Help! Saved as SVG in Illustrator not appearing with transparency/multiply vector not had reason to Muse

Similar Questions

• SVG image does not appear in the mobile version, but does in the desktop version

  Hello

  I am new to the use of Muse and have created one before site in Muse. I took screenshots to show the problem I'm having.

  
  

  I used Illustrator to create the image of the logo depending on whether I have save to SVG file:

  

  As you have probably guessed, I used a clipping mask to insert the purple Mason image in forms and text (this may be relevant to the problem, I don't know).

  I then save out as a SVG with the following details as advised by Adobe:

  

  Before moving into Muse, I File > place the SVG file. "Unable to generate thumbnail" comes in both desktop and phone:

  

  Anyway, I uploaded to FTP message on my site. While SVG is perfectly displayed on my desktop browser, it not only shows any on my phone's browser:

  

  This is not only happening on my phone, I visited the same Web site on several phone devices and the SVG image still does not appear. Ideas why this happens?

  Have I totally missed something on file formats for versions of mobile browser in Muse?

  Also - in illustrator, I saved the SVG logo for the mobile version as a SVG as SMALL as that I saved to the desktop version.

  Thank you

  Use a PNG file. I see nothing in your logo that would justify using nothing else. You're not scaling it, there is no interaction and everything that you do is hide some pixel data already. Forgive me, but using a SVG makes no sense at all. In addition one would need to see the file, but my guess would be that once more 'reactive' setting incorporates incorrect data. Wouldn't be the first time...

  Mylenium

• downloading of pages I get this:-' ga.js is would be not saved, because the source could not be read. Help!

  as noted above, all of the pages that I download for this.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• error starting buvoemd.dll: "the specified module is not found." (please help. some of my games have not worked since this error has been appearing after start)

  This error has been appearing after starting:

  "Error loading C:\WINDOWS\system32\buvoemd.dll".

  The specified module could be found.

  Can we fix this or send me a copy of the module or anything like that?

  (please help some of my games do not have given that this error has been appearing after start)

  Thank you

  There is no file with this name in Windows XP.  It was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• The SVG images do not appear in the web server, but it worked when using catalyst for the company.

  After that I used some pictures 'SVG' at the end of my work of muse, I exported "HTML files" and transferred all my web server.  SVG images are not displayed, appear other JPG, PNG.  But I downloaded the files in "adobe business catalyst", SVG and other images are displayed correctly.    Anyone know what I can solve the problem?

  Thank you very much!

  You must get your provider to serve SVG files with the mime type image/svg + xml to web hosting. Here is a link that describes the problem and the settings of your hosting provider must address. http://www.w3.org/services/SVG-Server/

• Can someone help me? PNG image does not appear on Dreamweaver cs6

  Can someone help me? PNG image does not appear on Dreamweaver cs6,

  Why its display with blue bg? his strange appearance... !!

  

  Thanks for your reply...

  Well, the problem was on the mode of the image. It is in gray scale, when it changed to RGB-image works fine...

  Once again thank you!

• BUG - SVG files do not (display) properly in Captivate 9

  Hello:

  I am currently working with a SVG file in Captivate however for some reason, the Captivate refuses to make the file correctly. I tried enabling / disabling "Allow smooting" in the properties of library asset but no difference. The file opens and renders correctly in artificial intelligence, and was established in artificial intelligence.

  Please find below the pictures illustrating the issue.

  SVG in Captivate file 9

  
  

  

  The same file in artificial intelligence

  

  I think it is a bug in Captivate 9. I see also similar rendering problem with SVG files in the preview / publication. Even in the case of these files that render correctly in Captivate, they do not properly when the content is presented in preview / published. I tried to view the published content in different browsers (Chrome, FireFox, Opera, IE, Edge).

  Any help will be welcome.

  Kind regards

  Mangesh

  Looks like the difference is in the way Illustrator creates the SVG of the file I. You could try the Illustrator various recording options. Not sure I can be of much help here

  In case you have problems with the SVG after import to Captivate 9 then let us know.

  Thank you

  MohanA

• Imported EPS files saved as SVG have a fixed image format

  I am new on Illustrator but experienced enough with Inkscape. Recently, I imported a new EPS image in Illustrator and saved as SVG 1.1. But the proportions of the SVG remains fixed when it is used in web pages. My images Inkscape will extend in both dimensions to fit the space. Is there something that I am missing? I use the free month trial to evaluate the Illustrator. Is this a limitation of the trial version? Thank you.

  Inkscape SVG saved with the default settings have not set the display area / region drawing, but the AI SVG only. That is why the different behavior. You must read on how to work this thing SVG.

  Mylenium

• SVG Import does not not for Muse

  When I do my Logo graphic in Illustrator and then save it to an SVG, it is fine, however when I import it to Muse it dislikes the file and says "Unable to generate thumbnail" and then when I saw on my SVG image is not even.

  This happened again and again, and it becomes very frustrating.

  Help please

  Thank you

  Hello

  Please check the forum post below, you might useful fond:

  Re: SVG Files not rendered in Muse

  Concerning

  Sonam

• SVG locally but not on the Site work

  Hey everybody,

  I have a few Animations of edge and they work perfectly when I load them locally in the browser. But I got their load in my site, who have SVG files in them appear not. The PNGs appear but not the SVG. What happens in all browsers. The interactive generated using ONLY PNG files work perfectly know the javascript code for the edge works because the animation is displayed but the 'empty' image shows instead of my beautiful SVG. I load in my HTML page using an iFrame. The iFrame would be the question although it works very well with Animations of edge made by using only the png?

  Any advice? Is this normal?

