version 2002 service pack 2)

  Not only can't update windows via the update enter but an error message continues to appear every minute that used to go.

  It says "wuauclt.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  If I click on th does not send or send error report this message keeps popping up. When I click the to see what data link, he said:

  "Error signature szAppName: wuauclt.exe szAppVer: 7.4.7600.226 szModName: szModVer esent.dll: 5.12600.2180 offset: 005d 424 '  Details of the declaration: this error report includes: observation information covers the status of wuauclt.exe when the problem occurred, the operating system version and used hardware and Protocol address Internet (IP) of your computer. etc, etc, etc.

  When I click on info tech I get

  Content error report the following files should be included in this error report: C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\wuauclt.exe.mdmp C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\appcompat.txt WER189a the number changes each time.

  So far, I ran McAfee, Microsoft Security Essentials and it keeps popping up. I still do not know what updates I need through the Update Center but could manually go and get service pack 3 by itself. I need to be able to use the center of update and do not have this message continues to flow upward.

  What I do?   Thank you so much Corina

  Hello

   

   

  Let us make the below listed methods and check if we still get the error message.

   

  Method 1.

  I would ask you to reset the Windows UPdate components and check if you still get this error message.

  Click the Fix It button in the article below to do it automatically or you can do it manually as wel. For more information, refer to the article below.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

   

   

  Method 2.
  If the error still persists please provide us with the error log:
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

   

  Method 3.

  I would also recommend to install the Windows Update Agent to manage the updates on your computer.

  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  
  Please let us know if this helps you resolve the problem or if assistance is needed.

  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Current solution: download IE8 for XP, run who, follow the Setup Wizard, wait for his failure. Download manually upgrade restart, recommended.

  Restart the installation of IE8, wait that he remove previous IE. Reset.

  Installation of IE8 restart to restart. Let it run. May need to restart.

  Try to run windows update again. IF it works, woot, otherwise download the SP3 of XP service pack from Microsoft. As the Windows update fails, you must not download an installer, but an ISO standard. Burn the ISO to a CD and install (way to go...) or download a free tool like 7Zip and unpack iso and install a go from there.

  From there on, the installation of SP3 and hope this works...

• I have 3 devices (obsolete drivers?). I read the help topic I got 3 errors in windows update

  I used uniblue freescan and suggested that my pilots have 3 devices that are outdated. (1) what was installed, was 6.0.6000.20080 for controllers realtek usb 2.0 card reader / universal serial bus. But he suggested that I update to 6.1.7600.30118

  (2) what was installed, was 7.6.0.108 for the atheros AR9281 wireless network adapter. But he suggested that I update to 7.7.0.449

  (3) what was installed has been 6.205.403.2008 for the realtek RTL8102E Family (NICs PCI-E Fast Ethernet NIC NDIS 6.0) But he suggested that I update to 6.243.1025.2010

  I also used the windows help and Support for details how to update the registry, and he also exclaims that I have a Windows update error: 8024001F and 8000FFFF and also 80070646 or 646

  I'm not savvy computer very, but if I show a procedure step by step details on how to repair or fix the problem. I'll certainly try to learn and understand how to accomplish this detailed information. I hope that I gave a lot of information that my problem may be or if he is in at all? Your help will be very appreciated. Thank you

  Given that you are willing to learn, to stop using the free scans of the internet, you will get your computer in trouble later. If your devices perform very well there is no reason to change drivers. However, if you feel a need for your devices performs better go to your computer manufacturer and check if updates are available. Also, forget not, everything simply because you change a driver does not mean your device will be more efficient. In most cases updated drivers will have little or no significant effect and can even run poorly. If you want to learn how to install a driver, download a driver, then follow the instructions, it is a fairly easy task. If you later want to restore the previous driver, it is also a fairly easy task and we can help you here.  Windows Update error 8024001F means you have lost your connection to the internet when checking for updates to fo, you can ignore it. Update Error 8000FFFF is a registry key, do not mess with the registry at this point, go here to fix it.     http://support.Microsoft.com/kb/946414 update error 80070646 is a registry key, go here to solve this http://windows.microsoft.com/en-gb/windows7/Windows-Update-error-80070646-or-646 I see you already know these fixes of your post. It is only by mistake that human beings humans learn how to do things, curiosity , and the desire.

• ﷯Error: could not generate code to activate one or several web fonts on the page "about". [Error 500]

  Hi all

  I get this error message when I try to upload my site on an FTP server: ﷯Error: could not generate code to activate one or several web fonts on the page "about". [Error 500]

  What is the solution?

  This is the temp on BusinessCatalyst site 4 Seasons Air Care.

  Thank you

  Melissa

  It worked:

  
  

  09:26 good response from Zak Williamson (Adobe) on November 4, 2015

  The original bug that triggered this error for many customers from mid-2015 to mid-September has been fixed by an update of CCLibraries, who was part of an update of the Creative Cloud Desktop application that went live in mid September 2015. Since that time, there are still some customers encounter this error. In these cases, the cause appears to be a mismatch in the State of the connection between Muse, Typekit, and Creative Cloud Desktop app.

  To correct this discrepancy, please follow these steps:

  (1) abandonment muse

  (2) go to the designer Cloud Desktop app and disconnection of preferences (it's in a menu of the gear icon).

  (3) leave the creative cloud office.

  (4) restart creative Cloud Desktop.

  (5) sign.

  (6) revive the Muse.

  At this point, you should be able to publish, upload, etc and your Typekit fonts should work without errors.