Help please with Script report :(

Similar Questions

• Can anyone help please with Javascript. 2 small problems.

  Hello. I created a dynamic PDF form with fields. I have 2 problems that I don't know that someone can help me with. (Someone I can email this PDF on request).

  PROBLEM 1. In this form, I have a table (in fact I think that it is a form of sub) which has 3 buttons associated with it ('Add Row', 'Delete Row' and (line Clear').) A single button adds a new line. It works, but effectively, it duplicates the line (and all the fields/cells of text contained in the line) and this new line at the bottom of any existing lines. What I'm asking, is for this button (the button gets duplicated with the line) to place the new line immediately below the line where it is clicked. That is to say, imagine you open the document, complete line (at this stage it is only) and click on the button 'Add Row '. You now have 2 rows (large), while you complete the second row. Now, here's my problem, if you press the button "Add a line" on the first line, a new 3rd line is added at the bottom and not between line 1 and line 2.

  Actually if you have dozens of lines filled and you need to insert a line of amendment, currently it is impossible without deleting all the lines to the point where you want to check/insert.

  PROBLEM 2. In this line of alphanumeric text, the are two fields (called "Rate" and "Loading") where dollar amounts are entered. As the form is filled (lines can be generated dynamically and there fields filled out manually by the user) there may be potentially dozens of lines in a completed form and, as each line has several fields of alphanumeric text, one can imagine of forming columns once there is more than 1 line. At the end of the form, the totals are automatically calculated. I created a button to reset (clear) all amounts in these two specific areas (columns), but in all ranks. Unfortunately there is something wrong with my script syntax like this button does not. (I want this facility as the end of the form, which is a draft budget, I need to send two copies - one accountants with numbers and logistics and a second copy to another Department that I don't want to give the figures, so I need the key to clear the numbers without having to erase each cell individually).

  Any help that anyone can give would be much appreciated.

  Please send me an email to

  [email protected] If you want I send you the file.

  See you soon

  Bradd

  Send the form to

  [email protected] and I will give it a go... include a reference back to this forum announcement.

  Paul

• Help please with BSOD

  BSOD desktop computer:

  "The problem seems to be caused by the following file: TDI." SYS PAGE_FAULT_IN_NONPAGED_AREA technical information: STOP: 0 x 00000050 0xB9F6A1D0, 0 x 00000001 0xB9c5of4A TDI 0x00000000. SYS address B9c5of4A base at B9c50000, Date Stamp 48025834 physical memory dump complete. »

  What should do?

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow the instructions for posting at this link

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

• HELP PLEASE WITH MY WIRELESS NETWORK CARD CONSTANTLY HAVE TO BE SET

  I have an Acer Aspire 5552-3691 with Atheros AR5B97 wireless adapter. It shows that I have an internet connection, but I have to constantly run network diagnostics it resets then the wireless network adapter and which solves the problem. However, the fix is only short it can last 2 minutes or if I'm lucky 15 but nevertheless it continues to occur. Help, please

  Hello

  Thanks for posting your question in the Microsoft Community forum.

  Refer to this article and let us know the status.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  Thank you.

• Help please with the addition of a Section of the video

  I created a video for a school organization. Have completed a section or scene, I would like to add more scenes before this scene. I know how to add things, but I don't want to start adding videos and pictures and then my audio may not be in the same place. Is it possible to add without the pictures and audio are out of sync? Can I connect the audio to the video? Help, please. Thank you!

  I guess that you do not want audio move with the clip with the fact that it is already synchronized. In this case select the video and the audio clip, right click and select "link Audio and video.

  

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

• help please with Oregon

  Hi, I have a bunch of logos in a file and animate with Oregon, so I create a timer to show (fade in - fade) logos one by one;

  I had already melted all the logos with alpha = 0; but don t an idea on how to call it inside the Oregon function. My all the logos are called logo1, logo2, logo3 etc and I try to create a variable to contain a certain number and them put the first part of the name (logo) + the variable to call the movieclip but it didn t work. Please if someone could help me with this problem.

