Help w / photo copy on the disk?

Similar Questions

• copy on the disk "macintosh hd" failed. an unknown error occurred (-4)

  When I try to sync my iPad air 2 to my mac pro book I get the following message:-trying to copy on the disk "macintosh hd" failed. an unknown error occurred (-4).

  Would appreciate if someone could help it.

  I have this problem too!

• help sites Web copy to the Clipboard, and then paste it on Facebook

  Hello...

  How can I copy and paste all the web pages I want to paste it into Facebook. In my Touchpad.

  When I click on the address of the Web site, at the top of the page, it, correctly, highlights the entire address, however, in the drop down menu, on the left, there is no option exemplary editing past etc.

  In addition, the only other way I found, is to try to send the link, then try to copy the link in the email send, however, that e-mail is the name of the web page text, providing a link to the page. So I can not stick to Facebook from the email.

  Am I mistaken.

  can I ask function to copy the web address to the Clipboard.

  Also is there an easy way to copy the web address on the Clipboard so you can paste facebook.

  Thank you. :-)

  Here's how:

  Press and hold on the link.  Depending on how long you hold that it can produce two results - for me, this usually points to the whole link then keyboard appears and the cursor go to the link.  Not a problem, now tap and hold your finger there until the bubble 'Select Select all stick them' opens.  Tap "select all" and the link has been copied to the Clipboard.  To where you want that it stuck and just hold your finger on the screen until the bubble even opens.  Choose 'Paste' and the link.

  From time to time, it works as it should - press and hold the link, it becomes yellow, tap again and the 'Copy' option bubble will appear.  I think that it depends on to know if the keyboard is displayed when you press the link.  Keyboard upwards and you touch & hold = "cut copy paste" dialog, keyboard facing downwards = the dialog box "select Select all paste them.

  HTH,

  WyreNut

• Message "attempt to copy to the disk failed.

  Just installed iOS 9.3 on my iPhone 6. I am logged in as administrator. When you perform a backup, I get this message:
  "Copy to disk"DATADRIVE1"failed. An unknown error occurred (-54).

  "DATADRIVE1" is my internal drive of R:\, where most of my music is stored. Backups were usually at the: \USERS folder on my drive C:\. Well want to can someone help? Thank you!

  My guess would be that iTunes is trying to transfer some content on the device in your library and failure. See how to backup your iTunes for Windows with SyncToy library if you do not already have a backup method. Back up the data from left to right: before it breaks down just in case.

  There is an outside possibility that it might be a permissions problem trigger a somewhat ambiguous error message. Try to repair the security permissions for iTunes for Windows.

  TT2

• Why can't I burn a copy of the disk already in my library? I get a message on copy rights

  I have copied several cds to my library, but had only this judgment on what I can copy. Why is this? I just had my hard drive wiped and reformted

  Thanks to the pirates. This would have something to do with my current problem. If so how can I solve this problem.

  Hello

  1. have you made changes on the computer recently?

  2. How do you try to burn to CD/DVD?

  3. What is the accurate and complete error message?

  4. you try to burn the data files or music files?

  Method 1.

  I would like to refer to this article.

  Disk for Windows 7 burning tips: http://Windows.Microsoft.com/en-us/Windows7/disc-burning-tips-for-Windows-7

  Method 2.

  If you use windows media player to burn the files, then follow this link.

  Burn a CD or DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows7/burn-a-cd-or-dvd-in-windows-media-player

  I hope this helps.

• Photos copied to the wrong place

  My Lightroom image files (pictures) are on an external drive that I back up frequently. Somehow, during the import process I copied the pictures of the day in my "My pictures" folder on my main drive by mistake. Is there a way to move these files to the right place and not lose the keyword adaptation, all other data attached to these files?

  Thank you

  Don

  The easiest way would be to go into the Lightroom library module. Drag the folders in the list of folders on the left side. Lightroom moves them for you and monitor where he put them.

