Help with cloning of my screen of my HP laptop for my AOC monitor

Similar Questions

• Problem with my cc speedgrade since I updated my laptop for windows 10

  Hi, Pleas help me!

  I had a problem with my cc speedgrade, since I updated my laptop for windows 10. whenever I want to start speedgrade there is an error warning that tells me speedgrade does not work? did anyone else have this problem or someone has an idea to fix

  Best regards

  Jan

  Post edited by: Kevin Monahan

  Reason: The title was too long

  Hello

  I just solve my problem... Directory settings user removed from SpeedGrade and now everything is fine!

  C:\USER\xxx\AppData\Roaming\Adobe\SpeedGrade\9.0\

  Christian

• Please help with replacing the W700 screen

  I'm at the end of my mind here, so I really hope that someone can help you. First of all, some background: I work for my part, repair and maintenance of computers, and I have a client with a Lenovo W700 requiring a new screen. The original had been broken.

  Seemed easy enough, so I ordered a so-called compatible more than a month. I installed it and it did not work. I sent a replacement. The replacement does not work either. I thought at this point, that a genuine part of Lenovo would be better than a "compatible" by someone else. I went on eBay and found the original part.

  It does not, almost - but the backlight does not come on. I can vaguely see what is on the screen, but that's all. I sent a replacement, but the replacement has the same question. But here's the kicker: the original BROKEN screen backlight works normally.

  What happens here? Y at - it a setting I missed, some rider, I need to clear, or is it possible there is something wrong with the machine? I need a definitive answer for my client, but here, I'm stumped.

  I can't really diagnose of 3000 miles away, but you can certainly damage the motherboard by breaking the screen. It is more likely with the screens LED backlight, but it is possible with a CCFL display like yours. There is usually 2 fuses (F7 and F8) that control the backlight. I don't have a motherboard of w700 to look at for more information. On most machines, they are on top of the room near the connection of the LCD screen. You can have one or two blown fuses. Most of the shops don't want to or cannot replace the fuses. You need good equipment. It is not a job for an iron solder 'Radio Shack'. Unfortunately, you can watch replacement motherboard, which is a big problem for this model.

• Help with Windows Vista black screen

  I have a Windows Vista SP1 64 bit with 8 GB of RAM and 2 3850's Radeon ATi CrossFireX. in any case, I have a program called mechanical system, you've all probably heard before, this is an excellent program to clean your hard disk and defragment your memory. However, I ran last night and said the program automatically restarts the computer when it ended, after that he finished and I rebooted was greeted with the atrocious Black Screen of Death with a cursor, if it is not blinking and I can move it freely, but there is nothing I can do with it given the background task bar is non-existent and the entire screen is black.

  I tried some of the solutions, I can not even the CTRL + ALT + DELETE to get into task manager and manually start explorer.exe; Help me please. The only type of response I can get from the system is to obtain the keys to stick to pop up when I hit the SHIFT key five times. I am very confused. I don't have external hard drives hooked up to it and there is no thumb-drive connected via USB either. I'm completely puzzled here. Please help me.

  Hello

  System Mechanic, by Iolo is one of the best of this type of program, he's trying to at least
  be legitimate, however it is still a Registry Cleaner and system optimizer that leaves a
  much to be desired in terms of compatibility. These programs are more likely to ask questions
  While fixing anything. Most are like snake oil. So my advice would be to uninstall. If you insist
  use make sure you have done a current Restore Point before using it and keep current backups
  on the primary drive.

  -----------------------------------------------------------------------------------------------------------------------------------------

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  ===================================================================

  Sometimes it works:

  There are backups in the folder C:\Windows\System32\Config\Regback.

  Here is an article for XP and Vista is similar in scope. The config folder and its content should
  be rebuilt.

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Check this thread - you can use the command to a startup or recovery disk prompt.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Need help with the Blue error screen.

  I'm having problems with the Blue error screen at startup which said "less than or equal Driver_IRQL_not. He entered the State of memory dump & black screen after that.  Nothing was abnormal after checking all the drivers in windows 7 Edition Device Manager Home premium. I'm really lost as to what causes it? My computer is a toshiba satellite laptop computer P840 pourrait-someone ' a please advise me on this matter. Thanks in advance for your patience.

  Dear Zigzag3143,

  I finally managed to fix the problem by the chance. I had discovered that this problem was caused by the sypnatics of the laptop touchpad driver. Uninstalled A & reinstall it with the correct driver from the laptop manufacturer websites. Did not expect that it is the cause of all the problems. Thank you for your valuable advice.

