Computer turns itself on the 0645 each morning after being cut off (hibernation).

Similar Questions

• I turn off my computer when finish work but it turns itself in the middle of the night.

  My computer seems to have a mind of itself. He wakes at night after being off for hours

  This problem is sometimes because your system is set on "Wake on LAN" which means that if a packet of information happens on your Ethernet (Internet) connection, which could bring your system to wake up and then find nothing to do.

  There is a good reason for that custom this feature in some environments, but usually not for a computing environment.

  You may have a task on demand that you have added or some third party program you have installed has added for you which could be put in place to wake up your computer when he thinks it's time to run.

  If you use the Stand By option and you have cats, they can walk on your keyboard or mouse and that might be enough to turn your system off Stand By.  If you are sure that you are really close, it would not be the problem,

  The parameters might be in your system or part of your Internet - BIOS that can be disabled if you don't need.

  You can search on the Internet with something like Google for your system and model and of wake on lan and should be able to know how to disable it for your system of brand not specified and the model.

  You can experiment and before spending the night, turn off your system in the usual way and then physically disconnect the Internet cable and see how things look the next day.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  If the system works, what do you think might have changed since the last time it did not work properly?

• My computer turn itself on automatically.

  My computer turn itself on automatically.   Does anyone know what I need to do to prevent this?

  Check power management settings in the BIOS and set it to OFF. If you have Wake On Lan (WOL) active, this set to disabled.

• Why computer turns itself back after having paused?

  This computer (HP Pavilion Slimline model # s5107c, product # NP212AA-ABA, build software 93NAv6PrA3) works on VISTA Home Premium-64.  He had a virus that required the technician back up my files and clear everything and reinstall VISTA and my files.  Since then when I put the computer in standby mode, it lights automatically come back after a few minutes.

  I can find the settings for the computer to pause after so many minutes, but can not find any setting for the computer turning on itself.

  Help please.  Computer technology was not able to help me so far.

  Found this step online. Hope this works for you.

  Go in > "Screen saver" > "Change power settings" > "Change Plan settings" > "Change Advance power settings" > "Media settings" > "When Media Sharing" > and make sure that the setting says "ALLOW the COMPUTER to SLEEP".

• The computer does not see the printer (4200 Officetjet) after downloading the driver full features

  Officetjet 4215xi, Windows 7-64.

  Try to use the original HP CD-ROM driver was unsuccessfil, message telling him did not meet the requirements.  Then, I chose to install the driver directly from Windows 7.

  After installing that shows to be successful (the impressions of the printer), I wanted to get the center of HP solutions on the computer and I downsloaded the driver, choose Officetjet 4210 (4215 wasn't a choice available).

  It seems that the installation has been done, there is an icon on the desktop but when clincking it says that the printer is not connected.

  I unplug the USB cable, restart the computer and replugged the USB at the back of the printer.  No results.

  How can I work around this problem.  Thanks in advance.

  Hello

  The HP Officejet 4615xy is no longer included with the full functionality of feature for Windows 7.

  Any driver you may have used is not intended for your printer and not detect...

  You can find the information for your printer below:

  http://support.HP.com/us-en/document/c01796879

  I'm afraid that plenty of advanced features as the HP solution Center is not available for the operating system...

  Shlomi

• HELP the top of my video is cut off!

  Every time I put a video after effects top is cut off, but the background is perfectly fine.

  See this:

  http://forums.Adobe.com/thread/1252603

  It is a problem with the WMV files introduced by a recent update from Microsoft.

• Why my computer turn itself

  I have the computer gateway 64 bit, window vista Home premium a year ago.

  Hi Ben xero.

  Check the answer above and since your question is also on Facebook, check these:

  Facebook has had a lot of problems.

  Try to add to your trusted sites in IE - Tools - Internet Options - Security - Trusted Sites.

  https://www.Facebook.com/

  http://www.Facebook.com/

  http://www.Facebook.com/login.php

  http://www.Facebook.com/Farmville

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
  installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
  other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right.
  Allowed are usually OK and "unauthorized" are not always bad. If in doubt about a program, ask
  topic here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and run.
  not all are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing
  Come in.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack
  ------------------------------------------------------

  Maybe using Compatibility Mode will help you.

  Introduction of compatibility view
  http://blogs.msdn.com/ie/archive/2008/08/27/introducing-compatibility-view.aspx

  http://www.Microsoft.com/Windows/Internet-Explorer/features/easier.aspx

  Some Web sites are not displayed correctly or work correctly in Windows Internet
  Explorer 8
  http://support.Microsoft.com/kb/956197

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my computer turns on but the monitor shows saying no signal?

  It only beeps because I know not if it did which could be my ram whitch works well don't understand why it does not work.

  I turn on my pc and you can see her on because I can hear and see the CPU fan and the other fan turns but I get on my screen no signal, I tried to get out of ram cleaning it and then put in still do not work. The computer is ever damaged or nothing is a great and had pc for a few years until now its says no signal.

  I tried my graphics motherboard both my own graphics card and still does not work. Help, please.

  Hello

  As you do not do anything on your screen at all, it seems to be a hardware problem.

  It's the order of things to monitor to the motherboard:

  Monitor > cable > Port > that is either connected to a graphics card in a slot on the motherboard or integrated graphics hardware that is part of the motherboard.