  HAL

• Need help with photo Panorama of the stadium Editor

  http://i328.Photobucket.com/albums/L343/aville44/1230101807a.jpg

  Last night, I was part of the 70,000 fans to attend the Music City Bowl in Nashville TN. While I was there I took a few pictures, however, present a pic I want perfect... mainly because it is the only paranorma shot I took. I did a little editing to it in photoshop, the stuff of color/contrast/brightness auto... and enfantee smart. As you can see, some areas of the image are brighter than others, and some are sharper than others. Is there someone who can change it for me and give it a professional look good? Im not asking for anything major all my means, just to have a nice, balanced look. A concern is the lights high to create a glare type, and the field is so brilliant it seems white. If someone wants to take a shot at editing it please do not hesitate to, or, if you have ideas feel free to throw it out there. Thanks in advance!

  Jordan

  Here's another with cleaned up a little too much sky. I'm just dinking autour with it then LOL.

  

• Hard drive does not correctly identified under Win7 64 bit and the blocking of access to the disk.

  I use a Maxtor Ultra 16 L01F500 SATA, but Win7 (64 bit) is to identify it as a SCSI drive Maxtor L100P0. He not only identifies by mistake, but also blocks access. I get an error indicating that the location is not accessible. Under computer management, the drive is there and gives the correct size and format (NTFS - was previously my main drive until I upgraded to Win7) when we look under properties. Also, Windows shows the drive is healthy and active. Don't know what to do to get access again (I have admin access to the player thought that would help). I also ran the disk error checking and it showed no errors. You don't know why Win7 has misidentified or why it will not allow access. Any info or help would be appreciated. I can't seem to find the drivers for the drive, otherwise I would have tried that. Thanks for reading.

  In disk management, remove this disk partitions, and then create a new partition

• I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do.

  I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do

  Hello

  You can follow the steps below to solve the problem:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  1. click on Start, typeregedit in the Start search box and press ENTER.

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  
  3. If the key exists, go to step 7.

  4. in case the StorageDevicePolicies key does not exist, you must create a new.

  a. right click on the empty field and select new > key.

  b. name the new key as StorageDevicePolicies.

  5. turn on highlight StorageDevicePolicies, and then create a new DWORD called (32-bit) as WriteProtect.
  6. double click on WriteProtectand set its data value to 0.

  7. If the key already exists, double click on WriteProtect and change its value from 1 to 0 to allow write access.
  8. exit the registry editor.

  Check whether the problem is resolved.

• How can I remove a copy of the photos? need help

  How can I remove a copy of the photos?

  Simply delete them. The Mac App Store has apps that will search for duplicates and propose to delete them. I used Duplicate Cleaner to iPhoto and photo Duplicate Cleaner

• Can I make a physical copy of the elements of 14 photo shop?

  Yes,

  Hi all

  This is my first ever having to ask a question about the photo shop elements. I want to buy, download and install items 14. My question is. If I do I'll be able to make a physical copy of the software? The reason I ask is because in November last, I had a catastrophic computer crash and after another I could not reload my previous version I had but I contacted Adobe and a tech was kind enough to help me find the problem. So my question because I understand that when you buy and download that you can use it on two computers if necessary. I am grateful for all someone could give me advice. Just one more question. I couldn't just burn the exe file. file to download Adobe on a CD or a DVD?

  Greg

  gwest479 wrote:

  I couldn't just burn the exe file. file to download Adobe on a CD or a DVD?

  Greg

  Yes, you can download the installation files and save them on a hard drive or disk.

• I need a copy of the iDVD themes folder. Can anyone help?

  After changing my hard drive after a failure, I managed to copy all my stuff more, or so I thought. When I open iDVD, the application asks me to find the folder "themes." I don't have it. Apple no longer support iDVD so I was wondering if someone could help a copy?

  What version of iDVD you have?  You always have access to your old hard drive?  If so the folder you want to copy is named "iDVD" and will be located in one of two places:

  HD/Library/Application Support

  or

  User/Home/Library/Application Support.

  If you do not, you will need to get it by buying a copy of the diskette of iLife 09 of a 3rd party retailier as Amazon.com: ilife 09: softwareor eBay.com.  Why, because iDVD (and iWeb) has been abandoned by Apple for more than a year.

