Help! What is the problem with my file?

Similar Questions

• What is the problem with my files, they don't move, copy or delete? #@?!!

  ..... It is not as easy as you think, either! I am not a novice, but I can't understand how to solve this problem! If I try to move the copy or rename them, Windows XP said 'Impossible. Access denied. Even the disk is not full or write protected and the file is not in use."  Well NO, the hard disk is NOT write protected and far from complete.  No other files in "My Documents", or if otherwise, give me problems. In addition, the files themselves are not protected in writing! They don't have ANY special attributes (IE. 'Read only' and 'Hidden' are NOT defined). Needless to say, I did not define all attributes on them myself, they are not in a shared folder, and I am the administrator of my own computer. When I restarted the computer the next day, it changes nothing! The problem with these particular files remained!

  I was able to move, rename, or delete only with UNLOCKER. But it's not my problem. My problem is when I try to burn any program I use, burns keep in check the end and I keep losing DVD - R, one after the other! I understood the reason for the failures of engraving is because of this problem of reading / writing weird with the files!  WINDOWS XP created this write protect it somehow, because he wasn't on the original files! However, this limited access status is invisible! There is no set special attributes on these files!

  They are just media files, I downloaded, as well as text files (FIVE files different, slightly different formats, ALL from different sources!). They have been downloaded to FIVE different subfolders created in 'My Documents'. And it's not just the affected media files. It's all the files that are in the same folders (ie. txt, jpg) (even if I can at least open the jpg, while I can't read multimedia files).  I've never had this problem with any other similar files downloaded in the same folder. These files are NOT protected by copyright, OR infected by viruses, AND I do not have the virus on my system. (I stopped Kaspersky, my virus program, but it made no difference. "So there was no lock file). Yet, I can play is no longer the files (so that I could before the etc..). VLC says "cannot open the file", WMP says similar. I created a new folder in My Documents, moved to the new folder with UNLOCKER, it made no difference! Same problem! Even using UNLOCKER to transfer them to the desktop, not in any folder in itself does not change a thing! Here is another beauty: software "UnlockIT" says "the file is not locked by any conducted! I have to be to imagine...

  ... This whole thing really made me realize how Microsoft Windows helps my carpal syndrome problem...

  Hey PieterVO,

  I've seen this in a few other threads before. Although I don't have a FixIt for you, I have a few discussions to look over.
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/8e9eee80-C171-4D94-b91e-6797e1f96e49
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/d14731ec-4f0e-4ef8-9aac-028dd7104e0e
  I would like you to try to take possession of the individual files that you work with and try again. I didn't see the error codes listed above, so if you get the error codes, please report it to their.
  See Kieron June 9 Post and post Stickywulf November 14 in the second thread I listed above.
  Give those a try and let us know the results. I hope this helps. Thank you!

• Need urgent help - what is the problem with my request?

  Hello
  
  I am trying to solve a problem with my request... and we tried a lot of things. When I open the report in Word and try to build my model, I can't insert fields from a particular query. He don't develop in the browser field as my other data sets and is not listed as an option in the table Wizard.
  
  There is something weird with the support of the subquery? I have encourted some problems with column aliases (for example, the query just doesn't if you create aliases), that's why I alias in the subquery.
  
  The query runs very well in SQL Developer.
  
