HELP the top of my video is cut off!

Similar Questions

• How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

  How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

  How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

  =================================
  Media Player Classic should read the .3gp files...

  Media PLayer Classic
  http://download.CNET.com/Media-Player-Classic/3000-2139_4-10518778.html

  For conversion... the following freeware can be helpful to try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your video clips on the
  main screen...

  Select "At?" / OK...
  (the? is the format of your choice)

  Click on... Beginning... in the toolbar...

  That should do it... John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My page is printed too high. When you print the report of diagnosis of iMac, top of page letters are cut off the page

  I have a hp c310a all-in-one.  When you print cd labels, graphics look good on preview before printing, but when it comes to the printer off, the graphics are about 1/4 "too high, which leaves the low" 1/4 of my blank cd label.  I printed a report of quality Diagnostic print from my mac and it came out too high.  Cut the top of the report, it began printing until the paper is correctly positioned.  When you print the Diagnostic Report of quality printing directly from the touchsmart on my printer screen, the report will print very well.  I wonder if there is a setting miss me when I go on my printout.

  Hello

  This really sounds like a parameter of the wrong paper on the computer, type or wrong size setting can cause these issues, especiallly it seems to work perfectly when printing directly from the camera.

• the Task Manager does not correctly load the upper and lower parts are cut off.

  the Task Manager loads at the top and bottom bars cut if you can't go to prosses or services

  Double-click on the empty area inside the border of the Task Manager window. Boulder computer Maven
  Most Microsoft Valuable Professional

• I am a new user of Firefox and set igoogle as my home page. When I first put to the top of Firefox home page is off centered and I need to use the Refresh button so it can work correctly and see all the content. Any way around this annoying extra step?

  Contents of the left side of the page is cut off. After hitting to refresh the page centers correctly.

  Preferences not saved

  http://KB.mozillazine.org/Preferences_not_saved

  https://support.Mozilla.com/en-us/KB/preferences%20are%20not%20saved

  Check and tell if its working.

• When I print an #10 envelope, address back in the upper left corner is partially cut off.

  I had the same problem on my Office Jet L7590, which is a number of years, just to show you how long this has been a problem with HP printers.

  If anyone knows a fix for the L7590 I would of course appreciate of your.

  Just don't tell me to download the updates continued, as I did when I tried to connect the printer to a network and I then spent the next six days software get old to work again because I never could get the software update to load correctly.

  Way to go HP!  It of a shame they do big printers but suck bigtime to the software. Next printer will be anything but a HP.

  Please come back to me @wml52. I checked the specifications of the printer and it shows that the bottom margin should be at least 0.63 in.. Assuming that feed you the envelope with the flap to the right, the address of the sender would then be printed on the bottom of the envelope (if I'm viewing this right), anyway, I think changing the way feed you the envelope in and changing the power settings in the print dialog box. The top margin should be at least 0.13 inches, so if you put the envelope and change the direction of flow we are able to get the address of the sender on the envelope that you expect it to appear.

  You do not know if my thought process will be easy to follow, so if you need further explanation, please send me a screenshot of your envelope printing options. It might look like this:

  

  I look forward to hearing back from you, and like you, I am eager to see this resolved. Thank you.

• For some reason any the top of my screen is cut some as if some kind of configuration has been changed can someone help me fix, I noticed when my picture on my desk looked bigger and for some reason any.

  The image that I use as my background on my desk is larger than normal, and the icons on my desktop upstairs are partly cut, Ive tried to change the resolution, but it is configured correctly. Im not sure what to do now.

  Hello gracieyk,

  1. open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.
  2. pursuant to the resolution, move the slider to the desired resolution, then click apply

  Here is one link: http://windowshelp.microsoft.com/Windows/en-US/Help/0386b009-5f30-45c7-80c8-ff0395cc24091033.mspx which will give you some

  Tips to get your quality return to normal display. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Computer turns itself on the 0645 each morning after being cut off (hibernation).

