Need help setting up with a projector.

Similar Questions

• I have a new backup disk (a disk of 5 TB of Seagate) and need help setting up with CCC!

  Hello world

  I have a new backup disk (a disk of 5 TB of Seagate) and could use help setting up with CCC.

  I did in the past without problem, but I want to assure you of a few things:

  1. This particular drive has software available in a folder on the disk backup (w / the PC and Mac versions). But... I intend to use this disk as an exact copy of my iMac HD; It must also be bootable.
  2. Should I format the drive with disk utility? Or load the software to the CCC on the disk and just leave their only backup software?
  3. One last question: I also have a MacBook Air, an iPad and an iPhone. I want to save them as well. Should I put them on separate partitions, I created? Or can we just one big happy family? The last is best.

  One last piece of information: two computers, etc, were all backed up via Time Machine. My data the most important, photos, etc., are also saved on deposit box and/or iCloud on a regular basis.

  Thanks for any suggestions or comments!

  Sally D.

  Delete and partition the drive by making a separate partition for each computer. The iPad and the iPhone is useless their own partition because they back up using iTunes and would appear in the clone of the computer that you use for each save. Each partition must be the size of the current cloned drive that can leave you with additional partitions for other stuff. Then format the drive Mac OS Extended journaled. Do not install any software that came with the drive, none of this is necessary.

  I use a very similar setup with a 3 TB drive. I clone my boot SSD in a single partition, my drive internal 1 Tb in a second, my Macbook to a third party, and I have a fourth partition which is currently empty, because I haven't decided what to do with it yet. I also have a 3 to Apple Time Capsule.

• Need help setting up related content in HCM 9.1 PeopleTools 8.51

  I need help setting up related content in HCM 9.1 PeopleTools 8.51.
  I created a new service id in 'Set Related Content Service'. Its simple, it basically goes to google.com.
  Then I assigned Related Content for the Application Pages on the page «Manage the Configuration content to related» I'm my scenario, I've added it to the careers under the main menu.
  Then I went to the careers page, but the 'related information' link does not appear. How can I get this link to related information to appear at the top of the page/component?
  
  Thank you
  -Cory

  In order to get it work, there are a few basic server configuration requirements that you need in order to make it work.

  (1) define the field of authentication on the Web server
  (2) set the authentication of domain on the web profile
  (3) enable Single Sign-On

  The next in "My Oracle Support" document provides details on configuring content services.

  E-PORTAL: how to set up content related services. [984855.1 ID]

  In addition, here is a link to the PeopleBooks online that deals with the configuration of related content services.

  http://download.Oracle.com/docs/CD/E18083_01/pt851pbr0/Eng/psbooks/tprt/book.htm?file=tprt/htm/tprt20.htm#H3002

  In addition, there are also some know the limitations to the use of related content are different depending on the version of the tools you use.

  I hope this helps.

• need help setting up mocrosoft send my friend uses netgear wireless rural upstate ny need help for incoming, outgoing server POP3 etc info...

  try to set up my microsoft email in my pc. I need to respond to the need help sbout incomeing craiglist.i and out going.

  I have no idea to find my server address. I use connect netgear wireless.

  Hello

  Looks like you need configure Windows Mail

  you need to configure your e-mail account windows mail with your ISP internet service provider

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail

• Need help setting up network home (Windows 7 Professional)

  I don't know why I have so much trouble with this.  I think that I never properly put in place a network before.  Usually, I just turn on my router with a password, and then the phone and other devices connect directly to the router.  I just got a new computer with Windows 7 Professional and it is prompting me to create a home network - and have apparently created a new password for the 'network' that is different from the password for the router.  I have a feeling that this will be easy, but I do not get set up correctly.

  First question, in the instructions to configure the network at a time given, was asked if all "clients" had a "wifi protected setup" button

  What is a 'client' on the network?  My router Linksys has one of these buttons (I pushed him, but he could not get connect/setting up with Windows 7).  Is a router from a client?  If so, a client what?  (I do not understand the use of the term client.)

