mouse only works for low 3/4 of a page and clicks what anyone at the top of page

Similar Questions

• Microsoft Bluetooth Notebook Mouse 5000 works for awhile then stops

  I used the troubleshooting, deleted and reinstalled the product several times. I'm getting frustrated b/c it will work for a few minutes then stop. And then it's back to uninstalling and reinstalling it.  What is going on?  Why it does not work?

  Hello

  1. do you receive any error messages?

  2. are you aware of changes to the computer before the show?

  You can connect the mouse to another computer and see if the problem still occurs.

  I also suggest you to consult the steps mentioned in the article and the Coachman.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398/en-us

  See also:

  Connect a Bluetooth device that are neither require a TRANSCEIVER

  http://support.Microsoft.com/kb/952818

  Hope this information helps.

• Synchronize the dictionary of data with model only works for models imported?

  When I imported data dictionary model (file-> import-> data dictionary) then in relational model the two buttons "Synchronize Data with Model Dictionary" and "Synchronize model with Data Dictionary" works very well.
  
  But when I model created from scratch and I'm clicking on the buttons "Synchronize data dictionary with the model" or "Synchronize model with Data Dictionary" nothing happens.
  
  It works only for models imported?
  
  (Data model EA 3.3)

  Hello

  Yes, Synchronize only works for objects that were imported to the original (like Synchronize uses the information entered during the import to determine which database connection and the database object to compare to).

  If your model is not imported, you can achieve the same effect as follows:
  -Open the template in Data Modeler and also open the relevant physical model.
  -Do an Import of data dictionary, select the objects you want to compare with that.

  After the import phase, this will display the dialog box to compare, showing the differences between the objects imported from the database and your model.

  Note that if you intend to generate the DDL to update your database of the difference (as in "synchronize with Model Data Dictionary"), you must select the "Swap Target Model" option in step 2 (select database schema) data dictionary import wizard.

  David

• Apple Mail only works when I restart in "safe" mode otherwise it becomes crazy, using all the capabilities of the CPU.  Seems to be linked to the case.  Any help?

  Apple Mail only works when I restart in "safe" mode otherwise it becomes crazy, using all the CPU capacity without any correct output.  Seems to be connected with caches.  Any help?

  Generally, if your Mac works correctly in Mode safe, but not normally, then you have a third-party software that runs at the start of the origin of the problem.

  Safe mode disables most of the extensions of third-party startup and some Apple hardware, so it could be another problem for Apple, but I have never heard of your problem.

• I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

  I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

  Cache and history of the site Clear settings - Safari -.

  (1232)

• Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code redemption to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they c

  Sorry I added it in the question, sorry about that part!

  Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code CD Exchange to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they could transfer to my Surface and they canceled the monthly... but no, I'm still paying every month and I have a box of cd $ 500 that I can't use! Help, please!  How can I activate this pay redemption code (which does not work? I tried for hours!) and I pay monthly?  Help, please!

  Hi shannonr44052735,

  I see that you have an active subscription to Acrobat Pro DC under your email address.

  See this KB doc for help: redemption code help

  If your redemption code does not work, I will propose you to return what you already active subscription.

  You can install Acrobat Pro DC from this link: download Pro or Standard versions of Acrobat DC, XI or X

  Make sure that you use the same Adobe ID, in which you have Acrobat subscription.

  Let us know if you need help.

  Kind regards

  Meenakshi

• cannot copy pictures or my movie for flash player files more. Flash player is not filled to the top. Used last 3 weeks ago. You are using windows xp, media center edition 2005.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  cannot copy pictures or my movie for flash player files more. Flash drive
  is not filled to the top. Used last 3 weeks ago. Using windows xp, Media Center
  Edition 2005.

  ===================================
  Maybe there is a small slider that changes the drive to
  read-only?

  And... There may be a limit to the number of files that can
  Add in the root directory of the drive. This can be
  fixed by adding a few folders to sort the files.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• LR on Win 10 5.7.1: whenever I have open and click Import, disable all the menus and I can now no longer. [A: Lightroom 5.7.1 installation does not work]

  I have a PC with Windows 10 on which I installed Lightroom. Whenever I have open and click Import, disable all the menus and I can no longer move forward. No command is active and I can only leave the program. Please help as soon as POSSIBLE. Thank you.

