Please help to configure the router for internet connection 871W!
Hello world!
I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.
I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:
ISP IP: 76.114.54.255
SUBNET: 255.255.248.0
GATEWAY: 76.114.48.1
DHCP: 69.252.97.4
DNS: 75.75.75.75
75.75.76.76
If you can, please help! Thank you!
Hi david,
Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation
you could ask your ISP to perform a reset/clear MAC add and try again?
also, kindly post lastest "show run".
Edit: just to see you've updated your screenshot. could you add command under 4
Mac-add 0001.4af9.8b83
Tags: Cisco Network
Similar Questions
-
Help to configure the router Cisco 1941
Help!
I just bought a router cisco 1941, I understand, it came with the Cisco CP, but I don't know how get you to the part where I can use it.
Also, how can I connect to the router directly without using the HyperTerminal console, all I want to be able to do is configure the address IP of the ISP and my IP address so I can use it for surfing the internet.
Help, please.
Hello
Thanks for the screenshots and show the output! You will need a few lines of command for CCP to work:
Configure the terminal
username username privilege 15 secret PASSWORD
IP http server
local IP authentication
Sent by Cisco Support technique iPad App
-
Please help me find the solution for the query
Hi Experts,
Please help build a sql query. Thank you
Examples of data
-------------------
create the table Material_tb
(
Detail varchar2 (20).
Description varchar2 (200)
)
/
Start
Insert into material_tb values('Color','Red,Blue,Black,Green,White');
Insert into material_tb values ('Material','Gold, Silver, Platinum');
end;
/
Select * from material_tb;
DETAIL DESCRIPTION
-------------------- ------------------------------
Color red, blue, black, green, white
Material gold, silver, Platinum
I want that output voltage
DETAIL DESCRIPTION
-------------------- ------------------------------
Red color
Blue color
Black color
Green color
White color
Material gold
Silver material
Platinum material
You can try under sql
select distinct detail,regexp_substr(description,'[^,]+',1,LEVEL) from material_tb connect by regexp_substr(description,'[^,]+',1,LEVEL) is not null order by 1
-
Please help to get the driver for TSSTcoprp CD/DVGW TS-L632C DVDwriter
Hello
I have lenovo 3000 n100 laptop and I Evelyne need of the driver for the dvd burner
"TSSTcoprp CD/DVGW TS-L632C DVDwriter" I can't find on the site of lenovo.
Moderator Note: Published to protect the privacy of the user
Thanks in advance.
Remove the UpperFilters and LoweFilters by following the instructions in this guide. Let us know if it helps.
-
Please help me solve the css for font colors in this menu!
I finally understood how to make my drop-down menu work, but I need help, troubleshooting of this code. I have fiddled with the code for several hours and were still able to remedy. My problem is that I could not distinguish between top level links and links of the menu drop down. I want links to drop-a light cream color. However, they are shown as the same color as the color of the hover.
Here is the Web page loaded online: www.theriveroverlook.com/Trial.html
If you hover over "Locations", you will see the question. The green color of hovered links is also displayed in the lower level menu. This makes them unable to read easily and presented a problem.
Here is the css code it is necessary:
{body
Width: 1170px;
height: 1300px;
background - image: URL (BackgroundImage.jpg);
background-repeat: repeat no.;
padding-left: 0px;
padding-right: 0px;
padding-top: 0px;
}
/ * MENU DROPDOWN HORIZONTAL BEGIN * /.
{#navcontainer}
margin-left: 0px;
padding-left: 0px;
margin-top: 200px;
background - image: URL (MenuBarFINAL.png);
background-repeat: no-repeat;
height: 192px;
Width: 1170;
}
{of NAV
do-size: 22px;
Police: 'Sunday, goudy bookletter 1911;
Police-weight: 500;
text-align: left;
padding-top: 65px;
margin-left: 0px;
padding-left: 0px;
}
NAV ul ul {}
display: none;
}
Li: hover nav ul > ul {}
display: block;
}
NAV ul {}
margin-left: 0px;
padding: 0px 0;
list-style: none;
display: inline-table;
}
/ * Top level nav spacing, list * /.
