Help required to combine the output in CSV
I am running the script below to collect some of the properties of the virtual machine and it displays the output to the screen, I would like to export to the CSV file
$vms = get - VM
write "VM with the Active Snapshots:
foreach ($vm in $vms | where {$_ |}) Get-Snapshot}) {}
write to $vm.name
}
write "VMware tools obsolete.
foreach ($vm in $vms | where {$_.}) {ExtensionData.Guest.ToolsStatus - eq "toolsOld"})
write to $vm.name
}
write "VM with CD-ROM Connected:
foreach ($vm in $vms | where {$_ |}) Get-CDDrive. where {$_.} {ConnectionState.Connected - eq 'true'}})
write to $vm.name
}
write "VM with floppy connected:
foreach ($vm in $vms | where {$_ |}) Get-FloppyDrive | where {$_.} {ConnectionState.Connected - eq 'true'}})
write to $vm.name
}
Write "VM with limits.
Get - VM | Get-VMResourceConfiguration | Where-Object {$_.} CpuLimitMhz - don't '-1' - or $_.» MemLimitMB - no "{-1} | Select-Object VM
write "VM created over the last 24 hours:
Get-VIEvent - maxsamples 10000 - Start (Get-Date). AddDays(-1) |
where {$_.} GetType(). Name - eq "VmRemovedEvent"} |
Select @{N = "VM"; E={$_. VM name}}, user name
write "removed from the virtual machine in the last 24 hours:
Get-VIEvent - maxsamples 10000 - Start (Get-Date). AddDays(-1) |
where {$_.} GetType(). Name - eq "VmCreatedEvent" - or $_. GetType(). Name - eq "VmBeingClonedEvent" - and $_. GetType(). Name - eq "VmBeingDeployedEvent"} |
Select @{N = "VM"; E={$_. VM name}}, user name
You are looking for the following output:
Properties | Nom VM |
---|---|
VM with the Active Snapshots | VM1, Vm2 |
Exceeded the VMware tools | VM3 Vm4 |
VM with connected Floppy | VM5, Vm6 |
VM with limits | Vitavm9, Vm8 |
VM created in the last 24 hours: | VM1 Vm2 by User2, user1 by |
Thank you!!
Try like this
$report = @() $vms = Get-VM $report += New-Object PSObject -Property @{ Properties = "VM's with Active Snapshots" "VM name" = &{ $result = $vms | where {$_ | Get-Snapshot} | %{$_.Name} if($result){ [string]::Join(',',$result) } }} $report += New-Object PSObject -Property @{ Properties = "VMware tools outdated" "VM name" = &{ $result = $vms | where {$_.ExtensionData.Guest.ToolsStatus -eq "toolsOld"} | %{$_.Name} if($result){ [string]::Join(',',$result) } }} $report += New-Object PSObject -Property @{ Properties = "VM's with Floppy Connected" "VM name" = &{ $result = $vms | where {$_ | Get-FloppyDrive | where { $_.ConnectionState.Connected -eq "true"}} | %{$_.Name} if($result){ [string]::Join(',',$result) } }} $report += New-Object PSObject -Property @{ Properties = "VM's with Limits" "VM name" = &{ $result = Get-VMResourceConfiguration -VM $vms | Where-Object {$_.CpuLimitMhz -ne '-1'-Or $_.MemLimitMB -ne '-1'} | %{$_.VM.Name} if($result){ [string]::Join(',',$result) } }} $report += New-Object PSObject -Property @{ Properties = "VM's Created in Last 24 hours:" "VM name" = &{ $result = Get-VIEvent -MaxSamples ([int]::MaxValue) -Start (Get-Date).AddDays(-1) | where {$_.Gettype().Name -eq "VmCreatedEvent" -or $_.Gettype().Name -eq "VmBeingClonedEvent" -or $_.Gettype().Name -eq "VmBeingDeployedEvent"} | %{"{0} created by {1}" -f $_.VM.Name,$_.UserName} if($result){ [string]::Join(',',$result) } }} $report | Select Properties,"VM name" | Export-Csv report.csv -NoTypeInformation -UseCulture
I've included the tests to avoid errors with the Join function
Tags: VMware
Similar Questions
-
Hello
I have 6 scripts (written by Luke and Robert) who are used to extract information of the box of ESX as shown below. I want to combine the scripts into a single and output in excel. I have a csv file with names of servers esx in it. The combined script should take the entry of the name of the csv esx server and run these scripts and export information to an excel spreadsheet. I need a workbook with each server esx excel as a table in it.
