Help sounds placed on a movieclip...

Similar Questions

• Help! placed grayscale TIFF doesn't let me change his color chart of colors...

  Help! placed grayscale TIFF doesn't let me change his color chart of colors...

  Tried to revive demand, re-boot PC in the case of a technical problem. Something with graphic blocks that must be re-stored I don't know?

  I also tried to create a new page, import another image and persist on the issue.

  How do I "re-adjust" my settings so it does not once again?

  Thank you!

  Here is the information about resetting your Pref.: replace your preferences

  But this probably isn't the problem. Are you sure that the images are really grayscale? What format they are stored in? They may not be colorized to identity card if they are transparent or do not have a background layer.

• Help: Sound interruption with itunes

  If I am listening to music on itunes and I opened another aplication or surfing the net, I get massive interruption and pitch of the sound. How can I stop this?
  Any help much appreciated.

  Hello

  On this path, it is not easy to say what may be the problem. I put t know what laptop you use, but I guess this happens if there are some active Treaty in the background and where the processor must manage with more applications at the same time. In my opinion, you can try to put an end to certain processes in the Task Manager and try to exonerate the processor of unnecessary activity.

• Helps to reset turned invisible MovieClips

  Hello world

  I am wet enough to AS3 and worked on the development of a site that can deal with a large number of content sections.  Ignoring the fact that I have not yet figured out berries button, I expect to get help on a problem, I can not go beyond.

  I have a series of movieclips content which I am with the buttons of the menu control.  As you can see below, they turn visible/invisible by clicking on the menu buttons.

  However, I can't find a way to recharge once selected clips, a menu button different so that each section for always remains in its State 'read' previously when the button is clicked again.  Is there a way to get the 'content_section' movieclips for re - load or re - set once you press another button in navigation?

  If anyone can solve this problem for me, I would be infinitely grateful!

  AS:

  [AS]

  menu.paintings_but.addEventListener (MouseEvent.CLICK, clickPaintings);

  menu.drawings_but.addEventListener (MouseEvent.CLICK, clickDrawings);

  menu.installations_but.addEventListener (MouseEvent.CLICK, clickInstallations);

  menu.texts_but.addEventListener (MouseEvent.CLICK, clickTexts);

  menu.bio_but.addEventListener (MouseEvent.CLICK, clickBio);

  function clickPaintings(evtObj:MouseEvent) {}

  showSection ("paintings");

  selectMenuItem ("paintings");

  }

  function clickDrawings(evtObj:MouseEvent) {}

  showSection ("drawings");

  selectMenuItem ("drawings");

  }

  function clickInstallations(evtObj:MouseEvent) {}

  showSection ("facilities");

  selectMenuItem ("facilities");

  }

  function clickTexts(evtObj:MouseEvent) {}

  showSection ("texts");

  selectMenuItem ("texts");

  }

  function clickBio(evtObj:MouseEvent) {}

  showSection ("bio");

  selectMenuItem ("bio");

  }

  //---------------------------------------------------------------------------------------- -------

  When someone clicks on an item of menu, show the right section...

  function showSection (sectionName) {}

  trace ("showing the section" + sectionName);

  paintings_section.visible = sectionName == "paintings."

  drawings_section.visible = sectionName == "drawings";

  installations_section.visible = sectionName == "facilities";

  texts_section.visible = sectionName == "text";

  == bio_section.visible = sectionName "bio";

  }

  This is where the menu items get selected or deselected

  function selectMenuItem (itemName) {}

  trace ("select menu item" + itemName);

  updateMenuItem ("paintings", itemName = "paintings");

  updateMenuItem ("drawings", itemName = "drawings");

  updateMenuItem ("facilities", itemName = "facilities");

  updateMenuItem ("text", itemName == "text");

  updateMenuItem ("bio", itemName = "bio");

  }

  Put a menu item selected or deselected.

  Each item of menu must have two mcs inside - "selected_mc" and "unselected_mc".

  function updateMenuItem (itemName, State) {}

  trace ("selected and deselected");

  var but = menu.getChildByName(itemName+"_but");

  but.selected_mc.visible = state;

  but.unselected_mc.visible =! of State;

  }

  [/ ACE]

  Thank you very much for looking and I sincerely hope a response! I spent weeks on this!