  Here's what I would do.  I have internet entering a cable modem.  Ethernet to the modem router Linksys WRT54G.  (I don't remember the exact model.  It has a button "wifi protection setup.  Ethernet to the router to the desktop.  The router's Ethernet compatible HP printer wifi (which is currently on its own network).  The Windows account has two users (mine, of my wife).  The goal is to have a single network, with the office and the connected printer, and who I can connect with my iPhone.  And I want to be able to print wireless from my iPhone to the printer.

  Here's what I did.  There is a lot of information, but if all goes well it will prevent additional questions.

  I have reset the router and went to the 192.168.1.1. page.  In the Administration tab, I created a new password - which I thought was the password for the network.  I was not the case.  In the wifi tab, I looked for a place to put a password, but could not find one.

  I went on the computer, the network options in Control Panel to add a new network.  I was able to get a new network with the computer (LAN) connected to the router, but I couldn't get wifi to set up.  He told me to press the setting button of protection wifi on the router, but after a long delay, he said that he could not establish a connection.  Finally, I got a message (I don't know how) if I wanted to connect older devices to the network, I need to put a code - 12 letters/numbers with dashes.  I don't know what types of devices called it.  So, I found in managing network a "network key" tab  It was the same code - and it also seemed to work as wifi password.  But I can't change it to something that is possible to remember.

  And I can't do the printer on the same network as the computer.

  I guess I'm going something wrong.  Can someone point me in the right direction?

  It seems that if the printer is in 'ad hoc wireless' mode - it is just sitting there with his wi - fi enabled: indeed, 'here I am; connect to me if you want to print. »

  You need to connect the printer to the network wireless router.  It's pretty easy, but if you want a specific rather than general instructions, please provide the exact model of your HP printer.

  Generically, see--> http://www8.hp.com/us/en/campaigns/wireless-printing-center/printer-setup-help.html , you will probably end by using the option of 3rd or 4th.  In step 4 of the "HP Wireless Assistant', 'the WEP key or a WPA password' is the 'wifi password on the router" - which really, you must configure except if the House really is miles from any other civilization.

  "Referring to the first paragraph above, what I called the mode"ad hoc"seems to be what HP calls impression of"peer-to-peer"."  More specifically, in the FAQ at this link, your printer seems to currently be configured as described in "how to print wireless without a wireless router?

  Although he adds a little more complexity, I highly recommend that - after that you get things market - you read the FAQ section of HP on "a static IP will keep my computer against the loss of communication with my printer wireless."  In an environment with multiple wi - fi devices (for example, several iPhones), if the printer is turned off for a while, when you turn it back on it you will find that your computer will display is no longer her.  Print jobs will appear to work, but nothing will print.  If this situation arises, the solution is this FAQ section.

• BlackBerry Smartphones Newbie needs help setting up email

  Hello world

  I've been the proud owner of a "BOLD" for about 48 hours now. This is my first Blackberry, so please bear with me.

  I need to set up my Yahoo email. I remember setting up front, but I deleted it as my allowance for the use of network (3 Australia) showed 2 MB roaming allowance, of which half was used in one day.

  I think that the e-mail message has been implemented via a browser page, but I can't go back to this page. The e-mail setup wizard seems to be to the establishment through BES which I did not. Does anyone know the address of the page?

  I also remember, when I chose the browser (not of Planet 3) I was taken in a BB page that showed several options of setting up various things. There were about 5 or 6 boxes grey listed above the other? Anyone also know the address of the page for this?

  Thanks for any help,

  Paul

  You also see a personal Email Setup on the device icon? If not try going into the Options | Advanced options | The host routing table. In this screen press press the button menu and choose to register now. See if you receive a message from check delivered to your device. Subsequently, reset the unit by removing the battery for 30 seconds. See if you have this icon now after restarting the device. If you still don't you can try setting up the account again on your carrier's Web site BIS to add return e-mail accounts?

