Help the customer to secure mobility; Untrusted Cert questions

Similar Questions

• Connection to the local network after the connection to the Client AnyConnect Secure Mobility Client

  I connect to my network of business using Secure Mobility Client of Cisco AnyConnect.  Once connected, I can no longer print on my printer LAN attached and other local resources.  I use the router E4200 of Cisco/Lyncsys on my local network and can re - connect to storage on the local network by putting in place of Port Forwarding port 21 and the sharing of MS Windows FTP folders.  However, I can't connect to a client of the Terminal Services by transferring port 3389.  Is there a way to connect to the local LAN after scoring in the VPN connection.  I can connect to sites HTTP/HTTPS regulars and more than another type of connectiins, just not my own local resources.

  Thanks in advance... JS

  Happy to help, for what it's worth. Please mark question as answered if it is indeed and rate if the response is useful.

• Help the evolution of security questions and answers that the quick instructions do not work because they say to click on / use the prompts are not there!

  Went to quick help with trouble with memory security question answers, b/c I don't remember my answers of course. And so... the instructions were to connect to the Apple ID account, then click on the security option, and then he said to click on security questions of rearmament (1st issue), which was NOT the case to be found. It has been mentioned that if it wasn't an option, then that may mean that you do not have a rescue located in your account email, BUT I DO. Another potential problem that was mentioned was that I could possibly try to answer the questions too often wrong and there will be some time before the option reset the q would be available again (or at all exist in the 1st place, I expect). But the actual amount of the supposed time out time is never mentioned anywhere, and the reset option is not appear after a period of time I wait and start again to try again. So, what's the problem? Idk what to do, if someone knows the answer or can help so I must not call technical support that would be amazing! Thank you very much!

  -Sincerely, daughter of Tech-illiterate.

  If you know your password Apple ID, what ever you do the call will last about 3 minutes.

  Is - not worth the time to solve the problem?

  If your email address of rescue has never been verified, it cannot be used. The time-out period is not mentioned as part of the character course of these processes. Why share with someone trying to hack your account how long they have to wait to try again?

• Helps the custom of the defined functions.

  Hi all
  
  I need some input from you guys.
  We have a bunch a text files (all are in the same format, so I have the privilege of using the single rules file for all the files of th.) submitted by professional users.
  Admin needs to load that data to the Essbase which is straigtforward if these files are located in a few. But they come in hundreds which is unnecessary work to load.
  So I decided to create a CDF that will merge all the files in the selected folder and create a unique big text file. Now I have ready Java with me class to merge files and don't know about the next steps. Could you get it someone please let me know the next steps in detail to make this work function. I've mentioned a lot of sites and am able to understand how it works and still little confusion there.
  We use the Hyperion 9 x.
  
  Thanks in advance,
  HYPUser

  If the udf file does not exist you can create it and place your pot inside.

  You can update the udf.policy to add something like

  Grant codeBase "file:${essbase.java.home}/... / java/udf/yourjarname.jar"{}"
  permission java.security.AllPermission;
  };

  If in your class, you are simply wanting to run the Main method then there is no need registration and you will just use
  RUNJAVA your_package_class_name

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Security Server SSL Cert question...

  I saw installed locally in our local network, I am now trying to install it in order to outsiders can get their desktop computers. I'm reading the documentation on the SSL certificates on the Security Server, but I can't find anything specific to this instance. Can I just use the same procedure as the login server (get the cert from our local CA - which is one of our domain controllers) or do I have to get a public place like Entrust Certificate?

  Thank you.

  You should be able to do without IIS.  Check out this KB http://kb.vmware.com/kb/2032400

• Help the flicker of screen HP Elitebook 8460p & question flashes and upgrade.

  Greetings,

  I have a problem with my Elitebook 8460p. My old servant me service for 3 years. We have a good relationship with highes and downs. Changed hard drive, the improved Rams, monthly cleaning and etc.

