NB100 help please with fan and graphics settings

Similar Questions

• A little help please with PHP and a contact form

  Hi all

  I have a bit of a problem with a contact form I have on one of my client sites. I executed the form of a simple .php for the details of the form by e-mail to the customer. Validation of spy, I added in the email text box making it must have of ' @ 'and'.' completed. We shouldn't need more.

  The thing is that my client gets a lot of blank form returned to him, I find something to do with sitelock.com because that is where the I.Ps back. My guess, and as a beginner enough, apologies if I'm wrong, is that the security of locking the site scans the php file that sends of course.

  I did some research and it is clear that I need a side validation server in the php file, and I think that not mistaken in thinking that he needs the function "preg_match". I'm not very well informed about php at the moment but I need to solve this problem quickly, so I was wondering if any of you would be kind enough to show me exactly what code should I add to the php form to require the same ' @ 'and'.' validation as stated in the html file.

  I've added details of the php file below and thank you very much in advance for any help given.

  Jeff

  <? PHP

  / * Email * /.

  $emailSubject = "nursery firm Reservations."
  $webMaster = ' [email protected] ';
  
  / * Collection of data Variables * /.

  $title = $_POST ["title"];
  $surname = $_POST ['name'];
  $initials = $_POST ['name'];
  $street1 = $_POST ["street1"];
  $street2 = $_POST ['street.2"];
  $town = $_POST ['city'];
  $postcode = $_POST ['postal code'];
  $dayphone = $_POST ['dayphone'];
  $mobile = $_POST ['mobile'];
  $email = $_POST ['email'];
  $typeofpet = $_POST ['typeofpet'];
  $petother = $_POST ['petother'];
  $comments = $_POST ['comment'];
  
  $body = < < < NEM
  Title: $title
  Name: $surname
  Acronym: $initials
  Street one: $street1
  Two streets: $street2
  City: $town
  Postal code: $postcode
  Phone during the day: $dayphone
  Mobile: $mobile
  E-mail: $email
  Type of Pet $typeofpet
  Other pets: $petother
  Comments: $comments
  NEM;

  
  $headers = "from: $email\r\n";
  $headers. = "content = type: type/html\r\n";
  $success = mail ($webMaster, $emailSubject, $body, $headers);

  Add this at the top of your file before your block of PHP-

  Then add this at the bottom of the file-

  In other words, if the file is executed without a header $_POST that contains your submit button, nothing will happen.

• Hi help me with drag and drop with as3 if you please

  Hello friends,

  I am a newbie to as3 in flash and had a prob with drag and drop features

  var dragArray:Array = [square_word, circle_word, triangle_word];

  var matchArray:Array = [squareMatch, circleMatch, triangleMatch];

  var posArray:Array = [{x: 276, y: 207}, {x: 443, y: 207}, {x: 107, y: 207}];

  var currentClip:MovieClip;

  var startX:Number;

  var startY: number;

  for (var i: int = 0; i < dragArray.length; i ++) {}

  dragArray [i] .buttonMode = true;

  dragArray [i] .addEventListener (MouseEvent.MOUSE_DOWN, item_onMouseDown);

  matchArray [i] .alpha = 0.2;

  }

  function item_onMouseDown(event:MouseEvent):void {}

  currentClip = MovieClip (event.currentTarget);

  startX = currentClip.x;

  startY = currentClip.y;

  addChild (currentClip); bring to front

  currentClip.startDrag ();

  stage.addEventListener (MouseEvent.MOUSE_UP, stage_onMouseUp);

  }

  function stage_onMouseUp(event:MouseEvent):void {}

  stage.removeEventListener (MouseEvent.MOUSE_UP, stage_onMouseUp);

  currentClip.stopDrag ();

  var int index = dragArray.indexOf (currentClip);

  var matchClip:MovieClip = MovieClip (matchArray [index]);

  If (matchClip.hitTestPoint (currentClip.x, currentClip.y, true)) {}

  a match was found. Position the clip using the values of posArray:

  currentClip.x = posArray [index] .x;

  currentClip.y = there posArray [index];

  make not draggable:

  currentClip.removeEventListener (MouseEvent.MOUSE_DOWN, item_onMouseDown);

  currentClip.buttonMode = false;

