help the procedure...
Hello world
I created the following procedure to create a table and insert with select data, the procedure being executed very well but when I write a query using the table "mrsa_admit_date", and then he throws me an error with "table or view does not exist.
Lost something here?
With the help of oracle 11g
create or replace PROCEDURE P_MRSA_STEP3 AS
BEGIN
run immediately 'truncate table mrsa_admit_date;
insert into mrsa_admit_date
Select A.pat_id, A.pat_enc_csn_id, P.hsp_account_id, min (A.effective_time) in the Admit_date
of clarity_adt@clarprod A
inner join mrsa_cms_units mcu
On mcu.dept_id = A.department_id
Join hsp_account@clarprod P internal
On A.pat_enc_csn_id = P.prim_enc_csn_id
-where
-P.hsp_account_id = 12226392031
-In (10610792118,41567152070)
A.pat_id, A.pat_enc_csn_id, P.hsp_account_id group
commit;
END P_MRSA_STEP3;
Thank you.
Well it is because you have no code to create a table. You have a truncation, and then an insert.
Tags: Database
Similar Questions
-
The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to solve this problem continue with Apple iTunes... help solve me this problem and the compensatory jewelry
Double-see your message, my first response to this topic tells you how to contact iTunes Support (we are fellow users): Re: the procurement process of the Clash game Clans the amount was deducted from the iTunes account and do not have t...
-
Impossible to make it appear in the volume icon notification area. Have you tried all the procedures of sugested suggested on Microsoft Help.
Try this:
In the run box type: regedit, click OK
Navigate to:HKEY_CURRENT_USER
\SOFTWARE
\Microsoft
\Windows
\CurrentVersion
\Explorer
\TrayNotifyRight-click on icon stream, click on remove, restart your computer.
The icon stream all will return.
This works on most of the configurations.
You may need to do a few times. -
has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!
Hello
I suggest you to follow the steps in this link and check if it helps:
It will be useful.
-
Problem with the procedure. Help, please
Schema: HR
Here is the procedure I created, when I compile the procedure it works very well and without errors or warnings are displayed. However, when I run, I get "01031. 00000 - "insufficient privileges" "error. "I tried 'GRANT ALL HR', 'ANY GRANT to HR'.," to HR WITH ADMIN OPTION GRANT ' nothing works. Not sure is code that has questions or privileges.
create or replace procedure new_create_PROC IS BEGIN EXECUTE IMMEDIATE 'CREATE TABLE NEW_CREATE1(EMP_ID NUMBER,EMP_NAME VARCHAR2(20))'; END; / EXECUTE new_create_PROC; TE new_create_PROC; /
Help, please.
You are connected to the DB under what user? You must grant this user the CREATE TABLE privilege.
-
Hello
Can someone help me with the procedure below. It seems to me, but I'm unable to turn it and get the error.
"Error (8.36): PLS-00103: encountered the symbol"UNDER"when expecting one of the following conditions: (- + case null new mod continue County avg current prior min max sql stddev sum variance execute forall time timestamp interval date fusion pipe)"
CREATE OR REPLACE PROCEDURE ddl_create_proc(p_table IN varchar2) AS i_stmt varchar2(200); BEGIN dbms_output.put_line('starting....'); i_stmt := 'create table'||p_table||as 'select * from emp'; execute immediate i_stmt; dbms_output.put_line('procedure Ended'); EXCEPTION WHEN OTHERS THEN dbms_output.put_line('EXCEPTION '||SQLERRM||'MESSAGE'||SQLCODE); END; /
Thanks in advance!
Hello
user782973 wrote:
Hello
Can someone help me with the procedure below. It seems to me, but I'm unable to turn it and get the error.
"Error (8.36): PLS-00103: encountered the symbol"UNDER"when expecting one of the following conditions: (- + case mod new null continue County avg current min max sql prior stddev sum variance execute forall time timestamp interval date fusionpipe" ").
- CREATE OR REPLACE PROCEDURE ddl_create_proc (p_table IN varchar2)
- AS
- i_stmt varchar2 (200);
- BEGIN
- dbms_output.put_line ('starting...');
- i_stmt: = 'create table ' | p_table | as ' select * from emp';
- immediately run i_stmt;
- dbms_output.put_line ("'procedure completed");
- EXCEPTION
- WHILE OTHERS THEN
- dbms_output.put_line ('EXCEPTION' |) SQLERRM | ' MESSAGE' | SQLCODE);
- END;
- /
Thanks in advance!
