Help! placed grayscale TIFF doesn't let me change his color chart of colors...

Similar Questions

• I got a new 'live' email address that I place on important flyer. Microsoft does not have the correct password & doesn't let me change it. Help.

  I opened a new account 'live' for a large advocasy group where I have more than 600 members.  After distributing flyers to more than 200 with this new 'live' email address * address email is removed from the privacy *, I tried to go inside to see how many new members, I, questions, etc. In case you're curious, the name of my group of Defender is the TTransportation Accessible to adults with disabilities.  It is a very important cause that I worked for a year.   Live and Hotmail would not accept my password.  I know its right because I have a copy with all the info when obtaining the new account. Microsoft say they don't find that I'm the right owner and always check.  The info they want is not available, because it was a new account.  I was supposed to get the emails on the new account in my old email account, but that didn't happen either.

  I stand to lose hundreds of new members, contacts, sponsors and money for the worst of my reputation.  Why they let me not simply change the password?

  If microsoft doesn't let me change the password I know it's good I think they will cancel the e-mail address. Why I can not open a new account with the same email address?

  Who can I contact to make sure that I don't lose this email address and get the emails that were sent to me already.   This happened about a month now. My loss is important and durable since these flyers went to various community centres, organizations and continue to go around the city of Toronto and further across the province, which is what I asked on the flyers. I also sent the flyers, with the e-mail address of vercent on the internet, Facebook and all of my contacts.

  Please tell me what I can do.

  Desperately need help!

  get in touch with live help windows: http://windowslivehelp.com/

• Adobe Muse doesn't let me change the States of thumbnails in a lightbox.

  Muse doesn't let me change the States of thumbnails for my lightbox. The only thing that it is allowing me to do the right now is to change the opacity of each State. I would like to than the 'normal' State of my nail of the thumb to be a solid color, the "Rollover" State to reveal the image that is displayed in the Viewer, the State of "mouse down" to be another solid color and the 'active' State of being of the same color together as a 'normal' State I changed the color, and I even tried to fill it with a real image with a solid color file. Nothing will work - the State remains just to display the main images in the thumbnails. I would appreciate help! I don't understand why it won't work. States work for everything else.

  Hello

  With startup, if you add a picture as a thumbnail then it could appear as hero image.

  We cannot install according to States with the thumbnails of the images, any image or fill added to the would be added as a background image. You can change the image of the active panel, but still we can not install different images with the States.

  Better idea would be to use the composition where you can set up reports for the triggers and the images separate targets.

  Thank you

  Sanjit

• I can't delete a folder because I do not have the permission, but I am the administrator. It doesn't let me change the permissions. Help?

  First of all, sorry if this is in the wrong place. I had no idea what section to post this in.
  Today, I was using a program for the 'Minecraft' game called MultiMC and removing files that it created I don't have anymore, I came across a folder, I could not open, delete, or do something with. When I try to open it it says ' (place) is not accessible. Access is denied. " When I try to remove it, he said ' you must be authorized to perform this action. You need computer administrator permissions to change this folder ' (though, I'm the administrator - only account on the computer). It also gives me 'Retry' and the options to cancel, nor necessary. On properties it says "Unable to display current owner" and won't let me change the owner, even to the administrator. The file is 0 bytes in size, but I want to get rid of because I might want to remove the folder that it is in the future, besides I don't know if it's a virus or whatever it is. Please can someone help.

  Try this:
   
  How to take possession of an item in Vista. Works also under Windows 7
  http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/ 
  And it is necessary:
   
  Unlocker File Remover
  http://www.emptyloop.com/Unlocker/
   
  Alternative download sites.
   
  Download it from FileHippo
  http://filehippo.com/download_unlocker/
   
  Download from CNET
  http://download.CNET.com/Unlocker/3000-2248_4-10493998.html

• Adobe doesn't let me change my method of payment!

  I recently spent the bank accounts and tried to update my online payment information but received no option other than paypal. The account but that is tied to my adobe on paypal plan has expired, I can't remove it from paypal since there is always chess transactions with adobe listed as pending.

  I tried several times to update my payment method online at without success. I called customer service and was given a link to enter my payment information, which I did, but he then received a message a few days later saying that the payment with paypal does not pass.

  I then tried to use the help chat feature, where I was told that it is not possible to change my paypal to credit card payment information. The gentleman told me that I had to cancel my account and you re-register so that I could change my payment details. I really did not want to sign up for another year of this and I wanted to just finish my current subscription. Eager to do away with all this, I decided to cancel my subscription and pay fees of $38.

  Of course the payment does not pass because I could never get into my payment details. The site still doesn't let me update my payment information. I tried the cat help and told me that I needed to register and continue to use the service to change my method of payment.

  The expert, that I now discuss said they received my payment, but he does not appear in my banking online or on paypal. He then said he was in treatment, but I know he won't go through a card to a current account that no longer exists.

  I feel that it's just sort of a bug in their system that members of the customer service do not know how to solve. But it is seriously ridiculous and boring without end. I just want to with that.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Illustrator doesn't let me change my race weight the foregoing or less than 1 pt. How can I fix it?

  I'm trying to paint digitally on a jpeg of a pencil drawing I did. However, Illustrator is not letting me change the weight of the race of my brush what either above or below 1 pt. Does anyone know how to change this problem? I looked online, but so far everything I've tried has failed. Can someone help me?

  In fact I just somehow fixed. Apparently, I had to choose a certain option brush? In any case, thank you very much for your help I appreciate it =)

• Firefox doesn't let me change my list of homepage. I tried all the suggestions to solve them.

  As you can see below, I have a ton of bookmarks of the opening. I regularly rearrange, add, and remove them as my interest increases or decreases. Last week, maybe two, Firefox stopped allowing me to modify the list. It took awhile to notice, but on the last few days, I've been tearing my hair out trying to fix it. He began also do not let me change that represents I connected to Google +, I don't know if it of related or not.

  I tried to reset the default list. I tried to leave it blank. I tried to delete the preference files. I tried to reset Firefox completely. Whenever I load Firefox it resets the list of homepage that he had before. I'm quite frustrated. What I have to remove Firefox and reinstall from scratch, or is there something else I can try?

  Thank you.

  If Firefox does not close properly, your changes of settings in your session could not fully recorded.

  Could you check in the Advanced SystemCare (outside Firefox) software and disable its features related to the protection-browser to see if that makes a difference?

• Muse is not let me change the color of the text in different States - "changes to text can be edited or formatted by the State [...]"

  When I watch tutorials on the buttons of the State etc.. I see that Muse allows you to select different States, then highlight the text and change the color to set the color of the text in this State.

  But whenever I select the State I want to change, and then select my text and change its color, it changes the color of all States as a default color to be applied only for a State.

  I get the message "text ranges cannot be edited or formatted by the State. Change to this mode effect all States. "in the window of the States while text is highlighted.

  But people seem to be able to do it just like that. Any help is very appreciated.

  Hello

  States are associated with blocks of text rather than the text itself. Please make sure that the entire text block is selected instead of text to apply changes on different States.

  Please see the attachment.

  Kind regards

  Neha

• Airport Extreme doesn't let me change the wifi password

  While in the airport utility, I try to change my wifi password and I get "error when updating the configuration."

  There is also no list of what devices are connected to the wifi.

  And it lists the serial number...

  All these things were there yesterday, no downloads or updates between yesterday and today.  Full cycle restarts were made.

  The Setup is Cox as ISP, my modem (Arris Surfboard SB6183), AirPort Extreme 5th gen.

  MBP mid 2015, 10.10.5

  It seems that Cox is currently implementing a number of changes to their service having to do with IPv6 at the present time.  Cox users who have Apple routers have problems as a result of this, and... if we are using the correct information... Cox is telling users that airports are not compatible with the changes that have been made.  Here is an example of message that we saw today:

  Change default delegated prefix IPv6 in Airport Extreme with the Configuration automatic IPv6

  Cox suggests to reboot the router when a problem arises... that helps for some users, but not all.

  or

  Disable IPv6 on the router from the airport... What is not possible. Even if it were, Apple uses IPv6 settings to enable communication with other Apple devices on the network. You can disconnect IPv6 to the WAN port on the airport by changing parameters IPv6 link Local Only... that Cox makes no mention of.

  Now the possible Catch 22.  You must be able to enter the parameters of the AirPort Extreme to change the link Local only... and if you can not access the settings on the airport... things will be difficult.

  You are able to open AirPort Utility, click on the image of the AirPort Extreme and then click on change to display the settings... page with tabs for different areas... or... you get an error message until you can get the settings?

• Doesn't let me change the Cpu fan!

  Hey guys,.

  My cpu hp craped out fan and I tried to buy another fan I removed the old an and replace now the new fan will only work 830 RPM compared to the former which took place in 1800 as soon as the computer I tired about three different fans, it seems that he wants only foxxcon fan to work right so my question is How can I change the cpu fan with a one outside the foxxcon aftermartket because I can not find the same! model is a P6000 P6741f series!

  really want your help, I won't heat my cpu!

  Thank you!!!

  Ryan. D

  Therefore, replace the fan with a new and new thermal interface materials.

  Check the time against the maximum allowed for your CPU. Temperatures 10 degrees cooler (in degrees C) thean max when you run a game requiring high graphics so stop worrying.

• Why window7 doesn't let me change the ip address?

  give my site a static ip address

  Describe in detail, exactly what you're trying to do and how you try to do.  Define exactly what that "don't let me" means.  If you see error messages, display their full text, not edited.

• I bought the Pro DC version and it still doesn't let me change the document'

  I am registered, he sees me, I click on the file edit PDF and it keeps giving me more it instead of the tools.  I connect to Adobe for help and he told me that my product does not come with support and my only option is to this forum.  WTH?  It's a pretty crappy Adobe customer service.

  Hi hdt2ski ,

  I would like to inform that it seems that you are still working in the Acrobat Reader program. Please install the Acrobat Pro domain controller so that you can use all the tools & also set this program as default PDF program on your system.

  Please see this link for Acrobat Pro DC (subscription) to download:- Download Adobe Acrobat DC (DC) | Company or VIP

  (With serial number then):- download Pro or Standard versions of Acrobat DC, XI or X

  I would like to know if it works.

  Kind regards

  Christian

• iMovie doesn't let me change still clip duration

  When I try to change the length of a clip duration iMovie still simply ignores the change I made.  Anyone know what the problem could be another r I use software that is more stable?

  There are two ways to change the duration of the clips.

  You can select the video and then click the Info button in the toolbar at the top of the screen (the one that looks like an 'i' with a circle around it), then set the time desired in the box on the right and then press return on your keyboard.

  Another way is to select the clip and drag the edge of the yellow box on the left or right.   It makes it easier if you develop first of all your clip with the

  The slider that is located near the button settings on the right side of your screen.  If you expand a little, sometimes the clip not going to reject the change.

• in the edition browser doesn't let me change the text, why?

  If for some reason, it allows me to change the images but no text? any idea?

  If the font that you are using is a Muse system font will convert these text boxes to raster images to render properly in the browser. This is the reason why you can't edit them in BIE as these text are actually images now.

  You will need to use one of the following font to make it editable in BIE.

  • Standard fonts
  • Web fonts
  1. Typekit Fonts
  2. Edge of the Web fonts
  3. Gites hosted fonts

  Kind regards

  Vivek

• Why a slide doesn't let me change the slide duration?

  I have slides with the audio, and I want the slide lasting only a few seconds longer than the slide audio so time reflects on how long the lesson is in fact. Most of them is right from 400 to 500 seconds now, whereas they should be much less.

  They have buttons that make a break for you move between slides. I tried to cut a wide blade or two seconds after the blade stops editing the slide properties and changing the time. It worked on my first 3 slides, but on my 3 last he does not accept the least time and jump just to some amount of time, it was before. For example, I want to slide 5 to 36 seconds in length, but it is currently at 453.3 seconds, and whenever I try to change it, it returns immediately.

  Calculate the calendar of the legend is not on, and nothing new appears on the timeline, after the blade stops at 34 seconds.

  Thank you!

  There is an element of the Clipboard which is 453.3.seconds. You cannot change the length of the blade to nothing less than the duration for which a element that is configured to display.