  This variable contain the 2nd part of the name

  var logoContador:Number = 1;
  var miTimer:Timer = new Timer (3000);
  miTimer.addEventListener (TimerEvent.TIMER, goTimer);
  function goTimer(TimerEvent:Event):void
  {
  Tweener.addTween(logo+logoContador,{alpha:1,time:1,transition:"easeInQuad",});)

  Tweener.addTween (logo + logoContador, {alpha: 0, time: 1, delay: 1.7, transition: "easeInQuad,"});

  logoContador ++

  }
  miTimer.start ();

  I'm not familiar with the help of Tweener, but just before the last brace, you have a comma.  So maybe that's your problem... you have a comma in there too or you are missing the last parameter which must follow the comma.

• NB100 help please with fan and graphics settings

  Hi, I just bought the NB100 and have a few questions, I hope someone can help me with.
  The fan icon goes grey or white according to the parameters by using FN and F6, but I can't feel any difference in the air around the grid on the right. It is on when the icon shows white or gray? Does really?
  My second question is about the graphics settings. The intel power option that appears when the icon in the taskbar graphivs is double clicked seems to be disabled. There are automatic brightness sliders and energy saving, but none can be selected, how is it permits?
  My last question is about the games. I tried a few alumni who were not graphic intensive, Deus Ex and the sins of a solar empire, but I had problems in the text boxes that require a response, and in the case of Deus Ex, they say that the graphics drivers are not compatible. Has anyone got Ant with games? I travel a lot and thinking, I want to have one or two other than playing cards installed etc.

  Thanks and regards, Brian

  On my machine that F6 is to mute sound, F8 is for the cooling fan. Based on this fact the fan speed change.
  I can't help with the power settings, like mine all seem to work OK and I can make changes.
  Have you tried changing the settings through preferences/system/Power Management?

• Help please with a printer.

  I use an HP laserjet M1212nf MFP printer. I have recently upgraded to Windows 8 to 8.1. Now, the printer keeps going through a phaze "during initialization... "and will not respond. I have re-defined, transformed extinguished/turned on and I'm perplexed as to what to do next. After that he goes through a couple of cycles, it will sit in the "Ready" mode for a few minutes and then restart the "Intializing. If I'm lucky, I can get it to print only after after the second or third print command was sent.

  Hi obscured.

  I see by your post, after the update to Windows 8.1 the printer keeps initializing and then sometimes appear after giving the command to print a couple of times. I can help you with this problem.

  I'd do a power reset to see if that will solve the problem.

  When the printer is still lit, disconnect the power cable from the back of the printer.

  Then, disconnect the power cable from the wall outlet.

  Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Just to rule out a hardware problem, try and print a self-test on the printer hardware to see if it is a hardware or software problem. Unplug all cables from the printer except the power cord.

  Restart the printer. Printing of Pages of information. Go to the section for M1210 / M1218nfs series.

  Then, you can reconnect the cables again.

  I would like to know if the test of the material printed.

  Since the upgrade you uninstall and reinstall the printer software?

  If you do not, then I would like to see if this will solve the problem.

  Uninstalling the printer software.

  HP LaserJet Pro M1212nf MFP drivers.

  If you're still having problems, then go through the steps described in this document.

  Print jobs are stuck in the print queue.

  How is the printer connected? (USB/Ethernet)

  I would like to know how it goes for you!

  Good day!
  Thank you.

• Help please with flash CS4!

  Hello, I'm at school and I have a mission to fulfil on flash, but when I try to make an object, a little boring box appears around my object instead of having nothing around him, I spend it for nothing and tried to use the selection tool, but then it didn't go all graph as it should be, and instead This box is back.  Ignored, even once, I tried to use the BONE tool, but it only works on a single shape, and he's not going to others to link!  This is what looks like the box on the object and it's really frustrating me.  Help, please!

  You have selected the tool "object drawing". In your toolbar to the bottom, there is a button that is just a circle (go over it and it will say "drawing object" (it's under your color palette paint COP and above the fill lock button.) Provide your sounds like mine! Just click on this issue and it will switch the drawing of the object on and outside. You can break apart objects that you have already established as objects by selecting the form and pressing 'cmd' + 'B' (ctrl + b on a pc)

• Someone help please with the eyre audit report?

  EtreCheck version: 2.9.10 (261)

  Report generated 2016-04-08 21:36:12

  Download EtreCheck from https://etrecheck.com

  Time 02:45

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click [delete] to remove the adware.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 785

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X Mavericks 10.9.5 (13F34) - since startup time: less than an hour

  Disc information: ⓘ

  HTS547550A9E384 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 (Go 460,16 free) - 36 errors

  Drive failure!