  What options do you remember on this Web site? Try to go to mobile.blackberry.com on your browser and see if it's the page.

• Need help setting bios to boot from the cd. I did already but the laptop does not start again for cd player.

  Hello

  I forgot that my administration windows log password after the holidays.  I have loaded down a free program called Ophcrack and had set my laptop to boot from cd 1 but I just cannot get the laptop to boot from a cd.  He just continued boot from the internal hard disk.

  The cd is an image and it is bootable on my desk.

  The model of laptop: laptop HP ENVY m6

  Product number: C2N77UA #ABL

  BIOS version: F.25

  Processor type: Intel Core i7-3632QM CPU @ 2.20 GHz

  OS: Windows 8.1

  I only did a password reset disk (I'm learning the hard way now!).

  I don't want to do a "System Recovery" because I have some data on it.

  I realize there are paid there password recovery tools windows, but I would like to use this 'free' program to try to break 1.

  I just need help / instructions to set the bios for laptop can be started from a cd.  I also tried to boot from a key USB but the laptop kept begin its internal drive.

  Help, please.  Thanks a ton!

  Ted

  Hi Ted,

  You are welcome

  Boot into the bios menu and go to the very section where you have disabled the Secure Boot.

  Find an entry called materials and this value to Activate.

  Save the changes and exit the bios.

  Follow the previous procedure below:

  Insert the bootable disc of Ophcrack and laptop stop.

  Tap away at the esc you key start Notepad to open the Start Menu.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Kind regards

  DP - K

• I need help setting up my home network - windows vista.

  I need help to configure my network, I ave a laptop & hubby the computer w / dsl wireless rouuter. If I can get trhis to work, maybe we can work on the printer.

  Original title: help w / home network

  Hi Luvy,

  Thanks for posting your query in the Microsoft Community Forums!

  Looks like you need information to set up home networking on the windows vista computer.

  We're here to help and guide you in the right direction.

  -What is the number of brand and model of the computer?

  I suggest you to return the items online help and check if it helps.

  Setting up a network home

  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-home-network

  Setting up a wireless network

  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  To install the printer on the network see Help below articles.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-in/Windows-Vista/install-a-printer-on-a-home-network

   

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows-Vista/share-a-printer

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Need help on query with decimal places and trailing 0

  Community of Oracle I need help in the following situations:
  
  I received the following query:
  SELECT (SUM ("VALUE1") COUNT ("VALUE2"))
  FROM sometable;
  
  This returns the following results:
  200
  222,5
  
  I want to display as 222.50 222,5 value so I tried ROUND(value,2) but then came to the conclusion that the tour will not show drags me 0.
  So now I tried to_char(value,'9999DD00') and of course he's back 200.00 both 222.50.
  
  Now how to make it conditional so when a number has no decimal place it shows the whole number and when it has a decimal, it shows it in the format to_char(value,'9999DD00')?
  
  I hope I have made my situation and question correctly and I hope a solution.
  
  P. S.
  I need to appear like that since it is an average of the prices of the products
  
  Published by: Jnijman on July 3, 2010 13:06

  You can use CASES and INSTR:

  SQL> with t as ( -- generating sample data:
    2  select 200 col from dual union
    3  select 222.5 from dual
    4  )
    5  --
    6  -- actual query:
    7  --
    8  select col
    9  ,      case
   10           when instr(col, ',') > 0
   11           then to_char(col, '999d00')
   12           else to_char(col, '999' )
   13         end formatted_col
   14  from   t;
  
         COL FORMATT
  ---------- -------
         200  200
       222,5  222,50
  

• Need help get data with the most recent date of entry into

  Hey guys;
  
  I need help with fine tuning a query to get the one with the most recent implementation.
  
