HELP the call Video Editor - problem

I followed all the formats here

https://developer.BlackBerry.com/native/documentation/Cascades/device_platform/invocation/video_edit...

When this function is executed, the screen fades a bit then goes back to a normal screen brightness. This means he tries actually calls it but does not seem to want to continue. This also happens in some applications such as Blaq, during the sharing of the image in the Application photos of Blaq sometimes this also happens. I also tried the code below to 10.1 and 10.2 Z10 devices and an Alpha of Dev C.

This is a file that is spent and real and valid

file:///accounts/1000/shared/camera/VID_00000001.mp4

And that's my job

void VideoEditor::invokeVideoEditor(QString filePath)
{
    bb::system::InvokeRequest request;
    request.setTarget("sys.video_editor.card");
    request.setAction("bb.action.EDIT");
    request.setUri(filePath);        // also tried with this uncommented
    //request.setFileTransferMode(bb::system::FileTransferMode::CopyReadWrite);
    request.setMimeType("video/mp4");
    invokeManager->invoke(request);

    bool connected = connect(invokeManager, SIGNAL(childCardDone(const bb::system::CardDoneMessage&)),
    this, SLOT(onChildCardDone(const bb::system::CardDoneMessage&)));

    if(connected)
    {
        qDebug() << "CONNECTED: " + filePath;
    }
}

My Picture Editor feature works completely perfectly well:

void PictureEditor::invokePictureEditor(QString filePath)
{
    bb::system::InvokeRequest request;
    request.setTarget("sys.pictureeditor.cardeditor");
    request.setAction("bb.action.EDIT");
    request.setUri(filePath);
    request.setFileTransferMode(bb::system::FileTransferMode::CopyReadWrite);
    request.setMimeType("image/jpeg");
    invokeManager->invoke(request);

    bool connected = connect(invokeManager, SIGNAL(childCardDone(const bb::system::CardDoneMessage&)),
    this, SLOT(onChildCardDone(const bb::system::CardDoneMessage&)));

    if(connected)
    {
        qDebug() << "CONNECTED";
    }
}

Any suggestions please?

This works, however the docs were missing from what you had to do here.  I'll get updated.  For now, here's a snippet of code that calls the video editor.

bb::system::InvokeRequest request;
QUrl invokeUri = QUrl::fromLocalFile("/accounts/1000/shared/camera/VID_20131224_132306.mp4");
invokeUri.setScheme("videoeditor");
invokeUri.setQueryDelimiters('=', ';');
request.setTarget("sys.video_editor.card");
request.setAction("bb.action.EDIT");
request.setUri(invokeUri);
request.setMimeType("video/mp4");
InvokeManager manager;
manager.invoke(request);

Tags: BlackBerry Developers

Similar Questions

  • The identity plate editor problem

    Greetings,

    I'm trying to customize the "identity plate" in Lightroom 6 CC.  When you try to install the "style text identity plate" or the "graphical identity plate" the free "Melt" domain for free buttons I cannot change the font size.

    Regardless of the type of size I choose that it is up to 70, with result the 'import', 'Developing', etc. areas poorly displayed.

    "Below one can see that the font size is set to"11", and yet the"library,"develop", buttons etc. are too large.

    Plate1.png

    After a click on the 'OK' button and the 'identity plate Editor"re-opened the font size has been reset to '70.

    Plate2.png

    I need comments to work around or fix this problem.

    Thank you in advance.

    Rory

    It works well here.  You probably need to reset your preferences file.

  • Help, T420s display/video card problem!

    Hi all. I would be grateful for any input.

    Recently happened a lot with my T420s especially when I was on the video playback in full screen. The screen has suddenly become as the image, I enclose below, and there is no answer at all. Then after 30 seconds or more, the system stops. I suspected a problem with my video card overheating. BTW, the fan in my T420s works also like crazy all the time, I put in place with this since I have my laptop

    My last laptop was T61. With all the Nvidia graphics problem before, I am so afraid it would have hit me again. I would return the laptop immediately to Lenovo. I am writing my thesis now with this computer. Really cannot afford not having no not my computer for awhile.