In addition to what others have said, whenever you do the dynamic SQL code, display the value chain before you run it, like this:
CREATE OR REPLACE PROCEDURE ddl_create_proc (p_table IN varchar2)
AS
i_stmt varchar2 (200);
BEGIN
dbms_output.put_line ('go... ») ;
i_stmt: = 'create table ' | p_table | ' in select * from emp';
dbms_output.put_line (i_stmt |) '= i_stmt in ddl_create_proc"); -For debugging
immediately run i_stmt;
dbms_output.put_line ('procedure completed");
END ddl_create_proc;
/
After the test is finished, you can comment out the line marked "for debugging.
You need an EXCEPTION section. If there is an error, the error message will be displayed by default; you don't need to explicitly show.
What is the big picture here? What is this procedure intended to do? There may already be a procedure provided by Oracle that the fact, perhaps in dbms_metadata:
-
Hi, earlier I had a doubt using the function or procedure function or procedure? Thanks to all who helped. but I found a way to use task2e with procedure. I would like to insert the issue.
Cumulative 2nd task spends point procedure
You create a stored procedure called spRollupExpenseItem. This procedure updates
the corresponding line in the BudgetItem table given a report of expenses and the expense category number
number. The procedure contains three input parameters, the value of ERNo, the value of ECNO.
and the amount of cumulative, as well as a single parameter of Boolean result.
This is the logic of the procedure.
· If the corresponding ExpenseReport line (ERStatus) status is DENIED or
MEANWHILE, an application error is triggered. The output parameter is set to False.
· Otherwise, the corresponding BudgetItem line is updated. The actual amount (BIActual) in the
line corresponding BudgetItem are incremented by the input of the cumulative amount parameter.
o the output parameter is set to True after running the update
operation.
good task2e can be used using procedure by housing 'OUT' in parameters.here is the code
CREATE OR REPLACE PROCEDURE spRollupExpenseIetm
(P_ERNO IN FULL, P_ECNO ENTIRE, WHOLE ROLLUP_AMOUNT, BOOLEAN P_OUTPUT) IS
ERSTATUS_ERROR EXCEPTION;
V_ERSTATUS EXPENSEREPORT. TYPE % ERSTATUS;
BEGIN
SELECT ERSTATUS FROM V_ERSTATUS
OF EXPENSEREPORT
WHERE ERNO = P_ERNO;
IF (V_ERSTATUS = 'PENDING' OR 'DENIED' = V_ERSTATUS) THEN
P_OUTPUT: = FALSE;
RAISE ERSTATUS_ERROR;
ON THE OTHER
UPDATE BUDGETITEM
SET BIACTUAL = BIACTUAL + ROLLUP_AMOUNT
WHERE ECNO = P_ECNO;
P_OUTPUT: = TRUE;
END IF;
EXCEPTION
WHEN ERSTATUS_ERROR THEN
RAISE_APPLICATION_ERROR (-20564, ' ERROR: ERSTATUS is either pending or DENIED ');
END spRollupExpenseIetm;
his compiled without errors. My next question is
2f task create Rollup fees trigger
You create a trigger called TR_RollupExpAmt. This trigger fires after the power to the
approved expenses amount (ExpApprAmt) or the deletion of a row in the table ExpenseItem. The
following points explain the logic of this trigger:
· If updating the ExpApprAmt column, the cumulative amount should be the difference
of the New.ExpApprAmt under the Old.ExpApprAmt.
· If the deletion of a row of the table of ExpenseItem, the cumulative amount should be the
the Old.ExpApprAmt negative.
· To run the update rollup, you must call the spRollupExpenseItem procedure
described in the 2nd special.
· If the output of the spRollupExpenseItem procedure parameter is true, insert a line
in the table (Log_Table) exception log.
o the ExcText (message explaining the error) value should indicate the
operation (update or delete) and the cumulative amount.
o If the output of the spRollupExpenseItem procedure parameter is false,
do nothing.
to do this I found on the internet http://it.toolbox.com/blogs/oracle-guide/learn-plsql-procedures-and-functions-13030 where he explained in the example he adds the output in the "my_first_proc" procedure parameter
p_an_out_parameter DATE
Then, he calls this procedure like this
() my_first_proc
p_name = > v_employee,
p_an_in_out_parameter = > v_number,
p_an_out_parameter = > T_DATE);
IAM so intend to do the same by task2f task2e call and check the P_OUTPUT value. If iam wrong please let me know.
and iam confused with task2f is
If updating the ExpApprAmt column, the cumulative amount should be the difference
of the New.ExpApprAmt under the Old.ExpApprAmt.
· If the deletion of a row of the table of ExpenseItem, the cumulative amount should be the
the Old.ExpApprAmt negative.
How do I know if it is updated or deleted?
