Help to configure the router Cisco 1941
Help!
I just bought a router cisco 1941, I understand, it came with the Cisco CP, but I don't know how get you to the part where I can use it.
Also, how can I connect to the router directly without using the HyperTerminal console, all I want to be able to do is configure the address IP of the ISP and my IP address so I can use it for surfing the internet.
Help, please.
Hello
Thanks for the screenshots and show the output! You will need a few lines of command for CCP to work:
Configure the terminal
username username privilege 15 secret PASSWORD
IP http server
local IP authentication
Sent by Cisco Support technique iPad App
Tags: Cisco Network
Similar Questions
-
Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.
Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work. I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor
Hello
HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.
This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1
If you can't make it work, you must decide between a new card or another router.
Personally, if it's new and I could return it, I'd get a different router model. But YMMV
------------
My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Please help to configure the router for internet connection 871W!
Hello world!
I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.
I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:
ISP IP: 76.114.54.255
SUBNET: 255.255.248.0
GATEWAY: 76.114.48.1
DHCP: 69.252.97.4
DNS: 75.75.75.75
75.75.76.76
If you can, please help! Thank you!
Hi david,
Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation
you could ask your ISP to perform a reset/clear MAC add and try again?
also, kindly post lastest "show run".
Edit: just to see you've updated your screenshot. could you add command under 4
Mac-add 0001.4af9.8b83
-
Help to activate SSL VPN router Cisco 1941
Hello.
I have a router Cisco 1941 and want to activate my SSL VPN license on it. How can I go about it?
Best regards Tommy Svensson
Hi Tommy,.
Please try and download the PDF of the same link.
I hope this helps.
Kind regards
Anisha
P.S.: Please mark this message as answered if you feel that your request is answered. Note the useful messages.
-
HOWTO configure SSL VPN router Cisco 1941?
Hello.
How to configure SSL VPN on a router Cisco 1941? I would like a howto guide that is step by step. I've found myself so far.
Best regards Tommy Svensson
Here are a few links that might help:
http://www.Cisco.com/en/us/products/ps6657/prod_configuration_examples_list.html
http://security-blog.netcraftsmen.NET/2009/02/Cisco-IOS-SSL-VPN-example.html
-
Router Cisco 1941 - crypto isakmp policy command missing - IPSEC VPN
Hi all
I was looking around and I can't find the command 'crypto isakmp policy' on this router Cisco 1941. I wanted to just a regular Lan IPSEC to surprise and Lan installation tunnel, the command isn't here. Have I not IOS bad? I thought that a picture of K9 would do the trick.
Any suggestions are appreciated
That's what I get:
Router (config) #crypto?
CA Certification Authority
main activities key long-term
public key PKI componentsSEE THE WORM
Cisco IOS software, software C1900 (C1900-UNIVERSALK9-M), Version 15.0 (1) M2, VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Updated Thursday, March 10, 10 22:27 by prod_rel_teamROM: System Bootstrap, Version 15.0 M6 (1r), RELEASE SOFTWARE (fc1)
The availability of router is 52 minutes
System returned to ROM by reload at 02:43:40 UTC Thursday, April 21, 2011
System image file is "flash0:c1900 - universalk9-mz.» Spa. 150 - 1.M2.bin.
Last reload type: normal charging
Reload last reason: reload commandThis product contains cryptographic features...
Cisco CISCO1941/K9 (revision 1.0) with 487424K / 36864K bytes of memory.
Card processor ID FTX142281F4
2 gigabit Ethernet interfaces
2 interfaces Serial (sync/async)
Configuration of DRAM is 64 bits wide with disabled parity.
255K bytes of non-volatile configuration memory.
254464K bytes of system CompactFlash ATA 0 (read/write)License info:
License IDU:
-------------------------------------------------
Device SN # PID
-------------------------------------------------
* 0 FTX142281F4 CISCO1941/K9Technology for the Module package license information: "c1900".
----------------------------------------------------------------
Technology-technology-package technology
Course Type next reboot
-----------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
security, none none none
given none none noneConfiguration register is 0 x 2102
You need get the license of security feature to configure the IPSec VPN.
Currently, you have 'none' for the security feature:
----------------------------------------------------------------
Technology-technology-package technology
Course Type next reboot
-----------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
security, none none none
given none none noneHere is the information about the licenses on router 1900 series:
-
How to configure the router Linksys DD - WRT for WVC54GCA E4200
I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.
I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:
http://tzodns.com/support/tutorials/188
http://tzodns.com/support/tutorials/190
Hi Majekho,
Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).
In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at: -
PPPOE configuration in router cisco 881w
Can someone help me configure the PPPOE interface FE on the mentioned router?
