Help! silly question, I hope so :)

Similar Questions

• First time user VMware - perhaps a silly question re: server hardware

  Thus,.

  I started using VMware a couple of days for the tests. I have a client who has VMware ESX Server 3i installed they have a HP Server and I have a Dell Server I installed the same version of VMware ESXi.

  If I download their images run on Dell Server? Or is it that there is a problem?

  Rgds

  Chris

  PS - Sorry if this is a silly question

  Chris,

  That's what VMware call the independence of the material. http://www.VMware.com/virtualization/virtual-machine.html#c25953

  Basically, your VM has no knowledge of what is running on the hardware - so feel free to move to Dell for HP hardware and back.

  However - vMotion, the displacement of an engine on the virtual machine from one server to another server requires similar processors on both hosts.

  I hope this helps.

• BlackBerry smartphones probably a silly question

  I asked on another forum but really did not have a satisfactory answer. I hope that you guys will do a better job, even if it doesn't seem like a silly question.

  When I looked at the screen with the 8900, Javelin, he said, and yet it's a curve. Why two names and what's really, a curve, a Javelin or step between the curve and the "BOLD"? And if it's a curve, why is it called a Javelin?

  BlackBerry Curve 8900 2. aka Javelin.

• This may seem like a silly question, but I need answered please

  This may seem like a silly question but I'm pretty new to dreamweaver, but I'm learning. The question I have is this. When your hit a paragraph and press ENTER to make the next line of text that it comes down to 2 spaces. Sometimes I do not want these two spaces. I don't want no space between the two sentences. How can you put one sentence below the other no space? Thanks in advance. I seem to have understood all the other stuff except this one basic thing lol. Thanks for the help in advance.

  Entry update gives you a single line break

  Look at the view code once you do to see the resulting code.
  Jim

• a case of flip iphone 5 may adapt to a 5s, silly question I know but it will allow me to win £20 if yes ;)

  Hi, can an iPhone 5 flip case fit an iPhone 5s?  Silly question I know but it will allow me to win £20 if yes ;)

  IPhone 5s has a DEM double LED flash, you may need to enlarge the opening of flash in the case.

  http://img1.lesnumeriques.com/test/83/8343/iPhone-5-5s-capteur.jpg

• BlackBerry Smartphones here's a silly question!

  I followed the instructions to change the operating system and they worked perfectly! But here's the silly question: If for some reason you need to go back to the original OS, are you the same way? And you need to delete the XML file first?

  Thanks again!

  Yes... and Yes

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• This is a silly question, but I can't fix it! The icons that appear on my pictures I change them, have disappeared. The only way I can see them is in the grid. How can I get the icons on the miniature pictures of the gallery full loaded?

  This is a silly question, but I can't fix it! The icons that appear on my pictures I change them, have disappeared. The only way I can see them is in the grid.

  How can I get the icons on the miniature pictures of the gallery full loaded? TIA =)

  You probably dragged the thumbnail size film of small size which prevents the display of the badges of Lightroom. Using your mouse, the mouse on the top line of the strip of film and then do slide it supports to increase the size.

• a silly question on vCPUs

  Hello

  I'm sure this is a silly question on processors for a virtual machine but, I'm not entirely positive that I have correct and want just a confirmation.

  I have a server with 2 processors to 6 hearts of each.  or 12 cores in total in the server.

  When setting up a virtual machine and it lists the number of processors to give him, he's talking full processors or Cores?

  for example if I do a VM CPU 1, is it gets access to 1 core or 6 hearts?

  Thank you

  Ian

  IF the server is running multi-threads apps up-to-date, I give only 2 vCPU to begin with.

  Normal SOP for the creation of the new VM is to assign a single vCPU first, adding more only IF it is required as evidenced by poor performance with just one vCPU (over time). I have yet to find any VM (especially when created fresh and correctly) who has been really having more than 2 vCPU assigned to her.

  When you assign a vCPU virtual machine, it comes to carrots, no shells.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• This function SUMIF - a silly question

  This is my first attempt of spreadsheeting, and as my first attempts to skateboard, he seems doomed.
  However, I persevered and with the help of the forum members have done a very useful financial tool.

