Help with forms of morphing

Can someone help me?
I'm trying to turn a triangle made in illustrator. I converted to a form and applied the procedure indicated on the video (link below). I created keyframes for triangle and circle roads, copied the keyframe of the circle and stuck on the chronology of the triangle. However, instead of morphing instead, as it is, triangle moves to a point diferent in morphing. How can I make him stay where he was?

Video link: T001 forms Morphing in after effects CC (intermediate) - YouTube

Then I saw that tutorial and I hate to say this, but is not very good and it is not teach you effective techniques or even appropriate to do what needs to be done to run the morphs. His terminology is also not consistent with the actual AE terminology. He stumbles finally in a solution, but the technique is not something you want in your bag o ' tricks.

Here are some things that you should consider trying to animate paths. Firstly, each closed path has a first Summit. Second, if you animate the position of the vertices that the points will move in a straight line since the first Summit in the first Summit and continue on the path so the direction that you drew the path and the position of the first Summit in the form of the first and the second form must make sense. We will take changing a square or a circle in a triangle. The square and the circle have 4 points. The triangle has 3. To make things in sweetness of the square or a circle, triangle, you need to add an extra point to the triangle. The first Summit is the cotyledon. Here's the circle is drawn by using the Ellipse tool:

Here is the triangle:

Note that the first Summit of the two is up to the center of the shape. Now, here's the place:

The first Summit is at the top right.

If you try to convert a triangle then the upper right corner of the square will move to the point of the triangle of the square the lower right corner will move upwards, the bottom left will move to the right to match the lower right of the triangle, and the upper left corner will move downwards resulting in a very strange distortion in the transition.

If you set the lower left corner of the place as the first vertex, then you would get a different type of movement:

A smoother transition that looked more normal can be obtained by setting the addition of a new point to the path square in the center of the first line and giving that first vertex:

Then add a few points on the sides of the triangle (line deleted so you can see the points better):

Then, you would get a transition that looked like now at half way through.

If the first Summit of the place was not reset in the middle of the top line, then you get this mess and wonder what's happened:

The triangle is moving because you do not have your peaks aligned properly because the tutorial teaches you what you need to know. Beware of tutorials and try and so you don't go in blind alleys to sift through the authors.

Tags: After Effects

Similar Questions

Help with forms and checkboxes

I am a new user of Muse. I want to create a form that has three columns; product, price and a checkbox. The visitor would click on a box for the product they want. When the user confirms the transaction so I want the content of the form transferred to another page for further processing. This new step could send an email from the form, launch of a PayPal transaction, etc. I don't have a database connected to my site, so the output will probably be an email with the form data. I could really use some help.

The default forms do not support covering, since there is no way to store persistent information via cookies, sessions, or script data. you would need a BC Pro account or use another service. Otherwise, we really need to be a separate page for each item.

Mylenium

Help with Forms Menus!
Hi friends,

I wanted to insert record into a table at the click of a button in a menu in Oracle Forms 10 g. I used a code something like this
```
procedure sample_proc(d_id number,d_name varchar2,mid number,lid number) is
begin
insert into departments values (d_id,d_name,mid,lid);
end sample_proc;
```
and I used this code in the button
```
sample_proc(:departments.department_id,:departments.department_name,:departments.location_id,:departments.manager_id);
```
but I had a 'Bad Bind Variable' error.

How can I solve this problem. Thanks in advance.

Kind regards
Maury
Hi, Manoj-

A menu is another module and therefore has no access to the elements of forms at compile time. You cannot directly reference the elements on the form in the menu code. You must make indirect reference with the built-ins NAME_IN and COPY.

So in your code replace references such as: departments.department_id with NAME_IN ('departments.department_id'). If you assign values, use the code as COPY(999,'departments.department_id').