  In any case; I have a problem with flickers and flashes. When I push the start of (the computer On / Off), some strange black lines appear and never went. The funny part is that the black lines, flashes / flickers become crazy when I touch the touch pad. But if I touched the touchpad of the black lines just less.

  Things I've done;

  Electrical parts Checked - no electric leakage (verified to the ohmmeter)

  I tried to run with AC and battery - nothing has changed.

  I've been handicapped ambient light sensor - nothing has changed.

  I've been disabled touchpad - nothing has changed.

  Formatting, update the BIOS to the latest version of w7 updated, no unknown device, performed stress test CPU GPU & played back & assemble nothing has changed.

  My suspicions;

  CPU because this computer VGA card integrated with CPU. Change CPU, maybe to fix any problems.

  I want to switch my computer to my choice and i7: Intel Core i7 - 2670QM.

  My booking / questions;

  Intel Core i7 - 2670QM CPU is compatible with my Chipset QM67? If it is compatible; What should I do? (Updated the BIOS, or different version of BIOS etc..)

  I have some information on this situation and my laptop.

  

  

  

  Video

  HP Elitebook 8460p series using Hannstar MV6 and my motherboard is same. No VGA. I will not worry the my solution. If I'm wrong; I spend my money for nothing.

  I'm waiting for your answers.

  Thank you.

  Really? No response. Thanx HP.
  I found the answer.

• Failed to download or run the customer of Cisco Anyconnect secure mobility

  I'm trying to download and install the VPN client on my laptop to access my work computer.  I tried the automatic online download and received this error:

  "Cannot install the Client AnyConnect Secure Mobility Client 3.1.00495 with the Installer error: incorrect function."  A VPM connection cannot be established. »

  I also tried the manual download, but my computer won't run the executable.  I'm running on Windows 7 64 bit.  Any help would be appreciated.

  You can try the fix below.  The user made the same mistake.

  https://supportforums.Cisco.com/discussion/11916796/AnyConnect-secure-mobility-client-3100495-Installer-error

  "I was able to install the client correctly by creating a new temporary user account and uses this account to install the client on a global scale on the machine. After successful installation, remove the temporary user account. It worked for me and it was easy. It may not work for all instances of this issue. »

  I hope this helps.

  Please evaluate the useful messages.

  Thank you.

• Cannot connect AnyConnect Secure Mobility Client IPSec 3.0

  Hello

  Our company has a configuration of IPSec VPN on a Cisco ASA 5505.  We previously using the Cisco VPN Client - Version 5.0.07.0410.  Everything worked well with this customer to date.  The problem is it is not supported in our Virtual Machine, and environment with our new version of our networks paravirtualized drivers we get the problems of inadequacy HMAC and not connect to.

  I created a file .pcf with the following information for the 5.0.07.0410 customer:

  Input connection: VC VPN

  Description: no

  Host: xxx.xxx.xxx.xxx (IP address of the Interface of the ASA VPN)

  Authentication group:

  • Name: The name of the Group
  • Password: password for pre-shared Key

  Transport:

  • Activate Transport tunnel
  • IPSec over UDP (NAT/PAT)

  I import the .pcf file in the client, the client connects, you are prompted for AD username - everything has worked well.

  We have currently met that he had to use the Cisco AnyConnect Secure Mobility Client (3.0.0629) - I tried to use the profile for that AnyConnect client editor and I can't not all profile options.  I leave all the defaults preferences (Part1), preferences (Part2), backup servers, matching certificate, Certificate Enrollment and the mobility policy.

  I in the list of servers, click Add.  I enter in the hostname, host (the host name IP address) address and group.  There are no backup servers, I change the main IPSec protocol, save the profile and place it in C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile (Win7).  Open the AnyConnect Secure Mobility Client and the profile is loaded. Trying to link returns "VPN Agent is unable to establish a connection."  ASA, I don't even see a connection attempts to the outgoing IP address.  On the client, I can ping the ASA and connect with ordinary VPN Client.

  I can't find a place to enter a pre-shared in the profile editor.

  The AnyConnect client seems also not to read the .pcf files.  Am I missing something here?

