HELP-PC DOES NOT START. MODEL S5268hk, SLIMLINE

Similar Questions

• Need help! Does not start. Only get '_' in the upper left corner.

  Hi, have the following computer:

  HP-Pavilion model: KZ849AV-ABA s3500Z

  Running: win 8.1 (32B) 2G ram

  Have not had any problems I know, so far.

  Run norton regularly, no problem.

  Stop the machine to get out.  Returned, tuned back on and now will not start.

  It lights up, passes in front of the screen for "F9" "F11", etc.

  Then crashes on startup with a single "_" in the upper left corner.

  No beeps or error messages.

  Have you tried several attempts to diff power off, unplug, etc..  Same results.

  Have tried to interrupt the boot to make "diags", see the boot menu.  Everything seems fine, from what I can tell.

  Don't know what else to do.

  As mentioned, saw no problem before that to my knowledge.

  It helps the tight connections and no keyboard activity.

  Possible victory 8.1 automatic update when the last stop arrived.

  Recovery disks, I did several months ago when I upgraded to OS to win 8.1

  But I don't want to go down that path and reload everything.

  Any ideas how to check the boot sectors, chkdsk, etc.. ???

  Thanks in advance,

  Hi guys, thanks for all your comments.

  I managed to understand.

  I used the 'flash' player who made victory - 8.1 you create during the installation of win - 8.1 fresh.

  It's like a recovery disk.

  I started off of him and was able to use Diagnostics out of it to check the hard drive.

  He said it was to fix hard drive errors, then restarted.  Got the same new cursor. Then run this process again.

  Got mesg diff on the correction of hard disk errors, please wait.

  It restarted again and is came fine.

  Several reboots confirm the problem disappeared.

  I think that probably the hard drive boot sector becomes corrupted.

  I'll keep and eye to it and document, we had this problem with the machine.

  Will chose to replace the hard drive or buy a new machine.  Which ever option the woman wants to take (his machine).

  Thanks for your comments.

  PS You forgot to mention that I disassembled the machine and cleaned carefully.  Back together and restart with the same problem.  Then I did the above stuff.

• Need help: Reader does not start, the message error "attempt to access an address not valid."

  My previous installation of the drive (Windows 7, 32 bit) worked without any problems.  Until a few days ago when I updated to the latest CD player.  Installation worked fine, but when you try to start the CD player, I received the following error message: "attempt to access an address not valid."  I uninstalled CD and installed Player 11.0.  Yet once, installation worked fine, but I get the same error message, even if double click directly the Adobe Reader .exe file.

  A similar question was asked in December 2014, but I do not see a resolution.

  Without Adobe Reader, many applications simply do not work.  Any help would be appreciated.

  

  Thank you, Christopher, but this thread did not provide the right answer to my situation.  However, I continued working on my problem and finally found the solution: it's software Msreader EMET let go.  This software is an absolute disaster.  This is a free Microsoft security software. It's great, but once installed on your system, you cannot uninstall it even more.  After an EMET update a few months ago, I could not start Microsoft Word program.  After hours of play and even communicate with their support (not), I finally understood that he was own EMET software Microsoft blocks the Word Microsoft to start program.  Apparently, these guys don't know what they are doing.

  Anyway, I was ready to uninstall and reinstall the drive again, this time using the cleaner of Adobe's Acrobat Reader software to remove all possible traces of before install.  Before I did that, I remembered the EMET disaster a few months opened EMET, unmarked all actions AcroRd32.exe, and voila, launched reader and let me not open PDF files. (I had to reboot my PC before that worked).  Player is then proposed to upgrade to the latest version.  I did, and big surprise, Reader produces the same error message after the update.  Heck!  But after another reboot, the drive launched without any problem (apparently, EMET for the additional restart to recognize the changes after the update).

  I lost the greater part of the day to work on this issue, but I'm a happy camper again, because my Acrobat Reader works again.  Maybe my experience will help someone else.

• Please help computer does not start!