Kind regards
Jawhar.
What are you using the chap or pap of ISP? You're you here you will need to authenticate on their line of credentials
You have a public IP fixed or dynamic off them?
-
Configure the router linksys on windows vista
Recently I bought a linksys wireless router and have problems when configuring it on windows vista home.
I have read many articles that while configuration that I need to connect the DSL modem (DSL in my case) to the router (WAN port) and also a thread more (that came with the router) to the laptop. If I connect my laptop with router then how is the wireless network or if it is required to do the installation?
Do I need a PC/laptop always connected with wireless router and then only I can take advantage of being wireless (I hope not)? When can I disconnect the cable between the router and the laptop and use internet as well?The reason for asking this question, is that my laptop LAN port is not functional. If I use any other laptop for the initial setup and then use my laptop to connect to the router if it works without using b & w computer laptop and router connection?
I'm really a beginner for this please help.
Thank you
Hi, thanks for your answers.
I had a temporary cell phone to set up my wireless router. The question I m is that I can access internet from my lan from the dsl model cable but I can't access the internet when I connect the LAN to my wireless router and a join cable wireless router to my laptop.
While the configuration of the wireless router from the cd that I got with router reached the last step to find the internet connection and then pop up msg this router is not able to find the internet connection. What should I do?
I just saw a thread (http://forums.linksysbycisco.com/linksys/board/message?board.id=Wireless_Routers&thread.id=58742&view=by_date_ascending&page=2) and cloned my mac but coldnt able address to make it work.
I'll post my ipconfig details in a moment.
C:\Users\Chakrapani V>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : ChakrapaniV Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller Physical Address. . . . . . . . . : 00-21-9B-F1-26-C4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::71d3:2386:391a:3d9a%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 22 October 2009 07:24:15 Lease Expires . . . . . . . . . . : 23 October 2009 07:24:15 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 6: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : isatap.{314241DB-C984-4A60-A127-7D9246A8A709} Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 7: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 02-00-54-55-4E-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 17: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : isatap.{A1DE9DAE-229D-4929-A91E-F208BB0DCA22} Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes
-
How to reset the password of the router cisco 1841
Hello
HAVA router cisco 1841 forgotten username and password and it had to rely on its setting default help pls
I tried boot while now ctrl and break enter rommon1 >
rommon1 > confreg 0 * 2142
rommon1 > reset
still shows rommon 3 >
pls help, he asks user name and password and don't remember them both
THX
J
You must start the router after that.
Type the rommon starting if you have set the boot variable correctly
-
IP SLA WORKS IS NOT ON THE ROUTER CISCO 1905
Hello
I use a 1905 series cisco router in my office, I have two links in this router.
The problem is that I am not able to configure IP SLAs at this router.
Here's the model and this router IOS image.
Model - CISCO1905/K9
IOS: c1900-universalk9-mz. Spa. 151 - 4.M4.bin
its display under option only.
srbi_shillong (config) #ip als?
authentication MD5 use Keychain for IP SLA control Messages
answering machine activate IP SLAS respondercan someone tell me what IOS will support IP sla in this router?
Thanks in advance...
Good evening
You need the DATA license installed on the router. Basic IP license only provides IP SLAS responder feature that you see.
-
client ipSec VPN and NAT on the router Cisco = FAIL
I have a Cisco 3825 router that I have set up for a Cisco VPN ipSec client. The same router is NAT.
ipSec logs, but can not reach the internal network unless NAT is disabled on the inside interface. But I need both at the same time.
Suggestions?
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group myclient
key password!
DNS 1.1.1.1
Domain name
pool myVPN
ACL 111
!
!
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
market arriere-route
!
!
list of card crypto clientmap client VPN - AAA authentication
card crypto clientmap AAA - VPN isakmp authorization list
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!interface Loopback0
IP 10.88.0.1 255.255.255.0
!
interface GigabitEthernet0/0
/ / DESC it's external interfaceIP 192.168.168.5 255.255.255.0
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
media type rj45
clientmap card crypto
!
interface GigabitEthernet0/1/ / DESC it comes from inside interface
10.0.1.10 IP address 255.255.255.0
IP nat inside<=================ipSec client="" connects,="" but="" cannot="" reach="" interior="" network="" unless="" this="" is="">=================ipSec>
IP virtual-reassembly
the route cache same-interface IP
automatic duplex
automatic speed
media type rj45!