NAV ul li {}
float: left;
margin-left: 0px;
}
Has NAV ul li: hover {color: #060 ;}}
NAV ul li: active a {color: #300 ;}}
NAV ul li: visited a {color: #900 ;}}
/ * display of high-level text * /.
NAV ul li a {}
Display: inline;
text-decoration: none;
color: #55390e;
}
UL.accomdrop a {}
color: #fbf1cc;
}
{#accomdrop}
background - image: URL (dropdownpng.png);
top of the margin: 13px;
Width: 155px;
padding-bottom: 69px;
background-repeat: repeat no.;
}
NAV ul ul li {}
do-size: 18px;
Police-weight: 100;
float: none;
color: #e4ddc8;
}
{#home}
margin left: 75px;
}
{#accom}
left margin: 35px;.
Width: 120 px;
padding-right: 25px;
}
{#holston}
padding-top: 10px;
padding-bottom: 10px;
padding-left: 17px;
Word-wrap: normal;
text-align: center;
Width: 120px;
}
{#tennessee}
padding-top: 10px;
padding-bottom: 15px;
padding-left: 17px;
skin: normal;
text-align: center;
Width: 120px;
}
#french {}
padding-top: 8px;
padding-bottom: 10px;
padding-left: 17px;
Word-wrap: normal;
text-align: center;
Width: 120px;
}
{#amenities}
margin left: 15px;
Width: 110px;
}
{#packages}
margin left: 285px;
Width: 120px;
}
{#packdrop}
background - image: URL (dropdownpng2.png);
left margin:-35px;
top of the margin: 13px;
Width: 155px;
padding-bottom: 80px;
background-repeat: repeat no.;
}
{#romance}
padding-top: 5px;
padding-bottom: 8px;
padding-left: 2px;
Word-wrap: normal;
text-align: center;
Width: 150px;
}
{#golf}
padding-top: 15px;
padding-bottom: 12px;
padding-left: 2px;
Word-wrap: normal;
text-align: center;
Width: 150px;
}
#photo {}
padding-top: 5px;
padding-bottom: 13px;
padding-left: 2px;
Word-wrap: normal;
text-align: center;
Width: 150px;
}
#cook {padding-top: 7px;}
padding-bottom: 10px;
padding-left: 2px;
Word-wrap: normal;
text-align: center;
Width: 150px;
}
#fish {padding-top: 10px;}
padding-bottom: 10px;
padding-left: 2px;
Word-wrap: normal;
text-align: center;
Width: 150px;
}
{#directions}
left margin: 20px;
}
I really appreciate any help you can give me! Sometimes, you look at something as long as you can not see the obvious problem before you!
Jaime
See if this helps:
http://ALT-Web.com/demos/CSS-multi-colored-drop-menu.shtml
Nancy O.
-
Configure the router for wifi mutiple connections
I have a laptop connected to my wifi router which States (private network) and I want connect an extra, but my new laptop cannot see my network
Hi glynjohn,
· Which antivirus program is installed on the computer?
Method 1: Check to see if the following is useful.
How to set up a wireless network (WLAN) in your home
Method 2: This article should provide you with the help you need.
How to troubleshoot wireless network connections in Windows XP Service Pack 2
-
Impossible to reset the IP for internet connection
Message when I try to use the ipconfig/release command line, it is that "no operation can be performed on wireless network while it has its media disconnected." What does that mean?
This means that until it connects, it cannot run this command. What you want to do is to put something out there is not (IP).
You should not have communicated. or renew. If Yes, there is either a configuration problem on your computer, or your ISP fouling
-
Please help me solve the error message
Connect the phone to a computer running iTunes 12.3.3 or later, with a cable and try check update
-
Helps to configure the pix firewall 507e for e-mail access
Dear experts,
I called our provider cisco and ask for technical help regarding our current problem as we know on our set-up.
She told me to convey my concern to the Cisco TAC. My friends told me to post it here under discussion Netpro.
I am writing today to ask a few questions about my pix 506 firewall configuration.
To give the implementation Details pls find below and attached seizures of the show tech command.
