Help! Reset AlienwareM14xR2 to factory settings!

Similar Questions

• Setting up Deskjet 6988 for wireless printing after a reset to the factory settings, using Mac OS 10.8

  Hi - How re - connect to my printer wirelessly after a reset to the factory settings? I use Mac OS 10.8. The network on the printer flashes, and on the Mac, it is listed as "not connected". And the page of report confirms that he has lost all of its data.

  Fortunately, I made a report page before resetting, so I think that I know all of the critical information, I need to come back here, but I can't figure out how to do this.

  I read the installation guide, who said to use an ethernet cable and the CD of HP, but I don't have the CD anymore.

  I tried an ethernet cable and entering the IP address of the printer, but which did not, perhaps because it has more this IP address.

  I tried the steps hereand downloaded the latest version of the HP update software software, but I don't see my printer. I went from my wifi to hpsetup network and then I could see and add a second new instance of my printer, but it did not help, because this second instance of the printer is not connected or the other.

  Interestingly, when I am connected to hpsetup, I can print.

  Can someone help me to re - connect this printer? I'll save the reason for reset for another post!

  Thank you very much!

  FIXED! Sunshyne2005, thanks a lot to direct me to the solution!

  Here's what worked:

  1. Connect to hdsetup
  2. Press the report Page button on the printer (the one with the box)
  3. Continue with step 3 of the Sunshyne2005: open a browser and enter the IP address of hdsetup.
  4. Look around for the wireless configuration wizard (sorry, I can't access is no longer hdsetup, and I just don't remember where it is)
  5. Enter the SSID (name) of the wireless network and the password
  6. Note: You will see a button to finish, but it has no effect. At this point, the printer is successfully added to the wireless network and access the hdsetup disappears. Therefore, the wizard will no longer work, but the important thing is that the printer is connected. : )

  Thanks again, Sunshyne2005!

• Service Pack 1 will not install after that the pc has been reset to the factory settings

  At my pc reset due to problems of crashing and freezing factory settings, when turned on after resetting received masses of updates Service Pack 1 has not been installed, but it shows in the story as being successful. He reappears in the form of waiting for update installation, but when the terms & Condtions accepted the installation takes a few seconds, history shows successful but it has not yet installed. So I can't install SP2 to update Internet Explorer 9

  Hello.

  Thanks for the reply. I found a previous question with a similar problem as mine, there was a solution that I followed and was able to install SP1. I should have done this before my question!
  I also installed SP2. Resetting to the factory settings was a last resort due to a problem I was experiencing, but after installation of SP2 my original problem reappears. The problem is now in terminal phase and looks like a new pc.
  In any case, once again thanks for your help, I know where to go with future questions I have.
  John

• Windows asking a key, after resetting to the factory settings.

  Hello

  I have upgraded to windows windows 10 8, did not work and not a not works well, but I missed the deadline of one month to downgrade back. I had a problem when starting and decided to reset to the factory settings. Now I'm back on windows 8, which came with the laptop, but its asks me to enter the windows key 8.

  I read about it being in the bios and no more on the laptop of physics, but I checked using belarc advisor and its give a product key with a lot of ' 0 which is not accepted in when you try to put in the actual key.

  I bought the laptop from hp in 2014. Not exactly what should be done now, or how to get the key.

  Hello

  You need to reinstall the exact same edition of 8/8.1 as was originally preinstalled on it.

  Follow these steps and do a phone Activation and brace yourself for a real person to help you.

  "How to activate Windows 8 and 8.1 telephone"

  http://www.eightforums.com/tutorials/24636-activate-Windows-8-phone.html

  SECOND OPTION

  To activate Windows by phone 8.1

  1 do step 2, 3, 4, 5 or 6 below for what you want or able to do.

  2. press on the Windows + R to open the Rusluisn dialog box, type slui.exe 4, press enter and skip to step 7 below.

  3 open an command prompt, type slui.exe 4, press enter and skip to step 7 below.

  4. open the menu tasks power users, click/click on Systemand go to step 5 below.

  5. open the Control Panel (Display icon)and click/click on the System icon.

  
  (A) click/click on Activate Windows in lower-right corner to Activate Windowstitle and continue with step 7 below. (see screenshot below)

  

  6 open PC config, click/click on Activate Windows on the left side.

  Etc.

  See you soon.

• My office has been reset to the factory settings. I am enrolled in my sync account, but my favorites that are on my laptop, did not came to the top. Now what?

