Help set up WiFi N on RangePlus WRT110

Similar Questions

• I have a new backup disk (a disk of 5 TB of Seagate) and need help setting up with CCC!

  Hello world

  I have a new backup disk (a disk of 5 TB of Seagate) and could use help setting up with CCC.

  I did in the past without problem, but I want to assure you of a few things:

  1. This particular drive has software available in a folder on the disk backup (w / the PC and Mac versions). But... I intend to use this disk as an exact copy of my iMac HD; It must also be bootable.
  2. Should I format the drive with disk utility? Or load the software to the CCC on the disk and just leave their only backup software?
  3. One last question: I also have a MacBook Air, an iPad and an iPhone. I want to save them as well. Should I put them on separate partitions, I created? Or can we just one big happy family? The last is best.

  One last piece of information: two computers, etc, were all backed up via Time Machine. My data the most important, photos, etc., are also saved on deposit box and/or iCloud on a regular basis.

  Thanks for any suggestions or comments!

  Sally D.

  Delete and partition the drive by making a separate partition for each computer. The iPad and the iPhone is useless their own partition because they back up using iTunes and would appear in the clone of the computer that you use for each save. Each partition must be the size of the current cloned drive that can leave you with additional partitions for other stuff. Then format the drive Mac OS Extended journaled. Do not install any software that came with the drive, none of this is necessary.

  I use a very similar setup with a 3 TB drive. I clone my boot SSD in a single partition, my drive internal 1 Tb in a second, my Macbook to a third party, and I have a fourth partition which is currently empty, because I haven't decided what to do with it yet. I also have a 3 to Apple Time Capsule.

• How communicate you with a real person who can help set up my Photoshop CS6 license from a computer Windows to a new Mac?

  How communicate you with a real person who can help set up my Photoshop CS6 license from a computer Windows to a new Mac?

  Hello

  My son has Adobe Photoshop CS6 when he attended a school for dyslexia and disorders on the autism spectrum with software for students in the United Kingdom.

  He has used with success of this edition.

  I have the codes on the box but didn't post here not sure of what?

  He moved to one-sixth of the Collyers in Horsham college and had to buy a new laptop. The College being all Apple we brought a pro IMac.

  He studied art, graphics and media education.

  It is a challenge for a person with an age of 7 years in reading! Spell checking in the Photoshop really helped his presentation work. The IMac has the recognition voice very good text.

  It will be if everything's going to be all right on to art College to study graphics.

  The problem is that he must now get his Photoshop on his new laptop computer and the version that he only works on Windows.

  It is possible to send a new code for the CS6 works on his laptop?

  In the future it will need to Photoshop and Illustrator professionally, but at this level, we cannot justify paying a monthly fee for the latest version.

  Hope you can help.

  Regarding the contact with a real person who can help, which will be necessary for you to follow through with what you want so be prepared to have your exercised patience and hope that it is not.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• Need help setting up related content in HCM 9.1 PeopleTools 8.51

  I need help setting up related content in HCM 9.1 PeopleTools 8.51.
  I created a new service id in 'Set Related Content Service'. Its simple, it basically goes to google.com.
  Then I assigned Related Content for the Application Pages on the page «Manage the Configuration content to related» I'm my scenario, I've added it to the careers under the main menu.
  Then I went to the careers page, but the 'related information' link does not appear. How can I get this link to related information to appear at the top of the page/component?
  
  Thank you
  -Cory

  In order to get it work, there are a few basic server configuration requirements that you need in order to make it work.

  (1) define the field of authentication on the Web server
  (2) set the authentication of domain on the web profile
  (3) enable Single Sign-On

  The next in "My Oracle Support" document provides details on configuring content services.

  E-PORTAL: how to set up content related services. [984855.1 ID]

  In addition, here is a link to the PeopleBooks online that deals with the configuration of related content services.

  http://download.Oracle.com/docs/CD/E18083_01/pt851pbr0/Eng/psbooks/tprt/book.htm?file=tprt/htm/tprt20.htm#H3002

  In addition, there are also some know the limitations to the use of related content are different depending on the version of the tools you use.

