ix4 - 300 d does not start after factory reset and clear disk - HELP!

Similar Questions

• Equium does not start after Exchange VGA and motherboard

  Greetings.
  I have a satellite that were replaced VGA & mainboard, but it does not start. There power correctly and power & switch are turned on but there is no image on the LCD or external. HDD led flashes but nothing more.

  I tried a different CPU and RAM modules.

  In other threads with similar problems seems to be a problem with the screws but I tried to remove all the, winding or change.

  Im stuck with this and have need of any kind of help.

  Thank you

  Try this:
  Remove the battery and the AC adapter, wait up to an hour, plug in the battery and the AC adapter and try again to restart the laptop.

  In my opinion, a problem with the motherboard. The new mother is maybe defective.
  You have replaced parts by yourself?

• Windows Vista Home Premium does not start after mother, CPU and RAM upgrade card

  I recently updated my PC Windows Vista Home Premium. I changed the motherboard, CPU, RAM and video card. When I booted the machine, it has not started Windows. Windows tried to recover, but could not. Is it possible to get this machine to start without doing a new install? The new facility will lose important files.

  Hello

  It's a normal reaction after replacing the hardware that you have replaced.

  The hard drive with the installed operating system contains the old motherboard drivers, etc..

  They must be replaced with the new motherboard, drivers etc.

  You will need to reinstall the operating system and then install the new drivers of motherboard (you should have a diskette of drivers for it), if the new installation does not probably them, that it will not...

  To backup your data > buy a hard drive USB enclosure > put your hard drive in it > plug it into another computer > read and copy your data from it in this way.

  See you soon.

• Cisco 7931 G do not start after factory reset

  Hello world

  So, I came across a problem that I hit an absolute impasse. I will list it first, then I will follow it with various methods, I tried to solve it.

  The phone in question is a 7931G, I can't tell you what software to boot, he's trying to boot from because it does not go far enough in the boot, treat for me to say. I did the factory reset as recommended by the documentation: give power to the phone (in my case through PoE on a UC540), press and hold the ' # ' until the side buttons are flashing turn upward. At this point, press the 1-2-3-4-5-6-7-8-9-*-0-# keys and wait until the course ends. The UC540 was active DHCP, all of the latest software on it (Sogiciel 8.6) and tftp-server was operational as well.

  What's happening: the phone starts the boot process and go to the screen that says "Update"... "and then, quickly, it flashes on the screen that she asked ' term31.default.loads... 0% "and then it starts to boot (Cisco logo appears)." On the bottom left where it usually shows a box with a check mark, it now shows a full circle in a slightly larger circle. He sat at the splash screen for about 2 minutes, stop and try to move on once more.

  I do not know what boot image he used before the factory reset, but this time around his supposed to pull the image of "SCCP31.9 - 1 - 1SR1S.loads. I read in a separate thread support the first 7931 must be upgraded to "SCCP31.8 - 5-4 S .loads" before he can start from 9.x software. So I tftp had the entire folder 7931 Sogiciel 8.2 UC540 to the UC540. I created the entries of the tftp server and alias and set the 7931 load newly downloaded software. Nothing. (The newly downloaded had the corresponding term31.default.loads of the file that was pointed toward the 8.5.4 files).

  I rolled back the UC540 everything back to 8.2 Sogiciel, with all the default configurations. Connected to an another phone 7931 (currently logged in as my personal and registered phone CUCM), than the phone registered car very well. I assigned it lines, performed test calls and all of the features worked as expected. 7931 issues, however, remained with the same problems.

  I tried to connect the problematic 7931 to CUCM of office, but the problem has prevailed without worrying what port I used.

  Any ideas or suggestions would be greatly appreciated. My goal here is to get the phone to properly initialize and eventually to register with the UC540.

  Thank you

  Andrei.

  EDIT: addition of debugs for tftp

  001095: 2 August 22:19:45.928: % LINK-3-UPDOWN: Interface FastEthernet0/1/1, changed State to

  001096: 2 August 22:19:46.928: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1/1, changed State to

  001097: 2 August 22:19:52.400: TFTP: application server port 49152, socket_id 0 87903524 process 160 x

  001098: 2 August 22:19:52.400: TFTP: read the 10.1.1.11 host demand (49152) via BVI100

  001099: 2 August 22:19:52.400: TFTP: looking for term31.default.loads

  001100: 2 August 22:19:52.400: TFTP: open flash:/phones/7931/term31.default.loads, fd 3, size 655 to process 160

  001101: 2 August 22:19:52.404: TFTP: sending of block 1 (retry 0), socket_id 0 x 87903524

  001102: 2 August 22:19:52.404: TFTP: ACK received for block 1, socket_id 0 x 87903524

  001103: 2 August 22:19:52.408: TFTP: sending of block 2 (retry 0), socket_id 0 x 87903524

  001104: 2 August 22:19:52.408: TFTP: ACK received for block 2, socket_id 0 x 87903524

  001105: 2 August 22:19:52.408: TFTP: finished flash:/phones/7931/term31.default.loads, 00:00:00 time process 160

  001106: 2 August 22:19:53.040: TFTP: application server port 49153, socket_id 0x86A5CB70 process 160

  001107: 2 August 22:19:53.040: TFTP: read the 10.1.1.11 host demand (49153) via BVI100

  001108: 2 August 22:19:53.040: TFTP: looking for term31.default.loads

  001109: 2 August 22:19:53.040: TFTP: open flash:/phones/7931/term31.default.loads, fd 3, size 655 to process 160

  001110: 2 August 22:19:53.040: TFTP: sending of block 1 (retry 0), socket_id 0x86A5CB70

  001111: 2 August 22:19:53.044: TFTP: ACK received for block 1, socket_id 0x86A5CB70

  001112: 2 August 22:19:53.044: TFTP: sending of block 2 (retry 0), socket_id 0x86A5CB70

  001113: 2 August 22:19:53.044: TFTP: ACK received for block 2, socket_id 0x86A5CB70

  001114: 2 August 22:19:53.048: TFTP: finished flash:/phones/7931/term31.default.loads, 00:00:00 time process 160

  001115: 2 August 22:22:01.788: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1/1, changed state down

  Try to restore to 8.5.2 or 8.4.4.

• Re: Satellite Pro A210, stil does not start after you use the recovery disk

  Hi, my computer laptop girls stopped booting, I tried everything to fix this, but it seems to be on a loop.

  He runs the repair of your computer, but after a while, I get the message, this computer cannot repair this fault automatically (or something similar), there is also a message that says - if you have connected a camera or to this computer's portable music player, remove it now and restart.

  I tried to start in safe mode, safe mode with command prompt and last know good configuration but still no joy, so I eventually ran the recovery disc. Once it was finished, I was to square.

  Does anyone have an idea of what I can try next - other than to throw it out the nearest window.

  Thanks in advance.

  Hello

  Never heard talk of this error but sounds strange
  If I understood your first assignment; you were able to complete the installation of the OS from the recovery disc. Is this good?

  Well, in this case the HARD disk must be OK because the files were copied correctly

  I searched a bit in google and didn t have found a solution to 100%.
  Some have said that new OS install should solve this perhaps you could use clean up Windows Vista, Win XP disk

  You can also try to format the drive HARD integer first. Delete all partitions on the HARD drive, and then try again

  PS: You can check the HARD drive using the + Hitachi Drive Fitness Test. +
  Its free tool. You can find using google

• El Capitan does not start after a freeze and a forced, bonded stop on the gray screen

  Hi all

  I have a MacBook Pro 17 "late 2011, 2.4 Ghz, 16 GB RAM with OS X El Capitan installed, the latest version with all the updates." A year ago, I've had my Toshiba HDD replaced by Samsung SSD 250 GB SATA III 850 EVO and the Toshiba disk has been moved to CD using LMP disk Doubler Bay, at the same time, I had my RAM went from 8 GB to 16 GB of RAM, I have now. The OS X El Capitan is installed on the SSD. In this configuration, everything worked well, with absolutely no problem whatsoever. Sometimes, I ran disk utility to check both of my hard drives and no problem.