Hope this helps,
PAM

help with forms

I'm quite new to Dreamewaver CS4 and I'm currently working my way through the book by Jeffery Bardzell "training from the source. I got to Lesson 5 'crossing of data between pages. I created the fields first name and last name on the form, and then run the form via the server. I works very well and will display the first and last names on the form processor IE "thank you, john smith, to complete my form" the book then tells me to open the form processor and it should look to "thank you for my application, but it displays:
Thank you, notice: Undefined index: firstName in c:\xampp\htdocs\newland\test_form_processor.php on line 9.
lastName undefined index in c:\xampp\htdocs\newland\test_form_processor.php on line 9
for my application.
Could someone tell me what I did wrong. I followed the book Word for Word and I also checked the code on my page with the code on the lesson of "completed" on the CD. theyr'e the same two.
Any help would be apreciated

Thank you much for the help. Both methods work very well.

Paul

Need help with Forms 10g documentation!
Hi friends,

I need documentation of forms 10g can someone give me the link I downloaded contains only the pdf installation files and documentation for reports, but I'm looking our for Forms 10 g any help would be appreciated.

Kind regards
Maury
Maury,
The simple fact of the matter is that Oracle no longer publishes a full set of documentation of the product (for example; User Manual, etc.) Everything is now in the forms help system. The last time Oracle published the kind of documentation you are looking for has been with Oracle Developer 2000 (Forms 4.5). You can still get the pdf version of these books in the Oracle Forms Developer and Forms Server Documentation. Download them quickly because they may be there much longer! It seems that Oracle is slowly remove ALL content that is more than 4-5 years old.

Hope this helps,
Craig B-)

If someone useful or appropriate, please mark accordingly.

Help with form - cc

Hi all, this is probably stuff really Basic for all, so bear you with me, I have the code below in the context of a submit button that I use for various forms without any problems, but what I want to do is to add a unique 'cc' to the code address, so that form, I am currently working on past at this address as well as the drop-down list... can anyone help?
Thank you very much
If (DropDownList1.rawValue! = null) {}
RealEmail.event__click.submit.target = ' mailto: ' + DropDownList1.rawValue + '? Subject ="+ Subject.rawValue;
App.Alert (RealEmail.event__click. Submit.Target);
RealEmail.execEvent ("click");
} else {}
App.Alert ("Please select a user from the drop-down list!");
}

I have sent the form updated in a separate email.

Let me know if this helps.

Thank you

Srini

Help with forms of formatting with CSS

I am moving from tables to CSS, and I'm having a problem formatting with a search box form that is to stay on the same line with text links. I works very well with this website to www.volcanicacoffee.com. The question is in the horizontal red bar in the upper part you can see at this link to test http://www.volcanicacoffee.com/testing/SEO3col-absolute-7.htm . The file is associated.
I spent several hours trying different location codes, but the form of guard falling below the text links search box. The CSS code is anchored in the header. The red horizontal bar is an AP Div that I want to keep for SEO purposes.
Thanks in advance for your help.
Buck

The IE conditional comment has nothing to do with borders ;-) They are the rules to keep IE line, for example: for the sidebars to be sitting in the correct position, the other to ensure that the background color in the side bars goes down.

Anyway, I cleaned up the css a little boxes for you and it works for me in IE and FFox.

As you can see I wrote a shortcut css for the padding and margin in this way selectors, you don't consider specify border-top, border-bottom, etc., it is all written on a single line.

{#box}
background-color: #F5F5F5;
Width: 180px;
border: 1px solid #BBBBBB;
do-size: 10px;
make-weight: bold;
line-height: 180%;
text-align: center;
padding: 5px;
margin: 0 5px 5px 0;

}
{#box2}
background-color: #F5F5F5;
Width: 180px;
border: 1px solid #BBBBBB;
do-size: 10px;
make-weight: bold;
text-align: center;
line-height: 150%;
margin: 0 5px 5px 0;
padding: 5px;
}

Help with form design/performance.

