Help, please. Back to the Quiz creates problems
Thank you for reading this issue.
I use 6 Captivate with all updates.
I have a long tutorial. I wanted to put in place corrective measures, which means that the learner, when the quiz, you be reshipped to the slide with the answer, then returned to the question quiz that he or she missed.
This should not be a problem. However...
That the learner progresses through the lesson (not the quiz section) the first time and gets the slide just after 'jump to the quiz', the slide seems to stop at first, showing initial content, but stopping. He plays the audio and there is no additional information in the slide. If you press play at the bottom of the course, it processes as usual. What happens to all the slides when the restoration is requestion.
Details: For each question in the quiz, I put 'Last attempt' to move to the slide. The slide provides the correct information located on the course. That's all what I changed to Quiz properties. Let's we jump to slide 26.
Slide 26, I click my button to continue. Action, I change the option for "success" to "resume the quiz.
Here is some of the best. So when published or read, we come to slide 26 without problem. As it processes to slide 27, is where it shows initial information at time 0, but does not continue, or audio plays.
A test, I deleted all slide 27 except for audio, or other executives. Not good.
What is happening to the actions of all THE «back to the quiz»
It shouldn't be rocket science. But I'm totally stuck in the water. If anyone knows what I'm doing wrong?
Published as executable, seen in FF and latest IE, as seen in Captivate.
Thank you!
Well, I found the answer. I was duplicating slides, and apparently it works well with return to element quiz. Still don't know why, but when I created new landslides, sanitation, worked perfectly. Go figure. Hope this helps someone else out there who has a similar problem.
Mark
Tags: Adobe Captivate
Similar Questions
-
Why can I not downloand the guided help to back up the registry keys?
I have Windows XP with SP3 and Internet Explorer 7 on my gateway Media Center 11. I tried to download the INTERACTIVE HELP to back up the registry in Windows XP and I got a message saying "it was not available. Do you have a cure? Thank you.
Hello
I suggest you to download from this link and check to see if the same problem happens:http://support.Microsoft.com/AW/322756
Check if that helps.
-
Insert the module {cc_security} and captcha and continues to receive spam on forms Adobe Catalyst submissions. Help, please! Also the required field is be circumvented.
This has been resolved through Adobe Live Chat Support. Thank you
-
Help, please! DOWNLOAD THE WINDOW PROBLEM
When I start to download, without any window appears. If I open standard "downloads" in the start menu - a library opens. I can see my downloads here, but is not as usual. I just want to see the usual window! Help me please. Previously I never had problems with this app! / 20.0 (rus) Firefox / Windows 7 x 64
Joergen salvation!
Thank you very much! Your answer helped me! Now I am happy, everything is back! =)
Best regards, Philip -
Quick help please - App in the Simulator
Hi guys,.
I hope that for a quick resolution here to get my apps submitted before the deadline for the free playbook
I went through all the tutorials and successfully signed my android applications and managed to get the icon to the simulator by clicking the .bar created in eclipse and then go to blackberry tools and then install, but when I click on the icon in the Simulator, he opens says «Initializing please wait...» "then after about 30-45 seconds, the start of blackberry screen appears and then just goes back to the home page.
Someone else this experience? Can you point me in the direction of what can go wrong?
Thank you
Ian
Thanks to everyone on this thread and the other thread problem for their suggestions to solve this problem.
I had the same problem, but I would just add something that makes the Simulator works for me...
-Already put 2 carrots on WMware, as suggested elsewhere. Still the Simulator was not for me.
-Put the monitoring high task (for processes in WMware Windows Task Manager)
and finally it worked! Works quite slowly, but I found this on other computers: at least it opens the app!
-
When I try to do a CC update I get an error message U44M1I210, "failed update - impossible to extract the downloaded files. Try to press to redownload again. (U44M1I210) ' - help please - re-don't download makes no difference, applies to the latest Indesign, Illustrator and Photoshop CC, others seem to be updated without problems. I can see the disk image files in the AAMUpdater folder, but they will not open and come up with message ' could not be opened - busy resource.
Another thing that makes everything work ultimately (after I finally properly installed all Apps CC etc - I couldn't get the Apps to save my preferences for each of them and Indesign would not open yet).
Make yourself as a user in the users and groups on "Admin", is added and with privileges "read and write" and "Apply to the clos etc.", when you 'get Info' on the hard drive if you can access/modify all the files and folders on the hard drive.
-
Is there a way to clean the answer already registered when they return to the quiz?
You cannot reset a default question slide. There are click on the animation (to deselect a hotspot) or use the clear button. I never use the default Hotspot slide.