  I would really appreciate help with what is a customer demand very urgent
  
  Thank you
  

  SELECT b.cb_no as "CB No",
         b.ir_no as "IR No",
         b.name as "Arrestee Name",
         b.fbi_descr as "Type",
         b.statute_descr as "Description",
         b.fbi_cd as "FBI Code",
         c.day as "Arrest Date"
    FROM building_fact a,
         (
           SELECT DISTINCT
                  t3.arrest_key as arrest_key,
                  t1.cb_no as cb_no,
                  t1.ir_no as ir_no,
                  t1.name as name,
                  t2.fbi_descr as fbi_descr,
                  t2.statute_descr as statute_descr,
                  t2.fbi_cd as fbi_cd
             FROM compstat_arrests_dim t1,
                  compstat_arrest_charges_dim t2,
                  compstat_arrests_fact t3
            WHERE t1.arrest_key = t3.arrest_key
              AND t2.arrest_charge_key = t3.pri_arrest_charge_key) b,
         compstat_date_dim_v c,
         building_dim d,
         building_incdnt_type_dim e
   WHERE a.building_key = d.building_key
     AND a.incident_key = b.arrest_key
     AND a.date_key = c.date_key
     AND a.incdnt_type_key = e.incdnt_type_key
     AND e.incdnt_type_descr = 'ARREST'
     AND d.address = :p_address
     AND c.day BETWEEN TO_DATE(:p_date_from,'MM/DD/YYYY') AND TO_DATE(:p_date_to,'MM/DD/YYYY')
   ORDER BY c.day DESC

  Published by: oroborus on January 19, 2010 16:26

  I think you have to wait until u get the data and then if not juice insert dummy data and carryon your developmet and say your ETL guy to clear all data and insert when loading

  ~ Srix

• Whats is the problem with OBJ files in Photoshop CC 2014?

  "What's up my fellow adobinites! Well, I want to start with, "I have a dilemma. When I open a .obj file in Photoshop CC 2014 there is an error each time but in reaction to the results, I torrented Photoshop Cs6 for educational purposes and testing and it worked flawlessly. It was the version 'More' then Yes. Also the .obj file worked after effects CC 2014 and with the other hand I think Photoshop 3d features just in I'm wrong.

  Also if you have files obj sites teem please me. I'll love you forever.

  Photoshop is misinstalled, or you've had alteration of the disc of the Photoshop files - it is a mistake to BONE, saying that it can not load part of the binary files required to use Photoshop.

  It has nothing to do with OBJ files.

  Uninstall and reinstall Photoshop, then make sure that all of the updates are applied.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Need help to solve the problem with the margin at the bottom of the converted pdf file.

  Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?

  Hi jerrio1949,

  There is no way to change the margin, you settle back into your original file & then convert to PDF format.

  Kind regards
  Nicos

• Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities of free ware

  Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.

  Ritu

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/279242

• What is the problem with my iMac mid-2011

  Hello

  Need help find out what is the problem with my iMac to mid-2011.

  Yesterday during a reboot it just never came to life.

  On turning the power on, I get the RINGTONE to start and that's it. The screen is totally black. Nothing behind tried with a torch.

  VRAM rearmament so far I tried repeatedly, unplug and plug, all kinds of combinations of keys in the carillon and nothing.

  Connected to an external monitor and shows nothing of too - no signal.

  Any way that I can know what is wrong with it before sending it to the service tech? I suspect bad graphics card but how do you ensure?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• What is the problem with kernel_task?

  Hello everyone,

  What is the problem with kernel_task?

  I explan: Macbook Pro early 2011 LION OS up to date.

  I bought 8 GB on China supplier, CRUCIAL...

  Well, I got a lot of kernel Panic. Usually, he is involved material, taken on my RAM, back is the original, so still have in the kernel_task to 300% CPU monitoring followed up to 500%...

  Well, I went back to a clean install, a manufacturing one, with nothing.

  Wish I 'd' diagnosis of the equipment, never went on, test it on safe mode, disable all extensions, then nothing:

  Sometimes the kernel_task crazy sometimes not...

  Good read a lot on the internet but nothing has worked... I went to the Apple store in DIJON, they do not have diag any hardware problem, and all my App are approved Apple.

  Used to play the eve online thought, therefore, the graphic chipset pourrait was damaged, so when it's too 'hot' the mac gets crazy... but I expected crazy restarts and that sort of thing.

  I bought a manual, there is no french support to the opening of Apple, but found nothing about my question.

  So what?

  I bought something conivient on Support and friability so today he's dead?