I hace an idea but don't know if its valid or does not check EXPAMT to null as
if(:New.) EXPAMT = NULL)
........
can I do that. I know confectioners question sorry to make u read the whole story.Hello
Whenever you write code, you should lower lines to see the where to begin blocks BEGIN and end, what are multiline statements and things like that.
Whenever you post the text on this site, type these 7 characters:{code}
(small letters only, inside curly braces) before and after sections of formatted text.
After exactly what is causing the error message. The line of the error message numbers are too high; have you not after a few empty lines?Section causing errors seems to be:
... IF (UPDATING) THEN UPDATE EXPENSEITEM SET EXPAPPRAMT = :NEW.EXPAPPRAMT - :OLD.EXPAPPRAMT -- No semicolon here WHERE ECNO = :NEW.ECNO; spRollupExpenseIetm(V_ERNO, V_ECO, ROLLUP_AMOUNT, P_POUTPUT); IF(V_OUTPUT = TRUE) THEN insert into log_table (excno, exctrigger, exctable, exckeyvalue, excdate, exctext) values (LOG_SEQ.NEXTVAL, 'TR_ROLLUPEXPAMT', 'EXPENSEITEM', V_ECNO, v_timestamp, 'ERROR WHILE UPDATING, ROLLUP AMOUNT = ' || ROLLUP_AMOUNT -- Is this what you want? ); END IF; END IF;
You had a semicolon in the middle of the UPDATE statement.
I see no 14 lines obvoius error later. The first error risk fi END does not correctly interpret.I also changed the end of the INSERT statement.
Don't forget to put a colon in the record names: NEWS and: OLD.
Published by: Frank Kulash, 28 January 2010 06:42
-
Hello
I use Acrobat DC and want to upgrade it to Acrobat XI. What is the procedure so that I can use the same serial for Acrobat XI key. Waiting for your response. Thank you
You can not. You need a key to series made for XI. These are no longer sold.
-
I have a two procedures p1 and p2 as follows
create or replace procedure p1 ({color: #ff6600} {color} i_test1 in varchar2, i_test2 in varchar2,)
the sys_refcursor o_result1, o_err out varchar2) as
Start
Open the o_result1 for
{color: #ff0000}-select statement uses the variables i_test1 and i_test2
exception {color}
while others then
o_err: = sqlerrm;
end p1;
Let me say that the output of p1 is 100
create or replace procedure p2 ({color: #ff6600} {color} i_test1 in varchar2, i_test3 in varchar2, o_result2 on sys_refcursor o_err out varchar2) as
Start
Open the o_result2 for
{color: #ff0000} select statement uses the variables i_test1 and i_test3 {color}
exception
while others then
o_err: = sqlerrm;
end p2;
Let me say that the p2 output is 200 300
{color: #ff0000} the procedure uses the common variable ' i_test1 and select both the statemts are different but they use common variable i_test1 '.
{color}
now my question is possible for the club results of p1 and p2 that is, if I run the exit procedure one should be 100,200,300
Published by: user4587979 on January 29, 2009 03:33When you say they use common parameters, do you mean that you pass the same data for these two procedures? in a procedure the returned cursor has one record with a single column of a particular data type and the value of this unique line/column is 100 and that in the other proceedings, the cursor returned has 2 folders with a single column of a particular data type that matches the data type of the column returned by the first procedure , and the values are 200 and 300?
If so, what is the problem with just the Union queries both for example:
create or replace procedure p1_union_p2(i_test1 in varchar2 , i_test2 in varchar2 , o_result1 out sys_refcursor , o_err out varchar2) as begin open o_result1 for --Query from p1 select statement uses variables i_test1 and i_test2 union [all] --Query from p2 select statement uses variables i_test1 and i_test3; exception when others then o_err :=sqlerrm; end p1_union_p2;
-
Hi all
I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display. Any help would be really appreciated! TY
The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.
Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .
1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?
Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.
For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.
-
Original title: the procedure entry point SMapLS_IP_EBP_12 could not be found in KERNEL32.dll dynamic link library.
The procedure entry point SMapLS_IP_EBP_12 be found in KERNEL32.dll dynamic link library.
It of the message, can someone help me?
Hi BigAl3000,
Please note that Command & Conquer: Red Alert 3 is the only version compatible with Windows 7.
Red Alert 2 and red alert are not compatible with Windows 7.
See Windows 7 compatibility for Command & Conquer: Red Alert for more information.
To troubleshoot program compatibility issues in Windows 7, try the following methods:
Method 1: Open the program compatibility problems
Most programs written for Windows Vista are also running Windows 7, but some older programs might run poorly or not at all. If an older program does not work, use the program compatibility issues to simulate the behavior of earlier versions of Windows.