We have subscribed the service DSL and Singtel give us 2 addresses valid public IP that is 203.125.100.246 255.255.255.252.
I used 203.125.100.246 for my external interface of my firewall pix and singtel assign 203.125.100.245 to the DSL router. In this case, we will only use PAT for internet connection.
Currently he works very well our Mail Server is resided in the Singtel Office having the ip address of 165.21.111.22. Not work that we can receive and deliver electronic mail on the internet, and we can also surf the internet.
Now we intend to put our mail in our own network server, because sometimes we encounter slowness on receiving and sending emails. Pls check on the IP address below
Our LAN IP address is 192.168.1.X 255.255.255.0
default gateway, which is the IP address of the firewall pix inside interface is 192.168.1.1
The new mail server IP address is 192.168.1.4.
Here's what I've done so far.
I created a static mapping for my mail server is here
public static 203.125.100.246 (inside, outside) 192.168.1.4 mask subnet 255.255.255.255 0 0
and modify the access list to allow smtp on our networks.
192.168.2.0 ip access list ACL_OUT permit 255.255.255.0 any
ACL_OUT list access permit icmp any host 203.125.100.246
ACL_OUT list access permit tcp any host 203.125.100.246 eq smtp
ACL_OUT list access permit tcp any host 203.125.100.246 eq pop3
ACL_OUT list access permit udp any host 203.125.100.246 EQ field
Access-group ACL_OUT in interface outside
After doing it... I have loss all the internet connection, the email does not work... so I deleted immediately. because it causes network failure.
I have rather edit it and create a static map like this.
public static 203.125.100.246 (exterior, Interior) 192.168.1.4 mask subnet 255.255.255.255 0 0
and modify the access list to allow smtp on our networks.
192.168.2.0 ip access list ACL_OUT permit 255.255.255.0 any
ACL_OUT list access permit icmp any host 203.125.100.246
ACL_OUT list access permit tcp any host 203.125.100.246 eq smtp
ACL_OUT list access permit tcp any host 203.125.100.246 eq pop3
ACL_OUT list access permit udp any host 203.125.100.246 EQ field
Access-group ACL_OUT in interface outside
Saw what it did not cause a failure of network or interruption. I thought that it will already work with the config, I keep it and this is the current config now... But when I change the POP and SMTP settings so that it points on 192.168.1.4 which is the new mail server on our LAN. his does not work.
To this day, we are in a discussion with my boss or not possible to create a static mapping on our new mail server address 192.168.1.4 to 203.125.100.246 which is already assigned as external IP address and is used for PAT.
We are asking your help to know how to set up our internal mail server statically match our public IP address that is already used for PAT.
Please check attached the tech release see the.
Thank you very much!
I'd appreciate your quick response.
Your truth.
Dennis Pelea
Dennis,
Can you please send to me your configuration full pix (unscrew sensitive information) to [email protected] / * /
I am puzzled, why this configuration does not for you. I have several clients who use a public ip address for external intf more than several other services that use this single ip address.
Thank you / Jay
-
How to configure the router Linksys DD - WRT for WVC54GCA E4200
I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.
I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:
http://tzodns.com/support/tutorials/188
http://tzodns.com/support/tutorials/190
Hi Majekho,
Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).
In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at: -
Hello
I have a service online Internet with 5 public IP addresses.
The router and the AP are connected to a switch.
I would like to set up a WRT54G Router with a public IP address and use DHCP (with private ip address) for the computers that will connect to the AP.
That the AP is connected to the switch, it is possible that the other wired computers that are connected to the same switch can get an IP from the DHCP?
Thanks in advance
In this case, the routing is automatic.
WRT54G configuration:
WAN:
Internet connection: static IP address
IP address: 180.X. X 170
Subnet mask: 255.255.255.248
Gateway: 180.x.x.x (Ex: 180.x.x.1)
DNS: servers your ISP DNS
LAN:
The IP address of the router: 10.10.10.1
DHCP range: 10.10.10.100 of-online 10.10.10.200
-
Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.
Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work. I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor
Hello
HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.
This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1
If you can't make it work, you must decide between a new card or another router.