  I was fortunately sync-ed a year betweem my computer laptop Mac iBook and desktop HP - a lot of bookmarks - I am a student. My office had a small problem and I got it clean and reset to the factory settings. I'm now creating upward. I installed Firefox and made Google my default search engine. Then I logged in sync - no problem (even email, password... I wrote it!) I clicked sync, but my favorites are not come to the top. I closed Firefox and re-opened, but still no bookmarks. I looked at the settings and everything is checked. I wouldn't change anything. What Miss me? Thank you.

  Both devices use new synchronization and more importantly on Firefox 30.

  If you you don't need the synchronization of the former, and even if you use the same address as used for synchronization of the old all should operate under the new synchronization.

  I think that the new synchronization drops devices that have not synchronized within the past 21 days.

  Former site of Firefox Sync: new Firefox Sync https://account.services.mozilla.com/ site: https://accounts.firefox.com

• HP 15: Computer hp laptop reset to the factory settings and it supports 12 hours and still not done

  I backed up all my files on a disc and I wanted to reset laptop to factory settings and it takes more than 12 hours to do this and not yet finished. He said: install Windows and the do again and yet 10 a.m. and it will not change... Is it broken? Can I get out of this

  I advise holding down the power button until the computer turns off and then turn it back on and boot from the recovery media again like you did before if you still have questions after what we do more testing.

  James

• Reset to the factory settings without restoration. Why do I see previous contacts?

  I have a new 5 iPhone.

  I added 6 contacts, 2 new downloaded applications. Saved on iCloud and iTunes.

  I had a very old Apple ID with an email address that I no longer use.

  I created a new Apple ID online by using this:

  Change your Apple - Apple Support ID

  Probably because of something, that I was wrong, there is a conflict between this new Apple ID and one on my iPhone.

  No problem. Because I only had 6 contacts and two additional applications, I decided to reset to the factory settings. I do NOT accept the offer to restore a backup.

  So I guess I now have a new phone out-of-the-box.

  In fact, my 6 contacts were always present. The two extra apps were not present.

  I would be very grateful if someone could explain why the 6 contacts are always present.

  I wonder how many other things could be hiding somewhere, which would not be present out-of-the-box.

  You can use a computer and connect to https://www.icloud.com/ and check the Contacts app it (under the two identifications of Apple as I'm not sure of the exact sequence of events that you did). If they are there and if you have settings > iCloud > Contacts under tension, which could explain from whence they came. With this setting, any changes to the Contacts is immediately synchronized between iCloud and the phone as soon as it is connected to iCloud.

• NB100 - How to reset to the factory settings

  Hello

  Need help... How to reset the factory settings on the netbook NB100... If you know please give me step by step guide

  Thank you

  You would probably need connect a CD/DVD usb drive and boot from the CD provided with the machine.
  Turn on, press F12 and select the cd/dvd as the boot option. Then follow the prompts, if it all.

  Hope this helps

• Satellite Pro L450d-12 x help restore to the factory settings

  I want to go back to the complete factory settings (as if windows has been reinstalled)
  There is no repair option in the advanced startup options (are there all the other options)
  If I go into disk management, I can see
  (C)
  recovery_data (D)
  (anonymous) (OEM partition)

  all the these have the status of healthy.

  There recovery.wim in the d drive, and a winpe.wim

  There are a lot of educational software that came on the phone that I do not have the cd. So, I don't want a new installation of windows.

  I tried to do a system repair disc, it upward with could not be created (0 x 80070057) so I'm not able to boot from the cd

  Is it possible to reset to factory settings complete with recovery or partition without a name?

  For future referance that is needed (a? or other? or both?) windows restore disk 7 oem 32-bit pro (version of windows I use) or the pro L450d-12 x recovery disk toshiba satalite?

  Thanks in advance

  > Is it possible to reset to factory settings complete with recovery or partition without a name?

  In General, you have two options:
  Either you try to retrieve the laptop using recovery disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
  or you will recover the laptop using the Toshiba Recovery disk which you likely has not been created in the past using Toshiba Recovery Media Creator. Right.

  Well, if the recovery of HARD drive does not work (whatever the reason), then you must use the recovery disc. If recover disk has not been created in the past, you can order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx

  This info has been helpful?

• Pavilion 17-e019dx Windows 8 guard reset itself to factory settings removes EVERYTHING! :(

  Hi everyone, I really need the helpful comments here, I m going crazy!

  I bought this computer HP Pavilion 17 laptop-e019dx at best buy not long... already have a problem with a windows 8.1 update, but anyway...

  I did a system restore and it is up to windows 8, fine, then all of a sudden I turn the laptop on another day, and without warning it resets to factory settings ... no account picture, no wallpaper, dates back to Bing is the default, the screen has IE search engine, File Explorer, store and office on it and nothing else... all my settings and customization is gone... but more importantly ALL MY pictures, videos, music, and all files are GONE!  SO FRUSTRATING!