Method 2: Contact the program vendor or the hardware manufacturer
Contact the program vendor for advice on how to solve the problem. In general, the software vendor's Web site provides a support section that you can use, for example, to search for an error message that you receive from the program.
Hope this information helps.
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
ORIGINAL TITLE: How can I fix this please?
I have an older version of Windows XP (Home edition) Version 5.1. Trying to get updated with service packs, etc., I get the pop up message in the box below. How can I fix the problem?
'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.
Thank you for your help.
The other post:
We get an error "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" so he was trying to use internet explore.
In Firefox, I have automatic updates verified, but for some reason any I do not receive them. I need all the service packs for Microsoft.
When I try to use Internet Explorer to connect to the internet, I get a message that says "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" How can I fix? I get a lot of error messages related to the KERNEL32.dll dynamic link library.
In addition, for some unknown reason, I lost my software of Microsoft - Word, Excel, etc. I don't have the disc to recharge.
Thanks for any help. This kind of thing is frustrating and I really appreciate the availability of Microsoft Answers for assistance.
Additional post:
Im trying to update my computer with SP2 and Windows 7. Even when I try to use I Tunes and do other things that I receive and message entry point (they vary).
Here are a couple:
1. the procedure for DecodePointer entry point could not be located in the line of the dynamic library KERNEL32.dll.2. the procedure entry point SHRRegGetValueW be found in the library of dynamic links SHLWAPI.dll.
I have an old computer. Compaq Windows XP - Home Edition, 5.1.
A month ago I lost my Microsoft Office software. Word and excel... it was all gone. I have to reload the diskettes of origin provided with this computer which is about 7 years old.
Is this thing? I CAN go on the internet and move OK, but I can't download updates, or I Tunes or much else.
* Original title: do not get the automatic updates.
http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
Tom Ferguson
-
Sorry for the ridiculously long title, but that is exactly the error I get. When I contacted my friends @ Skype that they just told me it's associated windows problem. I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...
Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.
Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question. It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.
Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted. Again, try if you wish. When you uninstall Skype, you will not lose your contacts.
Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung. You have this installed on your system? If so (or even if not), go to C:\Windows\system32 and rename avrt.dll. You can call it avrt.dlX or something else you like. Reset. Let us know if that fixes the problem. If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).
-
The procedure entry Point ? getOpenState@sound@FMOD @ QAG?
Hi JishanLakhani,
Thanks for the reply.
Method 1:
I suggest you to uninstall and reinstall the game and check if it helps.See the link.
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895Method 2:
If the problem persists, I suggest you to download and install the latest file to install game on the manufacturer's Web site and check if it helps.If the problem persists, I suggest you to contact the game support for assistance.
Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.
-
Hi, we are using the Labwindows/CVI 8.5, the BNC2090, the NIPCIe-6259. Currently, we find a way to control the analog output voltage as tension - that's our goal now, and you can help me how to communicate with the main program. "" Also, yesterday, we tried to download driver for NIDAQmx 9.0, after uploading, we were trying to "find the example" and opened it but, unfortunately, we had a pop-up message, saying that "the procedure entry point_CVI_resource_acquire could not be located in the dynamic link library cvirte.dll" can you help me how to solve this problem.see for window error the attach file. concerning
Hi Emmanuel,.
have you seen this link http://digital.ni.com/public.nsf/allkb/1DB3814D6F552100862570EB00777C1D?OpenDocument
Maybe you are looking for
-
Fonts in Windows 10 sequence editor
Hi all I hope that it is a question with a simple answer. I search nothing doesn't. I just upgraded to Windows 7 to 10 Windows on my development PC. I TestStand 2014 and TestStand 2010 SP1 to support existing applications, and both exhibit this behav
-
How can we force to use for locale-specific formatting of data?
Hi all I use the Date/Time Format string to format the current date to a formatted string, I'm precise %b to show the short month, but this parameter is dependent on the local host. What is a way to force the format on a local data instead of using t
-
How will I know if my XP Home edition (SP3) is a 32-bit version or 64-bit?
I asked this question before you download and click on 32-bit, but am curious to know if the 64 is correct.
-
Premiere Pro CC 2015 guard freezing [Mac 10.11.1]
Hello worldPremiere Pro CC 2015 guard freezing and does not not on my work computer. I've been away for 10 days and they had a Freelancer come to change while I was away and now it does ' t just seems to work as well, or not at all.I uninstalled and
-
vMotion between hosts 4 ESXi and ESXi 5
I have a group of ESXi 4.x hosts connected to a vCenter Server 4.1. I have an another 5.1 vCenter Server Management 5.1 hosts. I want to move my hosts ESXi 4.1 in my 5.1 vCenter Server and upgrade to 5.1.Since vCenter 5.1 can manage ESXi 4.x and 5.