Creation of recovery media after upgrade to 8.1 Windows

Similar Questions

• creating recovery media after upgrade to 8.1 window

  Hello friends. I have a lot of confusion. I bought a laptop on December 2012 with window 8 preinstalled and created the recovery media about 6 or 7 months later. And now, I upgraded my system to window the window store 8.1. And now again I would create a recovery media for windows 8.1. So my question is if I create recovery media on a flash drive usb and if in the future I want to reset my pc or reinstall my system, I'll make window 8 or 8.1 on my system. I'm not a computer expert. If anyone can help me please. Thank you.

  Hello:

  You will get Windows 8.

  If you want to do a recovery W8.1 image you can do the following...

  You can create a system image in W8.1 and save it on a portable hard drive or set of DVD as you might in W7.

  Instead of making a bootable cd as in W7, you need a boot flash drive boot. You can use a flash drive to very small capacity (256 MB) for the startup recovery W8 flash player.

  Check out these links for more information.

  Create the image of the W8.1 system:

  http://www.hanselman.com/blog/CreateACompleteSystemImageBackupWithWindows81AndFileHistory.aspx

  Create bootable W8.1 flash player to access the system image.  Don't forget, you can use this drive, you can boot from it and access the system image you created on DVD or a portable USB hard drive.

  http://anewdomain.NET/2013/09/13/create-USB-recovery-drive-Windows-8-1/

• T430s and create recovery media after upgrade to win 8 Win 7

  Is it possible to create a recovery media after upgrade to Windows 8 of a factory installed Windows 7?

  You do before the upgrade.
  NO.

• 500 - 81ea: create recovery media after upgrade to windows 10

  I created a USB recovery when I used my PC (using the 8.1 window)

  I had a time to use it to perform a destructive restore but then had to wait for all the upgrades automatically install to get me back to where I was and of course all my other software such as iTunes and music, photos, etc.  Checking to see if I can upgrade to windows 10 I was informed that my windows was not up to date and that I didn't know the logo windows at the bottom right of the screen. I have now been in the screen of windows update and installed quite a few updates and now have the upgrade of windows application.  My question is if I upgrade to windows 10 and then must perform a full recovery can I do new media of recovery or I'll have to go back to windows 8.1 using my existing media and then updateHP software and windows 8.1 and upgrade to windows 10 and the free update will be always available or is there a way I can create new media recovery to allow me to recover Windows 10 OR an altrnative goes back to the creation of a backup drive on an external hard drive and a way to get this image on my HDD internal. OR to simply stick with windows 8.1 and hope, that it is taken in charge as long as XP was.

  THANKS IN ADVANCE FOR ANY HELP

  JIMBO

  Hello

  First things first. Don't forget that your USB stick recovery is the HP external recovery media and not just another type of recovery image. Back up your data. Check that your PC is supported by HP for Windows 10 and that your PC meets the requirements of Windows 10. If so, then be sure your Windows 8.1 system is fully patched and up-to-date with Windows and HP implemented to date.  When you make an in place upgrade W10, W10 process will have a roll back feature that will be available in case you are not happy with the W10.  I made a couple of back roller and the process was pretty quick.

• Stream7 create a recovery media after upgrade to win10

  unboxed my stream7 a few days earlier and let it update and got the 'time to get win10' icon in the systray.  I created win8.1 media restoration until I take the not... so I can go back to a clean win8... because I have now about free 3.5gig after the upgrade on mem drive.  (it's why I want create recovery win10 media... I have none left of disk space!)

  In any case, when I try to create a restoration of win10 disc... I select the check box for the system files and it works a little butthen I get this cryptic message on the screen and a button 'Finish'... but no recovery drive.  If I do not select the system files, it will erase the disk and copy data to it, but this isn't a recovery disk... There is no need to re install win10.  This is win8.1bing, so I can't use the creator of media 10 victory as I have no key... I have to use the recovery media.

  any ideas?  I really like win10, but I need my space rear disc and I want to get rid of all the win8.1 on the driv cruft.

  Thank you.

  To answer my own post... Apparently, simply wait 12 hours. (He was not an update, at least I think... I got the auto update service stopped and the Tablet off all night)
  
  When I tried again this morning... It took about 2 hours, but he had completed the restoration of the road. Another 2 hours and it increased by win10 running, but the screen would not rotate automatically. The fix for that float around these forums. Basically you reinstall the driver win8.1 for HP accelerometer. And boom, in fact.