  I now have a spreadsheet detailing expenses on a construction project - pretty simple stuff.

  And thanks to some helpful people on this forum that I managed to create additional tables which add provider fees, so I can see how much I spent the merchant of builders 'Jewsons' and the "Acorn" who provide waste removal.

  And the formula looks like this:

  

  This table returns a total of money I spent on jumps with the disposal company called Acorn.

  I'm really happy about how it works

  So happy in fact I wanted to create another table that gets information from a different column and it adds up.
  I am trying to create ITEM(that's the column name) SUMIF, 'Lighting', cost.

  I want to total my spend on lighting (which appears in the column of the item)

  Then the worksheet should look in the column "ITEM" for any reference to 'Light' and total costs in a separate table.

  

  In an effort to simplify life for my part, I took one of my tables of existing work that creates the totals of the 'Provider' column and then duplicated it, gave it a new name and then tried to edit to give me the result I wanted. Thought that would be easy: replace 'Provider', with 'Point' and research 'Acorn' term with the new term "lighting".

  Doesn't seem to work like that so.

  I opened the formula and highlight 'Provider' and then click on 'Point' in my main table in the hope that "Item" would replace then 'provider', instead, I get "Table1::A1" and it does not work!

  Tried several other combinations of clicking and swear, but nothing seems to allow me to edit my stand-alone tables to another role.

  Now I don't know the answer will be simple and direct, but as far as spreadsheets go I am a fool and it's the first I've ever used.

  So be gentle with me please and tell me how to do it.

  Thank you

  Hi David,

  One of the things I like about numbers is how it is easy to create formulas. Point and click where it is about for me.

  First of all, I would like to suggest that look on the personal budget template. It uses a little SUMIF () to collect the totals.

  

  Notice the difference in my formula. In table 2::B2 my SUMIF resembles the table 1::A table 2::A2 value. When he finds it, he adds the values in the 1::B Table. If the Clients were points and 'A' has been 'light' we would do.

  A note. If you search for "light" in a cell that contains 'Acme Lighting' you will not return a value.

  Here's how to create a formula.

  

  I typed '=' to B2, then "SUMIF" and press return.

  "test values are highlighted so I go to table 1 and click on column A.. These are values I am looking.

  Then, I click 'condition' to highlight, then click on A2 in this table, because that's the value I'll get.

  Finally, I click on 'sum values' and choose column B of table 1. I will be seeing what is shown in my first screenshot.

  Latest I press return.

  This helps to your question?

  Quinn

• silly question on the background picture in vista

  I'm curious, does anyone know where the 'img22' in background windows vista images was taken?
  the image is of an Alpine Lake and probably sunrise. It looks like somewhere in the mountains of the sierra nevada, but would be too Rocky.
  the only available detail is taken by steve fu and copyright microsoft.

  Hi Danwill11,

  Thanks for posting your question on the Forums of Windows Vista.

  The image you're talking about is indeed to the Virginia Lakes, mountains of the Eastern Sierra Nevada.

  I don't really know if it's a sunrise or a sunset.

  Hope the information will help. Please post back and we do know.

  Thank you & best regards
  Ashish Gupta - Microsoft Support

  =================================
  Calm sea never make skillful sailors!

• Need help with questions of hotspot [Windows 7]

  So for the last few days, I've been playing with my wireless network I can get what is called Homepass which is just a way to fool a 3DS thinking you use Streetpass to get something. Well last night, I was able to get the thing a bit of work, but then I found a problem that I don't know how to fix.

  Here is a link to the instructions I had to do to implement, if necessary, the question is where is EDIT 7: http://www.reddit.com/r/pokemon/comments/2n8hg9/want_the_eon_ticket_homepass_is_for_you/

  In this EDIT 7, the person says change settings of your virtual adapter for that IPv4: https://gbatemp.net/attachments/capture-png.5745/

  Which I did, but now what happens is when I click on 'Get an IP automatically', then click 'Ok', and then access my wireless network card and click on the tab 'Sharing' and then 'allow the other network users to connect through this computer's Internet connection"and looking back at my virtual adapter IPv4 settings , they return what it looks like in the photo. I tried to uninstall and reinstall the drivers several times but with no luck, it always comes back to that.

