Help with < image slider > flash

Similar Questions

• Need help with image fusion

  Hello

  Before I get to my question, I want to give you a glimpse of the project I'm working on and the aspects that I need help. For a school project, a customer, 94Fifty asked us to create an advertisement that depicts their basketball and could be used in advertising online and in magazines. The 94Fifty of basketball is the world's first "smart ball." It can count how many times you dribbling, the arc of your shot, release time it takes for you shoot, etc. To use the ball, you need an Apple product that can download the application 94Fifty on the App Store, so that this project is done as a collaboration with the company 94Fifty and Apple.

  For my ad, to really capture the idea of being the first smart ball, 94Fifty ball I wanted to mix an image of the texture of the ball of 94Fifty, with the shape and details of a brain, with the slogan being, "A ball that is as smart as you." I have my design buried on, but I'm not sure how to combine the image of the brain with ball should I use layers? How can I remove the pink color of the brain and replace it with the ball while keeping the shape of the brain and the lines creased the brain? Any help and technical that you can give would be greatly appreciated.

  Here are two pictures that I'm trying to mix.

  

  I would also try and keep the logo of 94Fifty which is on the ball in the mixed picture.

  Please do not confuse this for to ask me someone to do it for me, it's the exact opposite of what I want, I just need help with what to do.

  Here is a fairly simple method:

  First of all, level of basketball for the type to be horizontal. (Also correct the values of white light - burn at the top left and bottom top right.)

  Mask on white background of the brain and turn the image to 0% of saturation.

  Put the brain on basketball on its own layer. Make the overlay blend mode.

  Using free transform, reshape the brain is greater (rounder), like the basketball, with a visible margin around the edge of the ball.

  -Now, you have a brain in a basketball, but the brain is a bit too subtle.

  Duplicate the layer of brain as many times as you need to get the good contrast (I've duped the layer of brain three times, for a total of four layers of brain).

  You will probably find that you need to use the levels adjustment layers or curves on each layer of the brain, for finer value adjustments. Make sure that each adjustment layer affects only the layer directly below.

  

• Help with Images of maps,

  Hello

  I have a HTML page where an IMG is loaded:

  "< img src="images/renders/Main_Image.jpeg "alt ="Background Image"name ="Main_IMG"width ="800"height ="600"border = '0' well ="#Main_MAP"id ="Main_IMG"/ >

  Then I have 4 images laid cards on top of the image:

  < name of the card = "Main_MAP" id = "Main_MAP" >

  < area shape = "poly" coords = "- some numbers -" href = "Area1.html" target = "_parent" alt = "The euro1 area button" / > "

  < area shape = "poly" coords = "- some numbers -" href = "Area2.html" target = "_parent" alt = "Button Area2" / > "

  < area shape = "poly" coords = "- some numbers -" href = "Area3.html" target = "_parent" alt = "Button area3" / > "

  "< area shape ="poly"coords =" "-some numbers" href = "Area4.html" target = "_parent" alt = "Button Area4" / >

  < / map >

  See the example:

  

  Each area is basically an invisible button. I want to make sure when the mouse is over the areas, I want the background image to display something different. On mouse out of the box, I want the picture to go back. When the box is clicked, the user is moved to another part of the site.

  Zone 1 should switch from Main_Image.jpeg to Main_Image1.jpeg

  Zone 2 needs to move from Main_Image.jpeg to Main_Image2.jpeg

  etc.

  I thought I could do it with Images of maps, but I can't figure out how. Is there an easier way? I have Dreamweaver CS4.

  Thank you in advance!

  Not possible with a single image and mapping.

  If you "cut" image and place the slices in the DIVs, then you can either add a mouseover javascript or use the slices as background images and add a CSS "hover" effect to change the background image on mouseover.

• Help with widget slider in CP8

  Hello world!

  I am a user of a purchased slider widget control and I saw excerpts of how start with her, variables etc. Although it still seems I need extra help.

  I am creating an interaction where the student can drag the slider handle (with variable numbers defined in the settings of the widget of) and different images will display according to the number of the handle is pulled in.

  For example:

  • When the handle is pulled to 1, then a photo X will change from hidden to display.
  • When the handle is pulled to 2, then Photo X used to hide again and picture shows up and so on.
  • I wish that on the contrary happen, when you pull the rear handle to start point 0; the pictures will show and disappear but to reverse the order. (Maybe, it would be the "reverse polarity"?)

  Anyone here who knows how to do this (in exact order)? Really appreciate it!

  Kind regards

  S

  Hi Sandra,.

  For this interaction, firstly, you need to configure the widget so that his action of success will work continuously. We then hang in a tip read variable of the downhill Action.