• Please help with my error blue screen error checking was: 0x0000000a

  Hello

  Periodically, I get a BSOD in my computer Windows 7 Professional. This happens all the time, but usually shortly after startup or when the computer has been idle for a while. I saw a lot of people talk about problems of memory. Maybe it's my case but I ran Windows Memory control and also MEMTEST86, and no error occurs. I hope someone can help me refine my problem it is a problem of driver or compatibility of memory itself. This has happened for some time, but since I do not use this computer that I often put off fixing.

  I mounted this computer myself:
  Card mother Gigabyte GA-MA785GM-US2H version 1.1
  AMD Phenom II X processor 3 720
  Crusial 4 GB memory DDR2 800 Balistix

  I would like to know if there is any other information system, that I can provide. Here are 3 recent mistakes that I received last week.
  20/11/12
  Description
  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000000a (0 x 0000000000000000, 0 x 0000000000000002, 0 x 0000000000000001, 0xfffff80002f13351). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 112012-24429-01.

  17/11/12
  Description
  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000001a (0xfffffa80036b85f0, 0x000000000000ffff, 0 x 0000000000041790, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 111712-21325-01.

  13/11/12
  Description
  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000001a (0xfffffa80036b85f0, 0x000000000000ffff, 0 x 0000000000041790, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 111312-16473-01.

  I also downloaded the files of 3 dump for these errors to skydrive.
  https://SkyDrive.live.com/redir?RESID=3D05BF23C2746C26! 116

  Please help me solve this problem. Thank you in advance for any help you can give. And let me know any other information I can provide.

  Peter

  Well Yes, 2 sticks remove 1 try each slot. If theres only 2 slots. See what stick breaks down in any location

  If the 1 stick is not crash after so long (depending on how long it takes to plant it now).  Remove it, put it in the other location. Do the same thing.

  If a stick plant in 2 or all slot machines, do the same for the 2nd round

• 60 HP G Series notebook PC: need help with Hp 60 G screen flickers to black then returns if repositioned screen?

  First the 8.1 update stinks.  This operating system doesn't do well with a laptop no touchscreen.  The system will not wake up after the cover is closed. I have to restart with a difficult start.  Also when I tap the screen suddenly goes black vibration and movement of the laptop itself. If I set the screen before and behind the screen back to normal. I think it's only a matter of time before this constant back and forth of movement to loosen the screen completely and more severe the wires that connect the Panel to the keyboard.  ORRRRRRRRRRRRR I'll just throw the frustration!

  Help someone!

  Katyana_89

  Your windows just install the latest graphics drivers...
  As for the screen.
  You have a defective vga cable that probably needs to be replaced

• Help with error on blue screen under Vista 32 bit

  Had this message pop up several times. Any ideas?
  Thank you!
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 1033
  More information about the problem:
  BCCode: fe
  BCP1: 00000008
  BCP2: 00000006
  BCP3: 00000001
  BCP4: 867B 9000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini122811-01.dmp
  C:\Users\xxx\AppData\Local\Temp\WER-37955-0.SysData.XML
  C:\Users\xxx\AppData\Local\Temp\WERB24D.tmp.version.txt
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
  and their forums (if any) for known issues.

  Check these KB Articles that "pourraient" apply.

  Stop 0xFE peripheral sleep or Hibernate with USB streaming output
  http://support.Microsoft.com/kb/974303

  "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
  use some USB AMD EHCI host controllers
  http://support.Microsoft.com/kb/982091

  ==================================================================

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =============================

  Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
  be a connected USB device and not a system USB device. And you can never really exclude drivers.

  BCCode: FE 0x000000FE<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

  --------------------------------------------------------------------------------------

  A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
  USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

  Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
  in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
  Special instructions. (Antivirus/antispyware/security programs)

  ----------------------

  Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
  devices.

  References to Vista also apply to Windows 7.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
  (can have zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =======================================

  After the above, attach a USB device at a time to see if any cause the issue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite 2410-303-help with replacing the LCD screen

  Hello
  My screen is dead and must be replaced. Can someone tell me where I can get a replacement and at what price? I live in Mauritius and cannot get spare here.
  Thank you mnay
  Jawa

  Hi Jawa

  In my opinion there is not a lot of options. You can order parts by authorized service partners or order it from some independent PC shop. Check if you can find a partner in your countries, or maybe someone else (they can send you everything you need to). Another way Google a little bit and I'm sure you'll find someone who can send you a new LCD screen for your laptop.

  On the price I can't tell you much because we walked free and the price is different from one country to the other.

• Help with the efficiency of the program, stop a loop for?