  I hope this helps.

• BlackBerry Curve 8520 smartphone newbie help setting up please - have wifi but no browser, no internet, no email

  I just bought this opportunity curve near new.  He seems to have been correctly data erased by the former owner.  I ran the Setup Wizard and everything worked fine.  It is connected to my wifi with a signal strong. But

  1. the browser says "unable to connect to the Internet - contact your service provider', and

  2. the email setup screen does not offer of "I want to create or add an email address" as in the Guide of the user - only 'I want to use a work email account' that I don't have and don't want!  The screen message indicates if the "add an email address' ' option does not, provider of wireless.

  I don't understand!  If my TalkTalk broadband (wifi) to connect to my laptop to the internet without problem, what to do more I have too much to do to get on the internet (connected to the same wifi) Blackberry?

  3 and how do I connect to the internet via the phone (Vodafone PAYG) when I'm not at the wifi range?

  Finally:

  4. why my phone says 'unknown number' when he is screaming? The User Guide says it should show my own number.  Surely, he knows that the Sim card number?

  Completely out of my depth here, as you can see...

  Many thanks in advance for any help

  Michael

  Hiya, according to messages that your phone gives you... You will need to contact Vodafone.

  In order to use most of the features of your phone as email or BBM data, you need a data plan blackberry rather than the generic of your provider.

  Then call us Vodafone - I think that the BlackBerry Bolt On on the distribution is £ 5 per month with data inclusive.

• Need help with RangePlus WRT110 wireless router

  Whenever someone on my laptop when my computer is turned on, I get an interference of connection for about 1 minute, then everything returns to normal.  How can I fix?

  I think maybe it's because your two computers are the same IP address of your router, it's why you get disconnected when your other computer is turned on. So I think you can set a static IP address to your desktop in order to solve this problem. Follow the instructions how to give static IP for your XP computer.

  Click the Start button > settings > Panel > Network Connections - right click on the icon for the local area network connection and go to properties - in the "Général" tab select "TCP/IP Internet Protocol" and click on the properties button - select "use IP address following" - provide the IP - 192.168.1.5 - subnet mask 255.255.255.0 default gateway - 192.168.1.1 - favorite DNS 192.168.1.1 DNS - auxiliary 4.2.2.2 > click the Ok button to save and click 'Close' on the main properties window.

  After that try to go online from your desktop computer, once you're around online on your other computer and check whether you are experiencing the same problem.

• Latest drivers Atheros does not help with hotspot WiFi (or access point)?

  I updated the drivers from v7.7.0.288.0. It's the latest and probably the last pilot found in archive of drivers for the A200 support.

  I set up my WiFi Atheros in usual manner of Vista. The steps are described in most PC portals for the creation of an access point WiFi in Windows Vista.

  1 Control Panel
  2 network connections and sharing
  3. ad-hoc creation, the SSID, password etc.
  4. share the internet connection button.
  5 allow to other users on the network to use my internet
  6 access point is created and Windows indicates that the signal is "Excellent".

  Everything is simple and straightforward but my Android smartphones don't detect access point.
  So what is the fault?

  Driver details dated 03/09/2009 in the Page of Support Toshiba informed that the update of the wireless Lan driver is to 'connect to your wireless access Point or to another PC wireless using your wireless network card.

  [driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 725 & STAS hortMod = 518 & language = 13 & selOS = 26 & selType = 97 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 97 & page = 1 & ID = 54134 & DISO = 26 & driverLanguage = 42]

  COMPUTER geeks report that my Atheros AR5007EG is able to create the gateway under Win7. I think in the same way, it should work with Windows Vista SP2.

  http://www.itgeekdiary.com/Windows-7-as-an-Wi-Fi-access-point/

  I tried other portals Windows but all of them describe the same steps by creating ad hoc to access Windows Vista point.

  Any help is appreciated.

  Kind regards.

  Thanks for the comments!

