help please with driver prodikeys

Similar Questions

• Help please with BSOD

  BSOD desktop computer:

  "The problem seems to be caused by the following file: TDI." SYS PAGE_FAULT_IN_NONPAGED_AREA technical information: STOP: 0 x 00000050 0xB9F6A1D0, 0 x 00000001 0xB9c5of4A TDI 0x00000000. SYS address B9c5of4A base at B9c50000, Date Stamp 48025834 physical memory dump complete. »

  What should do?

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow the instructions for posting at this link

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

• HELP PLEASE WITH MY WIRELESS NETWORK CARD CONSTANTLY HAVE TO BE SET

  I have an Acer Aspire 5552-3691 with Atheros AR5B97 wireless adapter. It shows that I have an internet connection, but I have to constantly run network diagnostics it resets then the wireless network adapter and which solves the problem. However, the fix is only short it can last 2 minutes or if I'm lucky 15 but nevertheless it continues to occur. Help, please

  Hello

  Thanks for posting your question in the Microsoft Community forum.

  Refer to this article and let us know the status.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  Thank you.

• Help please with the addition of a Section of the video

  I created a video for a school organization. Have completed a section or scene, I would like to add more scenes before this scene. I know how to add things, but I don't want to start adding videos and pictures and then my audio may not be in the same place. Is it possible to add without the pictures and audio are out of sync? Can I connect the audio to the video? Help, please. Thank you!

  I guess that you do not want audio move with the clip with the fact that it is already synchronized. In this case select the video and the audio clip, right click and select "link Audio and video.

  

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

• Can anyone help please with Javascript. 2 small problems.

  Hello. I created a dynamic PDF form with fields. I have 2 problems that I don't know that someone can help me with. (Someone I can email this PDF on request).

  PROBLEM 1. In this form, I have a table (in fact I think that it is a form of sub) which has 3 buttons associated with it ('Add Row', 'Delete Row' and (line Clear').) A single button adds a new line. It works, but effectively, it duplicates the line (and all the fields/cells of text contained in the line) and this new line at the bottom of any existing lines. What I'm asking, is for this button (the button gets duplicated with the line) to place the new line immediately below the line where it is clicked. That is to say, imagine you open the document, complete line (at this stage it is only) and click on the button 'Add Row '. You now have 2 rows (large), while you complete the second row. Now, here's my problem, if you press the button "Add a line" on the first line, a new 3rd line is added at the bottom and not between line 1 and line 2.

  Actually if you have dozens of lines filled and you need to insert a line of amendment, currently it is impossible without deleting all the lines to the point where you want to check/insert.

  PROBLEM 2. In this line of alphanumeric text, the are two fields (called "Rate" and "Loading") where dollar amounts are entered. As the form is filled (lines can be generated dynamically and there fields filled out manually by the user) there may be potentially dozens of lines in a completed form and, as each line has several fields of alphanumeric text, one can imagine of forming columns once there is more than 1 line. At the end of the form, the totals are automatically calculated. I created a button to reset (clear) all amounts in these two specific areas (columns), but in all ranks. Unfortunately there is something wrong with my script syntax like this button does not. (I want this facility as the end of the form, which is a draft budget, I need to send two copies - one accountants with numbers and logistics and a second copy to another Department that I don't want to give the figures, so I need the key to clear the numbers without having to erase each cell individually).

  Any help that anyone can give would be much appreciated.

  Please send me an email to

  [email protected] If you want I send you the file.

  See you soon

  Bradd

  Send the form to

  [email protected] and I will give it a go... include a reference back to this forum announcement.

  Paul

• help please with Oregon

  Hi, I have a bunch of logos in a file and animate with Oregon, so I create a timer to show (fade in - fade) logos one by one;

  I had already melted all the logos with alpha = 0; but don t an idea on how to call it inside the Oregon function. My all the logos are called logo1, logo2, logo3 etc and I try to create a variable to contain a certain number and them put the first part of the name (logo) + the variable to call the movieclip but it didn t work. Please if someone could help me with this problem.

  This variable contain the 2nd part of the name

  var logoContador:Number = 1;
  var miTimer:Timer = new Timer (3000);
  miTimer.addEventListener (TimerEvent.TIMER, goTimer);
  function goTimer(TimerEvent:Event):void
  {
  Tweener.addTween(logo+logoContador,{alpha:1,time:1,transition:"easeInQuad",});)

  Tweener.addTween (logo + logoContador, {alpha: 0, time: 1, delay: 1.7, transition: "easeInQuad,"});

  logoContador ++

  }
  miTimer.start ();

  I'm not familiar with the help of Tweener, but just before the last brace, you have a comma.  So maybe that's your problem... you have a comma in there too or you are missing the last parameter which must follow the comma.