  Here's my current query:
  
  /**********************************************
  Select sge.seal_group_id,
  SGE.equipment_id,
  SGE.effective_date
  of seal_group_equipment EMS.
  seal_group sg
  where equipment_id = 48801
  AND EMS. SEAL_GROUP_ID = SG. SEAL_GROUP_ID
  and sge.end_date is null
  Group of sge.equipment_id, sge.seal_group_id, sge.effective_date
  After having sge.effective_date = max (sge.effective_date)
  
  ******************************************************/
  
  Which produces the following results:
  SEAL_GROUP_ID - EQUIPMENT_ID - EFFECTIVE_DATE
  25-48801 - 01/01/1993-00: 00:00
  11730-48801 - 22/08/2003 08:42:11
  
  
  What I really need, is to show only the line with the most recent date of entry into
  I hope someone can help
  Thank you

  MAX will not work because the SEAL_GROUP_ID could depart. I would say analytical:

  select seal_group_id,
  equipment_id,
  effective_date
  from (
  select sge.seal_group_id,
  sge.equipment_id,
  sge.effective_date,
  RANK() over (partition by equipment_id order by effective_date desc) r
  from seal_group_equipment sge,
  seal_group sg
  where equipment_id = 48801
  AND SGE.SEAL_GROUP_ID = SG.SEAL_GROUP_ID
  and sge.end_date is null)
  where r = 1;
  

  Keep in mind if two records have the same effective_date, they would both appear.

  Note: query above has not been tested, since there is no script provided.

• Need help - Cisco ASA with the power of fire

  Hello

  Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

  Is it possible if we add firepower on asa 5510... Please guide me... Thank you

  Power of fire must be installed on the new series X of the SAA.  5512 x, x 5515, 5525 x, etc.

  If you have a 5510, you probably want a 5512 x with an SSD.  Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

  Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

  Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

  If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web.  Cisco gave its product Web Director, who has done this function.

  You can host Web sites behind a firewall of ASA without proxy reverse.  And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests.  The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

  Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption.  I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

• I need help doing things with batch files

  This applies to All THE VERSIONS OF WINDOWS and probably relates more to MSDOS than any other.

  cmd.exe or notepad.exe and comand.com applications

  I'm doing some kind of Setup.

  I have a tool nice lottle I did that works with a batch file. and he has 3-4 text file sthat go with it. I wanted to make a batch file which would act as an installer. make the MainMenu.txt, ReadMe.txt, Credits.txt, DISCLAIMER.txt fill them with the correct values, then make the .bat file that acts as the user interface. and when this launch the batch file under its weight made it has created (and not as a child of cmd window) then delete itself so all that remained was the new files...

  I tried the command IF [NOT] EXIST filename command because it's the only IF the syntax I have any slight understanding of

  EXAMPLE OF

  mkdir EXAMPLE

  EXAMPLE of CD

  IF [NOT] EXIST MainMenu.txt GOTO CMAIN

  : CMAIN

  ECHO the text I want to be in the lead > MainMenu.txt

  pause

  EXAMPLE OF

  but when I run the command 'Betainstall.bat' file, it opens and then closes immediately. What would be nice if it was the CASE of WAT I TOLD it to. it doesent need to be opened, because it only creates a directory then makes em fills with files on and its done... but it doesent do anything. and since it closes too quickly it's a bit hard to read all the messages that appears. (im not fast enough for print scrn) and addition of the pause at the end did not a thing. and / k has ever helped me before

  so someone who knows nothing about MS-DOS or command prompt this is a great opportunity to showcase the prowess of youre

  I just need to find how to get cmd to delete the last entry of Y.

  If I could get the Y equal to NULL it should write the %M % and not okay right?

  For the first part of what I mentioned above, you can simply do:

  SET M =

  The M variable will then to null.

  However, for what is in quotes: No. get M set to null will do what you want.  Use the command I mentioned in my previous post.  Note the signs double% to get the result of %M % in the command of the user file.