  } else {}

  football match has not, so send the clip to the back where he began:

  currentClip.x = startX;

  currentClip.y = startY;

  }

  in this code, that I'm not the subject abruptly to its original position if he fell into a movieclip wrong (as we should have the availability of droping the drag square circle alse object) and then we should have a button to check if everything is correctly matched, if not after clicking another button 'correctitself', we should get the good objects droping on correct locations automatically

  Please help with any suggestions ASAP

  }

  assign your listener matchall checkAllMatchF and use button:

  var dragArray:Array = [square_word, circle_word, triangle_word];

  var matchArray:Array = [squareMatch, circleMatch, triangleMatch];

  var posArray:Array = [{x: 276, y: 207}, {x: 443, y: 207}, {x: 107, y: 207}];

  var currentClip:MovieClip;

  var startX:Number;

  var startY: number;

  for (var i: int = 0; i< dragarray.length;="" i++)="">

  dragArray [i] .buttonMode = true;

  dragArray [i] .addEventListener (MouseEvent.MOUSE_DOWN, item_onMouseDown);

  matchArray [i] .alpha = 0.2;

  }

  function item_onMouseDown(event:MouseEvent):void {}

  currentClip = MovieClip (event.currentTarget);

  startX = currentClip.x;

  startY = currentClip.y;

  addChild (currentClip); bring to front

  currentClip.startDrag ();

  stage.addEventListener (MouseEvent.MOUSE_UP, stage_onMouseUp);

  }

  function stage_onMouseUp(event:MouseEvent):void {}

  stage.removeEventListener (MouseEvent.MOUSE_UP, stage_onMouseUp);

  currentClip.stopDrag ();

  var int index = dragArray.indexOf (currentClip);

  var matchClip:MovieClip = MovieClip (matchArray [index]);

  If (matchClip.hitTestPoint (currentClip.x, currentClip.y, true)) {}

  a match was found. Position the clip using the values of posArray:

  currentClip.x = posArray [index] .x;

  currentClip.y = there posArray [index];

  make not draggable:

  currentClip.removeEventListener (MouseEvent.MOUSE_DOWN, item_onMouseDown);

  currentClip.buttonMode = false;

  } else {}

  football match has not, so send the clip to the back where he began:

  currentClip.x = startX;

  currentClip.y = startY;

  }

  }

  function checkAllMatchF (): Boolean {}

  for (var i: int = 0; i<>

  If (dragArray [i] .x! = matchArray [i] .x | dragArray [i] there! = matchArray [i] there) {}

  Returns false;

  }

  }

  Returns true;

  }

• Help please with BSOD

  BSOD desktop computer:

  "The problem seems to be caused by the following file: TDI." SYS PAGE_FAULT_IN_NONPAGED_AREA technical information: STOP: 0 x 00000050 0xB9F6A1D0, 0 x 00000001 0xB9c5of4A TDI 0x00000000. SYS address B9c5of4A base at B9c50000, Date Stamp 48025834 physical memory dump complete. »

  What should do?

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow the instructions for posting at this link

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

• need help please... Camera settings Option Causes browser Crash

  for any and all who can help...
  
  I am running XPSP2. all the versions of ie and firefox have the latest updates. have USB logitech quickcam messenger webcam... trying to get it Setup to simply diffuse through a ustream.tv flash application provided on their Web site. I tested the webcam and works very well on ustream.tv in ie and firefox on another system running xpsp2 so I know that's not the material of the webcam is not working. actually, it works very well and is recognized by windows Explorer and can be seen using this method. I uninstalled the flash player plug-in and reinstalled the many versions, but also the many versions of logitech webcam drivers. I always feel the problem described below.
  
  What happens exactly, it is that I can see an animation flash on any website... I can right-click on this flash animation and select settings... I can see the settings window and I can then select another tab in the settings except for the webcam... tab once I click on the webcam tab in the settings of flash player ie and firefox crash with an error on the .ocx for the plugin file? This is the dump of the error message and I hope someone much smarter than me can decipher this and give me some ideas on how to get this resolved. Thanks in advance for any help you can provide. Please here to reply to this topic. Thank you. TP
  
  error message below
  -------------------------------
  AppName: iexplore.exe AppVer: 7.0.6000.16473 ModName: flash9e.ocx
  ModVer: 9.0.60.120 Offset: 000ffdb2
  -------------------------------
  
  then the retail release is attached to this post...
  -------------------------------

  so much worse... problem solved... I also got a capture device video usb dazzle that was plugged in to one behind the computer... usb ports apparently both of these devices cannot be connected at the same time, otherwise the incident above.