• NB100 help please with fan and graphics settings

  Hi, I just bought the NB100 and have a few questions, I hope someone can help me with.
  The fan icon goes grey or white according to the parameters by using FN and F6, but I can't feel any difference in the air around the grid on the right. It is on when the icon shows white or gray? Does really?
  My second question is about the graphics settings. The intel power option that appears when the icon in the taskbar graphivs is double clicked seems to be disabled. There are automatic brightness sliders and energy saving, but none can be selected, how is it permits?
  My last question is about the games. I tried a few alumni who were not graphic intensive, Deus Ex and the sins of a solar empire, but I had problems in the text boxes that require a response, and in the case of Deus Ex, they say that the graphics drivers are not compatible. Has anyone got Ant with games? I travel a lot and thinking, I want to have one or two other than playing cards installed etc.

  Thanks and regards, Brian

  On my machine that F6 is to mute sound, F8 is for the cooling fan. Based on this fact the fan speed change.
  I can't help with the power settings, like mine all seem to work OK and I can make changes.
  Have you tried changing the settings through preferences/system/Power Management?

• Help please with a printer.

  I use an HP laserjet M1212nf MFP printer. I have recently upgraded to Windows 8 to 8.1. Now, the printer keeps going through a phaze "during initialization... "and will not respond. I have re-defined, transformed extinguished/turned on and I'm perplexed as to what to do next. After that he goes through a couple of cycles, it will sit in the "Ready" mode for a few minutes and then restart the "Intializing. If I'm lucky, I can get it to print only after after the second or third print command was sent.

  Hi obscured.

  I see by your post, after the update to Windows 8.1 the printer keeps initializing and then sometimes appear after giving the command to print a couple of times. I can help you with this problem.

  I'd do a power reset to see if that will solve the problem.

  When the printer is still lit, disconnect the power cable from the back of the printer.

  Then, disconnect the power cable from the wall outlet.

  Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Just to rule out a hardware problem, try and print a self-test on the printer hardware to see if it is a hardware or software problem. Unplug all cables from the printer except the power cord.

  Restart the printer. Printing of Pages of information. Go to the section for M1210 / M1218nfs series.

  Then, you can reconnect the cables again.

  I would like to know if the test of the material printed.

  Since the upgrade you uninstall and reinstall the printer software?

  If you do not, then I would like to see if this will solve the problem.

  Uninstalling the printer software.

  HP LaserJet Pro M1212nf MFP drivers.

  If you're still having problems, then go through the steps described in this document.

  Print jobs are stuck in the print queue.

  How is the printer connected? (USB/Ethernet)

  I would like to know how it goes for you!

  Good day!
  Thank you.

• Help please with flash CS4!

  Hello, I'm at school and I have a mission to fulfil on flash, but when I try to make an object, a little boring box appears around my object instead of having nothing around him, I spend it for nothing and tried to use the selection tool, but then it didn't go all graph as it should be, and instead This box is back.  Ignored, even once, I tried to use the BONE tool, but it only works on a single shape, and he's not going to others to link!  This is what looks like the box on the object and it's really frustrating me.  Help, please!

  You have selected the tool "object drawing". In your toolbar to the bottom, there is a button that is just a circle (go over it and it will say "drawing object" (it's under your color palette paint COP and above the fill lock button.) Provide your sounds like mine! Just click on this issue and it will switch the drawing of the object on and outside. You can break apart objects that you have already established as objects by selecting the form and pressing 'cmd' + 'B' (ctrl + b on a pc)

• Someone help please with the eyre audit report?

  EtreCheck version: 2.9.10 (261)

  Report generated 2016-04-08 21:36:12

  Download EtreCheck from https://etrecheck.com

  Time 02:45

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click [delete] to remove the adware.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 785

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X Mavericks 10.9.5 (13F34) - since startup time: less than an hour

  Disc information: ⓘ

  HTS547550A9E384 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 (Go 460,16 free) - 36 errors

  Drive failure!

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  ~/Library/Caches/com. Apple.Safari/extensions/Omnibar.safariextension

  ~/Library/Caches/com. Apple.Safari/extensions/Searchme-2.safariextension

  ~/Library/LaunchAgents/cinema-plus-1-1.ver

  ~/Library/LaunchAgents/cinema-plus-1-1_enabler.plist

  ~/Library/LaunchAgents/cinema-plus-1-1_updater.plist

  found 5 adware files. [Remove]

  Kernel extensions: ⓘ

  / Library/Extensions

  [loading] com.symantec.nfm.kext (6.4.1f36 - SDK 10.9-2016-03-30) [Support]

  / System/Library/Extensions

  [loading] com.symantec.internetSecurity.kext (6.4f36 - SDK 10.8 - 2016-03-30) [Support]