• Laptop Pavilion: help - Qualcomm adapter WIFI Atheros and incompatibility with the modem

  I bought a new laptop and can't seem to connect to WIFI at home and have dealt with many parts to get resolved nothing doesn't. Here is some key information:

  (a) laptop can connect via Ethernet to the modem Vodafone (the model is HG556a)

  (b) laptop can connect outside the House on another WIFI network

  (c) other PC and the device at home working on WIFI

  (d) the WIFI network adapter is Qualcomm Atherros QCA9565 802.1b/g/n

  The laptop detects the network, and I am asked to enter the key and it trys and advise network not available at this time.

  I looked to see if the adapter works fine in Device Manager (and assumed all good). There is no upgrade is recommended

  With advice from HP support I was through many loops, tests, and trials, restart modems, etc., included in the present was check it on the site of HP on the recommended drivers/updates, and downloaded a new driver

  Qualcomm-Atheros QCA9000 adapter, however it is not visible in the device only Manager downloads, not sure how truly "replace" the driver to see if I have better luck.

  Thankful the help of this forum

  The problem is resolved. Got back to my broadband provider and they change the setting of the channel from 11 to 1, and this has solved the problem.

• Need help setting up network home (Windows 7 Professional)

  I don't know why I have so much trouble with this.  I think that I never properly put in place a network before.  Usually, I just turn on my router with a password, and then the phone and other devices connect directly to the router.  I just got a new computer with Windows 7 Professional and it is prompting me to create a home network - and have apparently created a new password for the 'network' that is different from the password for the router.  I have a feeling that this will be easy, but I do not get set up correctly.

  First question, in the instructions to configure the network at a time given, was asked if all "clients" had a "wifi protected setup" button

  What is a 'client' on the network?  My router Linksys has one of these buttons (I pushed him, but he could not get connect/setting up with Windows 7).  Is a router from a client?  If so, a client what?  (I do not understand the use of the term client.)

  Here's what I would do.  I have internet entering a cable modem.  Ethernet to the modem router Linksys WRT54G.  (I don't remember the exact model.  It has a button "wifi protection setup.  Ethernet to the router to the desktop.  The router's Ethernet compatible HP printer wifi (which is currently on its own network).  The Windows account has two users (mine, of my wife).  The goal is to have a single network, with the office and the connected printer, and who I can connect with my iPhone.  And I want to be able to print wireless from my iPhone to the printer.

  Here's what I did.  There is a lot of information, but if all goes well it will prevent additional questions.

  I have reset the router and went to the 192.168.1.1. page.  In the Administration tab, I created a new password - which I thought was the password for the network.  I was not the case.  In the wifi tab, I looked for a place to put a password, but could not find one.

  I went on the computer, the network options in Control Panel to add a new network.  I was able to get a new network with the computer (LAN) connected to the router, but I couldn't get wifi to set up.  He told me to press the setting button of protection wifi on the router, but after a long delay, he said that he could not establish a connection.  Finally, I got a message (I don't know how) if I wanted to connect older devices to the network, I need to put a code - 12 letters/numbers with dashes.  I don't know what types of devices called it.  So, I found in managing network a "network key" tab  It was the same code - and it also seemed to work as wifi password.  But I can't change it to something that is possible to remember.

  And I can't do the printer on the same network as the computer.

  I guess I'm going something wrong.  Can someone point me in the right direction?

  It seems that if the printer is in 'ad hoc wireless' mode - it is just sitting there with his wi - fi enabled: indeed, 'here I am; connect to me if you want to print. »

  You need to connect the printer to the network wireless router.  It's pretty easy, but if you want a specific rather than general instructions, please provide the exact model of your HP printer.

  Generically, see--> http://www8.hp.com/us/en/campaigns/wireless-printing-center/printer-setup-help.html , you will probably end by using the option of 3rd or 4th.  In step 4 of the "HP Wireless Assistant', 'the WEP key or a WPA password' is the 'wifi password on the router" - which really, you must configure except if the House really is miles from any other civilization.

