Help with df1010 digital photo frame.
I was able to load some photos of the practice in the framework and it work all ok. When I tried to remove them, there was a power failure.
When the power came back I found the photos left there, but the screen says they are a format that is not supported. I tried again to remove them, but the framework just hangs up.
I tried to reset to factory setting, but that no longer works.
Is there some sort of reset?
It is fixed. Thanks for all the help everyone...
Tags: Notebooks
Similar Questions
-
Gigaframe L81 - probblem with a digital photo frame
Hello!
I think, I missconfigurated my camera... I put the automatic light (auto light) options, then the LCD is turned off. OK, its light of day here, but how can she Cook?
And - perhaps because of the thing said? -its LCD screen turns off every time, when I push the power on button. I'm tired of using the reset switch, but she has - at least, in the LCD - no effect. Device is reset, then lights up the screen, I see him starting, I can touch control "buttons" on the right side (I can see the blue lights), but after only 2-3 seconds, the LCD display turns off again. Although I can do anything on my camera - attach PC files, copy or dele (ordered from Windows) etc. I just don't see anything in the LCD screen.
What's wrong?
Hello buddy
Please do not be angry on me, but this is computer Toshiba systems support forum and this is certainly bad place for these issues. :(
I just hope that you will find a s reading manual answer user you have gotten with this digital photo frame.Good luck!
-
I use an iPhone 6 more to take pictures and when I load in my Nix, some horizontal display digital photo frame, but on the phone, they're looking at vertical. How I see why they display horizontal and how do I turn the easily? I did get a bit of work in PS but nothing is coherent. I know PS is powerful but I'm new.
I thank you,
James B...
I don't think that you can find in your phone. It's just something that detects where the phone is held, so that the display on the phone is still running correctly. I think your problem is that the image could have an auto rotation function, that tried to fill the frame.
My image happened to have a size of 800 X 480 pixel, so I use the image processor to all my images at that size. I have an action which then resize the canvas of this size also with a black background. This prevents the framework of cropping images or turning, like the example below:
-
Using an iPad as a digital photo frame 1
Hello
I framed and wall mounted my iPad 1, so I can use it as a digital picture frame. But to put it on I have to remove the wall and remove the unit from the frame.
I would also use to 'framework' other things beyond my photos. For example, showing weather forecasts. And other applications of wall mounting type "smart". To do this I would ideally be driven from an another iDevice.
From my research, however, the easy remote control options exist (I think I can jailbreak it then vpn with a Mac). My son, I was wondering if I could control it with an external device via the port of loading or even the headphone jack. Side ideas, I thought, but such solutions exist?
All ideas welcome to help in transform an old iPad 1 in a big digital camera frame.
The only thing I can think of - but never tried myself - would be to use a bluetooth keyboard. That would leave only the problem of the on/off switch.
-
Pandigital 10.4 "LCD PI1002DW Digital Photo Frame
I have a Pandigital PI1003DW 10.4 digital picture frame. When I plug in a USB port using a mini USB
cord, my computer does not find the drive. The unit displays connected to the computer. I want to use this
to transfer pictures computer to the device. Any help?Hello
1. what operating system do you use?
2 did you change on your computer?
3. did you receive an error message?
I suggest you to check in the manual that came with the device to find out how to connect the unit to the computer images and transfer to the device.
I suggest you follow the link and check.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
-
How to view windows live movie on my HP df820b4 digital photo frame
I have created a slideshow movie about 1.4 GB using Windows Live Movie Maker. Save the movie, I even copied on a 4 GB SD card and inserted into the slot on the photo frame. He said there's nothing on the disc, however, my computer says otherwise. I then ran the slide show through my software "Digital Media Converter more" as an mpeg4 file. This was not recognized by the framework. I'd be happy if someone can provide the necessary appropriate file extension or, if not the problem, what should I do to allow the slide show (film) to appear on the frame.
Thanks for your help. It seems now that it is HP support to address the problem...
-
I have df1010v1 10 '' digital picture frame and I get no prompt to load the pictures either from a USB stick or an SD card?