• help understand the digital and graphical waveforms

  Can someone explain to me how digital waveform working with NOR?

  I did a channel physical and wired to a DAQMx create channel then I have it connected to a NSamp of 1Chan ereading Wfm DAQMx and then wired it to a graph of digital waveforms.

  I put digital and graphical digital waveform playback in a loop.

  When I run it, it seems to me only to get 1 sample on the graph per loop iteration.

  The desired output is to add each digital sample as a function of delay which can connected and or scrolls in time to examine what is happening with the signals.

  Where is my mistake?

  My VI is attached.

  Any help would be greatly appreciated!

  Also another quick question, is there a 'comment' as a command / / c or ' in VB?  Thank you.

  Hi Henry,.

  Thanks for the post! It seems that you are having problems with the acquisition and the graphic representation of digital data using DAQmx and LabVIEW. You are right that the type of program you have returned a single sample every loop iteration, because you make an acquisition without buffer, timed by the software. This means that the program reads a sample for each channel, whenever the DAQmx reading VI is called, which will depend on the speed of the software will run. In addition, when you view this data, the chart will only display data acquired for this iteration of the loop (that is, in this case, a single sample).

  To accomplish what you want will take some extra work and overhead costs in the software, but you can essentially use a shift register and accumulate samples that your program runs. There is a practice done just VI to do this kind of thing with digital signals and is called DWDT Append Digital Signals.vi (this can be found in the palette of functions in respect of programming"Wfm Digital Waveform"). I created a small example which you should be able to run that does this. What actually happens is that the waveform is rewritten each time with new data added in addition to the data passed in. To be able to scroll back and view this data, I turned off automatic scale on the x axis (if it is enabled, it will constantly increase and tries to show all the data at the same time) and selected just a data window to display. In addition, I added a horizontal scroll bar to scroll through the review data.

  And to answer your question about the code comments in LabVIEW, this can be done with a clear Structure of the diagram. You will find this structure in your palette of functions in respect of programming' Structures. Using this structure, you can select a part of your block diagram to disable and switch to the active state of wire through the or add different features that will run. Hope this helps and good luck!

• HELP Please with Windows Mail

  I tried for 5 hours now to configure Windows Mail on my laptop.  I contacted windows chat support and they were no help.  I would like to see the email in my AOL email account in my mailbox Windows.

  According to AOL:

  'The incoming (POP) mail server address's imap.aol.com and imap.aim.com for IMAP and pop.aol.com or pop.aim.com for POP3.

  The address of the outgoing (SMTP) mail server is smtp.aol.com or smtp.aim.com, port: 587. »

  In Windows Mail, I clicked on the accounts and entering, I pasted "pop.aol.com" so leaving, I pasted "smtp.aol.com".  Then, I went to properties and under the advance of the tap which is written "outgoing (SMTP) mail:" I typed "587".

  My AOL emails are coming thanks to perfect, but when I try to send an email through Windows Mail I get the following error message:

  "The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was ' * address email is removed from the privacy *'. ' Subject 'in progress test', account: 'pop.aol.com', server: 'smtp.aol.com', Protocol: SMTP, server response: 553 5.7.1 <*** email="" address="" is="" removed="" for="" privacy="" ***="">: denied sender address: not connected ', Port: 587, secure (SSL): no, Server error: 553, error number: 0x800CCC79.

  I don't know what else to do!  Can someone please tell me what I'm doing wrong?