ESX - report.ps1-> extract info from esx host
VM - report.ps1-> extract info VM
Teddy - report.ps1-> extract info ESX physical network adapter
PortGroup - report.ps1-> extract portgroup info
scsiHBA - report.ps1-> extract info SCSI & HBA
Report.ps1-> info report data store retrieves data store
Firewall - report.ps1-> need to be written (gave joint excel spreadsheet format)
Time servers - report.ps1-> need to be written (gave joint excel spreadsheet format)
DNSserver - report.ps1-> need to be written (gave joint excel spreadsheet format)
I have attached the format of the expected output excel workbook and scripts.
Thanks in advance!
There was a bug in the script, the Get-View in the teddy bear (report 3) and the portgroup (report 4) not took into account that the mode of VIServer ran in "multi".
Which should be fixed in the new version attached.
The new version also includes the name of ESX for the reports, 7, 8 and 9.
____________
Blog: LucD notes
Twitter: lucd22
-
Help required to query the fields of the shuttle to Table?
Hi Experts,
My needs:
1. According to the Ship Date query field, the item number should display in the console on the left.
2. Select some amendments point shuttle from left to right shuttle and press the button.
3. the article selected our and these details must display in the table.
Design:
1 created as query field (entry of Message text) shipping Date.
2 Shuttle, Shuttle flight beginning and footer (second query button).
3. the table that contains the article, Description, quantity, and manufacturing details no.
Question:
I created a shuttle, the creeping shuttle and the flight of footer, here I mentioned the VO attribute and discovers for the first query that takes place in shipping date and displays the item No.
By default (without question) the extension numbers is the display in the shuttle leading.
How to use the fields in the query of the shuttle. Its not that allows you to query the selected fields.
Help required:
I need to ship date, then the element of the request should appear in the console of leak, then I need to move some element not in the shuttle leading and click on the second button of the query.
All required according to the shipping date and the amendments point values (Selected in the shuttle leading) must display in the table.
Thank you
Corinne BertrandPass this date and form a condition, and re-run the LEADVO
Anne Marie
-
HELP required on forming the matrix of data using PL/SQL
Hi all
I'm new on this thread and need your help in this regard.
I have a requirement for the construction of a matrix of 5000 X 5000 using PL/SQL. My original data tables have 5000 lines each and I need to make a correlation analysis using these data and need to store in a physical table, and not in memory. This feat feasible the simple use of PL/SQL? I understand that Oracle DB has a limit of 1000 columns (but not sure) and so I would like to know if there is a workaround for this kind of scenario. If not, what are the other alternative methods to achieve this feat? Do I need to use any 3rd party tools to do this? A quick response from experts is highly appreciated.
Thanking you in advance all the gurus.
Rgds
SAI1006089 wrote:
I have a requirement for the construction of a matrix of 5000 X 5000 using PL/SQL.
Possible. But this will require a large part of the memory. As PL/SQL is a language server side, this means the server's memory. That means server potential resource problems.
And that the server environment is a multiprocessu multi-user environment, it also means potentially several copies of this code of matrix running multiple processes, each putting a request very heavy on the resources of the server. Is no longer a matter of potential server resources, but a guarantee... (exactly the same problem if you use app server architecture and Java or .net)
You have to ask what is the cracking of data, server-side language? The answer is SQL. No PL/SQL. SQL runs rings around PL/SQL, Java, C/C++ and other languages when it comes to complex, fast and scalable, processing of large volumes of data.
So you ask yourself why use PL/SQL? With his expensive server memory footprint? SQL and not SQL tables that are designed to deal with massive data effectively and efficiently?
-
Help required to choose the designer of Livesycle or any other
Hi
I am working on a project of web based Government developed using J2EE. Forums are pretty useful. I need help from your team choosing products adobe for our requirement.
We have a requirement in which we want to give a form offline to users of the client. (Unlimited)
Then, we wanted to give the provision the user to download the form in the customer Web site.
Finally retrieve us the data from the form and store them in DB.
For the prescription above I thought to use Adobe LiveCycle designer. Once the form is designed and sent to end-users,
1. how the user can save the form.
2. it can save the form to PDF / XML or in any other format that it can download from the site.
3 is there a provision to get the fields in pdf form by calling request.getParameter () in HTML forms is how to read form in JAVA is to say like.