  [loading] com.symantec.ips.kext (6.4f36 - SDK 10.8 - 2016-03-30) [Support]

  com.wibu.codemeter.CmUSBMassStorage [no charge] (1.0.7 - 2016-03-30) [Support]

  Launch system officers: ⓘ

  [loaded] 5 tasks of Apple

  [loading] 142 tasks Apple

  [operation] 37 tasks Apple

  Launch system demons: ⓘ

  [failure] com.wibu.CodeMeter.Server.plist (2013-11-15) [Support]

  [loaded] 50 jobs Apple

  [loading] 140 tasks Apple

  [operation] 59 tasks Apple

  Launch officers: ⓘ

  [loading] com.symantec.errorreporter - periodicagent.NFM.plist (2015-09-28) [Support]

  [operation] com.symantec.uiagent.application.NFM.plist (2015-09-11) [Support]

  [loading] org.gpgtools.Libmacgpg.xpc.plist (2015-09-23) [Support]

  [loading] org.gpgtools.gpgmail.enable - bundles.plist (2015-03-08) [Support]

  [loading] org.gpgtools.gpgmail.patch - uuid - user .plist (2015-03-08) [Support]

  [loading] org.gpgtools.gpgmail.updater.plist (2015-09-23) [Support]

  [loading] org.gpgtools.macgpg2.fix.plist (2015-03-08) [Support]

  [market] org.gpgtools.macgpg2.shutdown - gpg - agent.plist (2015-03-08) [Support]

  [loading] org.gpgtools.macgpg2.updater.plist (2015-03-08) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-03-07) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2016-04-08) [Support]

  [failure] com.symantec.SymLUHelper.NFM.plist (2015-09-11) [Support]

  [loading] com.symantec.UninstallerToolHelper.plist (2015-04-21) [Support]

  [operation] com.symantec.deepsight - extractor.NFM.plist (2014-09-10) [Support]

  [loading] com.symantec.errorreporter - periodic.NFM.plist (2015-09-28) [Support]

  [failure] com.symantec.liveupdate.daemon.NFM.plist (2015-09-11) [Support]

  [operation] com.symantec.sharedsettings.NFM.plist (2015-09-11) [Support]

  [operation] com.symantec.symdaemon.NFM.plist (2015-09-11) [Support]

  org.eyebeam.SelfControl.plist [no charge] (2014-12-26) [Support]

  [loading] org.gpgtools.gpgmail.patch - uuid.plist (2015-03-08) [Support]

  User launch officers: ⓘ

  [no charge] cinema-more-1 - 1.ver (2014-10-28) Adware! [Remove] 

  [failure] cinema-more-1 - 1_enabler.plist (2014-11-06) Adware! [Remove] 

  [loading] cinema-more-1 - 1_updater.plist (2014-11-06) Adware! [Remove] 

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist (2014-10-17) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  iTunesHelper UNKNOWN (missing value)

  uTorrent UNKNOWN (missing value)

  Genieo UNKNOWN (missing value)

  TuneupMyMac UNKNOWN (missing value)

  Other applications: ⓘ

  [ongoing] com.etresoft.EtreCheck.70432

  [loading] 442 tasks Apple

  [operation] 284 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 21.0.0.182 - SDK 10.6 (2016-03-10) [Support]

  QuickTime Plugin: 7.7.3 (2015-01-30)

  Flash Player: 21.0.0.182 - SDK 10.6 (2016-03-10) obsolete! Update

  Default browser: 537 - SDK 10.9 (2015-01-30)

  Silverlight: 5.1.40728.0 - SDK 10.6 (2015-08-24), [Support]

  NortonInternetSecurityBF: 6.4 - SDK 10.9 (2015-09-28) [Support]

  JavaAppletPlugin: 14.9.0 - 10.7 (2014-09-07) check the version of the SDK

  User Plug-ins internet: ⓘ

  CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]

  Safari extensions: ⓘ

  Norton Security (2016-02-11)

  Searchme (cache only) (2015-11-08) Adware! [Remove] 

  Omnibar (cache only) (2015-02-23) Adware! [Remove] 

  AdBlock (2016-03-18)

  3rd party preference panes: ⓘ

  CodeMeter (2013-11-15) [Support]

  Flash Player (2016-03-07) [Support]

  GPGPreferences (2016-01-04) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% fontd

  3% kernel_task

  3% WindowServer

  0% com.apple.WebKit.WebContent

  0% aosnotifyd

  Top of page process of memory: ⓘ

  Kernel_task 483 MB

  315 MB SymDaemon

  PluginProcess 217 MB

  180 MB Safari

  Mds_stores 94 MB

  Virtual memory information: ⓘ

  1.04 Go free RAM

  2.96 used GB RAM (1.34 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  April 8, 2016, Self test - 21:17:24

  Hello Chocbar648,

  Your hard drive may be faulty.

  You do not have a backup.

  You have adware.