  Why iLife 09 instead of 11?

  If you buy an iLife disc in order to get the iDVD application do not forget the drive of iLife 11 provides only themes for iDVD 5-7.  Installs the software update is no longer the earlier themes to start from the disc iLIfe 11, or the accession of iDVD 7 available on the Apple Downloads site contain them.

  Currently the only sure fire get all the themes is to start with the iLife 09 disc:

  
  

  

  This shows the content of iDVD in iLife 09 via pacifist disc:

  

  You can then pass from iDVD 7.0.3 to iDVD 7.1.2 through accession to the Downloads Apple Web page.

  Export the slideshow in iPhoto under a QT sequence via the export button in the toolbar below.  Select size = medium or large.

  Open iDVD, choose a theme and slide the QT movie exported file in the iDVD window to avoid the drop areas.

  Follow this workflow to help ensure the best DVD video qualty:

  Once the project you want it save it as an image disk via the menu file → save as Disk Image . It will separate from the process of encoding of the burning process.

  To check coding mount the disk image, launch a DVD player and read it.  If it plays OK with DVD, encoding is good.

  Burn burn to disc with utility disk or toasts to the slowest speed (2 x - 4 x) in order to ensure the best quality.  Always use higher quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are recommended in these forums.

  

• Try Powershell Copy-Item, get the message "there is not enough space on the disk.

  I'm using Powershell 2.

  I'm trying to copy a file, not very complicated.

  Copy-item D:\Outgoing\tsc.sqb D:\Incoming

  I get this:

  Copy-Item: there is not enough space on the disk.
  On line: 1 char: 10
  + Copy-item<  d:\outgoing\tsc.sqb="">
  + CategoryInfo: NotSpecified: (:)) [Copy-Item], IOException)
  + FullyQualifiedErrorId: System.IO.IOException, Microsoft.PowerShell.Commands.CopyItemCommand

  If I replace Copy-Item by Move-Item, everything works fine. I didn't ' t want to move the file, however, simply copy it.

  Any ideas? Files is 230 KB or more.

  Hi BarryFreeman,

  You can ask your question in the TechNet next to all the script help forum:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• How can I stop automatic copy of the photo I deleted

  After deleting my files pictures photos, they seem to auto replicate themselves. How to sustain losses and prevents them from reproducing auto. I have windows XP with SP2.  Geoff cordially

  Unwanted copies have file names with
  copy "prefix of"?

  Example: Copy of IMG_1455.JPG

  If_yes_maybe the following tutorial, I wrote
  for XP offers a few ideas:

  Here's how to reproduce the unwanted
  copy of...

  Hold down your CTRL key and select multiple files...

  Place your pointer over the selected group
  (holding the key ctrl) and left click / drag
  the group even just the slightest bit... now
  release the mouse button.

  Ooops! More copies...

  Maybe the following will help:

  Sometimes most of the person who
  trying to select multiple by holding the CTRL
  or the SHIFT key down while clicking on the left to select the
  image files.

  Copies are created when you are unable to
  completely release the mouse button before
  you move the pointer to another file. When a group
  the selected file is dragged... even the slightest
  release the mouse button will produce a bit...
  copies of all the files previously highlighted.

  It's a little easier if you have your folder
  Options set at single click... that way you can
  select/deselect a file with just a mouse more
  and you don't have to click. For multiples you
  I have to keep... CTRL or Shift.

  Do not click on... no slip... no copy... maybe that of
  your solution. To adjust the click...
  Open a folder and go... Tools / folder
  Options / General tab... Check... 'single click '.
  To open an item"/ apply / OK.

  If you want to delete all the files in a folder
  You can try the following:

  Reach... Edition / select all... or type... CTRL / has...

  With all of the files selected... go... Drop / delete...
  or press your delete key... or... click on the
  Group and choose 'delete '.

  How do I find and remove unwanted 'copies '.
  of your image files.

  Open the folder that the images are saved in and
  on the left, click on the button 'Search' in your toolbar.