IP local pool myVPN 10.88.0.2 10.88.0.10
p route 0.0.0.0 0.0.0.0 192.168.168.1
IP route 10.0.0.0 255.255.0.0 10.0.1.4
!IP nat inside source list 1 interface GigabitEthernet0/0 overload
!
access-list 1 permit 10.0.0.0 0.0.255.255
access-list 111 allow ip 10.0.0.0 0.0.255.255 10.88.0.0 0.0.0.255
access-list 111 allow ip 10.88.0.0 0.0.0.255 10.0.0.0 0.0.255.255Hello
I think that you need to configure the ACL default PAT so there first statemts 'decline' for traffic that is NOT supposed to be coordinated between the local network and VPN pool
For example, to do this kind of configuration, ACL and NAT
Note access-list 100 NAT0 customer VPN
access-list 100 deny ip 10.0.1.0 0.0.0.255 10.88.0.0 0.0.0.255
Note access-list 100 default PAT for Internet traffic
access-list 100 permit ip 10.0.1.0 0.0.0.255 ay
overload of IP nat inside source list 100 interface GigabitEthernet0/0
EDIT: seem to actually you could have more than 10 networks behind the routerThen you could modify the ACL on this
Note access-list 100 NAT0 customer VPN
access-list 100 deny ip 10.0.1.0 0.0.255.255 10.88.0.0 0.0.0.255
Note access-list 100 default PAT for Internet traffic
access-list 100 permit ip 10.0.1.0 0.0.255.255 ay
Don't forget to mark the answers correct/replys and/or useful answers to rate
-Jouni
-
Hello
I have a service online Internet with 5 public IP addresses.
The router and the AP are connected to a switch.
I would like to set up a WRT54G Router with a public IP address and use DHCP (with private ip address) for the computers that will connect to the AP.
That the AP is connected to the switch, it is possible that the other wired computers that are connected to the same switch can get an IP from the DHCP?
Thanks in advance
In this case, the routing is automatic.
WRT54G configuration:
WAN:
Internet connection: static IP address
IP address: 180.X. X 170
Subnet mask: 255.255.255.248
Gateway: 180.x.x.x (Ex: 180.x.x.1)
DNS: servers your ISP DNS
LAN:
The IP address of the router: 10.10.10.1
DHCP range: 10.10.10.100 of-online 10.10.10.200
-
Need help to identify the router having an offer bundled security or not?
Dear all,
I would like to know the procedure to identify that the router having an offer bundled security or not? Please see the details of the router by below.
Router model: Cisco 2801
Router software: C2801-IPBASE-M
Router IOS image: c2801-ipbase - mz.124 - 1 b .bin
Appreciate your response.
No, there is no safety device on this device. You need the Image of 'Advanced security functions' for use as a Firewall and VPN functionality. File names are 'c2801-advsecurityk9...' »
If you just need SSH, there is also a picture of IPBase with the crypto. File names are 'c2801-ipbasek9...' »
-
RV 120W problem (cannot configure the router)
Hello
I just installed a new RV 120W to replace my dlink router.
The problem is that I can't view site configuration (192.168.1.1)
My internet works fine and when I go to 192.168.1.1 I can log in (with the password I set using the installation disc) but then I see the top of the site config (blue) but where the Control Panel must be I see "site cannot be displayed."
I tried to use my laptop and pc on ports diffirent.
I ve tried using IE9 and Chrome version 16,0,912,63
I ve also tried to reset the router, but this has no effect.
Can you please specify? Thank you very much!
Kind regards
Jesse
Have you tried https://192.168.1.1/
?
(https or http).
Maybe you are looking for
-
HP mouse Mini Wireless manufacturer p: can't find manual or software for mouse wireless
Want to give a kid from neighborhood this wireless mouse but cannot operate. Mouse lights up, but receiver RF USB stopped firing once I upgraded its Pavilion dv6 Win7 professional Win7 Home. Green light on the receiver is not strikes on my desk Win
-
Problem causing advertising banner message composition
Only expose the subject, ads banner will just pop out and it stops my typing. You know when type you very quickly you don't look at the screen but the keyboard itself and this banner pops out and stop your strike. I need to click on the message box t
-
Satellite L300-1f8 - need Vista drivers
Please I need all the drivers PC laptop Toshiba L300-1f8 I tried several times but I managed.
-
Satellite A200 - 19K: double keyboard lights up and the mouse no longer works
Hello I just brought a notebook a200 19 k and the double keyboard lights up and the mouse no longer works.I can't find why it does this in the manual and what is the purpose of light with symbols on it. The symbols have a purpose. Thank you very much
-
I need to connect 2 monitors.
It's a hp pavilion monitors h8-1214 and hp. The guy at best buy sold me a plug which connects HDMI on one end and needs of one of the other cards plugged in but I don't know which. I need a good explanation because I have no idea of the difference in