  Best,

  Mike

  OK, here is a tool for editing of existing code that I wrote:

  import flash.events.MouseEvent;

  var sectionArray:Array = new Array (paintings_section, drawings_section,

  installations_section, texts_section, bio_section);

  var buttonArray:Array = new Array (menu.paintings_but, menu.drawings_but,

  menu.installations_but, menu.texts_but, menu.bio_but);

  Let's add in the variables that we need follow mouse events:

  var paintingsClicked:Boolean = false;

  var drawingsClicked:Boolean = false;

  var installationsClicked:Boolean = false;

  var textsClicked:Boolean = false;

  var bioClicked:Boolean = false;

  Then, put each of the variables in a table:

  var clickedArray:Array = new Array (paintingsClicked, drawingsClicked,

  installationsClicked, textsClicked, bioClicked);

  Then let's add/change the headphones of events for the buttons:

  for (var b: * of buttonArray)

  {

  buttonArray [b] .addEventListener (MouseEvent.MOUSE_UP, buttonClick);

  buttonArray [b] .addEventListener (MouseEvent.ROLL_OVER, flipping).

  buttonArray [b] .addEventListener (MouseEvent.ROLL_OUT, rollOut).

  }

  function buttonClick(event:MouseEvent):void

  {

  determine which button has been clicked on:

  var thisButton:Object = event.target;

  find out where this button is in the table:

  var thisOne: * = buttonArray.indexOf (thisButton);

  Find the corresponding section:

  var repeat: * = sectionArray [thisOne];

  reset for unselected buttons:

  for (var button: * in buttonArray)

  {

  If (.currentFrame buttonArray [button]! = 1).

  {

  buttonArray [button] .gotoAndStop (1);

  }

  }

  find the corresponding Boolean variable:

  var thisVar: * = clickArray [thisOne];

  reset variables:

  for (var cv: * in clickedArray) {}

  clickedArray [cv] = false;

  }

  clickedArray [thisOne] = true;

  Move the button that was used just on the selected image:

  thisButton.play ();

  hide a section that shows:;

  (var section: object in sectionArray)

  {

  If (sectionArray [article] .visible is true)

  {

  sectionArray [article] .visible = false;

  }

  }

  show section that has been selected:

  thisSection.visible = true;

  }

  function rollOver(event:MouseEvent):void

  {

  var thisButton:Object = event.target;

  thisButton.gotoAndStop (2);

  }

  function rollOut(event:MouseEvent):void

  {

  var thisButton:Object = event.target;

  var thisOne: * = buttonArray.indexOf (thisButton);

  If (clickedArray [thisOne]! = true) {}

  thisButton.gotoAndStop (1);

  }

  }

  I have created 5 variables and then type their name in a table. When you click any button now it will change the value of one of the variables. The reversal and deployment functions are inside, if a button has been clicked the button only moves frame 1 on the launch event.

• Help! I need this movieclip to follow the cursor but only in some details!

  Hello

  I'm rather new to action script and need a bit of a kick in the right direction.

  This is what I have a problem with - I used this code to the movieclip background follow the cursor:

  {onClipEvent (enterFrame)}
  x = _root._xmouse
  y = _root._ymouse
  _x +=(x-_x)/10
  FLF +=(y-_y)/10
  }

  I want however - restict movement is so it remains hidden behind the other black point with the graphic "hglf".

  I hope this makes sense and someone can help out me!

  Thank you

  You assign the instance names in the properties panel, or use the library names?