  -gA

  Hi gA,.

  Please reset the Lightroom preferences and check if that helps.

  Reference: How to set preferences for Lightroom

  In addition, you can create a new catalog and open Lightroom with that and check if it works.

  Kind regards

  Mohit

• The mouse only works in the active window and cannot select drop-down menus (W7)

  Hello

  I can't understand what is the cause. I can only select things in the active window with my mouse, I can't move the window, I can't click on anything whatsoever outside of it.

  ATM by writing this, I can not open another program or select the bar of tasks or do anything outside that window. (unless I use CTRL-ALT-DEL and force to select a new active window with my keyboard)

  Another thing is that everything works within the window, except one thing, menus drop down, I can bring up the menu drop-down but can not select anything on the menu.

  I reinstalled windows to do this same thing. I can't understand why windows doesn't let me choose some things outside my main window, it's that I'm sort of protected mode.

  Thanks for any help

  Hello

  -What is laptop or desktop?
  -What is the brand and model of the mouse? Is it wired or wireless mouse?
  -Have you tried plugging the mouse on another computer?
   
  Method 1: I would also say you update the drivers for the mouse on the computer and check if it helps.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 2: Also, I suggest you use Microsoft Safety scanner to make sure that your computer is free from malware and check if it helps.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
  Method 3: I suggest you try to check with the other mice to make sure that the problem is not with the computer.
   

  If it is a laptop, I suggest you to check if a FN key function is to to do this. As you are facing the issue after reinstalling the operating system, I also suggest you check with the manufacturer of the computer, if there is this key.

   

  Hope this information helps.

• My mouse pointer works for everything except my Star Wars game

  My mouse works for everything, but my Star Wars game.  It allows to work with that also.  It will not show the pointer at all.  You can see where it is it lights up, but the pointer isn't here.  Can you help me?

  Hello

  Thanks for posting your question in the community of Microsoft Windows.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . What operating system is installed on your computer?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  I suggest you to check the sensitivity of the mouse in the game.

  Please follow the methods and mark the question below:

  Method 1:

  I also suggest you to update the video card drivers and follow the steps in the link below.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 3:

  Follow the steps in the link below.

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/BG-BG/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Control values defined by the Index function only works for a running VI?

  I've never used set of control values based on the Index before so I decided to compare it against two other ways to set the controls on the front panel, by using the invoke Ctrl.Val.Set node and nodes for the value property. But if the VI which I am trying to set the controls does not work I get error 1000 say "The VI isn't in a State compatible with this operation." When I run the VI which I am trying to set the controls, I get an error. This is VI really only work if the VI is running? I can't set the values before calling the VI to run dynamically?

  I wonder why you do so in the first place.

  a bit of history. This feature was added to the problem write to items in front by reference is about 1000 times slower than writing to the Terminal. I think that this feature works by writing directly to the transfer buffer. It always ends up by being slower than writing to the Terminal, but only about 10 times slower.

  My company made use of this new feature. We needed it because we have updated thousands of values of frontage on the same VI by reference and labview couldn't keep it up (Yes, probably could have worked around him in a different way, but there is more detail than this...). If your ' e does not update thousands of articles, probably you should not use this feature. Performance savings is not worth the additional development effort it takes.

  It does not work probably because the transfer buffer does not exist when the vi is not running

• Flash player only works for a single user on the PC

  I'm running a PC with Windows XP and IE8 there are two accounts on the PC, one for me and one for my wife, we are both members of the Administrators group on the computer. It was that I installed everything on my account. Then he was asked to update Adobe once, the installation failed, and since it does not work on his account.

  I've been through the knowledge base and uninstalled using the Adobe cleaning tool. I haven't used any other third-party tool, although I use the microsoft file to clean the registry. I even went up to now as uninstall adobe all other relevant documents and turn off my Norton antivirus to do a reinstall.

  I do not have or that run the system only works antivirus.