  First in the component Properties of the Widget window menu, make sure that the variable has a minimum value of 0 and an maximum value equal to the number of images to display PLUS ONE. So if you have pictures of four , the minimum would be 0 and the maximum value would be 5. Set up the rest of the component options you want. I'm going to assume the name of the variable, that the slider is connected is called the cursor. This will become important when you make the fast Action.

  Go to the menu of the success and failure . By default, assess the success or failure is disabled. Click the button to turn it on. Under evaluate success or failure select continuously. Under the requirements of success choose value choose Score greater than or equal to and drag the slider to the left, so the lowest value is selected. This will cause the widget trigger its action of success on every frame of the movie (which its present on the timeline for). Turn off the failure requirements and make sure reset criteria of rupture for the success is turned on. The widget is now fully configured. Click OK to save your settings.

  In the design Captivate environment, select the widget. In the Properties Panel, select the Actions submenu. Under the successful drop-down, select Execute Advanced Action and create a new tip Action.

  You should do an conditional, Action name is not important, but don't forget to remember it. In the first decision to write the following condition under section perform the action so : cursor [variable] is less or equal to 1 [literal]

  Hide all of the images that you want to hide and show the one to display when the handle is on the first quadrant under Actions .

  Record the action and move to the next decision. Under the new decision, you will write a condition: cursor [variable] [literal] is equal to 2

  Under the action, hide and show images depending on how the interaction should appear when the cursor handle is located above the second quadrant.

  Continue to take new decisions up to the maximum number that you assign to the max value of the widget the cursor. Each action following the same model

  cursor [variable] is equal to 3 [literal]

  cursor [variable] is equal to 4 [literal]

  cursor [variable] is equal to 5 [literal]

  So on to what the last one that is (if we got six pictures):

  cursor [variable] is greater than or equal to 6 [literal]

  In the action in respect of each decision, hide and show the images.

  Record the action. Close the dialog box advanced Actions, and ensure that the right to the peak Action is chosen for the successful action slider.

  Also, be sure that the Success/Failure break subtitles is turned off.

  I tested this configuration and it works pretty well for me.

• Need help with image slideshow quality full-screen

  I'm looking to display pictures with slide show full-screen. The images I add are very large, more than 5000 wide. When I write the site images maintain their quality while others lose it look like shit. Why would this be and how can I solve this problem. I tried to resize the 2560 x 1707 muse done and then add them. This does not change the final result of poor quality.

  Go to the components Panel and locate the image you want to use in the original format. Right-click on the image and chose 'largest import size. "

  

  See if that helps to maintain the quality of this image, as Muse does not resize/interpolate this image for you.

  See you soon,.

  Vikas

• Help with image files, drop box and save the changes?

  My husband put all our photos of drop box.  They are still on our computer, but we can now also access elsewhere.  But it has somewhat modified files.

  I'm putting together, cultures and (in general) to save the changes made to some images.  But I get an error.

  Example: The image I want to change is on the side.  I right-click on the file icon and select "Rotate clockwise" in the menu dropdown. Immediately, I raise the sound "bonk" and an error message appears: "you cannot rotate this image.  The file can be used or open in another program or maybe the file is read only.  It wasn't a problem before doing things to the drop box.

  So, I wait to make sure that everything is ok.  The image is not open anywhere else.  I clicked the properties option to see if it is in read-only mode.  He said that it is not.

  When I open the image and try to use the rotation on the bottom, it will turn.  But when I close the window, I get a different error message that says "Windows Photo Viewer cannot save changes to this picture because there is a problem with the properties of the image file."   There is a link at the bottom of the message box for "Why can't save this picture?  I clicked it.  He said "the subject you are looking for is not available in this version of Windows. For additional assistance, see multiple support options. "The more support options?  Get a tech savvy friend who could help me. Nice.
  Anyone know what I need to do to make this work?
  I don't know what version of windows we have.  I'm sure that's not Vista.  It's the one after that.

  Hello

  Thank you asking in the Microsoft Community.

  1. open Microsoft paint.

  2. navigate to the image through Microsoft Paint.

  3 try to rotate and save the image.

  4 let me know if you are able to.

  Post back with the result.

• Help with images

  Hi all

  Is there a way we can start an image as hidden and change it to visible by using a cutting-edge action?

  I have an image of a process flow and am branching out to watch short videos on every step, but I would like to visually show the progress on the slide with the process flow and I was wondering if I could make a check mark appears next to a stage once they have seen the video and returned to the slide.

  I'm trying to have a single slide of base to turn the videos rather than multiple slides.

  Hope that makes sense :-)

  Leanne

  Take a look at the videos on this page:

  Create a dynamic Menu slide in Adobe Captivate. Infosemantics Pty Ltd

• help with images of full browser size

  Hello

  I would like to have a page with only a picture and constant (or no borders) around him like these pages:

  Banksy

  Banksy

  As you can see, if you resize the browser window, the size of the image follows (get smaller or larger).