Greetings, I design a form in LiveCycle field and it does not work as I expected. I don't have this problem when you create a form on page one; This form is two pages (maybe that's part of the problem).
There are two problems I have with this form, and I'm unable to understand the necessary correction. I have attached the PDF file of the reference form.
#1 problem: When the expansion areas are filled with several lines, a blank page is inserted on page 1 and the rest of the form is moved down to pages 2 and 3.
#2 problem: When the expansion areas are filled with several lines, fields at the bottom of page 1 "fall" at the edge of the form instead of flowing to the top of page 2. I tried checking and unchecking the "allow to jump to page" box for the subform and or change the result.
Any help on these questions would be greatly appreciated!
Thank you!
AH

You have created a further subform under each page. It's is not at all necessary.

Bookmark flowed and remove the upper part of the subforms level in the two pages...

I modified your page and attached.

Pls check and let me know it is what you expected...

Nith

Need help with forms, plsql

Hi, am new to oracle and do a project on the same
I have the following code and would like to store the variable 'wid' for my next step but unfortunately I get an error > bad connection variable. How can I go about it? Any help will be much appreciated
Code > >
DECLARE
U_ID VOTERS. TYPE % V_ID;
MOVE VOTERS. PASSWORD % TYPE;
CURSOR LOGIN_CUR IS
SELECT V_ID, PASSWORD OF VOTERS;
BEGIN
SELECT W_ID IN: WID OF VOTERS WHERE V_ID =: V_ID;
BEGIN
LOGIN_CUR OPEN;
LOOP
EXTRACT THE LOGIN_CUR IN U_ID, PASS;
IF: V_ID = U_ID AND: PASSWORD = PASS THEN
OPEN_FORM ("... ») ;
OUTPUT LOGIN_CUR % FOUND;
END IF;
END LOOP;
CLOSE LOGIN_CUR;
END;
END;

Hello

By declaring the global variable, you can pass values between Forms.

For example

-to declare a global variable in the triggering of the preform

: global .wid: = null;

or

default_value (null, 'global.wid');

-then on your trigger when--button of the " connection " button

SELECT W_ID IN: GLOBAL. WID OF VOTERS WHERE V_ID =: V_ID;

-to destroy a global variable and free its memory, use the built-in procedure clear ;

Erase ('global.wid');

I think that the following discussion is useful to you:

Pass the global variable between two forms

Need HELP with forms overlapping

Hello!
I'm working on a Small cake of drawing in Illustrator using a tutorial that I found online as a guide - link below. I created successfully the cake until step #12... which is to hide the part of a cherry drawn behind the icing. Basically, I don't know what to do after I drew the new shape on top of the icing because when I try to complete this step, nothing happens. I end up just with a new Brown solid form on top of the icing. This as opposed to a cut copy of the section behind the cherry icing.
As a note, I'm sure following steps and using the tools referenced in the tutorial but this step seems to be missing details or maybe my intermediate experience working against me here. Whatever it is, I hope that someone out there will be able to 'fill the gap' for me.
Thank you!!
Link tutorial (see step #12)
http://DesignBump.com/create-cupcake-chocolate-frosting-Illustrator/
My cupcake so far:

JMP,

It seems to be different parts of the portion of chocolate, and you must be in the correct order and paste the cherry in the meantime.

If you look at the pieces in chocolate to the left of the cherry, the version of the statement the (part white to the right of the) left part is covered by the (part black on the far left of the) next part which must be partially in front of the cherry.

Help with forms and e-mail...

Hi all
I have a client that I have developed a website.
She bought godaddy hosting, reserved his domain with godaddy and bought a godaddy email address which is the domain name. For example, his site is www.MySite.com, his email address is [email protected].
I created a form of Muse and set his field "e-mail to" to send to her email ([email protected]).
The service of electronic mail from godaddy (which uses Outlook 365 as their webmail client) will not accept and recognize the e-mail sent by the form with the form data, so my client never receives the news of form in his email ( [email protected]).
If I configure the field "e-mail to" the shape of the Muse to any other email address... This works, however, we want to receive the email to the address [email protected]
GoDaddy said that his e-mail server will not accept messages from an e-mail address that is the domain name (which is meaningless for me).
They suggest that the form be reprogrammed to show his e-mail as being sent to another domain name. Forms of the muse do not offer this option.
Has anyone else been by there yet?
You have a work around that allows us to use the email address, we want (in the Muse "send to" field)?
Thank you!
Gary

Typical GoDaddy...