  My package DART from the failing client is attached.  Any help would be greatly appreciated!

  Kind regards

  Rich Alto

  Rich,

  AC uses IKEv2 (for IPsec) which is not yet supported on SAA. Support is planned for 8.4 ASA which is still at least a few weeks.

  HTH

  Herbert

• Problem installing Client AnyConnect Secure Mobility Client 3.0.3054

  Hi all

  This is my first post and I hope that someone can help me with my problem.
  I'm trying to install the Client AnyConnect Secure Mobility Client 3.0.3054 on my PC (Windows 7 Professional 32 - bit operating system) and
  I get the following errors.

  Cannot install the Client AnyConnect Secure Mobility Client 3.0.3054 with the Installer error: fatal error during installation. Cannot establish a VPN connection.
  The acsock service failed to start due to the following error: a device attached to the system does not work.
  Please notify.
  Thank you.

  Anna,

  I had the same problem. Have you found the solution in some way?

• Policies that screw the customer

  As a huge fan and long time Adobe software user, I am deeply frustrated to have to write this.

  I've used Adobe products for years and encouraged my husband to learn how to use them by getting a subscription Creative cloud a year and half ago.

  Never learned to use the software, there is the subscription during this period. He auto-renouvelé about 8 months ago and, without realizing it, he got locked in a contract for a full year.

  When we tried to cancel it, we were informed that they would be penalized $ 100 for the cancellation of an annual contract that did not explicitly accept.

  This policy does not help the customer, it completely screws the client. Now, I am so angry that I don't even want to use Adobe products (and I've used them every day for 24 years!) I'm Livid.

  The customer service representative, who helped us was beautiful and able to give 2 free months of service, so the $100 would eventually be the same either way.

  Unfortunately, this does solve the problem. I want my husband to be released from his contract without financial penalty. Now. I still have my account and it may return someday, even if us two piss so much that it makes us think twice about this topic.

  Please, Adobe, improve your customer service and do not block your people in the contracts of the year after having been good customers. It's the golden age of the customer service, this kind of problem should not exist.

  Can you please release my husband from his account without financial penalty?

  I send a message about the cancellation, please check & respond.

  Concerning

  Baudier

• Global Application contexts - where to set the identifier of the customer?

  Hello
  
  
  
  I try to use contexts of global application in the context of an implementation of fine-grained access control.
  It is an e-Business Suite environment, more precisely of CRM, is a multilevel environment.
  Users access the two screens and OA framework based forms.
  
  I think I need to use the global application contexts because users can have multiple database sessions.
  In addition, all users login using the same database connection account.
  
  As much I can define a unique identifier for a user who persists throughout all their sessions I do use set_context settings, username and client_id below: -.
  
  
  DBMS_SESSION.set_Context (namespace = > 'XXUOM_CONTEXTS',)
  attribute = > "EXEMPT_FROM_VPD_POLICIES"
  VALUE = > l_exempt,
  username = > USER,
  client_id = > pi_user_id);
  
  
  The problem I have is to find a suitable place to set the client identifier.
  
  I don't know if the value is to be eliminated by another code or if the value is not used in all sessions.
  
  
  I use: -.
  
  
  DBMS_SESSION. Set_Identifier (pi_user_id)
  
  
  The tables that I call after insert triggers either icx_sessions or fnd_logins.
  
  
  However, the identifier of the customer is always null when I question him within the application, through: -.
  
  
  SELECT SYS_CONTEXT ('USERENV', 'CLIENT_IDENTIFIER') of double
  
  
  If I put the value via a rule of customizing a form, the value remains.
  
  
  
  
  I would be very happy if someone can advise me on where I'm wrong.
  
  
  
  
  Andy

  Thanks a lot for the pointers. Add DBMS_SESSION. SET_IDENTIFIER (FND_GLOBAL. User_name) does the work.

  Good.

  I want to say that this is the solution to my problem, but I am hesitant on the change in package FND_GLOBAL that there is no guarantee that it will not be overwritten by Oracle as part of a future patch/upgrade.