  Thank you. Heather

  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  How to configure an AOL e-mail account in Outlook Express and Windows Mail
  http://www.postmaster.AOL.com/IMAP/Express.html

  Bruce Hagen ~ MS - MVP [Mail]

• DV7-1210eo Black Screen with CPU and graphic Error Codes

  I'm running out of ideas on how repair this laptop so I thought I would ask here. Like so many other people with these portable mine seemed to go right after my warranty expires. I went to power on one day and he presented that a directed graph code error with a black screen. Instead of trying to fix the original slide myself I thought it would be best to just replace it. After the new Board of Directors came and I reassembled it all has been great to work for a few days. I went to power on one morning and he presented the same graphics code error as before. I then reset and tried again, but this time that he gave me the CPU error instead, after 15 seconds or later he would begin to switch between error a CPU and graphics. I assumed that the jury who sent was defective, so I sent a replacement. Once the replacement card has been installed it would always give me the same errors, sometimes it would be the graphics and other CPU.

  I was told the jury that I sent worked great and replacement has been tested before it was sent, it even came with the results of the tests to check. I tried to replace the CPU and memory with a work known and same notebook AC adapter, which does not seem to help.

  If anyone has any idea as to what could be the problem I would be acknowledging the entry.

  Thank you

  I want to just update to anyone who seems to have the same problems as me.

  I finally had time to replace the CPU and specifications works fine now. It seems the controller memory on the old CPU came out and was causing memory to not be detected properly and causing graphic errors. Before you spend money on a new motherboard, you may want to consider the processor as the problem.

  Now if only I can figure out how to keep it from cooking itself...

  Thanks for all the help,

  Domo

• HELP PLEASE WITH MY WIRELESS NETWORK CARD CONSTANTLY HAVE TO BE SET

  I have an Acer Aspire 5552-3691 with Atheros AR5B97 wireless adapter. It shows that I have an internet connection, but I have to constantly run network diagnostics it resets then the wireless network adapter and which solves the problem. However, the fix is only short it can last 2 minutes or if I'm lucky 15 but nevertheless it continues to occur. Help, please

  Hello

  Thanks for posting your question in the Microsoft Community forum.

  Refer to this article and let us know the status.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  Thank you.

• Help please with the addition of a Section of the video

  I created a video for a school organization. Have completed a section or scene, I would like to add more scenes before this scene. I know how to add things, but I don't want to start adding videos and pictures and then my audio may not be in the same place. Is it possible to add without the pictures and audio are out of sync? Can I connect the audio to the video? Help, please. Thank you!

  I guess that you do not want audio move with the clip with the fact that it is already synchronized. In this case select the video and the audio clip, right click and select "link Audio and video.

  

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

• Can anyone help please with Javascript. 2 small problems.

  Hello. I created a dynamic PDF form with fields. I have 2 problems that I don't know that someone can help me with. (Someone I can email this PDF on request).

  PROBLEM 1. In this form, I have a table (in fact I think that it is a form of sub) which has 3 buttons associated with it ('Add Row', 'Delete Row' and (line Clear').) A single button adds a new line. It works, but effectively, it duplicates the line (and all the fields/cells of text contained in the line) and this new line at the bottom of any existing lines. What I'm asking, is for this button (the button gets duplicated with the line) to place the new line immediately below the line where it is clicked. That is to say, imagine you open the document, complete line (at this stage it is only) and click on the button 'Add Row '. You now have 2 rows (large), while you complete the second row. Now, here's my problem, if you press the button "Add a line" on the first line, a new 3rd line is added at the bottom and not between line 1 and line 2.

  Actually if you have dozens of lines filled and you need to insert a line of amendment, currently it is impossible without deleting all the lines to the point where you want to check/insert.

  PROBLEM 2. In this line of alphanumeric text, the are two fields (called "Rate" and "Loading") where dollar amounts are entered. As the form is filled (lines can be generated dynamically and there fields filled out manually by the user) there may be potentially dozens of lines in a completed form and, as each line has several fields of alphanumeric text, one can imagine of forming columns once there is more than 1 line. At the end of the form, the totals are automatically calculated. I created a button to reset (clear) all amounts in these two specific areas (columns), but in all ranks. Unfortunately there is something wrong with my script syntax like this button does not. (I want this facility as the end of the form, which is a draft budget, I need to send two copies - one accountants with numbers and logistics and a second copy to another Department that I don't want to give the figures, so I need the key to clear the numbers without having to erase each cell individually).

  Any help that anyone can give would be much appreciated.

  Please send me an email to

  [email protected] If you want I send you the file.

  See you soon

  Bradd

  Send the form to

  [email protected] and I will give it a go... include a reference back to this forum announcement.