  • Help the call of a batch of the projector file

    Hi all.  I have asked a number of questions here recently and have been very satisfied with responses, then here is one more for you.  I hope I can get another solution. :]

    I have a flash project acting as a menu and published as a .exe (projector).  In this file, I have a button with the following code:


    {Button1.onRelease = Function ()}

    fscommand ("exec", "openfiles.bat");

    }

    I have a fscommand folder (in the same directory as my flash file) that contains the openfiles.bat with a single line:

    Start MyFile.txt

    MyFile.txt is also located in the fscommand folder.  When I click on this batch file and run it, the text file opens properly.  However, when I click on the button in my flash file, a command prompt window flashes too fast to do with some kind of error message.  It says something not to find a certain directory and or in the windows directory by default.  I guess it does not find my batch file or in my text file.  I feel that as long as everything is in the fscommand folder, it should work fine.  Can anyone offer me any advice?  Thank you!

    http://www.Northcode.com/blog.php/2007/08/14/fscommand-exec-is-broken-in-Flash-CS3

  • I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.

    I have a problem in my iPhone 5 s while I call someone when on-call time at 1 hour of the call is disconnected and say call failed can help you me in this problem.

    What iOS version you are running. I've heard of it, but I heard no talk for a long time... You can update to iOS.

  • I just bought photoshop elements 13, but I can only access the video editor. Help please.

    Can someone help me understand why I can only access the video editor after you download photoshop elements 13

    It seems that you downloaded Premiere Elements rather than Photoshop Elements.

    Premiere Elements video editing =

    Photoshop Elements = editing still images

    Download Photoshop Elements from here

    https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-10-11-downloads.html

    If you received a serial number starting with 1057 then that is for Photoshop Elements. If the serial number starts with 1143, then it's a number of Premiere Elements.

    Brian

  • "Unfortunately Video Editor has stopped." - PROBLEM

    Hello

    My phone is a Verizon's Z3 Xperia.

    Recently, I was asked to download the latest version of the Android operating system which I believe is Lollipop 5.1.1.

    Since obtain this new version - when I try to edit a mp4 on my phone, when I go to save it, he pointed out several times, unfortunately "Video Editor has stopped."  I was able to use video editor before when I had the other version of Android on the phone.  for some reason, I also had 2 instances of the video editor on my list of applications in the Application Manager. Now, I have only 1. So after searching a response, I tried a few things such as clear data and cache on the video editing application in the settings on the phone. Someone said to uninstall the application, but it did not uninstall the application available.

    What can I do? Editing videos such as mp4s had no problem until I got Lollipop 5.1.1.

    Thank you very much for your help!

    Chrissy Edmonds

    @Chrissy_Edmonds

    Clear data > Force shutdown > restart the phone > check again

  • My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

    My Fire Fox download video in support not detected on you tube. It is always shows only the first video that i was downloaded.pls help

    I don't think there is much you can do about it outside the use of workaround to reload the page until this problem is corrected.

    There is this bug on this problem:

    I don't know if other extensions download suffer from this issue, as well, so you can try a little more try the website of the add-on and if possible use a different format like WebM, if they are available.

    Also note that not all videos are downloaded and registered correctly. Some may have a size of 0 bytes and fail to download, so, best is to check in downloads of the toolbar Manager in the drop-down list to make sure that the file size is correct (i.e. neither 0 bytes, but a more likely size).

    YouTube streaming makes changes to the code and the way its web pages work, so extensions can fail at any time.

  • Can't see the caller on my iPhone to make a video call

    How can I configure my iPhone 4s to display the appellant to make a video call. I can see me on my phone and the caller can also see me on their PC

    I found my problem: I had two of names/contact Skype different requests for the same person. Once I deleted a 'bad', everything worked and I could then see the video on my iPhone.

  • During the Messenger video calls, my picture freezes and the other person can't see me.

    When I make video calls, my picture freezes immediately and the call ends even. I can see the other person very well, but they can't see me. A message appears saying low quality call and suggest the driver update. I used the internal webcam and webcam external but still had the same problem.

    Windows Live questions should be handled by Windows Live Solution Center.
    Please repost your question to the Forums Messenger section:
    http://windowslivehelp.com/forums.aspx?ForumID=568c1adc-41d2-47E0-BB2C-cdfedd9642ef For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Hi all! Is it possible to show the caller with a video ID?

    Hi all

    My problem is that, suppose someone calling me and at the same time I want to see the CALLER ID and video. Please let me know if it is possible or not blackberry, if possible, how can we do?

    Your views will be highly appreciated!

    Thank you very much!