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  ~/Library/Caches/com. Apple.Safari/extensions/Omnibar.safariextension

  ~/Library/Caches/com. Apple.Safari/extensions/Searchme-2.safariextension

  ~/Library/LaunchAgents/cinema-plus-1-1.ver

  ~/Library/LaunchAgents/cinema-plus-1-1_enabler.plist

  ~/Library/LaunchAgents/cinema-plus-1-1_updater.plist

  found 5 adware files. [Remove]

  Kernel extensions: ⓘ

  / Library/Extensions

  [loading] com.symantec.nfm.kext (6.4.1f36 - SDK 10.9-2016-03-30) [Support]

  / System/Library/Extensions

  [loading] com.symantec.internetSecurity.kext (6.4f36 - SDK 10.8 - 2016-03-30) [Support]

  [loading] com.symantec.ips.kext (6.4f36 - SDK 10.8 - 2016-03-30) [Support]

  com.wibu.codemeter.CmUSBMassStorage [no charge] (1.0.7 - 2016-03-30) [Support]

  Launch system officers: ⓘ

  [loaded] 5 tasks of Apple

  [loading] 142 tasks Apple

  [operation] 37 tasks Apple

  Launch system demons: ⓘ

  [failure] com.wibu.CodeMeter.Server.plist (2013-11-15) [Support]

  [loaded] 50 jobs Apple

  [loading] 140 tasks Apple

  [operation] 59 tasks Apple

  Launch officers: ⓘ

  [loading] com.symantec.errorreporter - periodicagent.NFM.plist (2015-09-28) [Support]

  [operation] com.symantec.uiagent.application.NFM.plist (2015-09-11) [Support]

  [loading] org.gpgtools.Libmacgpg.xpc.plist (2015-09-23) [Support]

  [loading] org.gpgtools.gpgmail.enable - bundles.plist (2015-03-08) [Support]

  [loading] org.gpgtools.gpgmail.patch - uuid - user .plist (2015-03-08) [Support]

  [loading] org.gpgtools.gpgmail.updater.plist (2015-09-23) [Support]

  [loading] org.gpgtools.macgpg2.fix.plist (2015-03-08) [Support]

  [market] org.gpgtools.macgpg2.shutdown - gpg - agent.plist (2015-03-08) [Support]

  [loading] org.gpgtools.macgpg2.updater.plist (2015-03-08) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-03-07) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2016-04-08) [Support]

  [failure] com.symantec.SymLUHelper.NFM.plist (2015-09-11) [Support]

  [loading] com.symantec.UninstallerToolHelper.plist (2015-04-21) [Support]

  [operation] com.symantec.deepsight - extractor.NFM.plist (2014-09-10) [Support]

  [loading] com.symantec.errorreporter - periodic.NFM.plist (2015-09-28) [Support]

  [failure] com.symantec.liveupdate.daemon.NFM.plist (2015-09-11) [Support]

  [operation] com.symantec.sharedsettings.NFM.plist (2015-09-11) [Support]

  [operation] com.symantec.symdaemon.NFM.plist (2015-09-11) [Support]

  org.eyebeam.SelfControl.plist [no charge] (2014-12-26) [Support]

  [loading] org.gpgtools.gpgmail.patch - uuid.plist (2015-03-08) [Support]

  User launch officers: ⓘ

  [no charge] cinema-more-1 - 1.ver (2014-10-28) Adware! [Remove] 

  [failure] cinema-more-1 - 1_enabler.plist (2014-11-06) Adware! [Remove] 

  [loading] cinema-more-1 - 1_updater.plist (2014-11-06) Adware! [Remove] 

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist (2014-10-17) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  iTunesHelper UNKNOWN (missing value)

  uTorrent UNKNOWN (missing value)

  Genieo UNKNOWN (missing value)

  TuneupMyMac UNKNOWN (missing value)

  Other applications: ⓘ

  [ongoing] com.etresoft.EtreCheck.70432

  [loading] 442 tasks Apple

  [operation] 284 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 21.0.0.182 - SDK 10.6 (2016-03-10) [Support]

  QuickTime Plugin: 7.7.3 (2015-01-30)

  Flash Player: 21.0.0.182 - SDK 10.6 (2016-03-10) obsolete! Update

  Default browser: 537 - SDK 10.9 (2015-01-30)

  Silverlight: 5.1.40728.0 - SDK 10.6 (2015-08-24), [Support]