  "Referring to the first paragraph above, what I called the mode"ad hoc"seems to be what HP calls impression of"peer-to-peer"."  More specifically, in the FAQ at this link, your printer seems to currently be configured as described in "how to print wireless without a wireless router?

  Although he adds a little more complexity, I highly recommend that - after that you get things market - you read the FAQ section of HP on "a static IP will keep my computer against the loss of communication with my printer wireless."  In an environment with multiple wi - fi devices (for example, several iPhones), if the printer is turned off for a while, when you turn it back on it you will find that your computer will display is no longer her.  Print jobs will appear to work, but nothing will print.  If this situation arises, the solution is this FAQ section.

• Need help setting up switch SG300-10

  Hello

  I bought a SG300-10 switch and configuration.

  I have a problem to set up it causes that I'm not really used to networking.

  what I set up at the moment is the VLAN.

  VLAN 2 - step my router it for internet access

  Vlan10 - is for my server and pc in my office

  VLAN 40 - is for the wifi of comments.

  I will use the mode switch layer 3 and I want to configure a DHCP server on the vlan 40 but I'm not very well how to do.  I activated the DHCP and created a pool of ip but how I assign on the vlan 40? and how to set up everything to go on the internet? If I followed the basic logic, I will put all my members of port of vlan 2, is that correct?

  IM new in the field of networking

  Thank you

  Hi Justin,

  Here is some basic information for the switch. With VLAN, it is tag VLAN and remove the brand VLAN. A package of UNTAG means in the package header, there is no VLAN ID. The switch will provide separate from the client connection based on the transfer of bridge table. Usually UNTAG VLAN is used for the client connection. A beacon packet contains the VLAN ID in the header. In general, tag packets is used between other network device. An access port is member of 1 VLAN that is not marked. A trunk (on small business product) port is a port that has 1 UNTAG VLAN (VLAN native) and has the ability to tag the VLAN extra.

  Some examples of configuration CLI for tag and remove the brand VLAN. Keep in mind, VLAN 1 is the default VLAN, therefore, unless you make sure, VLAN 1 will default.

  To create a VLAN 2 on your switch

  Configure the terminal

  database of VLAN

  VLAN 2,3,4

  This will create the VLANs 2, 3 and 4

  To configure an IP address to a VLAN

  Configure the terminal

  interface vlan 1

  IP 192.168.1.254 255.255.255.0

  interface vlan 2

  192.168.2.254 255.255.255.0

  interface vlan 3

  192.168.3.254 IP address 255.255.255.0

  interface vlan 4

  IP 192.168.4.254 255.255.255.0

  Keep in mind, VLAN 1 must have a static IP address before you assign any other VLAN an IP address, or the switch will "lock".

  To assign an access as a member of the VLAN 1 port

  Configure the terminal

  Article IG1 interface

  switchport mode access

  To assign an access as a member of VLAN 2 port

  Configure the terminal

  interface hi2

  switchport mode access

  switchport access vlan 2

  If you check the GUI you'll notice port 1 is "1u" and port 2 is "2u".

  To create a trunk and assign some VLAN-

  Configure the terminal

  interface IG3

  switchport mode trunk

  switchport trunk allowed vlan add 2

  In the GUI, you will notice 3 port will be "1u, 2 t".

  To configure a port to have a VLAN different other that 1 as it removes the brand on a chest.

  Configure the terminal

  interface IG4

  switchport mode trunk

  switchport vlan trunk native 2

  switchport trunk allowed vlan add 3.4

  On the GUI, it will show '2u, 3 t, 4 t'

  Now that we have fundamental port assignment of the road, you can work on DHCP and IP address management.

  When the switch is in mode layer 3, if there is an IP address assigned to a VLAN, it is a switch virtual interface (SVI). The IP address of the service VLAN as default gateway which connects to this VLAN. The switch can associate the pool DHCP IP interface created on the switch-based layer 3.

  Firstly, we must establish your first jump of the switch - the default gateway of the switch statement. If you have a router connected to the SG300 you must assign the SG300 default gateway, which is the IP address of the router.