The device does not seem able to recognize the existence of a mini SD card or a USB key.
Do I need an upgrade of the software, and where is he?
Solved. After reading the forum, I reformatted my SD card and my USB drive in FAT32. Then copied the same images for two external memory devices and the df1010 now recognizes both and I get the prompt to load photos.
-
Help with opening a photo program help links
Install a program called INTELLI_STUDIO for my photos
Almost all of my photos have become small 90 s "s X 60".
I went to the program help index and sought to help with that.
My pointer cannot open files that I need to
What should I do to fix this? TY
Hi Daniel,.
- Are you referring to Samsung Intelli-studio?
- Why you have this program installed? What exactly do you want to perform?
If you are referring to Samsung Intelli-studio please contact Samsung because it their software and there will be a better person to help you with this problem.
Please report if you need assistance on issues related to Windows.
-
How can I reduce photos strained on digital photo frame
some of my images are fine and normal, others are distorted by the stretching of how I overcame stretching
See the manual for the photo frame to the size of the supported.
You will then use a photo editor to resize some of your photos.
-
UNRESOLVED: df800b2 8 '' Digital Photo Frame firmware issues
Do not think that someone other than HP can help about this, because it requires updated firmware update for the frame!
Third time to post is a charm - last one I clicked the button "Resolved?" and it enabled "Accepted Solution" and now I can't cancel that and suspect that previous thread is ignored.
-------------
I have the image of df800b2 and the photos are not displayed in sequential order (they jump around a bit in sequential mode).
used file names...
001_MG_2755.jpg
002_MG_2756.jpg
003_MG_2757.jpg
004_MG_2758.jpg
... etc...
By any measure, these are sequential file names!
I understand that there is a firmware update available, according to the comments on other forums. Can HP please post the updated firmware for this forum or PM it me at least? There are many bugs in the firmware originally supplied with the chassis and I think HP should blithely seek to make their customers happy with the purchase of HP products! This firmware update should be available.
My framework model is "df800b2-16". I can provide S/N on request email from HP, if that's what it takes.
----------------
As an experiment, I even changed all the names of the file 001.jpg, 002.jpg, 003.jpg... etc.
He still jumps around (jump 2-3 images back anyway - not 100% sure how, but clearly to jump some photos) and about runs in the REVERSE order. (Top number first!)
This is clearly what is expected in a "sequential" display of images!
------------------
Next experiment was to 10 images with the name of the file (number) on each image... 001.exe jpg by 010 jpg file names.
Value sequential mode, 5 seconds interval, no transition, read CF card, I get the following "sequence":
5,4,6,3,7,2,8,1,9,10, 5,4,6,3,7,2,8,1,9,10... (repeat this pattern - sequential sentence!)
I tried to rename it to 1_001.jpg through 1_010.jpg with the same results!
---------
HP - please send/post fixed firmware!
A command prompt ANY reply appreciated!
OK - finally got this addressed.
See: http://h30434.www3.hp.com/psg/board/message?board.id=Other1&message.id=514#M514
-
DF820 Digital Photo Frame slideshow works too slowly
Hi all
I have a frame of DF820 loaded with about 100 JPEGs on a SanDisk Ultra II SD 2 GB card map. The size of the picture varies, but most are less than 500 KB.
The slideshow will run no faster than about 25 sec/pic. We see the response time even if I use the next or previous buttons. I have truied to switching between various options, such as Original or Optimal, but nothing seems to affect it.
For what it's worth, when I turn it on, it takes about 15 seconds to start the hourglass, and another 25 for the first image to load.
Can someone tell me what could be the problem?
Kind regards
The f
Me again,
Never mind. I changed the photos I put about 50 KB, and they load very well. I'm always surprised how slow, it loads a file, but I guess that's by design.
-Jeff
-
transfer pictures on a sd card to play in a digital photo frame
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
FWIW... It is always better if you include your question in the body of your message.
Insert the SD card into your Media Player and go... Start / computer.