  NortonInternetSecurityBF: 6.4 - SDK 10.9 (2015-09-28) [Support]

  JavaAppletPlugin: 14.9.0 - 10.7 (2014-09-07) check the version of the SDK

  User Plug-ins internet: ⓘ

  CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]

  Safari extensions: ⓘ

  Norton Security (2016-02-11)

  Searchme (cache only) (2015-11-08) Adware! [Remove] 

  Omnibar (cache only) (2015-02-23) Adware! [Remove] 

  AdBlock (2016-03-18)

  3rd party preference panes: ⓘ

  CodeMeter (2013-11-15) [Support]

  Flash Player (2016-03-07) [Support]

  GPGPreferences (2016-01-04) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% fontd

  3% kernel_task

  3% WindowServer

  0% com.apple.WebKit.WebContent

  0% aosnotifyd

  Top of page process of memory: ⓘ

  Kernel_task 483 MB

  315 MB SymDaemon

  PluginProcess 217 MB

  180 MB Safari

  Mds_stores 94 MB

  Virtual memory information: ⓘ

  1.04 Go free RAM

  2.96 used GB RAM (1.34 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  April 8, 2016, Self test - 21:17:24

  Hello Chocbar648,

  Your hard drive may be faulty.

  You do not have a backup.

  You have adware.

  You must:

  (1) buy an external hard drive and make a Time Machine backup

  (2) use EtreCheck to remove your adware and perform another backup.

  (3) get rid of the antivirus software which obviously does you no good.

  (4) operate your machine for a week or two. Then run another EtreCheck. If you have disk errors, then you should get your hard drive replaced. It is possible that your antivirus is causing these errors.

  (5) If you continue to encounter disk errors, download your hard drive replaced in an Apple Store or Service Center authorized Apple. I suggest a Service authorised Apple Centre and see if they update your RAM and give you an SSD too. You don't need really to do with the Mavericks, but if you want to go to Yosemite or El Capitan, you'll thank me. Given that you need to open the machine

• Help with script Reporting vSwitch

  Hi, looking for a little help to report on the vSwitches.

  The script I've tried to write is shown below, but of course I messed up that it returns only the host names and my column headings.

  Any help really appreciated and pointers where I was wrong.

  Thank you

  Dan

  $vSwitchRep = @)
  $vmhosts = get-VMHost | Name sort
  ForEach ($vmhost to $vmhosts)
  {
  $vSwitchObj = "" | Select the host name, vSwitch, vmnic, TotalPorts, PortsAvailable, MTU
  $vSwitchObj.HostName = $vmhost. Name
  
  ForEach ($vswitch in $vmhost. VirtualSwitch)
  {
  $vSwitchObj.vSwitch = $vmhost. VirtualSwitch.Name
  $nic = «»
  ForEach ($vmnic in $vmhost. VirtualSwitch.nic)
  {
  $nic += $vmnic
  }
  $vSwitchObj.vmnic = $vmnic
  $vSwitchObj.TotalPorts = $vmhost. VirtualSwitch.NumPorts
  $vSwitchObj.PortsAvailable = $vmhost. VirtualSwitch.NumPortsAvailable
  $vSwitchObj.MTU = $vmhost. VirtualSwitch.Mtu
  $vSwitchRep += $vSwitchObj
  }
  }
  $vSwitchRep

  You're right, it was an error for the vmnic.

  Try this way

  $vSwitchRep = @()
  $vmhosts = Get-VMHost | Sort Nameforeach($vmhost in $vmhosts)
  {
      foreach($vswitch in (Get-VirtualSwitch -VMHost $vmhost))
      {
          $vSwitchObj = "" | Select HostName, vSwitch, vmnic, TotalPorts, PortsAvailable, MTU        $vSwitchObj.HostName = $vmhost.Name
          $vSwitchObj.vSwitch = $vswitch.Name
          $vSwitchObj.vmnic = [string]::Join(',',$vswitch.nic)
          $vSwitchObj.TotalPorts = $vswitch.NumPorts
          $vSwitchObj.PortsAvailable = $vswitch.NumPortsAvailable
          $vSwitchObj.MTU = $vswitch.Mtu
          $vSwitchRep += $vSwitchObj    }
  }
  $vSwitchRep
  

• Need help please this script... LucD? :-)

  Everything works as expected, but I have a problem with the two parts of the script. They are the bits where he itterates the NETWORK card and hard drives (pink and blue sections below).