(Including images)
Once I get the fields of the form in Java, I can store in DB.
Please help in this regard and to offer the right product for our needs.
Once this is done, then assess us and plan to purchase
Thank you
RAM
Designer would create a PDF file that the user could load in their Reader or Acrobat. The PDF would be either the data input by the user (XML) or PDF to your web server for the treatment of post like an HTML form). The ability to present outside of the browser and the ability to allow users to partially drop the form and save work in progress and users use drive then you would require LiveCycle Reader Extensions enable the features of the player. Once you decide what you send, then you would enter the presentation into your program Java the same way you would for a HTML presentation.
I suggest you contact your Adobe representative to discuss more in detail.
Paul
-
Help required to resolve the error-200022
Hi all
I have a VI that throws the error-200022 (after acquiring data mx). This has got 5 data acquisition channels off 2 of them (THERMOCOUPLE sensors channel 1 & pressure - channel 1 commented on the left within the program) are throwing this error and do not read whatever it is reasonable and the program stops. However the other channels are read good values. When I checked the individually, it works perfectly fine but when I put them together in the same program he throws the error above.
I looked into some of the suggested solutions, but nothing did. Can someone help me solve this error. I have attached the VI as well.
Thank you very much
Rivet
I have it..!
You use "embedded Clock' for all the three tasks (thermocouple measurement) and its causing conflict... !!If you see here, the main reason (as I already specified it) is "resource requested by this task has already been reserved by another task." "" ...
I suggest you club all three tasks into one...!
-
Help - error message when the output
Dear members of the Forum,
Could you please help me solve the following problem?
I have a project in Adobe Media Encoder CS3 format MPEG2-DVD release and ended up with two files: 'movie.m2v' video and audio file 'movie.wav '. Then I grab these two files as 'calendar' in Encore CS5, did the menus, etc. After reviewing the project to find errors, none was identified and I went under construction the DVD disc. In the process of strengthening of the following errors occurred:
"'The Movie' PGC has an error at 00; 01; 24 20.
Internal software error: 0%, The Movie Info line: name = The Movie,.
REF = Bpgc, time is 00; 01; 24; 20'
When I play the movie in again, no error occurs at the point specified above time (00; 01; 24; 20) - there is a transition crossdissolve at this point.
Any ideas how to solve this problem, or probably help how interpret the error message?
Thank you!
For some of us on CS3, these errors could not be resolved, although there are workarounds. In the classic version of this, however, your timeline should be 01:24:21 - this would be terribly short. If there is more time, check in PR for a gap or another problem.
There were chapters in your imported movie?
In some cases, errors occur because of poor workflow, but short of redo your project, you can not solve most of the people.
Things, you can try (start a new project to rework):
Remove the spaces in the file names (only a problem if "The film" is a long name with several spaces). Sometimes a long path can create the problem.
Copy/move versions transcoded (m2v and ac3), 'film' without the 'other' (xmpses etc) files to a new directory and remake your project still using those.
Re-export of PR in multiplexed avi format and try that. (The most common problem was using an avi file, whereby the workaround option is to export you did.)
There are different issues in this case with a slide show or a motion menu, rather than with a calendar that you have.
-
question about how to combine the two scripts.
HelloI have a sql script that can display a table (or view) all the information, it works fine. I call it validate_table.sql, as below:
command prompt
accept invites owner "Enter table owner:
accept invites from TABLE_NAME "Enter object (table/View...) "name:"
column owner format a10 column 'owner '.
column format a30 topic 'Object name' object_name
column object_type format a15 direction "Type of object".
Status format a10 column titled "Status".
in the heading of column created format a20 "created."
the LAST_DDL_TIME format a20, heading 'LAST_DDL_TIME.
Select
owner
object_name
object_type
status
, to_char (created, "DD_MON_YY hh24:mi:ss") created
LAST_DDL_TIME,
Of
DBA_OBJECTS
where
object_name = upper ('& table_name') and owner = upper ('& owner');
command promptprompt -- ----------------------------------------------------------------------- ---
Guest - table/view structure-
prompt -- ----------------------------------------------------------------------- ---
command prompt
describe and owner... & table table_namecommand prompt
prompt -- ----------------------------------------------------------------------- ---
guest - list assigned user/subsidies-
prompt -- ----------------------------------------------------------------------- ---
command prompt
set pagesize 50000
set linesize 10000
set verify off
Set feedback off
column lvl format A4 direction "Lvl".