  Hello. I read some of the other threads but found no solution. My concern is that when I disconnect and disappear for a few days as the computer turns itself on that unplugged while and eventually drain the battery.

  I have a Dell Studio with Vista Home. Any help appreciated.

  Click on start - all programs - accessories - right
  Click on command prompt and choose Run as administrator. Type
   
  schtasks/query
   
  that might be easier to analyze.
   
  --
  ..
  --
  "J32EP" wrote in message news: 2801b3de-e242-40e4-ac77-613662d 22384...
  > Thanks, I'll try that. If anyone else has experienced this, please let me
  > know.
   
   

• Will, adding a second video card to the top of my total video memory or each card is discreet?

  Very well.  I have a desktop which is a few years old, and I need to more video memory in order to run some new games smoothly.  So far, my 'helper' on my desktop HP has been useless for helping me find this basic information:

  -Info on my diet

  -I still have how many slots have opened

  Also, will adding a second card to the top of my video RAM in all, or do I have to replace the primary card?

  Thanks for any help!

  Info:

  Model name d4996t

  Microsoft Windows Vista - Home Premium Edition (x 32)

  Current vidcard NVIDIA GeForce 8800 GTS

  Motherboard Info:

  Motherboard
  -----------------------------------------------------------------------------
  
  System Board

  Chipset Intel Q35/Q33/P35/G33 SouthbridgeIntel 82801IR (ICH9R)

  
  Box spring

  Manufacturer ASUSTeK Computer Inc. productBurbank

  
  BIOS

  Name of the vendor American Megatrends Inc. Release Date 2008-12-17 the string of BIOS Version 5.21 ROM size1.00 MB

  
  Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz CPU:0

  Specification of the Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz size 64,00 k size4.00 MB

  
  Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz CPU:1

  Specification of the Intel (r) Core (TM) 2 Duo CPU E6850 @ 3.00 GHz size 64,00 k size4.00 MB

  
  

  Hello

  Review the following sugggestions:

  Sapphire Radeon $6850---135 after rebate, 128 GB / s---> probably the best price/performance ratio

  Sapphire Radeon $6870---170 after rebate, 134 Gbit / s---> 3D ATI support

  EVGA NVIDIA 560 TI DS$---240 after rebate, 134.5 Gbps

  EVGA NVIDIA $560 ---160 after rebate, 128.2 Gbps

  Corsair CX600 POWER block $---50 after rebate---> measure your current diet and make sure that it matches (5.9x3.4x5.5)

  ' HP ' how-to 'articlesshould be useful.  Read the reference document which I had quoted above.

• Interpret the film or Clip > video Options? (Deinterlacing)

  Hello, everyone!

  I'm new to the Forum, but I used the first on a level amateur a few times. I apologize if this has been addressed before, and I was able to find various methods of deinterlacing, but I was wondering what are the real technical difference (if any) between the two.

  On a clip, you can 'Right click' goto edit and then interpret and under the order of the fields, you can select "conform to: any frame (Progressive Scan)"

  OR

  You can highlight a clip, go to the top menus from the top, select "Clip > video Options > Options for fields..." From there on, always select "Deinterlace"

  To me, it seems that they would more or less the same thing, but with a different terminology, I wonder how each option actually treats the video and one that would work better. Can I use against each other, or perhaps both?

  I've looked everywhere and you can't find me to use a statement of tutorials and other tutorials to use the other. None of which explain the difference between the two.

  (if it makes a difference, I work with HD NTSC video and it is upper field first I think so I don't think I need to use reverse the dominant field)

  If anyone can help it would be greatly appreciated!

  If your movie is interlaced just drop it in an interlaced sequence.

  To export, you set the export in progressive settings.

  Deinterlace systematically in the field option options is basically used for still images (or freeze frame) in a striped environment

  Or when a clip has a speed of<>

  Reverse Domanance of field is something left by the period SD were avi were lower field.

  You can also use this when a clip has a speed of > 100% or is played reversed, but I think it is also only for SD images with lower field.