• model 550-223w: cannot download the recovery media after upgrade Windows 8.1 for Windows 10

  Buy computer with 8.1 Windows preinstalled on July 9, 2015.   Downloaded disc recovery media for Windows 8.1. Elected to download Windows 10 and even installed on July 30, 2015.  Attempted to download the recovery media for Windows 10 but refused because 1 only one download is allowed.  How can I get the computer to download Windows 10?

  For some reason any warranty start date is also may 5, 2015 instead of the date that I registered the computer with HP.  How can I change the start date?

  See the link below

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

• Creation of recovery disks after upgrading to Windows 7

  My laptop was provided by Toshiba with Vista. He was eligible for a free upgrade to Windows 7. I did it. Problem is that the recovery disk is for Vista.

  How can I do a recovery for my laptop disk, because it is now the Windows 7 operating system?

  What folder of hard disk image:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  If this option is still available, you can restore Vista and make a recovery disk.

• "Partition recovery has been deleted" Message in creation of recovery media

  HP Pavilion 2205tx - C5j09PA #UUF G4

  Windows 8 64-bit

  "Partition recovery has been deleted" Message in creation of recovery media.

  I bought my new HP pavilion laptop G4 two days ago only and has not changed anything in the two players named drive C: for windows and D: for HP Recovery.

  now, I want to do a recovery with the HP Recovery Manager software disk.

  but it shows a Massage: "Recovery of Partition was deleted" Recovery Media creation section.

  in the recovery Partition my computer is almost full (3.26 G 25.5 G is free). so I think that there are current recovery files.

  I have not access to HP to buy recovery disk or call support.

   

  Thank you

  I don't know why your PC is saying your partition disappeared - you're right, it seems to be missing. I know that if you use the wizard to help to make your recovery disks backup copies and then ask him to remove the recovery partition to give you more space on the hard drive, it will remove the factory image HP of Windows 8 for the recovery partition and let the normal Windows repair tools.

  There are tools, but which allow you to create your own recovery partition full with these tools of Windows repair and a new image of your instalation so that you can restore from that. You can use this tool: Windows 7/8 - creator of Partition Recovery OEM available here: http://forums.mydigitallife.info/threads/21978-Windows-7-8-OEM-Recovery-Partition-Creator but it's a lot of work and it would be faster and more easy just for your data backup and restoration of your HP recovery disks made you from the support Assistant. If you did not the disks, HP can opt to send you a copy... they do not normally this but I read that some people have luck to get a free copy of HP media... otherwise, they want you to buy recovery disks ($40.00). I guess it depends on the exact terms of your situation.

  An alternative is to use Macrium Reflect Free Edition to ghost or clone your system. You can then restore your entire system even with your custom programs installed, to the exact state it was when you made the backup image. (this may take several dvd) I suggest that you go down that road because your system with Macrium Reflect restore is much faster than restoring from the HP recovery discs. Even if you do not get another copy recovery disks, you must use this tool to make another backup that you can customize to your liking. Your re - installs will be faster, they will already have your chosen installed software, and you will save wear on your HP recovery disks.  You can then delete the recovery partition to regain this space on your hard drive (since you cannot access in all cases, you will not need this space being taken up).  BUT... you cannot restore Mode UEFI which is what HP comes with. You have to go into your Bios settings and switch in the Legacy Bios mode (which disables the secure boot) FIRST or else the Macruim recovery boot disk will not load to install the recovery image. After the system re - installs you can go back into the bios settings and disable bios Legacy and reactivate if secure boot you want. (Windows 8 charge mode UEFI bios active secure boot or Legacy mode... it's your choice.) UEFI mode will load faster, but it will cause problems if you want double boot the system with another OS) hope this helps.

• We live errors in the creation of recovery media. Please try again

  Hello

  I bought the windows 8 hp pavilion series laptop and tried to create the recovery with blank disc DVD - R disc.

  While burning data first drive the HP Recovery Manager application up the pop-up message like "we live errors in the creation of recovery media. Please try again' with the OK key.

  Press the button Ok app closed automatically once.

  Model laptap

  HP Pavilion n003tx-15 Notebook PC (Windows 8)

  Please someone help me.

  Thanks in advance

  Concerning

  Trehout

  Have you tried to burn in Mode safe?

  http://support.HP.com/us-en/document/c03481733

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• HP Touchsmart 23-d055: do I need a new recovery disk after upgrade to Windows 10?

  I upgraded my 2 years, HP Touchsmart in Windows 8 for Windows 8.1 for Windows 10. It took me 6 hours to run all of these updates.