  The flash drive installed large on my journal, like the installation of ActiveX. It worked great (for me) when my wife recorded it did not work. So I ran the Adobe clean uninstall once again and then tried to install my wifes log. Installed fine but adobe flash activeX will not settle, it fails to half way through.

  I then go to my login and it installs and works for me, but not on hers.

  Any ideas would be really helpful

  Thank you

  I had a similar problem except Flash worked on some sites on one account administrator and all sites on the other. After deleting Java and re - installing and removing the Flash and reinstalling still had the same problem on this account of an administrator.

  I then deleted the history of full navigation on the account that did not work and 'Bingo', it worked. Who knows? Don't know what actually helped but remove history solved the problem in the end. Sometimes the simplest things solve the problem?

• the iPhone screen is not responding and only works for short periods of time when I use siri for an indefinite period.

  Then my phone 3 days ago started having a screen is unresponsive. I just found someone else who has the same problems as me. My screen is white and gray, flickering vertical lines at the top of my screen, sometimes extending to the bottom of the screen. My iPhone 6 s more screen shows only these lines when I use Siri for what it is, which is a little strange. To make things even more bizarre my screen becomes sensitive occasionally, but only when I'm talking about Siri for an indefinite period. One of the things I had in common with a question that someone asked who had similar problems that me was that, when these lines flickering, vertical, white and gray, the iPhone will eventually type things randomly on its own. Such as random apps or opening of the things randomly without my intervention. A unfortunate thing is that when this happens it selects things like that to end a call or facetime. I already know that the cost is $329 remedy since its considered as "other" in the apple repair options and I am also out of warranty, so I wanted to know if there is any other explanation for this. It made my phone very difficult to use these days now...

  Im going to guess that your phone is actually a 6 + and not a s 6 +, which means that your phone is suffering from simple plu epidemic of iPhones of all time - to the epidemic ic touch.  It is unrelated to Siri and tricks of the 'home', the lack of contact button that gets worse with time and flashing bars gray is the presentation of the default signature.  It's a failure level Council of integrated circuit chips that control touch and it is a design flaw in the jury of 6 + that Apple does not recognize.  You can send for microsoldering of the Board of Directors to resolve the underlying anomaly for half of the cost of your options at Apple--assuming that you are not interested in protecting your out of warranty at Apple options.

• G7 Pavilion: Pavilion g7 keyboard only works for the password

  I was recently given a grandma g7 Pavilion.  She barely used.  The keyboard won't let me enter her password but completely stops working after the password is entered.  He may have had an external keyboard used previously, but is not fixed now.  I read on the forum and tried all the fixes I've seen.  I tried: disconnect the battery taking then now power button for 30 seconds, put the battery back and plug in the unit, turn on press the ESC key to make Bios restore default.  Left battery, instslled all the updates, uninstalled keyboard under devices and rebooted.  Tried the trick of screen ctrl and print.  He strives to enter the password, so it has the ability to work.  Very frustrating.  The keyboard icon returns to the settings but I can't click on it.  Help, please!

  Hello

  As the keyboard works until you connect, check the following.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the "ease of access Center.

  Select the option "make the keyboard easier to use".

  If there is a check mark next to 'Turn on filter keys', click the box to Remove , and then click apply and then click Ok to save this change.

  Kind regards

  DP - K

• How can I get Vista navigation pane to only work for a specific folder view?

  I am running Windows Vista classic folders. Significant irritation is that I want to have the navigation pane enabled for the _only_ in my computer/Windows Explorer folder. I don't want that it activated for other folders with groups of icons for programs.

  But I find that when I turn it on for the first folder, it becomes activated for all. On the other hand, if I turn it off for a program icon folder, it is disabled for all files, including the Windows Explorer.

  So, how to customize the navigation pane to make it work for a folder specific _only_?

  The other models are for music or photos or videos or Documents (and I can't remember the fifth).  They show the different columns and present different data sorted differently.  I don't think they will solve your problem.

  Some general information here is on models and how to set any records that might be of interest to you (but will not solve your problem, I think):

  Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.

  It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

  I hope this helps in your situation.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.