  You must:

  (1) buy an external hard drive and make a Time Machine backup

  (2) use EtreCheck to remove your adware and perform another backup.

  (3) get rid of the antivirus software which obviously does you no good.

  (4) operate your machine for a week or two. Then run another EtreCheck. If you have disk errors, then you should get your hard drive replaced. It is possible that your antivirus is causing these errors.

  (5) If you continue to encounter disk errors, download your hard drive replaced in an Apple Store or Service Center authorized Apple. I suggest a Service authorised Apple Centre and see if they update your RAM and give you an SSD too. You don't need really to do with the Mavericks, but if you want to go to Yosemite or El Capitan, you'll thank me. Given that you need to open the machine

• Help please with playlists

  Hello world

  I got a Sansa Fuze 8 GB a few weeks back, but I can't seem to recognize the playlists at all, not matter what program I use.

  First of all, I used Windows Media Player as the suggested help manual. I made a playlist and followed all the instructions, but no reading list appeared in the folder to the playlist on the device, instead all the songs in the playlist were just re-copied and the records of artists, so I got 2 copies of everything on the playlist on the device but no selection.

  Then I tried Media Monkey to the playlist and transfer it to the device, nothing happened. Then, after reading something on one of these forums, I've done a m3u playlist in Media Monkey and copied to the folder on my computer where I had saved on the device - the playlist appeared on the device, but there are no songs on this subject.

  Then I tried Realplayer; I created a playlist, he transferred to the device, but it does not appear in the folder to the playlist on the device, but once again like WMP it just uploaded a 2nd copy of everyhting on the playlist in the records of artists on the device.

  Then I tried Playlist Creator 3, after seeing another post about playlists. I did a m3u playlist and a pls (whatever that means!), them saved on my hard drive and then transferred from the HDD to the Playlist file device - they came straight to the folder, but there are no songs on them.

  Can someone help me? All I want is to be able to do some playlists to play on my Sansa Fuze without copies of songs cluttering up the space in my MP3 player. It cannot be so difficult? I'd appreciate any help or advice, the simpler the better I'm not very techie. If anyone can suggest another request to use, or a solution to work with Windows Media Player, I would be very grateful. Thank you.

  PBC

  You use the MTP mode?  If you are, you can create playlists without software by selecting the tracks on the device in windows explore and right click, the menu should have a playlist option.  You can drag and drop the other titles in the playlist.

  In the media monkey, you have the playlist on the sync list?  If you click with the right button on the player in the left side of the program and choose (from memory) either options or properties, the tabs will show you what will be synchronized.  Under the playlist tabs you must select the playlists that you want to copy to the device, and then synchronize the device.  This is making the assumption that you synchronize your music collection via media monkey.

• I can't open the pictures and need help please with my Windows Vista and the WindowsLivePhotogallery error Code: 0x8007007e. Carole

  I have a Windows Vista laptop with many pictures.  I can not open the photos on my Windows Live Photo gallery and have received

  Error code: 0x8007007e.

  How this can be solved?

  Thank you.  Carole

  This forum is for Microsoft Security Essentials.

  Please go to the Windows Live forum to get help.

  http://windowslivehelp.com/

• Windows Home Server help please with the reader.

  I have a Windows Home server in my office that has a single hard drive in it.  I continue to be told to use the repair utility when I turn on my computer.  I bought a new drive for the server.  Now that I need help, it's how to duplicate the new disc of the former, is there a way to do it, or do I have to copy all the content on another machine on the network, and then install the operating system from the beginning.  I want to avoid the loss of data.  Any help is greatly appreciated.

  There are essentially two options available

  Place the new drive as the primary drive and keep the original as a secondary disk. Install WHS as a repair install and it should pick up original and index folders and re-create the tombstones for them. Then use the move to folder option in the console to make the folders shared the second partition of the disk. However, the indexing process is quite intensive and is perhaps not ideal with a line of demarcation for lack of drive.

  Alternative, remove the old drive and install the new, install WHS as a new facility that will create partitions C and D, including the new shared folders empty. Once the installation is finished, put the old one in as second drive or if this is not possible an external drive dock and then copy the contents of the old drive in the new. That would be my preferred option because it is perhaps easier and safer.

  There is no option to save and copy and settings users, even with a repair installation, you must manually recreate the users.

• Help please with Photoshop CS2

  Hello

  I just got a new laptop and I try to install Photoshop CS2. I love this version. I installed it and I can not open.

  
  The file is there, but it used to open. Can someone help me?

  Thank you.

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

  IF Windows 10 read below

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Help please with creative cloud

  I buy the creative cloud two days a go

  but the problem is, to my first perfect computer installed with updates (photoshop and Lightroom) etc,

  but in windows, my second computer, show how to buy now, why?

  I am enter whit my Adobe ID
  

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena