Help, stroke reacts only not to the order of the layers

Similar Questions

• Muse menu react only not to the widths as it does in design mode

  I work to make my website suitable and spin the issues with the menu. I have my menu locked on the right side of the screen so it slips in as the width of the screen becomes smaller. It works fine in design mode. When I saw my site in some dimensions, the menu continues off the screen instead of move. My biggest fear is one of my master pages which serves 17 of my pages. The menu works fine on 16 pages, but one page cut the last button of the half that remains out of the page.

  I also have problems in the foot with a block of text is centered on the screen. This is another case where it works very well on design mode but when I saw it, the text block is off to the right.

  Does anyone know how to solve these problems?

  I was partially able to solve this problem. I had two master pages who acted upward and to play with one, unlocked the menu resize and I was able to set the menu to lock, when unlocked it is lacking width sensitive. That solved the problem for one of my pages, but this is always the question. Anyone know how to unlock the menu resize? This seems to be the final fix that I have to finish my website.

• I do not see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not working, the video is blank (black) all, someone can help

  I don't update or download anything, so today, I can't see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not work, the video is all blank (black).
  When I restart my PC again the video can work just first video, then when I see another video site it's all black... (but its still working)
  can someone help me?

  Hi splingun,

  We have a section of fixing Facebook and YouTube. The black screen seems expressly included in the list of the articles I linked to you.

  Hope this helps!

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Remote control not working only not with the G10

  Hello
  my remote was working initially. now it does not work in Qosmioplayer or WinMCE mode. The red light in the receiver when you press the remote control in order to do not a dead battery! any suggestions as to what was popular up

  Hello

  Have you installed any other tools or utilities, or have you changed a few settings?
  As far as I know you need the infrared receiver only to control the MCE Win.
  The receiver is plugged into the USB port. Please check in Device Manager if the receiver is recognized. Also, check the cable of the infrared transmitter is also related.
  However, if you are working with the Qosmio player receiver should be removed from the unit.

  Moreover, in the user manual, you can find useful information about the remote control

  Best regards

• Pro - iPad applications 3rd party appearing only not in the settings

  Hello.

  I recently had an iPad Pro and loaded with about 30 apps. However, no third-party applications are appearing in the settings. There are only stock Apple apps more inside are Twitter, Facebook, Flickr and Vimeo - which I've installed Flickr. I tried to restart, but it has not fixed the problem. Any ideas what's happening?

  Hi oregonjoe,

  Congratulations on the purchase of your iPad Pro!  Can you tell me a little more about your missing apps?  Did you buy apps on the iTunes Store, or have you set your new iPad Pro from a backup from a different iOS device?  What specific settings you want to set? Notifications?

  Transfer the contents of an iPhone, iPad or iPod touch on a new device

  Take care

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• LVUTF-> RequirementID shows only not in the ATML report

  I use requriements gateway and I wanted to use the ATML report out the UnitTest framework in my project.

  The issue I'm facing is when I run the UnitTest framework on my draft report is ATML does not contain the elements of RequirementID.

  I belieave I configured it straight and I don't understand why it doesn't work.

  Gateway requirements comes with an example of using the ATML UTF report. When I run the test in the sample project, RequirementID tags appear.

  I have enclosed a snapshot of one of my 8 unit tests in my module: to show that I have set the RequirementID field in UTF configuration.

  However... I have no chance, and the report does not have the RequirementID.

  Any help would be appreciated.

  Maciej

  Ok

  Problem between the keyboard and the Chair.

  If you go in the project preferences, test infrastructure unit, there is an option to select additional details in the tests of success, failure, and error.

  It is not checked by default.

  When I selected the option the ATML now cointains tags RequirementID I wanted.

• F2 and F3 brightness keys not working only not on the DM4-3050US laptop

  I have a Pavilion DM4-3050US laptop.  The brightness keys don't work at all.  All the other function keys work fine, like F9 and F10 to volume.  I looked long and seriously and tried almost all of the solutions that I found, which it which seemed so promising: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Brightness-Controls-Stopped-Working-dm4/m-p/....  Nothing works, however.  I won't do a factory reset - no need to reinstall all the software for the brightness.  I also called HP and they offered replace the laptop, but still once, does not only apply to worsening brightness keys.  Does anyone have any ideas or suggestions?  It must be some sort of bug that HP is aware, no?

  Then work my F2 and F3 keys.   They began to apply when I have connected a Microsoft Comfort Curve keyboard to my laptop.  This prompted Win 7/MS update find software for the keyboard that I downloaded and installed.  After the reboot, I discovered that the F2 and F3 keys now dim and brighten up the screen.  I know that this will not work for others, it seems to be related to the installation of the keyboard software, but he has restored somehow keyboard settings that work even if I'm not using the external keyboard.

• CD/DVD drives not working only not on the two PC running Vista, heeeeeelp!

  Hi guys, two PCs, which is new, both running Vista decided that the installed CD/DVD readers shouldn't work!

  The new PC reads a CD/DVD when inserted (lamps flash to recognize this is something), then nothing (Autoplay is configured to use iTunes ) so I'm going to, click on 'Computer' on the disc, and he says "insert a disc into the DVD drive (f) "

  So, I installed the MS auto fix jobbie and it says ' insert readable media...» "I've had (several store bought CD and DVD all failed to save) then I tried to search the upper and lower filter using regedit, but there is no file with this name in the folder on the drive.

  Device Manager indicates that drivers are up to date, and the device does not work, even though I have many distinguishing!

  Apparently, it is specific to Vista, but suggested courses of action left me with an even worse urge to kick the bloody things around the House that I had when I tried to play the CD in the first place, any help from you lovely people would be most appreciated. Thank you, James :)

  Hello

  If you have too many programs loading CD/DVD they can collide with each other as they
  competition for resources. These will be workload often pieces of themselves in memory at startup
  so it will have an effect, even if not to use. If you have installed some of these
  lately trying to uninstall it to see if it has an impact.

  --------------------------------------------------------------------------------------------------------

  This troubleshooting help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• ReadyBoost Windows 7 Pro 64 bit works only not with the reader flash 32 GB USB high speed...

  Hello

  I did what I could find in support.microsoft.com search/read them all using ReadyBoost on my Windows 7 Professional 64 - bit, because he seemed much more cost-effective to install a properly sized USB key from the bombings of hundreds of dollars to replace and modernize the planks of installed RAM, I, 4x2Gb @ 1066

  My basic material is:

  Intel i7 920 CPU using Gigabyte EX58 - UD3R-MOBO with 8 GB of RAM installed 1066.

  According to the info I've read ReadyBoost, the ratio is 4:1 for the size of the Flash drive compared to installed RAM or, in my case, a 32 GB USB device.

  I had the OCZ Rally2 32 GB because it tested faster about 30 GB Read and 5 to 10 MB write.

  When I go to activate the USB 32 GB for ReadyBoost flash drive, I get the "impossible... to use this device to ReadyBoost...". "error message.

  TWO QUESTIONS:

  1 knowing that my USB 32 GB current is at a speed of 31 GB read/6-10 MB write and can be replaced if necessary:

  a. y at - it a necessary range of recommended read/write speed?

  2. further, saying: the range of tested USB disk read/write speed are correct or I will get a correct drive 32 GB and with 8 GB of RAM currently installed.

  b is it? or what is the advantage in any computer processing speed using a 32 Gb USB flash drive when it is 8 GB of RAM installed (knowing that a replacement/upgrade RAM is off-budget for the foreseeable future)?

  Finally, I pass first OCZ support but received no conclusive answers.

  1st answer to yesterday 20:11

  Win7 is limited to 32 GB size by device for ReadyBoost. I've seen this problem before when the USB key is at the maximum limit. Never seen a work around so.

  AND, more interesting for me, 2nd answer:
  Today 02:37

  Few people I know with this problem that I've never heard of a solution. I don't know anyone who devoted a lot of effort as with 8 GB of memory system is not a necessity for ReadyBoost so they just moved.

  NOTE: The support guess I are underutilizing the 8 GB of RAM installed. In fact, due to the needs work I will typically have anywhere for applications and utilities operating at 20-35 someone time, using 4-6 GB of RAM at peak use.
  Ideas?  Suggestions?
  Thank you.
  John

  Hi John,.

  A flash drive may appear to meet the requirements, but Windows may detects it not as compatible ReadyBoost if its rated speed measures sequential and random performance and performance is not always quick on the set of the flash player.

  Look for a note from the manufacturer that the flash player is Compatible Windows ReadyBoost. Not all manufacturers of this list on their packaging.

  You can check with another flash drive

  Answering your questions

  a. speed for Windows ReadyBoost requirements are at least 2.5 MB per second throughput for random readings of 4 kilobytes (KB) and 1.75 MB per second throughput for 512 k random entries.

  Using memory in your storage device to speed up your computer

  (Article is for Windows 7)

  b. ReadyBoost acts as a cache of HARD disc (hard drive) and is not a replacement for direct system memory. It will not improve processing speed, but will help the launch of faster applications and push background applications that serve much in memory reserved ReadyBoost.

  For more information, please visit the links below

  Turn ReadyBoost on or off for a storage device

  Using memory in your storage device to speed up your computer

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Problems with HP4620 not working only not with the other computers in the House

  I bought a HP 4620 for my house and it works very well with my Vista laptop wireless.  However, it does not show as an option for our office or our second laptop.  Any ideas?