  Paul

• help please with Oregon

  Hi, I have a bunch of logos in a file and animate with Oregon, so I create a timer to show (fade in - fade) logos one by one;

  I had already melted all the logos with alpha = 0; but don t an idea on how to call it inside the Oregon function. My all the logos are called logo1, logo2, logo3 etc and I try to create a variable to contain a certain number and them put the first part of the name (logo) + the variable to call the movieclip but it didn t work. Please if someone could help me with this problem.

  This variable contain the 2nd part of the name

  var logoContador:Number = 1;
  var miTimer:Timer = new Timer (3000);
  miTimer.addEventListener (TimerEvent.TIMER, goTimer);
  function goTimer(TimerEvent:Event):void
  {
  Tweener.addTween(logo+logoContador,{alpha:1,time:1,transition:"easeInQuad",});)

  Tweener.addTween (logo + logoContador, {alpha: 0, time: 1, delay: 1.7, transition: "easeInQuad,"});

  logoContador ++

  }
  miTimer.start ();

  I'm not familiar with the help of Tweener, but just before the last brace, you have a comma.  So maybe that's your problem... you have a comma in there too or you are missing the last parameter which must follow the comma.

• help please with tables

  Hi, I was wondering

  If someone could help me, I'am, preparing a catalogue and in illustrator and I'm importing text from the word which also has tables in it. I can't be able to change the tables somewhat.

  also if anyone has any tips for a faster workflow (using the text tools) please let me know.

  Thank you

  The dividers are just lose their outline color, they are always there and you simply select them and give them a weight you want.

  You can also do something of a trace of the rectangle. Then go to split object in grid with no gutters for the exposed cells that make a rectangle and place it on top and which divided into a grid similarly but with gutters and then convert these paths to text blocks.

• Help please with a printer.

  I use an HP laserjet M1212nf MFP printer. I have recently upgraded to Windows 8 to 8.1. Now, the printer keeps going through a phaze "during initialization... "and will not respond. I have re-defined, transformed extinguished/turned on and I'm perplexed as to what to do next. After that he goes through a couple of cycles, it will sit in the "Ready" mode for a few minutes and then restart the "Intializing. If I'm lucky, I can get it to print only after after the second or third print command was sent.

  Hi obscured.

  I see by your post, after the update to Windows 8.1 the printer keeps initializing and then sometimes appear after giving the command to print a couple of times. I can help you with this problem.

  I'd do a power reset to see if that will solve the problem.

  When the printer is still lit, disconnect the power cable from the back of the printer.

  Then, disconnect the power cable from the wall outlet.

  Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Just to rule out a hardware problem, try and print a self-test on the printer hardware to see if it is a hardware or software problem. Unplug all cables from the printer except the power cord.

  Restart the printer. Printing of Pages of information. Go to the section for M1210 / M1218nfs series.

  Then, you can reconnect the cables again.

  I would like to know if the test of the material printed.

  Since the upgrade you uninstall and reinstall the printer software?

  If you do not, then I would like to see if this will solve the problem.

  Uninstalling the printer software.

  HP LaserJet Pro M1212nf MFP drivers.

  If you're still having problems, then go through the steps described in this document.

  Print jobs are stuck in the print queue.

  How is the printer connected? (USB/Ethernet)

  I would like to know how it goes for you!

  Good day!
  Thank you.

• Help please with flash CS4!

  Hello, I'm at school and I have a mission to fulfil on flash, but when I try to make an object, a little boring box appears around my object instead of having nothing around him, I spend it for nothing and tried to use the selection tool, but then it didn't go all graph as it should be, and instead This box is back.  Ignored, even once, I tried to use the BONE tool, but it only works on a single shape, and he's not going to others to link!  This is what looks like the box on the object and it's really frustrating me.  Help, please!

  You have selected the tool "object drawing". In your toolbar to the bottom, there is a button that is just a circle (go over it and it will say "drawing object" (it's under your color palette paint COP and above the fill lock button.) Provide your sounds like mine! Just click on this issue and it will switch the drawing of the object on and outside. You can break apart objects that you have already established as objects by selecting the form and pressing 'cmd' + 'B' (ctrl + b on a pc)