  Configure the terminal

  Default IP gateway 192.168.1.1

  Then you can concentrate on your DHCP scope. To configure a server DHCP table here is an example-

  network IP dhcp pool PRODUCTION
  

  address 192.168.2.1 low high 192.168.2.253 255.255.255.0

  Infinite rental

  default router 192.168.2.254
  

  dns-Server 8.8.8.8
  

  This basic table DHCP said many things.

  The name of the table is the PRODUCTION, this can be anything you want.

  low address is the first IP address that is assignable in the pool while high address is the last

  infinite lease means that had not expired DHCP lease

  Router by default, it is the most important. It is the default gateway, that the switch will be assigned to the customer. This is very important if you want router between VLAN or upstream of the internet

  DNS server, this allows to resolve the name instead of having to use IP only.

  Now, if you connect to a computer that is enable DHCP where VLAN 2 is not marked, you should receive an IP address that is assigned by the switch on this computer. Notice that the pool is a number of address IP 2 VLAN. The definition of IP pool, this is how it will bind to one VLAN, by matching the subnet.

  Now, once you have all the basic configuration complete, as Marty says, depending on the capacity of your router, it will need to need to support VLAN tagging, interface sub dot1q OR, as Marty has said, it would need static route to allow to your additional subnet route on the internet.

  Hope this will help you get on your way.

  -Tom
  Please mark replied messages useful

• Help setting up my new macbook

  my new macbook (el capitan 10.11.6) cannot check the user name and password when you set up your comcast (xfinity) meal.   I have it set up exactly like my old macbook that works fine and email still functions on, I also checked the username and password by logging in using webmail. What Miss me?

  Messaging > window > connection doctor

  see if that helps

• Help setting up my own podcast

  Hi all

  Looking to set up my own podcast, but I'm not sure what it takes so it can be added in the iTunes store.

  Is there step by step instructions on how to get started?

  Thank you very much

  «You may find it useful to consult my page «Start you "»

  http://Wilmut.UK/PC

  It also links to the complete Apple help pages. Then you probably a few specific questions then please come back and we will try to answer.

• Shop TV - how to set up WiFi?

  Can someone, please?

  Where the TV store set up my wireless to work?

  I have internet wifi and I would use on TV store.
  In manuals, I've read that I can stream the content from my PC, but do not know how to set up on the TV StorE.

  You have this TV store?
  http://www.Toshiba-multimedia.com/store-TV-serie/TV/

  The unit cannot be connected to the WLan. It supports HDMI port for you is to connect this HDD LCD directly. Also, you can use the USB port to connect the HARD drive to the USB laptop s. But WLan is not supported.

• Satellite A300 - how to set up WiFi draft N?

  Hi all new to the forum so Hello.

  My father just bought a Satellite A300 with Vista, which I'm trying to set up for him.
  I can't get the wireless to connect to 11n only 11g. I tried on both routers that I managed to connect my suburb to @ 11n.

  Under Advanced settings in the device, the option of Wireless Manager, it does not list 11n anywhere, it lists all of the combinations of 11A, 11b, and 11g but not 11n!

  Any help pointers appreciated!

  Best regards, Steve

  What is the exact model of your Satellite A300 code?

  And are you really sure that your Satellite A300 supports draft N? Did you check that?
  The fact is that not all Satellite A300 supports the new draft N speed.

  To me that sounds like it's your laptop doesn't support draft N and if that were the case, you should try to update the driver WLAN from your laptop.
  You can find it on the page of Toshiba.

• Need help setting up with a projector.

  Hello
  I have a M30X & seem to be unable to set up for use with a projector. I can get it to show the theme of office & my pointer of the mouse on the projection screen, but nothing else. I don't see any program on the projection screen & I want to use it to make PowerPoint presentations. I tried all the basic tips including the wizard, but no luck! Help please.

  Hello Lizzie

  It's very strange that there is no possibility to see any program started on projector. As far as I know if PowerPoint contains some copy protected files, it is not possible to be shown.