-
Please help, CD´s Rescue &; Recovery recovery creating problem
Hello.
I always get the following message when I use rescue & recovery to create general recovery for my HARD drive.
Until 4/2008 rescue & recovery has worked. The accepted page 44 doesn´t works not at all.
"Resources required by this application are already in use. Please try again when the other application is completed. »
I Don t want to save the factory settings, but my HARD drive as it is right now.
R61 Type 8918-5WG professional XP
Thank you
Fixed a problem. Just remove the old version of rescue & recovery completely from your HARD drive, before you install a new.
Don t try to update with the new!
-
Hello. I have a model that consists of a large number of small irregular dots in a diagonal pattern that I have repeated it. I need to make some sort of Warp effect so that the points at the top of the image are crushed together making them more "dense" and low points are tight and more spaced making it "less dense". This effect must be gradually from top to bottom. Essentially points to the environment will be like in the original, in the upper part that they will be crushed and down spread.
I'm new to Illustrator and have tried envelope distort, but can't seem to find an effect that will give me the progressive change. Can someone help me please?
use an envelope distort > make with a net.
knit 1 row 1 column value.
then move the handles to get the desired section and the squish.
blue dots indicate the position of the original handle
red dots indicate the new position of the handle
-
disable the inputText on click of a button, do not help please backing bean-shortcut
Hello
the use case is as simple as that:
need to disable an element on the page when the button is pressed by using the quick method which does not use bb
< af:commandToolbarButton text = "Disable" id = "ctb1" action = "backFromBrowse" / >
I wonder if < af:setPropertyListener / >, < af:clientAttribute / > could be used?
Thanks in advance
Published by: grodno on 14 February 2013 02:33Yes you can do it without bb.
-
Can anyone help please with Javascript. 2 small problems.
Hello. I created a dynamic PDF form with fields. I have 2 problems that I don't know that someone can help me with. (Someone I can email this PDF on request).
PROBLEM 1. In this form, I have a table (in fact I think that it is a form of sub) which has 3 buttons associated with it ('Add Row', 'Delete Row' and (line Clear').) A single button adds a new line. It works, but effectively, it duplicates the line (and all the fields/cells of text contained in the line) and this new line at the bottom of any existing lines. What I'm asking, is for this button (the button gets duplicated with the line) to place the new line immediately below the line where it is clicked. That is to say, imagine you open the document, complete line (at this stage it is only) and click on the button 'Add Row '. You now have 2 rows (large), while you complete the second row. Now, here's my problem, if you press the button "Add a line" on the first line, a new 3rd line is added at the bottom and not between line 1 and line 2.
Actually if you have dozens of lines filled and you need to insert a line of amendment, currently it is impossible without deleting all the lines to the point where you want to check/insert.
PROBLEM 2. In this line of alphanumeric text, the are two fields (called "Rate" and "Loading") where dollar amounts are entered. As the form is filled (lines can be generated dynamically and there fields filled out manually by the user) there may be potentially dozens of lines in a completed form and, as each line has several fields of alphanumeric text, one can imagine of forming columns once there is more than 1 line. At the end of the form, the totals are automatically calculated. I created a button to reset (clear) all amounts in these two specific areas (columns), but in all ranks. Unfortunately there is something wrong with my script syntax like this button does not. (I want this facility as the end of the form, which is a draft budget, I need to send two copies - one accountants with numbers and logistics and a second copy to another Department that I don't want to give the figures, so I need the key to clear the numbers without having to erase each cell individually).
Any help that anyone can give would be much appreciated.
Please send me an email to
[email protected] If you want I send you the file.
See you soon
Bradd
Send the form to
[email protected] and I will give it a go... include a reference back to this forum announcement.
Paul
-
technical help please on "show the power inverter.
Hello
I'm not sure weather its ther "inverter" or anything else... but the engineer told me that...
I have a HP Pavilion lappy 1211-AX... I bought a stack of China made 12...
now on the battery my screen begins to flickring and gets along with care makes the noise also (some courses like... in a light as tube)
If the comp eng told me that the fault may be in the converter to display...
but in the adapter power sector/display isn't ficker...
so is it really the "inverter" problem or the battery...?
and also
battery does not load if cliberated...
Urgent please help
This is my second post... Please help...
There was d ' assign problems with the dv6 with flickering white lines, but I don't know if this applies here, but here are the measures taken in other positions. (I'm not through all the posts, so I may have missed something).
The threads say _ try to reinstall the latest driver of CCC _ try your support page or if it does not directly from AMD. Save the driver on the desktop and install from there, not in a temporary folder and don't forget to do an installation of the driver, just install it over your present.