  Hi all

  I need some advice programming General to help my VI to operate more effectively.  I have a table in which the program runs each point and 2d compares the value for the surrounding points.  The user can select the range of cells to inspect range, so if the user selects 1, then, it will compare the point (0,0) to all cells in a single cell.  If the user selects 2, then all the cells in a range of cells 2 and so on.  If the point (0,0) is superior to everything around him, then he writes this point in a table.

  I made more notes in the VI to explain what is happening, but I think that the program would be more effective if I could stop a for loop to run as soon as it detects a false condition, i.e. the point (0,0) is not more than one of the surrounding points.  As it is right now, it compares at all points around him, writing TRUE/FALSE for a table, then checks if all conditions are TRUE.  That takes a lot of time if the user selects a value of 8, for example.  It would reduce a lot of processing time if he just threw to the next point as soon as it finds a FALSE condition.

  Any other advice would be appreciated as well.  Try to be a more effective programmer!

  Thank you!
  Alex

  I do not attach the data file, because it is too big.

  In versions before the invention of the loop For with conditional stay terminal, you can do it, but you have over what a while loop to stop when your condition is True, OR when the terminal i is equal to the size of the incoming array - 1.

• Please HELP WITH OFFICEJET PRO L7580 - HP Imaging Device Software Funstions for Windows Vista

  I have a HP Officejet Pro L7580 - connection with laptop Dell and Windows Vista PC.  I did not have printing problems, but has been unable to fax or scan.  I uninstalled the software and put back in place to make sure I had the latest software and compatibility for Vista.  I can now fax but when I try to scan, I get the following error: No analysis Options - refer to device documentation to troubleshoot issues - only, there is no documentation of the device...

  When I went to the HP site to install the latest version of the software, I've installed the full functionality & driver software... guess I thought that this would have everything that I need, but it seems that the software of HP Imaging Device functions was not installed...

  If anyone has had this problem and what should I do now?  Thanks much for any help you can offer!

  Please texasgirl try this:

  http://support.HP.com/us-en/document/c04134999

  Good luck.

• Need help with copy/move a virtual machine to Mac Pro for MacBook Pro

  Hello

  I have Fusion 7.1.1 installed on my Mac Pro (lap) and my MacBook Pro (laptop). I am copying my virtual Windows machine 8.1 of the tower to the laptop. I copied the. vmwarevm file from the tower to the laptop. When I try to import the virtual machine in Fusion on the laptop it is grayed out. I don't know why 'find Virtual Machines' does not work either.

  
  

  Thanks for any help,

  
  

  Steve

  Have you tried "Open and run" in the file menu of Fusion with the 8.1 Win as target VM?

  Note that if it works, ask if it has been copied or moved. If you Copied, renewal may be necessary because the MAC address has been changed.

• Try to download PS, I, ID CS6 macbook pro laptop for mac desktop monitor. Help!

  I have a macbook pro and I have PS, and ID CS6 but I have lost the serial number... Please help!

  Please go through: https://helpx.adobe.com/x-productkb/global/find-serial-number.html

• Need help with a WHEA_UNCORRECTABLE_ERROR

  I would like to help with this error blue screen that I started having recently (started do yesterday or the 3rd if you want) and I get when I'm gaming.

  I looked everywhere to try to solve this problem, but nothing helped and some would like to help. I checked to see if my CPU and GPU are overlock and I don't think I can be overclocked. In any case, I'll include a link to the minidumps for tech savvy people can help me with this.

  Minidumps: http://1drv.ms/1wIEzHs

  They are called BCC124 and are related to the material.  Read how to diagnose and, hopefully, to correct in this wiki

• Help with Windows XP. Your security settings do not Web sites to use ActiveX controls installed on your computer.

  Original title: help with Windows XP.

  I have a laptop with Windows XP. When I try to go on homepage e-mail he says I have no internet connection, even if I do. Also, I can't run windows update. A pop up as my security settings will not allow active x but don't give me any option to change as I've seen it before. I tried everything I can think of.

  Hi SteveKey,

  ·         You use Internet Explorer to access these sites?

  ·         If so, which version?

  Method 1: Run automated troubleshooting and check if it helps.

  Improve performance and security in Internet Explorer

  Method 2: Check to see if the following is useful.

  a. open Internet Explorer.

  b. Select tools, then Internet Options in the menu at the top of the Internet Explorer window. The Internet Options window opens.

  c. Select security from the list of tabs at the top of the Internet Options window. The Security tab appears.

  d. click on the custom level button. The security settings window opens.

  e. scroll down to download signed ActiveX controls entry and select the quick option.

  f. scroll down to Run ActiveX controls and plugins entry and select the active radio button.

  g. Select the OK button to accept the changes. You may have to restart Internet Explorer for the settings to take effect.

  Method 3: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try