  Hello, I need desperate help! When I try to start my computer, it starts work and then comes to the screen below. I tried to start it in safe mode and others, but this screen keeps coming back. Please help, how can I get rid of him?  The screen is bright blue with white writing and said.  A problem has been detected a windows has shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME so he says a lot of stuff on the verification of the material and at the bottom it said technical information: * STOP: 0x000000ED (0x89D35900, 0x00000000, 0xC000009C, 0x00000000) Please help me! I can't get my computer to start so I have a lot of data out there I'm desperate to get. Thanks, kate

  Hi KateStapleton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  See the Microsoft article below and try the steps mentioned, check if it helps.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  http://support.Microsoft.com/kb/297185

• my windows firewall does not start and I get a erroe code 5, can someone help me

  my windows firewall does not start and I get a erroe code 5, can someone help me

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

  Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

  Method 2.

  Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

• iMovie does not start! Please help me...

  Hello

  iMovie 10 does not start when I run the application it!

  iMovie start for a few seconds, trying to backup previous library and then crash...

  Please help me because I don't want to lose all my projects!

  Thank you for the support.

  Cheers to the Italy.

  Here's the message log:

  25/07/16 20:38:19, iMovie 957 [4230]: warning: the selector Gestalt gestaltSystemVersion returns 10.9.6 instead of 10.11.6. This isn't a bug in Gestalt - it is a documented restriction. The NSProcessInfo operatingSystemVersion property to get the correct version number of system.

  Location of the call:

  25/07/16 20:38:19, iMovie 958 [4230]: 0 0x00007fff938d76df ___Gestalt_SystemVersion_block_invoke + 113 CarbonCore

  25/07/16 20:38:19, iMovie 958 [4230]: 1 libdispatch.dylib 0x00007fff892a140b _dispatch_client_callout + 8

  25/07/16 20:38:19, iMovie 958 [4230]: 2 libdispatch.dylib 0x00007fff892a1303 dispatch_once_f + 67

  25/07/16 20:38:19, iMovie 958 [4230]: 3 0x00007fff93863fbc _Gestalt_SystemVersion + 987 CarbonCore

  25/07/16 20:38:19, iMovie 958 [4230]: 4 CarbonCore 0x00007fff938637d0 Gestalt + 139

  25/07/16 20:38:19, iMovie 958 [4230]: AVCHD 5 0x000000012ca6402d _ZN13FDVDProcessor12FCDVDManagerC2Ev + 141

  25/07/16 20:38:19, iMovie 958 [4230]: AVCHD 6 0x000000012ca69ab7 _ZN13FDVDProcessor12FCDVDManager13GetDVDManagerEhhPFvvE + 87

  25/07/16 20:38:36, iMovie 015 [4230]: ERROR: could not allocate class object (null) - return nil (file: /Library/Caches/com.apple.xbs/Sources/DeepSkyLite/DeepSkyLite-28072.7.78/Framew ork/DSBridge.mm, line: 7612)

  25/07/16 20:38:36, 078 diagnosticd [127]: error assessment process info - pid: 4230, puniqueid: 4230

  25/07/16 20:38:36, 080 InternalFiltersXPC [4231]: host connection < NSXPCConnection: 0x7f85b350f2a0 > invalidated connection from pid 4230

  25/07/16 20:38:36, com.apple.xpc.launchd [1 114]: (com.apple.iMovieApp.64352 [4230]) Service was released due to the signal: Abort trap: 6

  25/07/16 20:38:36, com.apple.xpc.launchd [1 143]: (com.apple.ReportCrash [4236]) endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.ReportCrash

  25/07/16 20:38:38, ReportCrash 831 [4236]: report of incidents recorded for iMovie [4230] version 10.1.2 (283259) to Users/iMaclittlegiop/Library/Logs/DiagnosticReports/iMovie_2016-07-25-203838_i Mac-Littlegiop - Home.crash

  25/07/16 20:38:38, 889 ReportCrash [4236]: AutoSubmitPreference is 0

  25/07/16 20:38:39, UserNotificationCenter 012 [4238]: * ATTENTION: the method in the class userSpaceScaleFactor NSWindow is discouraged on 10.7 and later versions. It should not be used in new applications. Use convertRectToBacking: instead.

  Launch iMovie by holding down the option key and see if you can create a new library. If Yes, then add clips to the timeline and see if iMovie works ok.

• 2006 iMac does not start. Help restore

  I have an Intel iMac core duo with iSight and built in disk drive around 2006. It does not start.