Personally, if it's new and I could return it, I'd get a different router model. But YMMV
------------
My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
HP4645: HP 4645 - change the router for Humax and now always invalid password
Hello HP / person
Please help me, I change my ADSL internet fiber and provider gave me a router Humax. However, when I tried coonect Assistant wireless via HP4645, it always show me "invalid password" this wireless I use 5 to 6 devices so I'm very sure that the password is correct.
I tried putting the Cd and it ran however it n SSID inavailable
Please help me before I change the internet from ADSL to internet fiber with new router it works just perfect.
Hi @c13pan,
Welcome to the Forums of HP Support!
I see that you are unable to get your HP Deskjet Ink Advantage 4645 e-all-in-one printer connected to the new router. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
I understand that this can be frustrating, we should be able to get this to work for you. Looks like the printer must hang on the old settings or trying to connect to the wrong network.
To correct this problem, try the following steps:
Restore the default settings network settings.
1. press on the wireless button to access the menu of the status of wireless.
2. press the button next to settings to access the settings menu wireless.
3. select restore default settings.
4 confirm the selection to restore the default values.
- Before you reconfigure the wireless, make sure that the SSID is not hidden.
- If you have a dual band router, rename the network 5.0 GHz and the name of the network is unique.
- Make sure your computer is on the 2.4 GHz network when you try to reconfigure the wireless.
To confirm you are on the same network and the password is correct, please use the printing and scanning doctor.
HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning. Download and run printing HP and doctor Scan quickly and automatically multitask resolution of known issues for this problem. When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities. -
someone please help me restore the photos deleted from my camera sony cybershot
someone please help me restore the photos deleted from my camera sony cybershot downloading on computer. Are there any hidden folder in drive g as basket in pc from where deleted photos can be restored
N ° when the photos are removed from the Flash of the camera, they are gone.
If you have not done something since then with the camera, you can download the software on your computer that may be able to recover deleted photos, or you can send the somewhere flash memory card that can do it for you.
-
Deleted his bus from Add/Remove programs by mistake please help me get the sound on my computer. I had downloaded new software I wanted to delete and that which the sound bus (I think that's what it was called was another program added with this software, it is a blue icon) I feel stupid, but really would like help getting the sound back on my computer. I have Windows XP Professional. Thank you.
Hi Rhonda327,
Check if an error code is listed in the Device Manager:
a. Click Start, click Run and then type devmgmt.msc
b. expand sound, video and game controllers
c. double-click the sub element
1. run the system restore. Restore the system to the date when it was working fine. You can check the link for the steps below: how to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084
2. you can also run the patch from the link below: diagnose and automatically repair audio playback problems:http://support.microsoft.com/mats/no_sound/en-us
Check out the links that gives you information about the installation of drivers from the manufacturer's Web site and also not to know the manufacturer or the supplier of the device below.
Link:
How to update a sound card driver in Windows Vista and Windows XP:http://support.microsoft.com/kb/166774
Add the above suggestions, you can alos use windows update to install the drivers for the device. Link, please refer to:http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsxp.mspx
With regard to:
Samhrutha G S - Microsoft technical support.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Downloaded Firefox 8 and it will link is no longer on the internet, is there a solution?
That's all. Downloaded 8 and it will not connect.
-
Windows Storage Server 2008 R2 - cannot open the dashboard
I get the following error message when you try to connect to my server via the dashboard: The exception unknown software exception (0xe0434352) occurred in the application at location 0xfd75b3dd. I could not access my server for a while now trying to
-
Xperia Z3 gets hot and restarts (many)
Hello I just got back my Xperia Z3 from the service center that has replaced my screen. After that, my phone started reebot and will turn off. I used the Sony PC Companion to repair the phone twice (reset and reinstall all the software) but still hav
-
Search for content of files for a specific number of invoice
How can I search the contents of files in a folder in my documents and find a specific invoice number, for example 15504?
-
Why won't save the shortcut target locations?
I have an SSD and a normal installation of HD. I went through and changed, in my registry so that when shortcuts are created automatically, they are set to be installed on my drive D (HD). Sometimes, however, shortcuts are always on the C drive, desp