  What should do?

  If you still get the panic of the core, thanks to post separate 2 or 3 of the most recent as answers on this.

  Reports of kernel panic: "/ Library/Logs/DiagnosticReports".

  http://support.Apple.com/kb/ht2546>

  http://support.Apple.com/en-us/HT200553>

  The panic report should have "panic" in the name of the file.

  Kernel panics tend to come from 2 sources

  • Material:
    • 3rd party RAM is the most common.  Replace or return the original is usually the solution.  Crucial and MacSales.com were 2 of the most reliable sellers for the initial quality and guest without question of replacement.
    • Broken USB cables or USB devices have turned up as the 2nd most likely material number.  Usually remove all USB devices, or replace the keyboard and USB mouse to see if it's one of those existing.
    • There are a few Macs with graphics chips that have failed.  I don't know that they exist, but do not know what model Mac had these chips.
  • Software
    • antivirus protection.  It is the number 1 most panicked related software cause.  More OS X does not need antivirus, because it has its own built-in protections http://www.thesafemac.com/mmg-builtin/>.
    • Other core 3rd party extensions are a distant 2nd.
    • NOTE: not all 3rd party kernel extensions are causing problems, but when there is a kernel panic, it's the first thing to look at.

  If run kernel_task is often caused by core 3rd party extensions.  It can be caused by an application program, but then the Applications-> Utilities-> Activity Monitor show "As" an application that consumes a lot of CPU, disk IO and network IO in collaboration with the kernel_task using lots of CPU.  If there is no application burns the CPU at the same time, so it is almost always a 3rd special part of the kernel that was originally the use excessive CPU kernel_task.

  Start in safe mode is usually a test to see if 3rd party extensions are part of the case.  But in safe mode is not how you run your system, because it also loads less advanced graphics drivers and other components.  Safe mode is very conservative, but it's a great way to see if the 3rd party software is at fault and have started when 3rd party software panic the system at boot.

  The contributors to the forum long strongly warn against getting 3rd party anti-virus, cleaners Mac and additions increasing.  This class of 3rd party additions have shown time and time again to really harm performance, remove things they shouldn't and cause a kernel panic.  Especially right after an OS X update to a new version.

• How I download 80070103 windows update is update safe what is the problem with this update

  Just got the update installation today to download update 80070103 time ever I go to download the update fail what is the problem with this update & how do I get updated.

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with Windows Update.

  Please answer these questions:

  1. What is the update's KB number?

  2 have you made any changes to the computer before the show?

  Let us try the following methods:

   

  Method 1: Run the following fix - it:

   

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2: See the following article:

  Windows Update 80070103 error code:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  Hope the helps of information. We know if you need help. We will be happy to help you.

• What is the problem with my Oracle reports parameter?

  Hello

  We use a PL SQL package that allows the user to select the report you want Oracle and associated parameters.   While the control is passed to Oracle 11 g reports.

  The requirement of one of the reports is to enable more detailed codes be selected by the user and then shown.  The detailed code is an alphanumeric field that can hold between 4 and 6 characters.

  If my data model looks like this

  SELECT student_id

      FROM my_view

     WHERE detail_code IN :p_detail_code;

  and the parameter that I'm passing to Oracle reports looks like this (when I view the source HTML code)

  & p_detail_code =('1001','1002')

  so no record is selected.

  However, if my data model looks like this, I get the records you want:

  SELECT student_id

    FROM my_view

  WHERE detail_code IN ('1001', '1002');

  We have Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production.

  Please tell me what is the problem with my setting.  Thanks a lot for your help.

  This isn't how you can use in. See this example on how to solve it with the digital settings. If your setting is a character, you need to change this.