  When I turn on, it sounds and passes to the gray screen with the apple logo and a progress bar or a spinning wheel. Then he stops down. I tried all the troubleshooting and nothing works. In addition, I don't have the disks that originally from cane with the computer. So I can't make a diagnosis of the hardware. (Unless someone is willing to sell me their album hehe).

  This problem happened to me in 2012. I had a friend restore the computer to empty the hard disk, then boot from the snow leopard disc and reinstall everything. It worked like a charm.

  In 2013, a disc is stuck in the drive. I have troubleshooted only and nothing has worked. I assumed that the drive is dead and has continued to use the computer without worrying about that. Then, in 2014 someday when I restarted, the disk jumped! I never tested the drive then because I was afraid of another stuck disc. Then, the computer is dead again as he did in 2012.

  SO I know what to do. I need to wipe the hard drive and start over. However, I didn't have a drive. So, I bought one on eBay. When I insert it, the computer enters the disc. I can hear the mechanics works. It ejects even properly. However, I can't boot from the drive. When I start the iMac by pressing option, I don't see the Macintosh, no disk drive.

  My hard drive died? If so, a USB dvd drive would work? If USB does not work, how can I replace the drive?

  Is it possible that I bought a drive bad or fake software and that's why I can't boot from the dad?

  Please help in some way!

  Try a boot sure try safe mode if your Mac does not end commissioning - Apple Support

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• MacBook does not start without warning, please help I'm losing my mind

  MacBook pro froze performs a simple operation. Got the wheel turns and could not enter the finder, etc. Did a hard reboot. Now the computer does not start. I get the apple journal and the bar for a minute or two and then a zero symbol IE forbidden - a circle with a line through it.

  Surprisingly, it is less than two months after a similar disaster where the computer would not suddenly start. In this case, I was able to get repaired the program apple logic board (the problem was compatible with the congenital fail GPU result).

  Incredibly this time the macbook seems to be in even worse shape. I don't get anything useful from the startup keys.

  cmd R - take me in a gray screen no symbol

  D - no symbol grey screen

  option D - it took a while but eventually I got to choose the network, then it seemed to freeze on the globe

  option - strangely this brings me to a screen asking me to choose the wireless network, but it does not all networks in the box. weird - this happens even with a simple bootable usb key

  option cmd R - annoys me to the world, but the world does not revolve

  T - puts me the screen of the target disk, but the disk is unreadable from another computer

  cmd S / cmd V - gives me a code screen and then freezes

  Shift - takes me to zero cross again

  C - think for awhile, but let me on an undefined gray screen

  (I need some advice on the start-up of the thumb. Pressing C should force the startup of the thumb. I did an inch bootable with el capitan. However, I am not convinced that my thumb works on a functional mac either - I just can't get a macbook functional 2009 to start the boost by pressing C, although it starts from the thumb if I press option and go through the menu. Weird.)

  Help, please. Urgent need to use the computer and access the data on it.

  Even if you have just a few ideas that would be useful.

  Can I assume that you have a 2009 MBP?

  You have your data backed up?

  Have you tried SMC and NVRAM resets?

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Have you tried a secure boot?

  https://support.Apple.com/en-us/HT201262

  Take our installation disc and use the one with the Apple Hardware Test instructions on it and run the original test.

  Note that an error free AHT is inconclusive.

  Ciao

• ix4 - 300 d does not start after factory reset and clear disk - HELP!

  Hi all

  I did a rest from the factory of my ix4 - 300 d. Sellected the quick erase option.

  He is now hooked up with "lenovo" on the screen.

  I've tried so far:

  remove all disks

  No network cable

  RESET button on the back (5 to 20 seconds)

  and a lot of power cable in and out

  removed the battery on the Board for 30 minutes...

  Help...!

  Hello VizBiz,

  If you have tried to start with all the removed drives and NAS does not start, I recommend to contact local support and asking an imager:
  https://Lenovo-AP-en.custhelp.com/app/answers/detail/A_ID/18133/session/L3RpbWUvMTM2NjU5MDgxMS9zaWQv...

• HP Pavilion p6-2054uk: HP Pavilion p6-2054uk does not start all of a sudden upward. Help, please.

  I hope someone can help here?