Looks like your only option is to create a Gmail or hotmail account to have it go and automatically transmitted to the correct e-mail address.

Need help with forms

Is there a way to extend the number of forms beyond what I find in the rectangle tool in the toolbar?

What version of photoshop are you using?

Thanks to the shape of Custom Tool as below.

https://helpx.Adobe.com/Photoshop/using/using-tools.html

I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

Need help with JavaScript web application form. Need to limit the pixels and the size of the image

I build several forms for www.iswapusa.com and on the site, visitors are asked to upload images, I want to restrict the width in pixels max 400 pixels and size to maybe 1 MB to 3 MB of the file images if possible. If there is a code to do this, please let me know and where do I put it on business catalyst system. to work with forms I create or even if I have to give to each form. The forms are available from one of these pages offer commercial or Non-commercial offer.

I found the answer to my problem. It is not a java solution, but a simple code. You can create in your retail or list view depending on where you want the images appear of your form will be mailed. the answer was in a previous post, and the link is:

Dynamically generating thumbnail images

The code I used was:

Need help with the launching track pack for forza code 4

Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.

This is the help I get when the cat to an Ambassador xbox on xbox.com

Terry wrote:

Need help with the launching track pack for forza code 4

The Xbox Ambassador says:

Location of Ambassador of the community...

The Xbox Ambassador says:

Location of Ambassador of the community...

The Xbox Ambassador says:

Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]

The Xbox Ambassador says:

Hello

Terry wrote:

Hello

The Xbox Ambassador says:

Hey

Terry wrote:

just to be on the phone to xbox live support and was told to come here

The Xbox Ambassador says:

ok\

The Xbox Ambassador says:

What is your problem?

Terry wrote:

I bought the 4 for forza ansd 360 new sealed Christmas...

Terry wrote:

has got 2 codes that accompanies the game but the pack track code does not work

The Xbox Ambassador says:

Wow good

Terry wrote:

whenever I put in the code it says code redeemed

The Xbox Ambassador says:

I think the code is used. You must return to the retailer

Terry wrote:

I tried to, but since I already opened the case they will not accept

The Xbox Ambassador says:

Oh. No,

Terry wrote:

the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open

The Xbox Ambassador says:

Maybe it was auto bought?

Terry wrote:

so, how do I get another code generated track Pack if defective?

The Xbox Ambassador says:

I do not know.

Terry wrote:

bought the game new, so I get the track pack

The Xbox Ambassador says:

Oh. It's bad.

The Xbox Ambassador says:

I think that if you Exchange 1 code it will buy it

Terry wrote:

car pack code worked, starter pack did not work

The Xbox Ambassador says:

Oh.

The Xbox Ambassador says:

It's a bad

The Xbox Ambassador says:

BTW you have an evolution of the tests?

Terry wrote:

Yes, I want to? but more anxious to get a code object generated for this pack

The Xbox Ambassador says:

Hey if I help can u give me this game too?

Terry wrote:

?????????????????

Terry wrote:

So is it possible to get a code for that time?

The Xbox Ambassador says:

Hey

The Xbox Ambassador says:

Yes.

The Xbox Ambassador says:

you need to contact them

The Xbox Ambassador says:

and tell them that the code is used.

Terry wrote:

I was told to come here? where can I go to get the code?

Hi Terryg76,

· What version of the operating system is installed on the computer?

I suggest you to contact the game manufacturer for more help and information.

Help with forms of morphing

Similar Questions

Maybe you are looking for