  You can try to change the monitor, cable, then graph of place for good.

  You don't say if you receive an error 'beeps' at startup, which would give an indication of what went wrong.

  "Beep" is what's supposed to happen.

  If this isn't the problem:

  If under warranty, contact the manufacturer.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• keep the computer turned on when the lid is down

  I use Skype as my phone launches like to maintain my computer to receive calls, but when I close the lid, that he died and no one can contact me. any ideas.

  Hello

  You need a customized diet plan. In dictate to you what happens when you close the lid. Follow these steps:

  1. Go to control panel, and select Power Options.
  2. When this window opens, select Create a power plan in the left menu.
  3. Follow the wizard to configure the power management.
  4. Then select from the left menu, select the options for the power button.
  5. Then select from the left menu, choose when turn off the display.
  6. Then select from the menu on the left, change when the computer sleeps.

  That should solve the problem for you. Keep me posted.

  Kind regards

  BearPup

• Why my computer continues to change the file read-only after I have untick

  I just had a Virus go through my computer and I cleaned it, then my computer shows I lost all my information, but I know that I have not because I still programs and background even though I've been there and opened a few folders to see if the files are hidden it turns out they were, but the box that says hide has not been verified , so I corrected the hidden problem but now the computer keeps the read-only check box and everytime I try to uncheck once I apply then click ok, it re check it self and I don't really know how to fix this... Please help

  Hi Cameron_513,

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: follow the steps described in the article below to restore the security settings and then check if it makes a difference.

  How to restore the security settings to a known working state?

  http://support.Microsoft.com/kb/313222

  Method 3: Run Microsoft Security scanner (MSS) to remove the infections of vestige of the computer

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Infected files can be deleted from your computer; There is a chance of data loss.

• Computer unable to detect the external hard drive after installed update

  original title: update for the usb drive problem

  2 things really:

  Should I really all these updates unhappy? My computer spends much more of his time fiddling with updated it and update that never it does nothing I want to do. (Where do you want to go today? I want to lose my afternoon watching this stupid update new thing!) I'm sick of forever updated. And...

  I keep losing my 1 TB ext HDD. My computer won't find it. I do a restore to when it was visible, and I can use it. Then miserable update starts messing around again and I lose it. It seems to me that the update is hiding my ext drive.

  Any help much appreciated

  see you soon

  Hello SidBloggs,

  Did you first disabled automatic updates by following these steps: http://windows.microsoft.com/en-US/windows-vista/Turn-automatic-updating-on-or-off

  Once they are off have you tried every day updates individually and you determine who updates is causing the problem with your hard drive?

  Maybe it's just that the update interferes with the driver that you have for your hard drive and it may need an updated driver.

• computer will restart during the call on Skype after putting in the new sound card

  I have Windows XP.  I had a squeal into my microphone.  I put a new sound card on of Sarbent.  Now I have his real good, but when I try to call someone on Skype the computer will restart.

  Hi BobPrkn,

  Follow these methods.

  Method 1: Uninstall and reinstall the Skype app.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: Update the latest sound/chipset drivers.

  How to manage devices in Windows XP

• the Task Manager does not correctly load the upper and lower parts are cut off.

  the Task Manager loads at the top and bottom bars cut if you can't go to prosses or services

  Double-click on the empty area inside the border of the Task Manager window. Boulder computer Maven
  Most Microsoft Valuable Professional

• When I print an #10 envelope, address back in the upper left corner is partially cut off.

  I had the same problem on my Office Jet L7590, which is a number of years, just to show you how long this has been a problem with HP printers.

  If anyone knows a fix for the L7590 I would of course appreciate of your.

  Just don't tell me to download the updates continued, as I did when I tried to connect the printer to a network and I then spent the next six days software get old to work again because I never could get the software update to load correctly.

  Way to go HP!  It of a shame they do big printers but suck bigtime to the software. Next printer will be anything but a HP.

  Please come back to me @wml52. I checked the specifications of the printer and it shows that the bottom margin should be at least 0.63 in.. Assuming that feed you the envelope with the flap to the right, the address of the sender would then be printed on the bottom of the envelope (if I'm viewing this right), anyway, I think changing the way feed you the envelope in and changing the power settings in the print dialog box. The top margin should be at least 0.13 inches, so if you put the envelope and change the direction of flow we are able to get the address of the sender on the envelope that you expect it to appear.

  You do not know if my thought process will be easy to follow, so if you need further explanation, please send me a screenshot of your envelope printing options. It might look like this:

  

  I look forward to hearing back from you, and like you, I am eager to see this resolved. Thank you.

• Can not change the text because of letters being cut into several pieces.

  I use Adobe Illustrator CS5.1 in Windows 7. I'm trying to enter-set a file and some lines of text are not editable on a regular basis. When you select a letter, it is cut in a bunch of small images, making it impossible to change the font. The customer wants the title on their business card for United Nations in bold, and I'm unable to change the title. How can I release the return type of an editable form?

  Thank you

  Sin.

  I do not know what type of objects you have in your file, but you can give it a shot with the color of the background on the text object. Keep in mind even if it can work for you is not the way type is designed for a thinner font. So, the quality of the design may not be up to a professional level.