    Mahendra Singh

    Hi Simon,.

    You mean, we show a video as well in a predefined area of the screen and identification of the appellant by remaining part of the screen.

    Thanks a lot again! Simon, you were the first person here on the BB forum, who greeted me!

  • To make a video call the person who receives the call can't see me, but they can hear me, why?

    Original title: Microsoft lifecam

    To make a video call, the person receiving the call can not see me, but they can hear me

    Hi Eddie,.

    As the person receiving the call is able to hear and unable to see, we need to check if the video settings are set correctly.

    Which application do you use to make video calls?

    While you reply us with the above information, see the following links:

    From the following link, refer to the "I can't start a video call".

    Troubleshooting: Webcams

    http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/webcam/LifeCam-Setup

    How to make a video call?
    http://www.Microsoft.com/hardware/en-in/help/support/how-to/webcam/VideoCall

    With the help of your LifeCam with Microsoft Live Messenger

    http://support.Microsoft.com/kb/921332?WA=wsignin1.0

    Hope the above information is helpful.

  • Screen flashes different colors and freezes at the same time, there is a video card problem?

    When it gets really bad most of the screen will Blanch and freeze. This global problem cut in and out, but is common.
    Any help would be greatly appreciated.

    EDIT: I forgot to mention that it is a HP G62 laptop.

    Hello

    Yes, it could be a video card problem. Let me suggest that you run this Fix It routine: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-monitor-and-video-card-problems#.

    Let me know if this helps you.

    Kind regards

    BearPup

  • Audio problem for the downloaded videos.

    I am not able to hear the audio of any of the downloaded videos from you-tube. I tried with different mediaplayers (VLC, GOM, KMP). In some even video does not play while in others only the video plays (without audio). Please solve this problem.

    Hello, YogeshDorbala

    Check that your speakers/headphones are not on Mute, the speaker icon can be found in the system tray near the Date time &. Click on the "speaker" icon > make sure that the blue speaker icon is not set to mute it is to reactivate it.

    Please see the following link for more information on the no sound in Windows:

    Audio Troubleshooting Guide:

    Microsoft Fix It: Automatically diagnose and fix Windows Audio playback problems:

    Kind regards

    Smithy.93

  • The dvd on the s-video output display problem

    I think I am doing something stupid, but I can't understand it.  I used my T40p for many years, inclunding using the vga external display monitors and digital projectors player.  For the first time, I wanted to use it to view DVDs on a TV using the s-video output capacity.

    I activated the s-video and connected to the tv without problem.  My office is correctly displayed on the TV.  However, when I use the dvd playback software to show a dvd, the tv does not display the content.  The content of the dvd shows correctly on the computer screen, but not on the TV screen.  If I use the view "full screen", nothing shows up on the TV.  If I show only the dvd in a window, then everything on the desktop is shown properly on tv, except the dvd window is blank.  Yet once, it appears correctly on the computer screen.

    I have tried various software to media, including intervideo WINDVD and Classic Media Player player.  I tried PAL and NTSC discs.  No difference.

    I think I'm missing something obvious.  Any ideas appreciated.

    T40p 2373-G3U, 1600 MHz, 1 GB RAM, WinXPP SP2.

    1400 x 1050 with ATI Mobility Fire GL 9000 LCD display adapter display.

    OK, I solved this problem myself.  The solution is to use a configuration that uses ONLY the external display.  Apparently if you enable the output s-video, but do not turn OFF the LCD screen, the video card only then produces the dvd on the LCD, not s-video content.

    There are two ways to select the s-video output only.  Go to settings-> control panel-> thinkpad configuration.  In the window of thinkpad configuration, at the top left, there are five buttons to activate different display configurations.  One of them is "tv only".  If you click this button, the LCD of the computer stops, and the s-video output became active.  Showing a dvd in this configuration using intervideo WinDVD or other programs video display shows the contents of the dvd to the TV via the s-video output screen.

    The other way is to implement a model of custom view using the Director of 'presentation', which is accessible from the 'thinkpad configuration' window described above.  It is available under the "view" dropdown  I created a custom method called 'dvd' that automatically sets the external screen in 640 X 480 resolution.  This is consistent with my standard TV ntsc resolution and avoids the need to change the display resolution before you activate the s-video output.  I choose this plan using the key FnF7 is quick and easy.

    Hope this is interesting to someone out there.

Maybe you are looking for