proprietary format of columns A14
format column in table_name A29
A38 dealer column format
column privilege A10 format
SELECT 'Role' lvl, t.table_name, t.grantee, t.owner, t.privilege
OF dba_tab_privs t
WHERE t.grantee IN (SELECT FROM dba_roles role WHERE = role t.grantee) and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
UNION
SELECT 'User' lvl t.table_name, t.grantee, t.owner, t.privilege
OF dba_tab_privs t
WHERE t.grantee IN (SELECT username FROM dba_users WHERE username = t.grantee) and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
UNION
SELECT 'Pub' lvl, t.table_name, t.grantee, t.owner, t.privilege
OF dba_tab_privs t
WHERE t.grantee = 'PUBLIC' and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
ORDER BY 1, 2, 3;command prompt
prompt -- ----------------------------------------------------------------------- ---
guest - list of synonyms created.
prompt -- ----------------------------------------------------------------------- ---
command prompt
proprietary format of columns A15
synonym_name A20 column format
A15 table_owner column format
format column in table_name A40
DB_link A40 column formatSelect the owner, synonym_name, table_owner, table_name, DB_link from DBA_synonyms where Table_name = upper ('& table_name') stopped by the owner;
command promptprompt -- ----------------------------------------------------------------------- ---
guest - list index created-
prompt -- ----------------------------------------------------------------------- ---
command prompt
Select
table-name
index_name
index_type
nom_tablespace
status
of DBA_indexes
WHERE table_name = upper ('& table_name') and owner = upper ('& owner')
order of table_name, index_name;
command promptprompt -- ----------------------------------------------------------------------- ---
guest - list of constraints-
prompt -- ----------------------------------------------------------------------- ---
command prompt
format column in table_name A15
format of column cons_type A15
cons_name A20 column format
check_cons A25 column format
VALIDATED A20 column format
column status A10 format
last_change A20 column formatSelect
table-name
(case constraint_type
When 'P', then 'Primary Key '.
When 'R' then 'Foreign Key'
When 'C' then 'check '.
When 'U' then 'single '.
When 'o' then 'read only display '.
When 'V' then 'check the view. "
When 'H' then 'Hash expression. "
When 'F' then 'REF column.
When the of ' then 'additional logging.
cons_type end)
constraint_name cons_name
condition_de_recherche check_cons
status
VALID
last_change
of dba_constraints
where owner = upper ('& owner')
and table_name = upper ('& table_name')
order of cons_type;I have another script that allows to display the newly created tables (table, table names) in the last 24 hours.
SET SERVEROUTPUT ON;
DECLARE
CURSOR tmp_cur IS
SELECT master, object_name
FROM dba_objects
WHERE object_type in ('TABLE', 'SEE') and the owner not in ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN") and last_ddl_time > sysdate - 1;
tmp_rec tmp_cur % ROWTYPE;
BEGIN
FOR tmp_rec IN tmp_cur LOOP
DBMS_OUTPUT. PUT_LINE)
tmp_rec. Owner | ' ' || tmp_rec.object_name);
END LOOP;
END;
/
The gap of the first script (validate_table.sql) is that it can only check table one by one by manual entry, then how can I combine these two scripts, to make a scipt that can check all newly created tables (not a table) in the last 24 hours?
I thank very you much in advance!
Hello
If you already know how to find the owner and all the tables created table_name recently. One thing you can do is to change all the WHERE clauses in validate_table.sql, so instead of things like
where object_name = upper ('& table_name') and owner = upper('&owner');
you say
WHERE (owner, object_name) IN
(
SELECT master, object_name
FROM dba_objects
WHERE object_type in ('TABLE', 'SEE')
AND owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN")
AND last_ddl_time > SYSDATE - 1
)
;
Here is another approach:
Validate_table. SQL is quite handy as it is. You may want to run this script for tables, even when you know that they are not new. Divide into 2 scripts: one called ask_and_describe_table.sql, which looks like this:
-Ask_and_Describe_Table.sql
accept invites owner "Enter table owner:
accept invites from TABLE_NAME "Enter object (table/View...) "name:"
-You can use any name path instead of d:\some_dir below:
@d:\some_dir\describe_table & owner, table_name
and the other one called Describe_Table.sql, which starts like this:
-Describe_Table.sql
DEFINE owner = & 1
DEFINE table_name = & 2
column owner format a10 column 'owner '.