  I read on the ' ICS using the ' Wireless Network adapt eCard should all be defined on "Obtain an IP address automatically" to really share. Also until I fiddled with the IPv4 settings, he said always 'Sharing' beside the SSID but now it is not everytime I have activate sharing. Could someone help me with this please? I'm still relatively new to this kind of things so I would appreciate any help I can get.

  Here are some pictures of what I'm doing.

  My network connections: http://i.imgur.com/cvZzfBE.png

  Virtual adapter IPv4 (front): http://i.imgur.com/bQ0lvZw.png

  (Front) network adapter: http://i.imgur.com/2lOIA4W.png

  Adapter network (after): http://i.imgur.com/h4KWkTL.png

  Virtual adapter IPv4 (after): http://i.imgur.com/8NytZeB.png

  Thank you once again.

  EDIT: Do you have a little look around and read a few pages on ICS and they said something about Ethernet cables, which reminded me that I actually had my Ethernet cable when I changed these settings, which could be the cause?

  Hello

   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.
   
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking
   
  Hope this information helps.

• At startup, firefox always ask: "Help us -" question.

  When I open FireFox, I always asked the question ' help us improve Firefox - ' no matter if I click Yes, no, or change the setting in the options.

  See:

  • http://KB.mozillazine.org/Preferences_not_saved
  • https://support.Mozilla.org/KB/preferences+are+not+saved

• Please help, my question was answered when I tried simply adding a clarification

  Oh dear. Well. You simply respond with precision to my posted question seems to have marked "resolved". This forum is a nightmare, I'm sorry, but that's how I feel it. I can't even tape all the corrections I write the message, because the type will not appear if I type some thing what what else. I am until 05:00 after trying to deal with the last update of iTunes. Apparently, nobody believes in if it's not broke don't solve this problem, more. So, Yes, the nightmare continues.

  If anyone can please answer the question, please rest assured that he is yet to respond.

  I regret to have updated my iTunes to 12 points, today no matter what. I used to just uncheck a song for the have deleted from my camera when synchronized, but still in my library iTunes for possible later use. Please, please tell me that the feature is still there somehow.

  After the update, I see it's songs with controls grayed out by them... No matter how much I click the checkmarks, they remain the same, checked. It seems no more unchecking.

  To clarify: read the help, it is said that for "remove an element that has been synchronized automatically: do one of the following."

  Deselect the checkbox for the element in your iTunes library and select sync only checked in items... »

  The problem I see is that the controls next to the songs are gray. No amount of clicking on them won't be uncheck the. Is there something I'm missing here?

  Help, please.

  Thank you.

  You're try to uncheck the song in your library, iTunes aren't you? You uncheck the box 'on the iPod.

  Uncheck the box in the library and then synchronize the iPod with the library.

• Hi, I'm new to animate so please be patient if this is a silly question. Problems with receiving the option loop 'play once' in the properties panel to work.

  Hello world

  I created a graphic symbol, then a test fast and then selected animation symbol on the stage (this did not bring the loop for me option in the properties panel initially), when I chose the last keyframe of the animation in question then selected the symbol on the stage, I was then only able to access the loop drop-down list in the properties panel. However, after you select 'play once' and test movie he continued to loop.

  Has tried to enter the symbol (in vase clos-sorry not sure of the exact terminology) and created the animation, then left the isolation and made sure that the animation was enough images in the scenario main and tried and still had a continuous loop.

  I used the stop(); action on a clip before that worked well, but who did a very basic animation; This requires several objects moving and stop at different times and I found the stop action interrupts the entire animation at that time here.

  So I have 2 questions:

  How we use the function 'play once' to make it work because that seems like the easiest option for what I want to achieve.

  Or how to effectively use code to stop and start the animation when I need to?

  Thank you in advance for your help!

  publication settings, disable loop timeline