  IF the echo % M %! == 1 ! Goto: whatever > USER - X 2. 0.Bat

  Then the USER - X 2. 0.Bat will contain the line:

  IF M %! == 1 ! Goto: whatever

  Now, from your original:

  SET /p M = type OK or CANCEL, and then press ENTER:
  IF %M % IS INSTALL OK GOTO
  IF %M % IS CANCEL LEAVE
  : INSTALL

  You can see that if the M variable contains not exactly the capitals OK or CANCEL capitalized (that you specified), then the second half of each IF statement will not be executed. Your sample of what is getting written to the file USER - X 2. 0.Bat, you typed tiny ok and it works again the part of the installation of your batch file because he simply fell thru to the: part of the INSTALLATION.

  What you want is a batch program that allows to anticipate all possible ways that the user could answer "correctly". When you check if the variable M is equal to OK, it checks that specifically. All other cases the letters will not be the exact match.  That's why I ran three different lines looking for okay, okay, then OK.

  The fall same thru happen here:

  SET /p M = press on, then ENTER:
  IF %M % == y GOTO RUN
  : RUN

  Because the only thing you're looking for is there it will be Goto: EXECUTION of the IF statement , if (and only if) M is exactly there, but if it is equal to anything else it will fall through to the next line which is your: block RUN. As you have, any response is typical for the "SET/p M = press on, then ENTER", it's going to fall through and get to the: RUN block. The only exception is that if the user presses the enter only key, it will then generate the error message that I mentioned and end the batch file. That's why I used the! at the end of the two %M % and on the end of what we test, such as OK! This test if the user pressed the key entry in itself without the batch file, which gives an error.

  So, instead of this:

  IF the ECHO %M % == 1 GOTO RUN > USER - X 2. 0.bat
  IF the ECHO %M % == 2 GOTO README > USER - X 2. 0.bat
  IF the ECHO %M % == 3 CREDITS GOTO > USER - X 2. 0.bat
  IF the ECHO %M % == 4 GOTO WARNING > USER - X 2. 0.bat
  IF the ECHO %M % == 5 GOTO EOF > USER - X 2. 0.bat

  Use this:

  IF THE ECHO % M %! == 1 ! GOTO RUN > USER - X 2. 0.bat
  IF THE ECHO % M %! == 2 ! GOTO README > USER - X 2. 0.bat
  IF THE ECHO % M %! == 3 ! GOTO CREDITS > USER - X 2. 0.bat
  IF THE ECHO % M %! == 4 ! Disclaimer GOTO > USER - X 2. 0.bat
  IF THE ECHO % M %! == 5 ! GOTO EOF > USER - X 2. 0.bat

  Or use which does the same thing, but look more pretty:

  IF the echo % M %! == 1 ! Goto: run > user - X 2. 0.Bat
  IF the echo % M %! == 2 ! Goto: ReadMe > user - X 2. 0.Bat
  IF the echo % M %! == 3 ! Goto: credits > user - X 2. 0.Bat
  IF the echo % M %! == 4 ! Goto: warning > user - X 2. 0.Bat
  IF the echo % M %! == 5 ! Goto: EOF > user - X 2. 0.Bat

  (Upper and lower case for the block names all answer the same, whereas they are not nit-picky as the tests within the statement itself. I put the: before the labels of block in the IF statement so I know it's a label. I left the uppercase EOF because it is an acronym for end of file. And I use IF instead of If since it's a small order and I like it to stand. This bit is just my personal preference.)

  Another thing, you can make is for your first redirection in User - X 2. 0.Bat is to use the single > crush entire previous existence of this file. Then for forwarding the following him, continue the > who is the operator 'Add file '.

  Better yet would be first to check if the file of the user - X 2. Bat is and give the user the possibility to replace, rename, or to have an abortion.

  Clear as mud now? :)

  Edit: I just looked and I see that you are already doing the single > for the first time. Pass over my hikes on this part. Laughing out loud

• New on routers... Need help pls connect with Primus d-link

  Hi all, I'm new here. I am a complete newbie to routers. I just got a Linksys WRT54GL. I managed to plug it in and it works but lost my phone service Primus IE D-link (KVD-1120).  I had going from modem to the Linksys router this router for the d-link has however led to d-link and phone does not work.