  Unfortunately yesterday, strange things started going. First of all, I noticed some unusual glitches when you browse the internet with Safari. I'll try to describe the best I can because they lasted about 2 seconds, so I don't recall. In any case, all of a sudden, as if half right of my screen has shifted in the middle of the screen and it was wrong and image around was all damaged or distorted but legible. He'll be back to normal when I switched between applications or revealed the office displays the windows of all running applications.

  It was similar to this (below) but much larger.

  

  Then, I continued my work as if nothing had happened, when all of a sudden my mouse pointer disappeared and the system froze completely. It was just totally frozen, the time was not moving and the computer did not react somehow to the keys I pressed. Unable to do anything, I had to press and hold the power button to turn off the computer. After starting it again once I hear the ringtone, I see the gray Apple logo and the loading bar. When the loading bar reaches about 40%, a coloured horizontal line appears (see photo below), then it subsides quickly followed by a black screen, which is quickly followed by a blank grey screen with no Apple logo or the bar loading, just a gray screen Uni, where I'm stuck. The computer turns off by itself after about 15-30 minutes if I leave it like that on the gray black screen.

  The coloured horizontal line:

  http://i.imgur.com/9rzEyc4.jpg

  I can't start in safe mode or recovery mode.

  I CAN only boot single user mode, Apple Hardware Test mode, the boot (by holding the ALT/OPTION key) Manager and verbose mode. Also, I can start on the Internet recovery mode but once the download is complete, it is stuck on the gray screen (gray screen with the Apple logo WITHOUT horizontal line-online quick clear-online stuck on the gray screen black screen)

  After a lot of googling and reading, that's what I've tried so far:

  -' fsck - fy " in single-user mode

  -running Apple Hardware Test and the Apple Hardware Test extended, both are zero problem

  -Reset PRAM and NVRAM, MSC, several times

  -with the help of this guide: https://www.afp548.com/2015/01/14/when-yosemite-has-fallen-and-it-cant-get-up/ in single-user mode: "rm - rf / Volumes/Macintosh\ HD/private/var/db/BootCache * '

  "rm - rf/Volumes/Macintosh\ HD/Library/Caches/com.apple*"

  "defaults write DSBindTimeout HD/Library/Preferences/com.apple.loginwindow.plist Volumes/Macintosh\ - int 10.

  
  

  -in single-user mode: empty the trash

  -in single-user mode: "sudo purge"

  
  

  -in a single user mode: 'exit' or 'reboot'

  
  

  
  

  However, during my fight, I could successfully arrives at the login screen, log in and use my MacBook for some time, about a half hour before the same thing happens, the mouse disappears and the system to freeze completely. I remember that both times where I was able to get to the login screen, it was after I had been in single user mode and typed 'Quit' or 'reboot'.

  The above colorful horizontal line also appears in the single-user mode when I type "exit" AND I am UNABLE to get to the login screen later (photo below). It just goes to the gray white screen. Those two times when I was able to connect to exit single-user mode, the horizontal line colored is NOT appear in single-user mode.

  The horizontal line colored when you exit single-user mode:

  http://i.imgur.com/0tOVEO6.jpg

  
  

  
  

  Here's what I see in Verbose mode:

  http://imgur.com/LJIRyo

  http://imgur.com/4HF4hvJ

  http://imgur.com/uMdHY5Z

  http://imgur.com/WSswHKK

  MacBook Pro repair for graphics issues outreach program

• BlackBerry Smartphones Blackbold does not start after the progress bar screen. any help

  I have a problem with my blackberry bold 9700. When I reboot, the next screen that comes after the progress bar screen is my network name of phone, and nothing happens. I get a screen of "vodafone" with their logo.  nothing happens after and I am not able to access blackberry. What's wrong. any help on how to run again

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  Good luck and let us know!