...
and continues with the same exact content as validate_table.sql.
Now, to write another script (I'll call it Describe_Recent_Tables.sql):
-Describe_Recent_Tables.sql - create and run Describe_Many_Tables.sql
-Turn OFF the devices designed to help people to read the output:
SET ECHO OFF
SET FEEDBACK OFF
SET PAGESIZE 0
VERRIFY OFF SET
-Create a Describe_Many_Tables.sql:
COIL d:\some_dir\describe_many_tables.sql
SELECT ' @d:\some_dir\describe_table '
|| owner
|| ' '
|| object_name
FROM dba_objects
WHERE object_type in ('TABLE', 'SEE')
AND owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN")
AND last_ddl_time > SYSDATE - 1;
SPOOL OFF
-Features lighting designed to help people to read the output:
SET ECHO ON
SET FEEDBACK ON
SET PAGESIZE 50
SET VERRIFY ON
-Describe_Many_Tables.sql performance
@d:\some_dir\describe_many_tables
I guess that all of your tables have standard names (for example, start with a letter, no spaces in the name,...), which don't require quotation marks. If they could, then the same basic approach will work, but the details are a little messier.
When you want to see the information on a single table or view, no matter how old it is, driven
Ask_and_Describe_Table
or, if you do not need to question the owner of the table and the name, something like
Describe_Table SCOTT EMP
(You can find that you really need not Ask_and_Describe_Table.sql).
When you want to do this for all the tables created in the last 24 hours:
Describe_Recent_Tables
-
help how to ignore the header record in the input file
Hi gurus,
Kindly help here.
I'll have to generate the output to CSV file by getting data from the file 'INFILE.csv', a record header in it.
I would like to know to go to the header record during playback using utl_file.get_line package.please suggest.
examples of data 'INFILE.csv ':
NUMBER: the header
318000000000
318000000121
2005002999
3187209699script:
DECLARE
fINFILE UTL_FILE. TYPE_DE_FICHIER;
fOUTFILE1 UTL_FILE. TYPE_DE_FICHIER;
vINFILE_PATH VARCHAR2 (200): = NULL;
vOUTFILE_PATH VARCHAR2 (200): = NULL;
vINFILE_NAME VARCHAR2 (100): = "INFILE.csv";
vOUTFILE_NAME1 VARCHAR2 (100): = "OUTFILE.csv";
vGLOBAL_NAME VARCHAR2 (100): = NULL;
vINPUT_REC VARCHAR2 (1000): = NULL;
nNEW_NUMBER NUMBER (16): = NULL;
nMERCH_ID NUMBER (8): = NULL;
BEGIN
vINFILE_PATH: = ' / home/RPT / ";
vOUTFILE_PATH: = ' / home/RPT / ";
BEGIN
fOUTFILE1: = UTL_FILE.fopen (vOUTFILE_PATH, vOUTFILE_NAME1, 'W');
EXCEPTION
WHILE OTHERS THEN
UTL_FILE. FCLOSE_ALL;
RETURN;
END;
BEGIN
fINFILE: = UTL_FILE. FOPEN (vINFILE_PATH, vINFILE_NAME, "R");
EXCEPTION
WHILE OTHERS THEN
UTL_FILE. FCLOSE_ALL;
RETURN;
END;
BEGIN
LOOP
nNEW_NUMBER: = NULL;
UTL_FILE. GET_LINE (fINFILE, vINPUT_REC);
BEGIN
SELECT MERCH_ID
IN nMERCH_ID
PROD. MERCH
WHERE NEW_NUMBER = LPAD (nNEW_NUMBER, 12, 0);
-Creation of the output file for
BEGIN
UTL_FILE. Put_line (fOUTFILE1,
LPAD (nMERCH_ID, 8, 0)
);
EXCEPTION
WHILE OTHERS THEN
dbms_output.put_line (' error when writing to the outfile1: ' |) SUBSTR (SQLERRM, 1, 250));
END;
EXCEPTION
WHILE OTHERS THEN
dbms_output.put_line (' error finding MID for merchant - ' | nNEW_NUMBER |) » '|| SUBSTR (SQLERRM, 1, 250));
END;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN
dbms_output.put_line ('finished - End of file');
WHILE OTHERS THEN
dbms_output.put_line (' error reading I / p file ');
END;
IF UTL_FILE.IS_OPEN (fOUTFILE1) THEN
UTL_FILE. FCLOSE (fOUTFILE1);
END IF;IF UTL_FILE.IS_OPEN (fINFILE) THEN
UTL_FILE. FCLOSE (fINFILE);
END IF;END;
/Hello
978485 wrote:
Thanks Frank.
where should I call the get_line., in my script, I started after the loop as above
Immediately after open from finifile is a good place:
...
fINFILE: = UTL_FILE. FOPEN (vINFILE_PATH, vINFILE_NAME, 'R');
-The first line always is a header, to be ignored
UTL_FILE. GET_LINE (fINFILE, vINPUT_REC);
...