  (If you view the files from a montage
  program and do not know where the record is... right
  Click on one of the image files and the menu...
  choose... Properties. The path to the folder will be
  in the tab 'General' to 'Place').

  In the research pane select... "All files and folders".

  In the "All or part of the file name" field. Come in...

  a copy of

  Now... on the left, click on the search"" button.

  When the search is complete... go to... Edition / select all...

  Then go to... Remove / delete.

  You will see a dialog box asking if you are sure
  you want to delete the files, click Yes.

  Now... on the left, click on the 'Back' button in your toolbar.

  Now the remaining files should be your originals.

  If you delete the wrong files... recover from
  your basket now.

• XP uncontrolled copy of the photos in MY PICTURES

  When you work with images in my PHOTOS of MY XP, the system begins to produce uncontrollable hundreds of copies of the photos I'm or choosing to work with trying to remove.  For example, a file should have only 150 images but has 570, a few images have been copied to 40-50 + times.  It's like a horror movie, where one seeks to delete files and they multuply faster that I can remove them.  What happens if I update to Windows 8?  Files containing copies not controlled will continue to do so?

  When you work with images in my PHOTOS of MY XP, the system begins to produce uncontrollable hundreds of copies of the photos I'm or choosing to work with trying to remove.  For example, a file should have only 150 images but has 570, a few images have been copied to 40-50 + times.  It's like a horror movie, where one seeks to delete files and they multuply faster that I can remove them.  What happens if I update to Windows 8?  Files containing copies not controlled will continue to do so?

  ==================================================
  (Scroll to the end of this message for another way to solve the problem)

  Unwanted copies have file names with
  copy "prefix of"?

  Example: Copy of IMG_1455.JPG

  If_yes_maybe the following tutorial, I wrote
  for XP offers a few ideas:

  Here's how to reproduce the unwanted
  copy of...

  Hold down your CTRL key and select multiple files...

  Place your pointer over the selected group
  (holding the key ctrl) and left click / drag
  the group even just the slightest bit... now
  release the mouse button.

  Oooops... multiple copies...

  Maybe the following will help:

  Sometimes most of the person who
  trying to select multiple by holding the CTRL
  or the SHIFT key down while clicking on the left to select the
  image files.

  Copies are created when you are unable to
  completely release the mouse button before
  you move the pointer to another file. When a group
  the selected file is dragged... even the slightest
  release the mouse button will produce a bit...
  copies of all the files previously highlighted.

  It's a little easier if you have your folder
  Options set at single click... that way you can
  select/deselect a file with just a mouse more
  and you don't have to click. For multiples you
  I have to keep... CTRL or Shift.

  Do not click on... no slip... no copy... maybe that of
  your solution. To adjust the click...
  Open a folder and go... Tools / folder
  Options / General tab... Check... 'single click '.
  To open an item"/ apply / OK.

  If you want to delete all the files in a folder
  You can try the following:

  Reach... Edition / select all... or type... CTRL / has...

  With all of the files selected... go... Drop / delete...
  or press your delete key... or... click on the
  Group and choose 'delete '.

  How do I find and remove unwanted 'copies '.
  of your image files.

  Open the folder that the images are saved in and
  on the left, click on the button 'Search' in your toolbar.

  (If you view the files from a montage
  program and do not know where the record is... right
  Click on one of the image files and the menu...
  choose... Properties. The path to the folder will be
  in the tab 'General' to 'Place').

  In the research pane select... "All files and folders".

  In the "All or part of the file name" field. Come in...

  a copy of

  Now... on the left, click on the search"" button.

  When the search is complete... go to... Edition / select all...

  Then go to... Remove / delete.

  You will see a dialog box asking if you are sure
  you want to delete the files, click Yes.

  Now... on the left, click on the 'Back' button in your toolbar.

  Now the remaining files should be your originals.

  If you delete the wrong files... recover from
  your basket now.

  Also see the following article:

  Trouble fixing: stop Windows copy
  Files accidentally when Ctrl-click selecting
  http://www.howtogeek.com/HOWTO/Windows-Vista/fixing-annoyances-stop-Windows-from-copying-files-accidentally-when-CTRL-click-selecting/