• Please help on the Loader.content movieclip

  Hello
  I've been search autour and got the mixed solutions, summarized as follows:
  If I need to load external swf into the main swf file, I need charger with URLRequest appropriate for this purpose.
  Once charged, you can listen to the event complete and addChild the loader.content to the main swf.
  Because I have a stop on the first frame of the swf loaded, I need to run the SWF with a button. Solutions on the net pointed out that it happened, you must mount the loader.content to MovieClip and have to thanks to a delicate way to do it as
  
  var movie: * = loader.content;
  var clip: MovieClip = film;
  clip.gotoAndPlay (4);
  .....
  I tried this method and I still don't have a Type constraint: cannot convert flash.display in MovieClip
  Please help, do not know why some experts said that it works while I can't function. Thanks in advance

  Hmm, you try to load an AV1 (Actionscript 1, 2) SWF? If so, you are having some problems. AS3 does not handle these well. You better downgrade your app to AS2 and using MovieClipLoader. Import an AS3 SWF should enter native mode without any necessary data conversion

  evt.target.content.gotoAndPlay (2);

  WL

• Please help - sound problem

  After reformatting my laptop and re install xp pro everything works but my sound, first suggesting I want to renew my sound card drivers or the same update my BIOS I would like to mention that I have already taken these stept, the microphone works but I have no sound coming out of the laptop...

  Any ideas?

  [Edited by: admin April 2 05 15:40]

  Hello theodd1out

  If you have two partitions, you can install the operating system one comes first by using the installation in Expert mode. In this case, all data on the second partition will be backed up. If you are using a Standard installation in this case all partitions and data will be deleted. In this case it will be created a partition and OS will be installed.

  Fenriz is the best solution to preinstall the device using the recovery CD. In this case the unit will be clean installed. Otherwise, remove the sound card in Device Manager, detect the new hardware. Reinstall the sound card and the modem driver again. If two devices are recognized and installed correctly, check the properties of audio devices and all the settings there. In the future if you have any problems, please describe the situation better. If you write, I have no sound is not easy to say what can be the problem.

  Good bye

• With the help of text and buttons movieclips as buttons to point to the same layered framework?

  I'll have a terrible time with the 3.0 AS and animating CC 2015.2 in this project.  I was given a suggestion, but now I'm so confused output errors that I hope to get answers from you advanced people.

  The project is similar to this:

  Identify the Structure of the trees

  Framework 1 - nothing selected, visible instructions

  Frame 2 - Select sheets by clicking on the image (tree top or bottom) or text, leaves description becomes visible

  Frame 3 - branches select by clicking on the image (tree top or bottom) or text, description branches becomes visible

  Frame 4 - trunk select by clicking on the image (tree top or bottom) or text, description of trunk becomes visible

  
  Suggestion is:

  Do the video clip of each region of image tree and drop it on the layer smaller on top with alpha 0%

  Create a badge of the clip, and then tap on timeline with each framework has put in evidence and description

  Make the text button, then tap chronology framework with each has put in evidence and description

  Trunk frame – more small area place top layer

  Branches Frame - smaller than the leaves but superior to the place of the trunk between the two

  Framework of leaves - most square of the area on the layer under the Branches

  Can anyone offer any suggestions?  I used to program 5.5 Flash with Actionscript 2.0, but difficulties with Animate and Actionscript 3.0.  I don't know if I have to use swaps or specific images, but when viewing, he travels all frames without stopping even if each image as the AS command stop ();

  Thanks in advance!

  
  Rick

  

  Yes, if your buttons or movieclips, overlap one on top Gets the default click event. So, if you decide to create separate movieClips or separate buttons, be sure to give everyone an exclusive space.

  One approach I've used in the past for such things is to open the work, the tree in Photoshop then "cut" art into segments and put each segment in a different layer in Photoshop. Then you can import that art directly in to animate and each layer will import under a separate post. Then you can combine them into a movieClip to a work of art on the stage. From there, you can select each segment and each a movieClip or button you want.

• To help sound & iTunes to listen to books

  I used to be able to buy a book from Audible and load it into iTunes in 'Music '. Then I could pass this book in a folder I would use for my 'listening '. I had a folder for me and for my husband and for "on hold". When I sync has my husband and my devices, we each have our individual records to listen to.

  Then, there was an Audible change or iTunes & all the books went to iBooks. Now I do all my maneuvers on each separate device (my iPod, my husband, each iPad iPod touch) in iBooks. Is it possible to make this time in iTunes?

  Audio books is now stored and organized in iBooks, but always use you iTunes to manage those that synchronize to the devices.