  After MANY hours (a few days), I was able to recover most of the pictures which is what I've really supported on most. Saved USB´s, disks and creates a new partition ¨ Local disk (D ¨ where I saved all my files.) When the system resets itself, it resets only Local disc c, so my files are in D:... I can go back to everything being the same accomplishment the thing to restore the whole system again... but 1 or 2 days later, it resets everything new and need to start as if I just opened it from its box... non-stop... very frustrating because it takes time to restore and do not know it s good to continue to do that on the computer...

  Sorry for the long story, any help would be greatly appreciated!

  Hello kcno58. Thanks for posting on the HP Forums. I understand that the computer itself restores the default settings. I will do my best to help you!

  You have a program installed before other troubleshooting, named 'Deep Freeze' procedures. It is a program which will reinstall the operating system, once the computer is turned on, sometimes. For more information on this program, please see this site: Deep Freeze (software)

  If this isn't the case, I would make a repair of the operating system. To do this, follow these steps:

  1 turn on the computer with the installation DVD or USB. Then, start Windows 8 with him.

  2. follow all the instructions until you see "Repair your computer" and select "troubleshooting."

  3. go to "Advanced Options", select "Automatic repair" and the operating system.

  Now, the operating system to repair itself. Once this is done, please let me know the results. I'm only here to help!

  Mario

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• Satellite A665-S5170 reset to the factory settings

  I bought this laptop in February 2011 from best buy, I went on holiday in April, my father at the House-sit to the left and he used my computer. Said there are infestations of virus and its 'techno' friend installed linux mint OS on my computer and I want to not go.

  I want my Windows 7 return but I did not because recovery disks that I did not have too long and has not had the chance (don't wait no not my father to do something like that for her either). I know that there is a separate partition for the system restore in some satellite systems, can I access that without Windows on my computer? It is not double started, it's right linux and I can't STAND it. I also can't afford to pay for the new installation discs. Help, please!

  I can't use any of my programs, and I don't like the alternatives. I want to go back to Windows! Thanks for any help, it's GREATLY appreciated!

  EDITED TO add: since installing Linux, my keys do not light up or work, but I think that they can work with windows.

  Hi NaniApo,

  Usually, if another operating system is installed, you are not able to start the recovery of HARD drive more but you can try holding down the Zero key as Akuma writes.

  If it doesn't work your only option to restore factory settings is Toshiba recovery disc. If you n t have it order a service allowed in your country. On Toshiba site is a list with all FSA.

  I read that you can not afford to pay for a new disk recovery, but on the other side, I have to tell you didn't had the time to read the manual and you have to pay for that mistake. If I buy a new computer, TV or other media device I still have time to read the user's manual first and everyone knows how important it is. ;)

• Reset to the factory settings without Cd

  My mom has a HP Pavilion dv1000 Entertainment Notebook PC special edition and it got a lot of viruses. She was his friend that supposibly has difficulty trying to laptops and tie him up and when she returned to windows was completely wiped out and had a new call for software (Melissa or something like that) here. I was wondering how can I restore this laptop to its factory settings and when I download the disc to do? I really want this computer to have what was originally when he came out the store box so it's easier for my MOM to use for his business at home. Thank you.

  Hello

  seems that the CD from your computer's operating system are not available online call upport techinical hp for the recovery of them CD now call the 18004746836.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  By clicking 'Accept as Solution' on an answer that solves your problem helps others who are looking
  Although I work for HP, my messages and responses are my own opinion and not of HP.

• can I retrieve emails lost when my computer is reset to toshiba factory settings

  I use windows mail for e-mail on my toshiba lap top. My computer crashed and was recovered by a pc guy that restored it will use the toshiba factory settings.

  Windows systems have been recovered, but my documents, e-mails etc. were lost. Is it possible that I can get back them. Any help would be appreciated.

  Hello

  If you use Windows Mail and e-mail settings that are provided by your service provider Internet, e-mails that you receive are stored on your hard drive.

  When it was handed to the factory settings, the hard drive was wiped clean during this process.

  You can try this free program to try to recover your documents, photos, etc.

  http://www.Piriform.com/Recuva

  See you soon.

• BlackBerry 8520 smartphones resetting to the factory settings

  Hi there at - there a way to reset a bb to factory settings without using the button of bb in advance thanks

  Without using the Blackberry Menu button?

  Set a password for security on the device, then enter the incorrect password on the device ten times.

  I don't think the Menu key will be necessary for this.