  I would use only interpreter images when I know that first interprets the wrong fields.

• How to turn off the FN - key toolbar on the top of the desktop on Satellite P200?

  I have a portable Satellite P200 that has shortcuts to function continually buttons ghosts in and out at the top of my screen. How to turn off that I never use the function buttons and it is very annoying when you try to use the toolbars

  Thank you

  Willie

  To disable the toolbar, simply go to start-> programs-> Toshiba-> Flashcards (or something similar, I only know that the application has the name of "Flashcards")
  and there is a small configuration tool for these "Flashcards".

  Just go to the folder of Toshiba and the verification of the application by the top so you can turn it off.

  See you soon

• Film shot using Windows Movie Maker in part cut off

  How is it when I discover the movie I burned onto a DVD using Windows Movie Maker, shows that half of the video? The other half of the screen/video is cut off, but during the editing process and preview, it shows all of the table. What I am doing wrong?

  No guarantee, but it might be interesting to try to publish your
  project in DV - AVI format to a folder on your hard drive and
  then import the file .avi in DVD Maker to create a DVD.

  (The following links should help explain how to record in DV - AVI)

  This image shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - profiles Publishing / qualities
  http://www.Papajohn.org/Vista-publishing.html

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

   
  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

• Can cut you the top and bottom black videos?

  Hello

  I have a project where I need to do all of my video clips of the same height.

  Some of the clips are on the big screen, and I would cut out the black upwards and downwards so that I maximize the height of the sequence.

  Is it possible in the elements, and if not, is there all the programs you can do this in?

  Thanks for your time and your help.

  Shaun

  John,

  I am pleased that you found. I use it constantly, as I often animate my titles with effects of alterations and will just copy and paste attributes at all. Even for effects that are common to several video (or Audio) Clips.

  Caution: when the planning on using it, make a video with the full range of effects, and then copy. Select all of the Clips you want to paste attributes for. If you have already added a few effects, beyond the fixed effects, you will get multiple instances of this / these effects, i.e. If you have already added for the destination Clips Color Correction, a CEW Color Correction in your Clip source, you will get probably 2 instances of Color Correction. Plan ahead, so that you don't have to go back and remove any duplicate effect.

  Good luck

  Hunt

• My video not fill to the top of the screen and let the black bars to HELP border

  I'm of video editing and for some reason any, it will not fill to the top of the screen, the first clip made but then after that the others don't. I recorded the 720 p. I don't have this problem in any of my editing software.

  <-example of my problem

  I discovered what you do you must click right and set the frame size or scale to the size of the image

• How can I remove the video from the independence of my departure to the top firefox and just get the icon of firefox?

  After updating to the latest firefox, 33 in my view, to start I initially get the firefox icon and then it immediately goes to video the independence of firefox (34 seconds). Its irritating and I can not seem to get rid of. Firefox icon shows and then is overllaid by this video. Help me get rid of it! Thank you!

  Here's how to 'fix '.
  Type of topic: config in the address bar and press ENTER. Accept the message of 'dragons' to see the Advanced preferences screen. Use the search box at the top to enter the below pref.

  You can assign an empty string to stop your Firefox to retrieve "extracts" and brandLogo changes the browser.aboutHomeSnippets.updateUrl pref. Right-click this pref and select Edit then clear the value as pref in the box that appears, and then click OK. Who will also disable "snippets" that appear under the container of the research on the default home page.

  Then you must open the folder of your profile, via help > Troubleshooting Information > profile folder > > folder view button. Then close Firefox.
  Your profile file open with Firefox closed (Firefox '3-bar' menu key > exit/Quit), wait two minutes, then remove the storage\moz-safe-about + House folder in the profile folder of Firefox to remove the brandLogo and stored in IndexedDB code snippets to make Firefox use the default brandLogo and a defined default code snippet.

  If you later change your mind about these changes, you can reset the pref browser.aboutHomeSnippets.updateUrl via the context menu and Reset allows to recover the default and start using the storage\moz-chest-fort-about + House file again.