  In fact, when you simply enter 1,2,3 as an input parameter, you actually create this query:

  Select *.

  from my_table

  where num_column in ("1,2,3")

  Use rather a lexical parameter:

  Select *.

  from my_table

  & p_where

  In the parameter after relaxation shape, build the lexical like this:

  :p_where := 'where num_column in ('||:p_param||')';
  

• I agree with the CC. But I also have APS CS6. I get the message that the updates are available. But whenever I try to 'install', I get the message that it failed and the error code is U44M1P7. What is the problem with obtaining this update?

  Whenever I try to install I get message that he had failed. The error code is U44M1P7. What is the problem with this update?

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager

  I read a lot of posts that the updater latetest (cloud) sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• What is the problem with this URL

  Can someone tell me what is the problem with this url

  owa_util.redirect_url(apex_util.prepare_url('f?p='||:APP_ID||':25:'||:APP_SESSION||'::'||:DEBUG||':25,28'||':P25_JOBID,P25_PG:&P3_JOBID.,3, null,||:APP_SESSION'));

  It gives me a value for P25_PG, that is to say 3 but always sets P25_JOBID to 0
  
  Gus

  Hello Gus,

  It looks like point P3_JOBID has no value for the rendering of the page.
  If the value is set subsequently, you can try the following change

  owa_util.redirect_url(apex_util.prepare_url('f?p='||:APP_ID||':25:'||:APP_SESSION||'::'||:DEBUG||':25,28'||':P25_JOBID,P25_PG:'||:P3_JOBID||',3, null,||:APP_SESSION'));
  

  But the part at the end

  ||',3, null,||:APP_SESSION'
  

  Wil do nothing because you give only 2 items in the list separated by commas of the page elements you want to submit. Everything after the second comma in the comma separated value list is of no use for the url of the apex.

  As additional info, the URL of the Apex is built like this:
  >
  1 - application ID or alias
  2 - page ID or Alias
  3 - session & SESSION. : APP_SESSION
  4. application (for example, PRINT_REPORT = REPORT_1) & ASK. : REQUEST
  5 - debug (YES or NO) & DEBUG. : DEBUG
  6 - cache framework

  APP - clear the cache for the entire application
  SESSION - clear the current user session cache
  PR - Reset pagination
  x - clear the page cache x
  -empty the cache for the element y

  7 - separated by a comma list of items on the page
  8 - the list of values separated by commas
  9 - mode printer friendly (YES or blank)

  f? p = & APP_ID.: 1010: & APP_SESSION. : & DEBUG. : RP, 1010:P1010_ITEM1, P1010_ITEM2, P1010_ITEM3:A, B, C
  >

  Kind regards
  Kees Vlek
  -----
  Company: http://www.orcado.nl
  Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
  Twitter: http://www.twitter.com/skier66
  If the answer to question please change replied and mark the appropriate post as correct / helpful.

• What is the problem with this Forum? Why Adobe taking so long to reply to messages?

  What is the problem with this Forum? Why Adobe taking so long to reply to messages?
  It is in fact 'specific' Forum of Photoshop.
  I usually come back another Adobe forum responses quickly.

  Chime.

  Hi people,

  For what it's worth, there are several of us who try, in addition to our regular work, to keep an eye on two other forums.  Quite simply, we care about the product and try to make sure that we give our customers the best experience as possible.  Plus, what better way to hear about your weak points in order to solve them.  But, as Mylenium and Christmas as well stress this, the forums are officially a user experience.  If you need help fast or official, it isn't the best place to do it.

  Regarding your question of Arab, Rahzah, I answered in two different threads and would be happy to help you with your problem.  Please choose a single thread and stick with it. two tabs is a pain.

  Thank you
  David

  PS - some of us do check the forums on our time, as I did last week at the launch while I was on vacation.

• What is the problem with Creative Cloud connection update

  What is the problem with Creative Cloud connection update?  I tried 25 times to update, but it does not work? Can you please help?

  Double-click on the creative process of cloud.  which opens another window that contains a button exit.

  or, click the process (to select) > click on view > click process to quit.  This method brings up a window that contains the two resignation and force them to leave (in the case of quit smoking does not work).