  I have a desktop HP Pavilion p6-2054uk (Windows 7 64 bit - i5, 3.00 Ghz - 6 GB of RAM) that I bought in 2012 and especially use of HP products.

  By starting my PC the other day, it will not start and crashes on the HP splash screen. When you press ESC, F10 and F1 and F8, it simply changes the screen to a black screen with 7 lines of text giving the details of my PC base on this subject. It should give me other optins at this stage, but does not work.

  The HP Pavilion p6-2054uk hard drive does not start even another hard drive OS I've tried from another computer with Windows 7 64 bit on it. Troubleshooting a few others, I even tried a fresh new hard drive in it with a new copy of Windows 7 64 bit to install into the CD Rom and it will not yet go through the HP start - that is abnormal screen since usually, it detects the Windows CD and install. Furthermore, fans in the PC work normal, as the eject the power of the PC CD ROM light is on too. I tried all the three available inside power cables and tried diferent nine cables sata/data and another monitor entry too, all to nothing done.

  The hard drive that was in the HP Pavilion p6-2054uk when he stopped to start up is fully accessible when placed in the other machine I have. Therefore, it is still operational.

  The notable thing only I did in the days before it were installing Adobe Creative Suite 6 but I do not think that it would cause a major problem like this, noting also that another hard disk OS (without Creative Suite 6 is installed) and a new facility wouldn't start either. Therefore, I am afraid a harware issue any.

  What could be going on here?

  Side for the second or 2 of optimism about the usual boot the PC normally makes noises, it looks like he died immediately after, suspended on the HP screen.

  Thanks in advance.

  R.

  Hi there @dougaljoe,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start and it is indeed suspended at the HP logo even with a different hard disk (with configured operating system) installed. I'm happy to help you with this.

  I suggest that you perform all hardware diagnostics in the BIOS/UEFI. Please also refer to the following, as it covers a range of start-up problems, and if you follow the symptoms you experience should be useful. It includes information on diagnosis.  Computers HP - computer won't start (Windows 7)

  According to you it might just be something easily replaceable, or something more simple to set, or in a worst case something requiring maintenance. If the worst case rears its ugly head, then try a hotline. Please use the following http://www.hp.com/contacthp and create a folder for your question and call HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html If all goes well, he will not come to that, but it is preferable to have the information if necessary.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  Hello

  1. what happens when you try to start the game?
  2. do you have messages or error codes?

  Follow the steps in the article mentioned below and check if this solves the problem.

  Known graphics issues in Rise of Nations
  http://support.Microsoft.com/kb/820089

• Please help: Windows XP does not start error message: STOP: 0 x 00000024

  Original title: Please help: Windows XP does not start.

  Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

  If this is the message you get, then you have multiple problems...

  1, xp should be on the C: drive, not F:

  Default C: is for the OS only. With xp on drive F: and you use only a hd

  then the hd must be formatted and all partitions deletion (unless there is a relocation

  the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

  be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

  for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

  Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

  Read kb307654 or kb314058

• Windows xp help does not start - unmountable boot volume and recovery console work ethier

  Original title: windows xp help does not start and the recovery console will not work ethier

  the symptoms are used to my windows XP boot it says unmountable boot volume, so I tried to fix it via the recovery console as everyone says but every time I enter fixboot for one of my drives hard /i have 3 I think / it won't work and says unidentified boss so I create another boot and exit area and it does not work so I go back and try fixboot again and it says unknown again after the creation of we know. Same mistakes for chkdsk /r and /p never tried / f but I'm guessing that it won't work ethier. It's like my recovery console won't save the changes it brings to all of my discs hard does anyone have an answer to this

  Hello
  • Will there be any changes made before the show?
  • Did you try to start in safe mode?
   
  You can check these links:
   
  Unmountable Boot Volume
  http://support.Microsoft.com/kb/555302
   
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
   
  If above does not work, I would say to contact the manufacturer of your computer.
   

• HP-gs61-110sa: help! laptop does not start

  Help, please! Laptop does not start. Looking at the black screen with cursor flashing at the top left.

  Hello

  If you do not, use another PC to create a Windows 7 repair CD.  Download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD ( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the CD to repair.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the CD from repair and try to restart the laptop.

  Kind regards

  DP - K