Or you could do later as immediately before the LOOP.
-
VM combining the Get - And Get-VMGuest CSV output
Hello
I am trying to generate a CSV file that combines different properties between the cmdlets Get - VM and Get-VMGuest but struggled.
I am aware that the cmdlet Get - VM will give me an output like the number of processors, amount of memory per VM, vm name etc., but also want to retrieve properties such as its IP address, running OS, hostname, etc in the same CSV report.
I tried to mix the taste.
Get-vmguest - vm (get - vm). Select-object vmname, osfullname | Export-csv c:\vm_osreport.csv
and a previous post by LucD-
--------------
Get - vm | %{
$_ | Select name. Out-Default
$_ | Get-VMGuest | Select the State, IPAddress, OSFullName | Out-Default
}Now if you want the result in 1 object (or an array of objects) you could make
Get - vm | %{
$vm = "" | SELECT name, State, IPAddress, OSFullname
$vm. Name = $_. Name
$guest = $_. Get-VMGuest
$vm. State = $guest. State
$vm. IPAddress = $guest. IPAddress
$vm. OSFullName = $guest. OSFullName
$vm
}--------------
but can't seem to get what I want. Basically, I'm looking for is the output to a CSV file - next
- vmhostname
- IP address
- numCPU
- memoryMB
- Allocated size of HD
- GuestOS (as reported by VMTools)
- Datacenter + file (if possible)
Can anyone help please?
Thank you!
Given that the ownership of comments is present inside the VirtualMachine object returned by Get - VM, you can get these values without running the Get-VMGuest cmdlet.
Something like that
Get-VM | Select Name, @{N="Hostname";E={$_.Host.Name}}, @{N="IP addr";E={[string]::Join(',',$_.Guest.IpAddress)}}, NumCPU,MemoryMB, @{N="HD size allocated (KB)";E={[string]::Join(',',($_.HardDisks | Select -ExpandProperty CapacityKB))}}, @{N="GuestOS";E={$_.Guest.OSFullName}}, @{N="Datacenter";E={Get-Datacenter -VM $_ | Select -ExpandProperty Name}}, @{N="Folder";E={$_.Folder.Name}} | Export-Csv C:\report.csv -NoTypeInformation -UseCulture
-
output of the coil in .csv file - of the problems with the display of data
Hello
You will need to provide the result of a select query that contains approximately 80000 registration in a .csv file. A procedure is written for the select query and the procedure is called in the script of the coil. But few of the columns have the decimal point in values. For example, there is a personal_name column in the select query that says the name as "James, Ed. Then the output in different columns. Therefore, the data is being shifted to the right for the remaining columns.
Some could help solve this problem. I mainly used a procedure as the select query is about three pages, and so you want the script to look clear.
Script is,
AUTOPRINT activated;
Set the title.
Set TRIMSPOOL ON;
the value of colsep «,»;
set linesize 1000;
set PAGESIZE 80000;
variable main_cursor refcursor;
escape from the value.
coil C:\documents\querys\personal_info.csv
EXEC proc_personal_info(:main_cursor);
spool off;Hello
set PAGESIZE 80000 ;
is not valid, and it will print header as all the 14 ranks of default.