  Problem with the NIC (Pink) loop - it only shows nic 0, and if there are multiple network cards - they are not out in the CSV file. Also returns only 0 NETWORK adapter MAC address and not the other nic MAC addresses...

  Problem with loop (blue) disc - it returns only the first TWO discs even if some of my VM 4 or even 5 discs...

  No idea why this is happening. This script is not my work, but I found it very useful for what I need...

  Script:

  Claire
  

  $VirtualCenter = Read-Host "Enter the Virtual Center server name".

  $FileLocation = Read-Host "Please Enter full Path and file name to save the output.  Must end in .csv or .txt.
  

  $Cred = get-Credential
  

  SE connect-VIServer $VirtualCenter - Credential $Cred
  

  $stats = @)

  #Uncomment the two lines if you want to inventory just a cluster instead of all the VMS in vCenter
  

  #$VMCluster = Read-Host "Please enter the name of the Cluster.
  

  #$ServerList = get-VM-location $VMCluster

  #If the two given lines are deleted, then comment out the following line
  

  $ServerList = get - VM

  {Foreach ($Guests to $ServerList)
  

  $Guest = $Guests.Name.ToUpper)
  

  Write-Progress-activity "Create VMware Guest Inventory" - Status "Treatment VM guest $Guest" # display progress bar
  

  $VMGuest = get - VM $Guest | Get-View
  

  $VM = get - VM $Guest
  

  $ESXHost is (get - VM $Guest). Host.Name.ToUpper)
  

  $VMHost = get-vmhost $ESXHost | Get-View

  $row = new-Object System.Object
  

  $row | Add-Member-Type NoteProperty-name 'Guest' - value $VMGuest.Name.ToUpper)
  

  $row | Add-Member-Type NoteProperty - name "Power status" - value $VM. Guest.State
  

  $row | Add-Member-Type NoteProperty - Name "Guest OS full name"-value $VM. Guest.OSFullName
  

  $row | Add-Member-Type NoteProperty-name "Comments RAM (MB)" - value $VM. MemoryMB
  

  $row | Add-Member-Type NoteProperty - Name 'Comments vCPU Count' - value $VM. NumCPU
  

  $row | Add-Member-Type NoteProperty - name "Guest VMTools status" - value $VMGuest.Guest.ToolsStatus
  

  $row | Add-Member-Type NoteProperty-name "Guest VMTools Version" - value $VMGuest.Guest.ToolsVersion
  

  $row | Add-Member-Type NoteProperty - name 'Guest status VMTools Version' - value $VMGuest.Guest.ToolsVersionStatus
  

  $row | Add-Member-Type NoteProperty - name "Comments VMTools status running" - value $VMGuest.Guest.ToolsRunningStatus
  

  
  

  $NICCount = 0
  

  ForEach ($vNic in $VM. Guest.Nics) {}

  
  

  $NIC_IP = "Guest IP Address for the NETWORK adapter" + $NICCount + "."
  

  $NIC_MAC = "MAC address of Guest for the NETWORK adapter" + $NICCount + "."
  

  $NIC_vSwitch = "Guest vSwitch network for the NETWORK adapter" + $NICCount + "."
  

  $row | Add-Member-Type NoteProperty - name $NIC_IP-$VMGuest.Guest.IpAddress value
  

  $row | Add-Member-Type NoteProperty - name $NIC_MAC-$vNic.MacAddress value
  

  $row | Add-Member-Type NoteProperty - name $NIC_vSwitch-$vNic.NetworkName value
  

  $NICCount ++
  

  }

  $DiskCount = 0
  

  $DT = @)
  

  ForEach ($vDisk in $VM. Guest.Disks) {}
  

  $DriveLetter = 'Comments Drive' + $DiskCount + ' ".
  

  $DriveSize = 'Comments Drive' + $DiskCount + 'size '.
  

  $DriveFree = 'Comments Drive' + $DiskCount + 'free space '.
  