  It is not supported and it will be overwritten for sure.

  The patch proposed in [ID 1130254.1] is no longer exists.

  Log an SR to get this fix (or a replacement).

  Thank you
  Hussein

• AnyConnect Secure Mobility Client, the Module of access network, wired PEAP

  Hello

  I tested AnyConnect Secure Mobility Client, Module of access network as supplicant with PEAP authentication for wired network users. With the default configuration it works well.  With the default configuration is to trust the root CA certificates installed on the operating system.  Do you know how to set up NAM that it will validate certificate ACS with specific root CA certificate?

  In the profile Module of access network Editor, there are two options on the certificates:

  One is trusted certificate authority which has two options by its self first is too trust any certification authority root certificate that is installed on the operating system and the second is to import root CA certificate in the profile. Potentially second option can help in my case, I can manually import certificates of CA root in each profile. But I think it will be difficult to update root CA certificates in the future in this way.

  Second is Trusted Certificate Server rules, this option have corresponding capacity in certificate common name.  For what can be used this option?

  Capture screen I have attached included the path to the exported root CA certificate. What I did was the Root CA certificate to export to a file and include that cert in the profile (it's manual CA supply directly via the profile editor).

  If you have already added the CA certificate root in the trust store client certifcate through a Group Policy object, you can select the other option "Trust root certification authority installed on the operating system", which will work fine.

  If you do not have an internal root certification authority to issue the certifcates and rely on self-generated certificcate ACS management and for EAP authentication, you need to include the generated certificate locally each device in order to have the confidence of the customer the CSACS device.

• AnyConnect Secure Mobility Client customer support and helpdesk

  I am trying to establish a gateway VPN ASA (9.4. () 1). all users will use the AnyConnect Secure Mobility 3.1.1 customer and two factor authentication.

  I discovered that a VPN client can establish a VPN connection and successfully can access resources internal campus of the computer.  Split tunneling is enabled, so internet access in general is through the ISP of customers.  Everything works as expected.

  My problem is with our internal campus helpdesk support staff helping remote VPN users with problems of local user on the PC.

  Technical support personnel can target the VPN device by IP address provided by the ASA IP Pool. and can remotely on the PC with DameWare for local users

  Mini remote control software. Because our remote user have no local administrator rights on the PC support staff must perform a 'switch user' and log on to the PC with their powers. Immediately after the connection to technical support staff the VPN tunnel is removed from the VPN gateway.

  What I understand to read some documents it's normal behavior by default.  What I want to know is a way of turning off this feature?

  Short to make each a local administrator on their PC is an alternative method to allow support personnel to access the PC like themselves?

  I don't know if it will work with change user, but you can set the parameter to true and set it to any user "retainVPNonLogoff".  The helpdesk can then remote, disconnected from the user and then sign in as themselves and the VPN tunnel will remain in place all the time.   It might work with change user too but I have not tested that.

• How to close the untrusted cert prompt dialog programmly?

  Hi all

  As the Titus.  How to close the untrusted cert prompt dialog programmly?  SocketConnection.Close, InputStream.close, and OutputStread.close do not work.     I would like to finish the thread connetion taken if the user takes no action within 30 seconds.

  I thank you,

  Forest

  You can't close these dialogs programmatically, except maybe the injection of the event. they are part of the security system on the blackberry.

• Using transform (MST) and group policy to install the Cisco Secure mobility Client

  I created a modification transformation .mst file to install the Cisco Secure mobility Client.  I installed the client by using Group Policy.  When I rebooted my computer that customer installs and restarts.  Is there a property that I can add to the transformation so that the restart will not be required?

  If I do the installation using the MSIEXEC command, I can use the /norestart variable.

  Thank you

  Alex

  Alex,

  For some reason, the screenshot not attached to my previous post.

  It must be visible on the 'Table' tab, then 'Property' field in your MSI Editor tool.

  

  HTH!

  Kind regards

  Nick