  I called Primus and after waiting on my phone cell phone $20 and 1 hour and 20 minutes later, they were no help other then to tell me that the modem must be connected directly to the D-Link and that somehow, I had to find a way to connect the Linksys router for the D-Link (only 1 WAN and 1 Ethernet port on the back (a).

  Someone along the way also told me that I had to reconfigure certain ports or open some more. I don't know how or what is the same.

  If someone is able to help, I would appreciate it so. Please guide me through it, I don't know how to find the ip address is if I need to do. (read that somewhere)

  Thanks in advance for your help and your patience

  If your Modem is already connected to the D-Link router and your phone is also connected to the D-Link router, because your D-Link router has only 1 WAN and 1 LAN Port, then you can connect the ethernet cable between the LAN Port of the D-Link router to the Internet Port on the Linksys router and configure all the settings on your Linksys router.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...

  Change the mode of WPA wireless security, encryption, select TKIP. Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and do not forget the key.

  NOTE: The password must be more than 8 characters...

  Once you are done with the settings on your Linksys router, unplug the power to the router Linksys, D-Link router and your modem... Wait 30 seconds and turn on the power to the Modem first, wait until all lights are the lid, then connect the power supply to the router D-Link and after 30 sec connect the power supply to the Linksys router.

  Now, check if you are able to go online from the Linksys router.

• I need help for online with my new laptop mini

  original title: online

  I bought a laptop mini JC Penny, which is supported by micrsoft 5.0, everyone don't know how I can get online?

  Hi LEEHill H,

  What is the manufacturer, brand and full model number and of the notelbook (I want to look it up online to see if there are instructions available)?  If you do not have this information, what is the reference number of JC Penny?  It come with an ISP account or you plan to use your?  How do you intend to connect to the internet (wireless via a router, cable, wireless by satellite link,...)?  If you want to install it anywhere (which means a satellite connection), your current ISP is perhaps not able to manage and you may need a separate account for this.

  The laptop come with instructions - or links to the online instructions?

  If XP is used for network access, then the installer should be easy once we understand how your ISP account is set up and how to access the functions of network configuration (if this is not the full product, but only parts of it).  Answers to the questions above should help us determine how to proceed (I hope).

  Thanks and good luck!

• Need help setting up a network home wireless to the working group. I tried everything I read and nothing has worked. I got lost.

  I just received a more recent laptop and wants to set up a network so I can transfer files back.  It seems that it would be a fairly simple network to set up, but obviously I'm missing something.

  It must be a wireless network.  I have a wireless router, two Toshiba laptops, running a Windows 7 and the other runs Windows 10, and I have a printer.  I can access internet with laptops or both if the router does not seem to be the issue.

  I read articles that said I had need of a homegroup, but that did not work.  Then I read an article saying since my computers running different operating systems, that I couldn't use a homegroup that I should use a workgroup.  I followed the instructions given in the article and which don't seem to work either.

  The names of working group on both computers are the same and so are the passwords.  The computer names are different.

  I was on the old computer and when I go into Windows Explorer, under network, I can see the two names listed, however, when I click on the other computer, I get a message saying that the computer is not on the network.  I got the internet service at the time so the router was working.  Another time I tried to copy a small file to the other computer and the message said I didn't have permissions to do so.  I got the same message when I tried to add a folder to the other computer in the network area in Windows Explorer.  I get the same types of messages when I try things peers, while on the new computer.

  Any suggestions would be greatly appreciated.  So far, since I got the new laptop, I spent nearly three weeks, trying to get things to work.  This seems to be the biggest challenge of all.

  Hi Carole,

  Thanks for posting your query in Microsoft Community.

  Let me suggest you refer to the article below which will help you to set up HomeGroup from start to finish.

  Homegroup from start to finish

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.