  Web

  Already, it looks like you're heading in the right direction.  Not all Web servers are configured to the SVG server correctly, so one of the first things you should check to make sure that your server is responding correctly SVG.  You can check by looking at Inspector Chrome or Firebug to ensure that it is served as img/svg, not text or any other format.

  Hope that helps,

  -Elaine

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• SVG trace element not working in FF 6.06 but works in all other browsers and validated by W3C service

  Hello
  I'm writing a game using SVG and for some reason the path element is not dispaying in FF 6.06.

  It follows the SVG 1.1 as per the W3C documentation and works in all other browsers, I tried same IE9. It must be something simple, but I can't. OK, it is validated by the w3c validation service. Here is the URL and also the source.

  http://www.ironagegames.com/iasb350bc/help/SVGTests/MyMan.svg

  <?xml version="1.0" encoding="UTF-8" standalone="no"?>
  <svg
     xmlns:svg="http://www.w3.org/2000/svg"
     xmlns="http://www.w3.org/2000/svg"
     version="1.1"
     width="600"
     height="600" >
  <g transform='translate(100,0)'>
  <!--<rect x='0' y='0' height='60' width='20' style='stroke:red;fill:none;stroke-width:1px;' />-->
  <circle cx='10' cy='5' r='4' style='stroke:none; fill:BurlyWood;' />
  <path d='m 2 10, l 16 0, a 2 4 0 0 1 2 4, l 0 18, c 0 2, -3 2, -3 0, l 0 -18, -2 0, 0 40,
  c 0 2, -4 2, -4 0, l 0 -22, l -2 0, 0 22, c 0 2, -4 2, -4 0, l 0 -40, -2 0, 0 18, c 0 2, -3 2, -3 0,
   l 0 -18, a 2 -4 0 0 1 2 -4' style='stroke:none; fill:BurlyWood;' />
  <path d='m 2 10, l 16 0, a 2 4 0 0 1 2 4, l 0 4, -3 0, 0 -4, -2 0,
  0 18, -10 0, 0 -18, -2 0, l 0 4, -3 0, 0 -4, a 2 -4 0 0 1 2 -4'
  style='stroke:none; fill:#8B7355;' />
  </g>
  <g transform='translate(100,0)'>
  <!--Med Spear
  <path d='m -10 55, l 0 -40' style='stroke:SaddleBrown; fill:none;stroke-width:1px;'/>
  <path d='m -11 18, l 1 -3, 1 3, z' style='stroke:grey; fill:grey;'/>
  -->
  <!-- SHORT JAV -->
  <path d='m -6 55, l 0 -18' style='stroke:SaddleBrown; fill:none;stroke-width:0.5px;'/>
  <path d='m -7 37, l 1 -2, 1 2, z' style='stroke:none; fill:grey;'/>
  <path d='m -3 55, l 0 -18' style='stroke:SaddleBrown; fill:none;stroke-width:0.5px;'/>
  <path d='m -4 37, l 1 -2, 1 2, z' style='stroke:none; fill:grey;'/>
  <path d='m -0 55, l 0 -18' style='stroke:SaddleBrown; fill:none;stroke-width:0.5px;'/>
  <path d='m -1 37, l 1 -2, 1 2, z' style='stroke:none; fill:grey;'/>
  <!-- Body Shield -->
  <path d='m 24 10, c 2 -1, 10 -1, 12 0, c -1 2, -1 22, 0 24,
  c -2 1, -10 1, -12 0, c 1 -2, 1 -22, 0 -24'
  style='stroke:grey; fill:SaddleBrown;stroke-width:2px;stroke-linecap:round;'/>
  <!--Short Sword -->
  <path d='m -10 15, l 0 -5' style='stroke:SaddleBrown; fill:none;stroke-width:1px;'/>
  <path d='m -12 15, l 4 0' style='stroke:grey; fill:none;stroke-width:1px;'/>
  <path d='m -10 30, l 0 -15' style='stroke:grey; fill:none;stroke-width:2px;'/>
  <path d='m -9 30, l -1 2, -1 -2, z' style='stroke:none; fill:grey;'/>
  </g>
  </svg>

  I think that this file violates 2 syntaxrules of SVG 1.1 SE.

  1. The separator for a statement drawto is ws * no comma-wsp
  2. Elliptical-arc-argument does not number of negativ

  See http://www.w3.org/TR/SVG11/paths.html#PathDataBNF

• Re: Satellite P750 - white dots appear with animations, not everything at stake

  White dots appeared with all the animations but note during the matches and need info on a solution to this.
  I did a factory reset again it's an update on the graphics card drivers and now the computer sometimes overheats and shuts down and also to slow.

  Any help would be appreciated!

  It s a Satellite P750 with gt 540 m graphics card

  > did a update on the graphics card drivers and the computer now sometimes overheats and shuts down and also to slow.

  You must use the page of the Toshiba driver graphics driver because this driver is designed for mobile use. Drivers from other sources are not changed and lead to overheating GPU. This may damage your laptop.

  PS: it would be interesting to know if the white dots are visible on the external monitor and when you noticed these white dots exactly (what animation?)?

• "the settings saved on this network do not match the network requirement" is the message that I get when I try to connect to my wifi

  I changed my router to another wireless.  Since then, my laptop cannot connect to my wifi.  When I search my wireless network, it is exed out in red.  and the message "the settings saved on this network do not match the network requirement"... Please help

  [moved from comments]

  Hey Mike,

  -What version of Windows is installed on the computer?

  This problem usually occurs with wireless networks. I suggest you try the suggestions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/the-settings-saved-on-this-computer-does-not-match/a82432f2-9312-480a-b2ea-720033c73387

  Let us know if this can help, or if you have any questions.

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think