The drive should be recognized as one or more removable disks and
each will have a drive letter.Example:
Removable disk (e :))
Removable drive (g)
Removable disk (h :))Left-click each removable disk until you reveal the directory root of the SD.
Card.OK, now that you know the letter of player if you click right one selected
Group of photos or an entire folder, you should be able to choose... Send to /.
Removable disk (? :))..) .This must copy the photos on the SD card.Make sure that the photos in a folder because the number of photos you can copy
the root directory will be very limited.Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Help with uploading my photos to phone 2 computer!
I bought a microSD 2 GB Scandisk 4 the phone and I can't find anywhere on my computer when I hang it. Sum one please help me! I tried 2 follow the instructions in the book, but when I click on my computer I can't find the removable disk icon. What's wrong? I'm doing something wrong? Help, please! I have a lot of photos I want 2 load my phone on 2 my computer part 2 with the family. Thank you
Kengie22
If the photos transferred correctly in the crush, now, they should be about 2GB microSD memory card that you have correctly installed in the crush, not permanent internal phone memory.
No USB cable yet to connect.
Check with this menu path:
- Settings > memory > card memory > Pictures, y at - it something in this directory?
- If so, you are ready to connect the USB cable to the computer and transfer the pictures from the memory card from the phone to the computer.
- You can copy and paste or use the mouse to drag and drop in the directory you want the photos in.
See page 47 of the steps 1-5 manual overwrite for further advice...
(Motorola Crush manual entitled "about your computer" section)
-
Tao Electronics 80001 brushed metal Keychain Digital Photo Frame
No software, how do I put in place, for the photos.
Hello
Follow the steps below and update us with the results.
Download the software from the following link and check.
https://www.taoelectronics.com/downloads.html
For more information, see the link:
http://www.taoelectronics.com/FAQ.html
If you encounter problems, please contact the Support of Tao to get help.
http://www.taoelectronics.com/tech_support.html
Let us know if it helps!
-
Newbie needs help with old concert photos
I'm just getting started with PS > was my main reason for getting the program to edit hundreds of photos together, I took in the 1970s on 35 mm film and was developed by post in enterprises (don't forget Clark, anyone?) Most of the pictures are ugly, but they have great sentimental value and it's time for me to try to resurrect them. Like most beginners, I find PS overwhelming but want to dive in. Can someone give me some guidance on the necessary basic to begin steps to improve these photos, which are among the worst of them, because in addition to poor exposure, developers cut the negative through the image, and then recorded back together and printed the photo I scanned recently. I need some basic first steps to improve the overall image and then get rid of the line. I want to do it myself, I'm not asking anyone to do it for me. Any help would be appreciated. Thank you very much.
Just for fun, I spent a few minutes. Yes, I did:
1 levels. To make things dark concert. I cut the bottom of range.
2 auto-ton, Auto color, auto contrast
3 painted a quick mask fuzzy brush on the Cup
4 use content-aware fill. (for the record, it is really sloppy and could do much better).
5 adjusted levels once again, but adjusted the darker Middle slider. To taste.
6 saved.
Maybe you are looking for
-
a VPN client is necessary?
Is a customer VPN as necessary Incognito on MacBook? I've recently updated Sierra
-
How to create two different smart albums with photos with the same date?
I created a smart album by using 'Date is' and ' keyword is EAA.» (The photos have a keyword like "EAA" or "Flower". Photos of keyword EAA & flower have the same date.) When I use "Corresponding to all" are has no pictures in the album. When I us
-
Hello! I have problems with my LabVIEW after upgrade my Mac to Yosemite. Has anyone got it to work and you had to do something to make it work? Specifically, the freezer program when I try to choose the VISA resources to my program which has worked f
-
I just bought a 2540 Deskjet All in one printer and it won't print any documents. I installed the software from the disk and updated via the web as well. The laptop (vista) sees the printer and the hp software can see the printer but when I try to pr
-
I tried to use the "Search" function to locate a specific file. The computer froze... not allow me to cancel when I realized that it wasn't working. The only way I could get the closing of the window had to shut down the computer.