  If I use a rectangle of width and then fill them with an image, the images grow when the size of browser window is expand but when browser window is smaller, reduce the picture inside, scrollbar appear which I want to avoid. Do you know how?

  Of course, I could start with a small image (such as 300 pixels wide), but then it would look ugly on a mac with the retina display. In the case of Banksy, the image is 1000 pixels wide, but always get resized to small when the window is reduced.

  Also is there a way to make the entire browser window is filled only with the image (without any boundaries, or sides, even when the browser windows are resized)?

  I tried with the background fill, but somehow, it works no better than with rectangles.

  Thanks a lot for your help

  You can go with these options:

  http://musewidgets.com/collections/all/products/responsive-image

  http://musewidgets.com/collections/all/products/responsive-images

  Thank you

  Sanjit

• Need help with Images associated with berries

  `

  I'm not sure if this is possible, as I am not a common programmer, but I have a question.

  I have a table that generates a random word in a text box, then a second table that generates another word at random in a different text box. What I want is for when a certain word off number one table is generated, a certain image is displayed with it. Here is the code:

  var FirstChoice:Array = ['this', 'Do'];

  var SecondOption:Array = ["during this operation', 'while doing this'];

  generate_btn.addEventListener (MouseEvent.CLICK, getTask);

  function getTask(event:MouseEvent):void {}

  var randomChoice:Number = Math.floor (Math.random () * firstChoice.length);

  var randomTask:Number = Math.floor (Math.random () * secondOption.length);

  First_Thing.text = exerciseChoice [randomChoice];

  Second_Thing.text = homeTask [randomTask];

  }

  For example, when I click the button and the first table generates "Do this", I want a chart specific to appear with him. Similarly, if 'this' generates, I want a different graphic to appear specifically associated with this variable.

  
  

  I hope that this is possible :/ I'm puzzled! I asked for help on StackOverflow; However, their advice did not work. Of course, I only got a response, so I hope that people here can help me out!

  var FirstChoice:Array = ['this', 'Do'];

  var SecondOption:Array = ["during this operation', 'while doing this'];

  var imageA:Array = (mc1, mc2);

  var currentImage:MovieClip

  function getTask(event:MouseEvent):void {}

  var randomChoice:Number = Math.floor (Math.random () * firstChoice.length);

  var randomTask:Number = Math.floor (Math.random () * secondOption.length);

  First_Thing.text = exerciseChoice [randomChoice];

  Second_Thing.text = homeTask [randomTask];

  {if (currentImage)}

  currentImage.visible = false;

  }

  currentImage = UIImage [randomChoice];

  currentImage.visible = true;

  }

• Little need help with swf in flash CS6!

  Hey everybody! I have a question I want to ask you and I just wanted to point a few things. I'm not very advanced with the flash software, so I don't know too much about. My question is, if it would be possible to take a swf animation-(the one that is already uploaded on the internet) put in Flash CS6 and possibly simply change the music which plays in flash animation. While when it's done, the animation plays just as it was the case initially, but with the new track music that was put into it.
  
  

  Any help would be amazing! Thank you!

  You cannot change the answf, you must edit the fla that created it.

  You can build this swf so that it loads the music dynamically track and just change the music track (which gives the new track with the same file name).

• Please help with errors in Flash and create JS Toolkit.

  I'm trying to make a menu in the Toolbox CreateJS so I can put in my site as text replacement for no flash, iOS devices in particular.  I get an unstable overview of error messages and the menu I do not completely understand.

  "Chassis numbers in EaselJS start at 0 instead of 1. For example, this STOP button and gotoAndPlay calls. (20) ' I use image tags to avoid this exact situation, this error doesn't affect the output to HTML5 or is it a warning error message that I can't ignore.

  "Feature not supported: TLF text." Use classic text. (2) I deleted all of the text in this project, breaks out the text in the line art, which has removed all but 2 on this error message.  Is there a way I can find the two that I have left.  I went through all, and yet I can't find the keyframe with these two text entries.

  Other error messages have developed but I donot have a number next to the message so I'm assuming that the output window displays all errors and those with numbers next to them is those who count in this project.  If this isn't the case, please let me know.

  I post the FLA file, but this forum does not allow more than anything.  Here is the full error message that I get from the output window:

  WARNINGS:

  Supported text is limited. It is generally recommended to include the text as HTML (see DOMElement) elements.

  Feature not supported: TLF text. Use classic text. (2)

  Feature not supported: masks.

  In EaselJS frame numbers start at 0 instead of 1. For example, this STOP button and gotoAndPlay calls. (20)

  Buttons are published as MovieClip symbols without interactivity.

  Entry and static text fields are published in the form of dynamic text fields.