  $vDiskCap = [math]: Round (($vDisk.Capacity)/1 GB)
  

  $vDiskFree = [math]: Round (($vDisk.FreeSpace)/1 GB)
  

  $row | Add-Member-Type NoteProperty - name $DriveLetter-$vDisk.Path value
  

  $row | Add-Member-Type NoteProperty-name $DriveSize - value $vDiskCap
  

  $row | Add-Member-Type NoteProperty-name $DriveFree - value $vDiskFree
  

  $DiskCount ++
  

  $DriveTotals = "" + $row. $DriveLetter + "" + $row. $DriveSize + ';
  

  $DT += $DriveTotals
  

  }

  
  

  $row | Add-Member-Type NoteProperty - Name 'Host name' - value $VMHost.Summary.Config.Name.ToUpper)
  

  $row | Add-Member-Type NoteProperty - name 'number of Sessions on the host' - value $VMHost.vm.Count
  

  $row | Add-Member-Type NoteProperty - Name "Is a member of the host Cluster" - value (Get-Cluster - VMHost $ESXHost). Name.ToUpper)
  

  $row | Add-Member-Type NoteProperty - name "Hosting provider" - value $VMHost.Hardware.SystemInfo.Vendor
  

  $row | Add-Member-Type NoteProperty - name 'Model home' - value $VMHost.Hardware.SystemInfo.Model
  

  $HostRam = [math]::Round(($VMHost.Summary.Hardware.MemorySize)/1Go)
  

  $row | Add-Member-Type NoteProperty - name 'RAM to host' - value $HostRam
  

  $row | Add-Member-Type NoteProperty - name "CPU model of home" - value $VMHost.Summary.Hardware.CpuModel
  

  $row | Add-Member-Type NoteProperty - name 'number of CPU host' - value $VMHost.Summary.Hardware.NumCpuThreads
  

  $row | Add-Member-Type NoteProperty - name 'The host CPU speed' - value $VMHost.Summary.Hardware.CpuMhz
  

  $row | Add-Member-Type NoteProperty - Name 'Name of the product to home' - value $VMHost.Summary.Config.Product.Name
  

  $row | Add-Member-Type NoteProperty - name 'Version of the product to home' - value $VMHost.Summary.Config.Product.Version
  

  $row | Add-Member-Type NoteProperty - name of the Generation of product to home' - value $VMHost.Summary.Config.Product.Build
  

  $row | Add-Member-Type NoteProperty - name of the "Service Console to host" - value $VMHost.Config.Network.ConsolevNic [0]. Spec.IP.IPAddress
  

  $row | Add-Member-Type NoteProperty - name "the subnet mask of Console Hosting Service" - value $VMHost.Config.Network.ConsolevNic [0]. Spec.IP.SubnetMask
  

  $row | Add-Member-Type NoteProperty - name of the "Service Console 1 to host" - value $VMHost.Config.Network.ConsolevNic [1]. Spec.IP.IPAddress
  

  $row | Add-Member-Type NoteProperty - name "the subnet mask of Console 1 Hosting Service" - value $VMHost.Config.Network.ConsolevNic [1]. Spec.IP.SubnetMask
  

  $row | Add-Member-Type NoteProperty - Name "vMotion Host IP Address" - value $VMHost.Config.vMotion.IPConfig.IpAddress
  

  $row | Add-Member-Type NoteProperty - Name "VMotion the subnet mask of the host" - value $VMHost.Config.vMotion.IPConfig.SubnetMask
  

  
  

  $stats += $row
  

  
  

  
  

  }
  

  $stats | Export-Csv-Force. \$FileLocation - NoTypeInformation
  

  Invoke-Item. \$FileLocation

  Thanks for your help

  PS. I'm a complete NOOB with Powercli, so try to find my way around it yet.

  PPS - if someone has a better VM inventory script - please be so kind as to pointing me to it...
  

  Thought as well, but I'm afraid he wil cover the possibilities.

  Assume the following:

  VM1, 3 cards, 2 hard drives

  VM2, 2 cards, 5 hard drives

  The order will be VM1, VM2 with the effect that you get 2 hard drives for VM2.

  The alternative I came with us to make Dummy entries and always use the maximum columns for network cards and hard drives.

  If you want to get

  NIC1 NIC2, NIC3 HD1 HD2 HD3 HD4 HD5

  VM1 x x x x x na na na

  VM2 x x na x x x x x

  See if it works for you.

• Help please with two extremes and DNS

  Hello

  I hope someone can help.