  Now, HP Support Assistant keeps reminding me to create an image of system recovery. But when I run the recovery media creation utility, it warns me that he goes back to the original operating system (Win8). Is it possible to create a recovery image system for my machine on Windows 10?

  I know that Windows 10 now has an automatic recovery partition. But I am concerned by the failure of the disk, which would make this unnecessary partition. Last year, when I've upgraded to win 8.1, I had an alteration of the disc that has occurred without known reason. I lost everything on the PC and to restore Win 8, and I've never touched the PC up to 10 Windows free update is out.

  I created a USB Win8 recovery disk when I got the machine. This is my only alternative? I suppose that if I ran the recovery media creation utility, it would recreate just the same.

  BTW, I know that HP has here a document, but it does on computers provided with Windows installed 10.

  • HP computers - create and use a Microsoft recovery USB drive (Windows 10)
  • http://support.HP.com/us-en/document/c04641788

  Thank you for your help and experience.

  Since no one has replied with an answer to my question, I've finally worked it on my own. I learned that you cannot make a new recovery disk system after the upgrade to Windows 10, if you had already created one when you got your machine under Windows 8.x

  Context: after upgrade to Windows 10, the HP Support Assistant kept prompting me to create a system recovery disk.  I did one when I got the machine 2 years with Win8.  I didn't replace my original recovery disk, so I went out and got a new 16GB USB flash drive. When I inserted this new drive and attempted to create a recovery disk, the PC told me I couldn't do one, because you are allowed to make a recovery disc by PC.

  So it was kind of stupid that after completing the upgrade of Windows 10, HP Support Assistant tells people to do. It should just check itself and see if a disc has already been done. All this anguish for nothing!

• Generation of recovery media after changing Windows 8 for Windows 8.1

  How can I create new media recovery on the 8.1 of Windows after changing Windows 8? HP support says that only 1 set of recovery media is allowed. My original game is to Windows 8. You want to avoid having to go through the lengthy procedure of update in case I need to go through the process of recovery with my original support recovery.

  Hi @john_f_g ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your HP laptop and needing to make a new copy of Windows 8.1.

  Software recovery of HP and Microsoft allows you to make only a backup recovery.

  You can order new media disc or USB flash device of here.

  Thank you.

• Twonky Server don't scan actions media after upgrade to 4.1.204.33661

  After upgrading to the latest firmware (4.1.204.33661) the Twonkymedia server seems like it is in normal operation. However, no media file appear in its database.

  I disabled and enabled the server media in the management console, but that did not help. Also the server Twonk reset did nothing.

  I'm doing something wrong?

  Hope someone can help me.

  Sincerely,

  Frank

  Hello, Alexander.

  Please navigate to, nasip:50599 (where 'nasip' is the current IP address of your NAS) (note that if 50599 does not return the interface user Web Twonky, substitute 9000), go to 'Sharing' and 'Add a new folder' to select your media actions.

• creation of recovery HP dv6t 7200 quad edition for windows media 8

  I just bought HP Dv6t 7200 quad edition laptop computer with OS windows 8. I would like to create a recovery media in a drive or a USB stick. So, I went to Recovery manager to create a recovery media. A window pops up saying "you are allowed to create only one recovery media"... I checked the box and click on continue...

  Another window pops up asking me to insert the media... then I plugged in my usb flash drive. After that he never went to the next screen. It dealt with something or some process was running... It has never detected the flash player.

  

  Can I create recovery media in a DHM.

  Please help me with the process of creating a recovery in EHD or flash drive media.

  Thank you

  Murali.

  Hi murali3955,

  Have a look here and let me know if this helps solve your problem.

  Good luck!

• That means the creation of recovery media requires 5 discs?

  Hello

  I want to create recovery discs using HP recovery media creation, but unfortunately, the program wants to consume up to 5 discs DVD. I thought: why it takes 5 when someone told me that two he needs? I have no idea of what is the image of the system, but apparently it's much bigger than I imagined.

  The reason why I'm performing this process is to remove my partition recovery, who sits there wasting space.

  Is there something wrong with this program of recovery or it's?

  Hello:

  I guess I was not clear...

  You make restore disks with the utility making recovery disc in the menu programs.

  If you have already done this, then that's all you need to do.

  If you use it, then all you have to do is to insert the floppy disk 1 into your DVD player and start it.

  Then you follow the prompts and insert the rest of the disks when you are prompted.

  Paul