Also seems to be a problem with the power settings, go into power settings and choose not to have the display turn off on battery and plugged _ make sure that the display stays on all the time.
To comply with all this trial and connect an external monitor with the battery and the adapter and run them both at the same time _ in the other threads were reported, Twinkle stopped.
Here is an article also, but again I know not whether it applies here.
http://www.TomsHardware.co.UK/Forum/273975-15-solution-screen-flickers-cards-4800-series
My personal opinion on it is that it doesn't seem to be the inverter, if it was that she would make him just the adapter so _ inverter problems occur when the battery is inserted.
It is also strange to just start doing it now _ it seems to be a temporary problem.
You can also try installing an older graphics driver.
-
Help, please! Remove the audio only pre-existing to make the new voice overs.
Greetings,
I made a video which is an advertisement for a company. How to add subtitles, I want remove the audio from the middle of the video and then create new voice on audio. I looked through the forum and did not find any discussion on eliminating only part of an audio segment and the creation of new audio to replace what you deleted. Please let me know if you have any advice or tips. I'm serious need assistance. Thanks in advance!
Thank you
Reid
Someone I messaged on another forum and provided the shortcut "command + K. Seems to work so far. Thanks for any help.
-
Help please. Enter the name of TEB in order to activate the next button
Captivate v5.5
I tried and failed to create this which I am sure is very simple.
Using a text entry area, the learner must register its name.
Only after that it will be the NEXT button - which is already visible - become active to take them to the next slide.
The name, they enter into the TEB will be used throughout the project and quiz results slide.
I've been trying to get this to work with Variables and conditional actions, but failed.
Could one of the list of experts kind down the correct steps please?
NEL
Sorry Noel, was very busy yesterday. Here's a test:
- Create a next button, but set to invisible in the PI, his break should be later than the break of the ETB
- For ETB, keep the default settings, but no validation; in this case the action of success will always run; Select 'Execute Advanced actions' and open the dialogue-AA
- I also created a text caption, set invisible, which will be made visible if the BER remains empty
- You need at least a user variable: v_null which is empty, do not put anything as default
- I also created my own user variable to associate with the ETB to replace the generic (has the same name as the TEB): v_name
Here are the screenshots of slide + timeline, THEN and the ELSE part of the conditional action advanced that is triggered by the TEB.
Lilybiri
-
Need help please, bios sees the new hard drive but still cant boot from the cd-rom
HI there, Im having some problems here. First of all, I have a Dell Dimension XPS Gen 2 with BIOS A06. I replaced the original hard drive to 120 GB because I received a stop error code with a new 320 GB (000000 x 24 or somethinglike that) but after research I was convinced it was the reader. I installed the new drive and the BIOS sees it under drive as primary drive SATA configuration... It's good, I guess, but now when I go to the sequence of hard drive I get (1. Unknown device (not installed) 2. System BIOS 3 boot devices. (Not installed) USB device) why the drive is not displayed here?
OK, so now when I try to boot from a CD-rom Home XP I get "strike F1 to retry boot, F2 for Setup utility. I can't seem to get around this problem any time now. I can get it to boot from a floppy disk, but not the CD, why is this? The two CD-ROMs are appearing in the BIOS as second master and slaves. IM really stumped on this one, please help!
Message edited by jaygen on 18/03/2008 20:22
Maybe you are looking for
-
How to connenct laptop from Vista to Windows XP PC to share internet?
My wife recently bought a new laptop Toshiba A100 with Vista installed. My PC, connected to AOL Broadband uses XP as an operating system. I'm trying to set up a wireless link. AOL, said that XP and Vista are not compatible, and to put in place a link
-
I have a bad drive hard dv6-6190us. Anyone know if the motherboard will be accomdate sata2 sata vs 3 (6 gb/s) transmission for replacement of hard drives?
-
Installation of DirectX installation error "an internal system error has occurred."
an internal system error has occurred. Please see DXError.log and directX.log in your windows folder to determine the problem. I had Directx 10 or 11 before, and I ran DirectX Rollback wizard, hope it would completely uninstall, but it didn't. Where
-
Hello, here is the thing. Reformatted a computer with recovery discs... Office to the top and everything looked ok... Windows Installer started and makes the computer reboot several times as usual. BUT NOW I have a black screen with a window saying "
-
Struggling to activate the trial version of Fusion 6 in apple MBP
Whenever I click to activate the VMware, I get a message:Could not open the file "/ Users/xxxxxx/Library/Application Support/VMware Fusion/Machines/virtual startup/Boot Camp Camp.vmwarevm / Boot Camp.vmdk:The system cannot find the specified filesugg