You can avoid printing the header in this way:set AUTOPRINT ON ; set heading ON; set TRIMSPOOL ON ; set colsep ',' ; set linesize 1000 ; set PAGESIZE 0 ; set escape / set feedback off spool c:\temp\empspool.csv SELECT '"'||ename||'"', '"'||job||'"' FROM emp; spool off
The output will look like this in this case
"SMITH" ,"CLERK" "ALLEN" ,"SALESMAN" "WARD" ,"SALESMAN" "JONES" ,"MANAGER" "MARTIN" ,"SALESMAN" "BLAKE" ,"MANAGER" "CLARK" ,"MANAGER" "SCOTT" ,"ANALYST" "KING" ,"PRESIDENT" "TURNER" ,"SALESMAN" "ADAMS" ,"CLERK" "JAMES" ,"CLERK" "FORD" ,"ANALYST" "MILLER" ,"CLERK"
Alternatively, you can consider creating a single column by concatenating the columns in this way:
spool c:\temp\empspool.csv SELECT '"'||ename||'","'||job||'"'
In this case the output will look like without spaces between the columns:
"SMITH","CLERK" "ALLEN","SALESMAN" "WARD","SALESMAN" "JONES","MANAGER" "MARTIN","SALESMAN" "BLAKE","MANAGER" "CLARK","MANAGER" "SCOTT","ANALYST" "KING","PRESIDENT" "TURNER","SALESMAN" "ADAMS","CLERK" "JAMES","CLERK" "FORD","ANALYST" "MILLER","CLERK"
Kind regards.
AlPublished by: Alberto Faenza may 2, 2013 17:48
-
Will not save my tabs in the output, and I did everything on your pages 'help '.
Just 'improved' (and I use the term loosely) for Firefox 5. It won't save my tabs in the output. I always, just my home page.
I was all 'supposed' fixes that you suggest. Registration of the tabs in the output are clicked in the menu options. It does NOT help to quit on the file menu and it does load history.
Why did you mess with things that work? And royally mess them upward?Edited by a moderator because of the language. See the rules and lines guidelines .
Are clear you your history when stop? In Options > privacy, check the settings next to 'clear history of Firefox closing. " If the history is cleared, the tabs can not be restored.
-
Hi gurrus and LucD
I'm looking for a Script that can list all virtual machines with type of NIC E1000 via the output of the CSV file.
The script should search for information in a multiple Vcenter servers and multiple clusters and list all the VMs name, status (two powers on or off) with type card NETWORK Type E1000 only no other.
Concerning
Nauman
Try like this
$report = @)
{foreach ($cluster Get-cluster)
foreach ($rp in Get-ResourcePool-location $cluster) {}
foreach ($vm in (Get-VM-location the $rp |)) Where {Get-NetworkAdapter - VM $_______ | where {$_.}} Type - eq "e1000"}})) {}
$report += $vm. Select @{N = "VM"; E={$_. Name}},
@{N = 'vCenter'; E={$_. Uid.Split('@') [1]. "Split(':') [0]}},"
@{N = "Cluster"; E = {$cluster. Name}},
@{N = "ResourcePool"; E = {$rp. Name}}
}
}
}
$report | Export Csv C:\temp\report.csv - NoTypeInformation - UseCulture
-
I need help on how to audio output when I go. I ticked the box at the bottom, but when I go to view my video on quicktime, it does not play audio.
GUYS, I GOT IT. AND THE SOLUTION IS WAYYYYY WITH JUST A RENDERING. So after countless time I spent trying to make it, I found a way that me really happy that my old rendering has not worked. All you have to do is download adobe media encoder and BAM your gold. I make it in h.264 that i couldt using the old rendering and now it works fine.
-
Insert the module {cc_security} and captcha and continues to receive spam on forms Adobe Catalyst submissions. Help, please! Also the required field is be circumvented.
This has been resolved through Adobe Live Chat Support. Thank you
Maybe you are looking for
-
mouse only works for low 3/4 of a page and clicks what anyone at the top of page
Thr mouse will point the cursor anywhere on the screen but will not click on anything on the top of a page. This is a problem because the disconnection of the option is often at the top of the page
-
I want to improve my HD 8570 delivered installed video card. What is the rated power more of a video card that would work with the installed 450W power supply. CPU is 4770 I7 motherboard: MS-7826 (Kaili) Thank you
-
research program box and can not find the file on my computer
I went to click Start, type cmd, no program and file search box, where to type sfc/scannow to.
-
How to determine which program to use to open files and programs?
Help! How can I determine which program opens a file or another program? I constantly get the message that xxxxx will not open this file. / Select a program to open this file/etc.
-
WIDCOMM Uninstalltion destroys the computer. New Virus or Windows Voulnerability.
BUG/VULNERABILITY VERY SERIOUS WIDCOMM BLUETOOTH SOFTWARE Widcomm bluetooth software control panel uninstall erases all data, programs and the boot sector on your computer. I tried to report it to microsoft, but may not know how. Please report it to