  My setup

  Modem-router ADSL with WiFi turned off >

  Airport extreme connected by ethernet to the Modem/Router - create a wireless network, a static IP - Bridge Mode - >

  Airport extreme connected by ethernet to the Airport extreme - create a wireless - Mode Bridge >-static IP address

  Both now have the status message - "no DNS - this Airport base station does´t server have a DNS server address and could have problems connecting to the Internet."  If the airport is in Bridge Mode is necessary enter the DNS server (no shows at what time the DHCP value)? I should give him the address of the modem/router or real DNS I see in my modem/router settings?

  Also the WiFi mode extend a wireless network is only fair for multiple extremes that extend wireless (No ethernet cable)?

  Thank you

  Turning off the modem/router

  Power off each AirPort Extreme

  Wait a minute

  Turn on the modem/router and let it run for a minute

  Put on single AirPort Extreme and check its status

  If the first AirPort Extreme looks good, the second turns on and check its status

  Report on the results

  If you're still having problems...

  The two extremes of the airport are working properly in the past... and this problem appeared just... or... is that what you are having trouble with a new configuration?

  When you say that every AirPort Extreme has a static IP address, this means that each AirPort Extreme has been configured to request a specific IP address... or... does that mean that you have configured your modem/router to provide a specific IP address for each AirPort Extreme?

  If you check the settings for each AirPort Extreme... each of them receives the static IP address that the router/modem is the assignment?

• I can't open the pictures and need help please with my Windows Vista and the WindowsLivePhotogallery error Code: 0x8007007e. Carole

  I have a Windows Vista laptop with many pictures.  I can not open the photos on my Windows Live Photo gallery and have received

  Error code: 0x8007007e.

  How this can be solved?

  Thank you.  Carole

  This forum is for Microsoft Security Essentials.

  Please go to the Windows Live forum to get help.

  http://windowslivehelp.com/

• Help please with activation Windows 7 Ultimate

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - YG69F - 9M66D-PMJBM
  The Windows Product Key hash: /kehptF9HHVxM5d8dUnqgcfndXw =
  Windows product ID: 00426-OEM-8992662-00497
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {EE03DAFD-32AD-4E14-924F-7543E2188F7B} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {EE03DAFD-32AD-4E14-924F-7543E2188F7B}1.9.0027.06.1.7601.2.00010100.1.0.001x 32*-*-*-*-PMJBM00426-OEM-8992662-004972S-1-5-21-2123413609-939570136-1929719789LENOVOINVALID LENOVO06CN23WW20071120000000.000000 + 000C84E3C07018400FA04090409Time(GMT-05:00) Standard is03LENOVOOC-01 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00178-926-600497-02-1033-7601.0000-0892014
  Installation ID: 005866752352909303589724730663050175385105068962172762
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: PMJBM
  License status: Notification
  Notification reason: 0xC004F063.
  Remaining Windows rearm count: 4
  Trust time: 12:11:12 11/04/2014

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C532
  Beyond: 0 x 0000000000000000
  Event timestamp: 3:24:2014 23:41
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: OAAAAAEABQABAAIAAAABAAAAAwABAAEAJJTA2KpQDI0GDEpRRoPKsQavrPNSM9pKmsYqPtQVKoU =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO OEMAPIC
  FACP LENOVO OC-01
  HPET LENOVO OEMHPET
  LENOVO OEMBOOT BOOT
  MCFG LENOVO OEMMCFG
  SLIC LENOVO OC-01
  CO-SUBMISSION LENOVO OEMECDT
  LASRYVITRAGE LENOVO AMI_OEM
  GSCI LENOVO GMCHSCI
  OEMATKG A_M_I_ ATKG
  SSDT PmRef CpuPm

  Separated by the moderator of this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/getting-a-Windows-7-not-genuine-pop-up/d464798a-4A9B-447A-89dd-241feeb19395#LastReply

  You buy a genuine Windows 7 license. The copy of Windows 7 Ultimate, you have installed is an OEM SLP license that should only be preloaded with a new PC. You seem to have installed a copy of Windows 7 Ultimate that uses an activation exploit that bypasses the product activation.

  We know that it is because the BIOS date:

  20071120000000.000000 + 000

  Windows 7 was released in 2009, the date of your BIOS says 2007, which means probably that your system is provided with Windows Vista or Windows XP.

  In addition, he is a well known Windows 7 Ultimate license which has been used all over the web:

  Windows product key: *-* - YG69F - 9M66D-PMJBM

  Do a search on the web.

  Thus, you must either charge your version of Windows that came on your computer (Vista or XP) or consider purchasing a license of Windows 7 genuine.