• Acer Veriton M275 of does not start after the opening and closing of the case.

  I was about to update with an SSD HD, so I opened the folder and discovered there is no extension SATA ports. Private affair and now system put, CPU fan runs but no display or power USB for keyboard and mouse. Have you tried bypassing the switch of intrusion with a rider-no difference. Tried to remove the battery to reset the CMOS-no effect. Have reinstalled the case and tried without effect. Help

  Turned out to be bad RAM stick. Thank you.

• FF does not start after upgrading to version 27.0.1

  FF does not start after upgrading to version 27.0.1
  Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

  Firefox 27.0.1 is too recent for me to know what unique issues it may have. I will message you a link to download the installer for Firefox 27.0 to see that the inversion or not the problem.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• Windows 7 32 bit does not start after the installation of the need for assistance

  I have an iMac 21.5 inches (mid-2011) with 8 GB Ram, 2 TB SSHD, new HL-DT-ST DVD - RW GA32N and tried to install windows 7 (32 bit) on using Boot Camp Assistant.

  I already downloaded and copied software 4.0.4033.zip Boot Camp here-> https://support.apple.com/kb/DL1630?locale=en_US for my 16 GB Pen Drive MS-DOS (FAT32)

  The installation was successful, and windows 7 loads just fine 1st time, I created UserID and password, settings etc... using the apple keyboard then installed the drivers from apple on this issue of my 16 GB USB key. Seems my Magic Mouse works but my keyboard is not detected

  Then I tried to restart so the changes would come into force, and since then my Windows will not start or run Windows 7

  Now if I start my iMac hold down the Option key, I get Macintosh HDD, windows, recovery 10.11.4 and DVD. If I select Windows or Windows DVD it starts Booting then black screen followed by this Message on the screen «Press a key to boot from the CD or DVD...» »

  If I press any button it starts booting from DVD and gives me the option to install Windows and if I do not press a button some then nothing happens

  Windows does not start a BootCamp HDD and I'm left with no option but to press on the button / stop to stop iMac.

  Fortunately my El Capitan works well, but my Windows will not start. I tried 2 times install windows 7 32 Bit on my BootCamp HDD.

  So any help, I do not understand what am I'm doing wrong, I would be really grateful if someone who knew bootcamp can guide me so that I can run Windows OSX on my iMac.

  Thanks in advance.

  Remove the DVD, boot in OSX and after the release of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• Re: Smoker L30-10 X PSL33E does not start after upgrading RAM

  Hello

  I have a problem with my laptop.
  It has 1024 MB of RAM (2 x 512), but it wasn't enough, so I decided to update to 2048 MB (2 x 1024).

  I bought two modules and my computer does not start after changing them.
  It was only a screen black (same BIOS has not started). I tried another combination of installation of memory modules RAM.
  2 x 1024 - did not work
  1 x 1024 - did not work
  1 x 1024 + 1 x 512 - working but not properly.

  BIOS find that I only 896 MB (1024-128 for the video card)
  I said OK. Let's see what will show windows. He was also 896 MB.
  I launched CPU - Z and it shows that the total size of memory is 1536 MB (medium detect both modules).
  I found that CPU - Z detect 1 module 1 024 MB and 512 MB secondary, but the BIOS detect only 1024 MB 1536. How is that possible?

  I have fought, is that my BIOS is old, then I update the toshiba Web site form most recent version, but the problem persists.
  Please someboy help me and tell what to do.

  PS. the Modules are new and work correctly.
  They have been tested.

  Hello

  Have you used two identical RAM modules?

  What kind of modules did you use?

  In my view, that the problem is related to the new, inserted modules.
  There must be something wrong with the modules or modules are not completely compatible if the laptop can not boot after installation.

  According to a few pages of the book handles the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM modules.

  Did you use these modules?