  To organize, use Collections.

  To synchronize, connect a device, choose it so its content is listed in the sidebar, select audio books in the settings section, not on my device in the sidebar.

• I have windows xp d310 and no sound help

  no help sound dell a310 and that they want to work with me to resolve the problem.

  The following article might be worth a visit:

  Windows 7 - no sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

• How activate a button nested inside a movieclip as soon as the playhead enters and stop on a specific frame on the timeline root?

  The button nested in a clip has been set to false, like this, and the code is placed inside the movieclip.

  The code in the main timeline:

  stage.addEventListener (Event.ENTER_FRAME, enableBtn);

  function enableBtn(event:Event):void {}

  {if(currentFrame==21)}

  nav_mov.theBtn.mouseEnabled = true;

  }

  }

  The code for the button to false, which is placed in the movieClip

  theBtn.mouseEnabled = false;

  The movieClip is placed on the main timeline.

  Thank you very much for your help.

  that makes no sense.

  create a new fla.  Copy and paste your code in order to frame 1. Add a key frame to frame of 21.  Add a movieclip (nav_mov) on frame of 21.  in frame 1 of the nav_mov to a button (theBtn).

  test.  all the problems?

  Otherwise, how relevant your original fla is different than what I suggested that you create for testing purposes?

• Superposition of MovieClip

  I'm new to Flash and try to figure out how to get a snow movieclip to play behind a chart. No matter what I always play in front of everything else on the stage.

  The ActionScript of snow is Jacques... http://www.Kirupa.com/developer/MX/snow.htm

  I have two sitting layers above the layer 'snow', but this does not affect the way he plays on the stage.

  If someone could help me get a graphic to sit above the snow animation that would be wonderful!

  Any information is greatly appreciated!

  All snow code should be placed in the movieclip.

• Access to / changing a TextField in a MovieClip

  I'll start with apologize immediately above if this has been answered before, but I can't find it in my research.
  
  The long and short of it is I'm trying to aim a TextField that is already placed inside a MovieClip that I add to the scene.
  
  I did the class for the movieclip as shown in the attached code.
  
  This is the error I get " TypeError: Error #1009: cannot access a property or method of a null object reference."
  
  Thanks in advance for any help.

  Well well, happy and sad...

  I thought about it, but it is a pretty crappy workaround.

  in the constructor of popupHolder_mc I had to use 'addFrameScript '.

  Like this:

  var curFrame:uint = currentFrame;
  addFrameScript (curFrame-1, setDialog);

  addFrameScript is 0 based (where the - 1) and at this point, he shows the substance which has been initialized. so I am able to dialog_txt.text and all is well.

  A little depressing to have to jump hoops for no real reason.

  Hope this post helps someone, because I spent the day comes to work.

• How to choose sound to play?

  I'm just starting using the JavaScript SetVariable in my web pages to send information to a Flash animation. One thing that I'm stumbling, however, is how to specify which audio clip to play. I have a two layers on my calendar, with its one and the other with his b. based on a variable I set in the JavaScript, I want to put a mute or play, or anything that works to get one to play and not the other.
  
  Is this possible? If so, how?
  
  Thanks from a newbie in Flash,
  Beth

  you have very limited control over its seal to a timeline. you could work around this by attaching your sounds to two different movieclips, but you'd better to use the actionscript sound class to control your sounds.

  in the help file for the language reference flash actionscript 2.0 to check and check the class sound. you just need to create a sound object and discover the attachSound() and start() methods.

  You can then use an if statement to determine sound to attach to your sound object and solve your problem.

• Context-sensitive help for objects on the tabs (bug?)

  If a command or the indicator is on a tab, the context-sensitive help for that apparently no longer works. It's particularly embarrassing for clusters of complicated example.

  Is there a workaround I'm mising?

  Example: This is the context for a cluster (A) and for the same cluster help when placed on a tab of the control (B). Case B is obviously completely useless.

  

  Hi Altenbach,

  It is true that it is not fixed for 2009.  I checked the condition of the CAR and it does not just he makes to the 2009 version.  It is always open and it looks like they still want to fix in the future, but no guarantee on which version.