  The result of this is chaotic and useless, if I can't make it work I need to arrive at a different solution.

  Thank you

  Brett

  Create works of JS Kit only export animations, all code will be written in java script after export

• Help with Starling for flash cs6

  Hey guys, I posted here a bit lately, sorry.

  I am at a loss for the tutorials of the Starling for Flash CS6 framework.

  There are a lot of tutorials out there for Flash Builder, but not for CS. (Hsharma was interesting and helped me to understand, but I'm having a lot of bad transfer these turorials for Flash CS6..)

  My main problem, I really want to do with Starling is use a sprite sheet to create the animation of a small loop and move it around the screen.

  I think if I understood that in Flash CS6, everything else would be put in place. In fact, I do not understand how to access assets such as sprite sheets in my library of flash games and turn them into sprites on stage with as3/starling. (I understand how to export the actual sprite sheet / data simply do not set-up accompaniment)

  Thank you very much

  Mark D

  Hello

  Here's the blog you were looking for, http://blogs.adobe.com/flashpro/2012/07/12/spritesheet-flashpro-starling/

  Let me know if you have any other questions.

  Kind regards

  Suhas Yan

• Help with miniature slide show.

  I have created pages that have multiple photos of each product. I use a miniature slideshow widget to make a large miniature as the main image of the product that can be clicked on and does jump in a lightbox. This part works fine, but I also have an another miniature lightbox just below where people can see more photos 4 and 5 of the same product.  I want to do is merge these into a slide show.  I thought that uncheck "change set" in settings of the widget would allow me to divide the thumbnails and make a great product shooting and then place the other (much smaller) below sub form of secondary images, thus creating a slideshow. So if someone clicks on the picture of the main product they could then just hit then from there to see the rest.

  Is it possible to do or not?

  Please take a look at the site in its current form (WIP) and see how its configuration now. I need the page are exactly the same, but do have the main pic for each product beginning the full slideshow.

  Thank you

  Richard

  Hi Lukewind,

  What you're saying, it's feasible using the widget to display Lighbox Composition. Check this little video, http://project02.businesscatalyst.com/jing/2012-04-21_0306.swf

  I hope this helps!

  Kind regards

• Need help with Image Processor

  Hello
  
  I have a lot of pictures, that I need to resize to a Web site. These images are all different sizes, 250 x 400 (h) to 200 x 800 (h). I need it to fit in a Web of 246 x 327, in their original proportions, regardless of white space.
  
  Does anyone know if this is possible? So far all my results have failed and image processor seems to just resize proportionally up to a maximum of 246 x 327, so nothing is that the EXACT size, but all the images will be adapted now integrate 246 x 327. I don't know what to do now.
  
  Any help is greatly appreciated.
  
  -Tim

  You can do this with a script.

  Save the code in the settings presets/scripts as filename.jsx, then you can include the script in action. Use "Insert Menu Item' in the menu drop-down action palette and select file - Scripts - select the script.

  function main(){
  if(!documents.length) return;
  var doc = activeDocument;
  var White = new SolidColor();
  White.rgb.hexValue = 'ffffff';
  // target size =  246x327
  FitImage(240, 321 ); //width - height change to suit
  app.backgroundColor = White;
  doc.resizeCanvas(new UnitValue(246,"px"), new UnitValue(327,"px"), AnchorPosition.MIDDLECENTER);
  }
  main();
  function FitImage( inWidth, inHeight ) {
   var desc = new ActionDescriptor();
   var unitPixels = charIDToTypeID( '#Pxl' );
   desc.putUnitDouble( charIDToTypeID( 'Wdth' ), unitPixels, inWidth );
   desc.putUnitDouble( charIDToTypeID( 'Hght' ), unitPixels, inHeight );
   var runtimeEventID = stringIDToTypeID( "3caa3434-cb67-11d1-bc43-0060b0a13dc4" );
   executeAction( runtimeEventID, desc, DialogModes.NO );
  };
  

  Edit: -.

  You need not even the script! as the size is not dependent on the direction, so after the Image ride you can use Image - size canvas in your action.

• need help with image download and preview screen

  Hi guys,.

  I am trying to download image and then view Preview, but when the download form submits to the placeholder image page itself is not updated his source and shows the same image as before.

  4.jpg image already exists.

  I download with nameConflict = "overwrite".

  Download form on the same page, so the page charging points

  In IE image placeholder does not appear the new image, but shows the old one until I have updated the page with F5 and return information, however if checked, image in the file is already different.

  In Firefox, sometimes it works and the image refreshes, sometimes not.

  any help would be greatly appreciated!

  see you soon,

  Simon

  Hi Simon,.

  In this case, you can follow this tutorial

  http://www.communitymx.com/content/article.cfm?cid=71EDA

  HTH