  Thanks, Sunny12

  Hello sunny

  I was going through your posts and help you've been putting online...

  Answered by Mr. Aneesh, pilots refers to the software that we are supposed to install in the computer.  Thus, these drivers are available on the CD that you have with your printer...

  Now, as you begin to install, you will get the screens user friendly and just follow the instructions and proceed with the installation.

  The system, that is to say; the monitor (computers) will ask you how you are going to connect the printer to the computer...

  Thus, there are 2 methods by which you can connect your printer to the computer...

  (1) USB - this is a cable that you find in the box the printer, but you would have to buy separately.  so, if you do not, please get one of the stores.

  (2) wireless - in this type of connectivity, you do not need the USB cable, because you would then have a device called a 'router '...  And here... It is the router that establishes the communication between the computer and the printer.

  Please try the following and if you get stuck, let us know.

  Kind regards

  Ashokkan.

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give it a Bravo!
  I work for HP

• HP Solutions Center's appearing only not on the 8.1

  Using the new HP computer. Comes with windows 7 and upgrade to 8.1.  Installed my Office jet 4500 all-in-one wireless.  Then installed the 8.1.    Do not get the HP Solutions Center, so I can save the scans for emailing.  With the new computer connection was done without the disc.

  Please help in non-technical format.

  Bookwyrm

  Thanks, Waterboy, my son-in-law came by today and got it fixed for me.

• Gallery of Photoshop filters work only not with the "Unable to complete the operation" error box for PS CS6, CC, CC14, CC15 in Yosemite Mac, is produced in the Chinese version

  Hi all

  All Photoshop CS6, CC, CC14 CC15 have been updated in the latest version today. But the latest patch still does not fix the bug.

  Photoshop (Chinese simplified and Chinese traditional), just goes to show error message "Could not complete the operation" every time I click on a gallery of filters option. The issue started happening Mac Yosemite 10.10.2. No question too with the Mac version before 10.10.2.

  Version on Windows, it is normal, not this issue. I also tried using another language version of Photoshop, like English, it is normal without any problems. I also asked my Korean friend to use the software in Korean, no question too with Gallery of filters. But when I changed the language in traditional Chinese or simplified Chinese, the Gallery of filters will suddenly be not work with error "Can not complete the operation". When I change Photoshop to the other language, it will run normally.

  
  

  Here is the screenshot to understand clearly what I mean. It is not gray, it is not an accident. No crash no report at all. It simply doesn't get it.
  

  

  

  

  The problem occurs in ANY kind of file, it is not the specific problem of files.

  Remove the preferences, running file at startup, new account admin, uninstaller + Running cleaning tool + reinstall again, everything that I have tried and it solve anything. Therefore, it is not the machine question or account number. It also happens to other Mac Yosemite as well. In the past, there was no question too (before 10.10.2).

  In the internet (the Chinese language forums), there are many users who are also reports on the same subject, but still no solution so far.

  
  

  Below link, there is also another Chinese user who reported the same issue, but no response (I think because there is no problem in the English version, so that the staff of Adobe don't know what exactly, we face to)
  

  PHOTOSHOP CC 2014 - Chinese version traditional to the function of filter Gallery, unable to work on MAC OSX 10.10.2

  It is without doubt a BUG!

  
  

  I don't know the reason to find Mac Yosemite or because of defects in Photoshop. However, please solve the problem as soon as POSSIBLE because not all customers can understand English, especially us who comes from countries whose inhabitants do not speak English.

  * Sorry for the bad English, I spent hours just to write this post

  Hi all

  There is a patch to update to solve this problem

  http://blogs.Adobe.com/Crawlspace/2015/08/Photoshop-CC-2015-0-1-update-now-available.html

  I installed the update patch, and the problem is fixed in Photoshop CC2015 for Chinese version traditional & Chinese simplified.

  But the update patch is only for the PS CC2015 version, which means the question always remains CS6 and CC CC2014.

  At least, you can use your Chinese version of CC2015 first.

  However, when I tried to manipulate the dat inside Photoshop CC15 file and use it in CC14, my filters CC14 Gallery can also work now. And it can also solve the problem in CC PS too

• LogFilter appears only not on the Unix host

  Not able to get the officer of filtering the log to display on the dashboard for my unix host agent but it is display for my windows host.

  Hi James,

  Officials appear on the Foglight model when the agent referred to the FMS data and not before. The LogFilter agent must present only data of the FMS when occurs a match of error log file. It is likely that your LogFIlter agent that runs on Windows reported an error to the FMS but your Unix LogFilter agent has not yet. If and when that happens, you can expect the agent to model object to create and appear in the dashboard of the Agents.

  Kind regards

  Brian WHeeldon