Help with installation of the digital camera

Similar Questions

• Bb user new blackBerry Curve 8330 Smartphones help with installation of the Email

  I can't understand this. "I have a new 8330 and when I go into the configuration Email options I have 2 options: I want to use a professional email with Blackberry Enterprise Server account" and I want to ignore the e-mail configuration. Shouldn't there be an option to configure an existing e-mail account? I want my Outlook of Comcast.net email to pass on to my BB, but can't seem to find a way to do it. I have setup a BIS account which seems to be configured correctly. I use Desktop manager 4.6 and Outlook 2007 HELPPpp please... It seems there is no option in Fund Manager to implement. And when I set up the synchronization options, it only shows the calendar (which works)

  To configure your email go to your phone via the Blackberry Internet Service, there are really only two options: 1) the installer of your phone; or (2) the installer through the website of your mobile phone service provider.  From your phone, search for "Setting up Internet E-Mail" icon, select and it will take you through the steps until the establishment of consumer email.  If you don't see this icon, go to main Menu > Options > Advanced Options > host Routing Table, press the menu key to the left of your trackball and select "register now".  Pull your battery, wait a few seconds and pop and then reconnecting, which should automatically start the phone.  If the icon is not there, contact your mobile phone service provider, because it cannot be fully implemented in their system yet.

  If you try to set up the email on the Blackberry Desktop Manager and you see an 'E-mail settings' icon, and then you installed the BES, not the version BIS of the BB Desktop Manager and you will need to uninstall and reinstall the software.  The key is to choose the second option, the installation options that is for BRI.

  I hope that helps!

• Help with installation of the 1:1 Nat IP agent

  Hi all
  We have several deployments of our application in the different data centers around the world.  Most of them are in Vmware ESX deployments.  All these virtual machines are aware of their private IP (class C subnet).  The hosting provider, and then maps a public IP address to the private IP address with their infrastructure via a 1:1 NAT IP.  So, when I set up the client in our ESX servers, he can see the private IP address.  However when it connects to our server, hyperic to office, it reports incorrect to the hyperic server IP address since it sends the class C IP, not accessible to the public IP address.  Is it possible to replace the IP address of the agent so that it binds to the private IP address, but it sends the public IP address on our server?
  
  Thank you
  Todd

  Hello

  After having configured agent.properties and configure firewall rules, you rerun HQ - agent.sh installation?

  See you soon,.
  Mirko

• And anyone who has used the creative cloud cleaner to help with installation problems?, and anyone who has used the creative cloud cleaner to help with installation problems?

  And anyone who has used the creative cloud cleaner to help with installation problems?  I should try?

  Hi Alison,.

  You do not specify the issue that you are facing, but you can restore Photoshop CC 2014.Please use the link below to find out how to install an older version of any Application Adobe CC.

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  Link to adobe vacuum as you said use the Adobe Creative Cloud cleaning tool to solve installation problems

  Cloud troubleshooting creative risks troubleshoot Adobe Creative Cloud download and installation issues

  Let us know if that helps you solve/Rolling back Photoshop.

  ~ Assani

• Recently impossible to import Photos from the digital camera or iPhone device

  In the past, whenever I have one of my digital cameras or an iPhone connected to my PC (Dell Inspiron 530 running on Windows Vista), the import box would jump to the top, I'd choose to import photos and everything worked without problem.  Not sure if this has anything to do with it, but recently I uninstalled Norton Internet Security 2007 and installed Norton 360 and since then I'm unable to download pictures from my digital camera (Canon Powershot SD950 IS) or my iPhone.  The box "import photos" don't jump (it always did before), and when I go to the Picasa or Windows Photo Gallery and try to "import from camera", it tells me there is no connected device (this happens when the iPhone or the Canon camera is plugged).  And instead of the pealing sound, my PC would usually do when a device is correctly spiked, he made three low knock-type noises, as if to say the device was not properly read.  Interestingly, the iPhone still synchronizes / charges, etc., but I can't get on the photos.  I spent some time chatting with Norton Customer Support, because this issue has started only after that I installed Norton 360, but we have uninstalled Norton 360 (re - installed since) and the problem continued.  I tried several ports, and because this problem has affected at the same time my iphone and a digital camera, that work with any other son and USB ports, I'm pretty sure that this is not something simple like a bad port or wire.  I don't know if it's a matter of updating Windows Vista or what.  So now I'm scratching my head...

  Hi BklnMick,

  Thanks for posting your question on the Forums of Windows Vista.

  I need more information to help you better.

  1. do you think any drive new withdrawal created on the desktop once you connect your digital camera or Iphone?

  2 have you tried to reinstall/update drivers for the digital camera or Iphone?

  3. you see a new message of material found during the connection digital camera or Iphone?

  4. are there any other devices (such as mouse, keyboard, printer etc.) connected to the machine?

  If you are sure that the problem started after installing an application, you can try to perform a system restore on the computer to a previous date when you when it is able to import photos from your digital camera or your Iphone. You can follow the article give:

  http://support.Microsoft.com/default.aspx/KB/936212

  You can also try to power on the machine cycle to drain static electricity that may have built up on the USB ports.

  1. turn of the computer.

  2. disconnect all devices from the CPU.

  3. hold the power button for every 30secs.

  4. connect all devices to the machine.

  5 restart the computer and check if the USB begin to operate.

  Hope the above information helps. Please post back and we do know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer

• Please help: error creating files the digital certificate is not valid

  Hello, I have a problem to publish .air for Flash Professional CS5.5 desktop. When I create the certificate (.p12) file, and then click Publish but apparently alert dialog box is "error creating files the digital certificate is not valid. Your certificate has expired the Mar Mar 12 15:34:32 ICT 1963 "How could I do to solve this case and export the only desktop .air file?

  Double post, responded to Please help: error creating files the digital certificate is not valid.

  Locking thread.

• Blue square icon with 2 White arrows attached to the photos transferred from the digital camera

  All uploaded photos from digital camera to the windows7 picture library have a blue square icon with 2 White arrows ">" attached to each picture in the lower left corner. How do I overcome this?

  All uploaded photos from digital camera to the windows7 picture library have a blue square icon with 2 White arrows ">" attached to each picture in the lower left corner. How do I overcome this?

  =========================================
  If you are running Norton 360... the following article is maybe worth a visit:

  Green checkmark or icon collection blue arrows displayed files in Windows
  Explorer:
  http://www.Winhelponline.com/blog/green-tick-or-blue-arrows-icon-overlay-displayed-for-files-in-Windows-Explorer/

  If you do not need the backup indicators feature you can turn off by
  by clicking settings in the main window of Norton 360, disable the backup
  Status indicators check box and click Close.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Installation of the elements 11 on Mac. Need help with installation error "Setup wants to make changes.

  Installation of items 11 Mac 10.8.2. Need help with Setup error: installation wants to make changes. Type your password to allow this. "After entering the Adobe password, nothing happens.  Locked for more than installation.  Any ideas?  Phone support Adobe couldn't help.

  Just prior to leaving changes (installation in this case) is done on the Mac OS application password & it must be the password for Mac system. This password is the native guest of the system clean & accept the password only. Please make sure that it's the right password (all/admin rights) and the game should work.

• Cannot download pictures from the digital camera

  I was download some pictures from my digital camera to my computer today.  Until today, I was download on another computer, running Linux, without any problem.  Today, I installed the software on my Windows Vista laptop and downloaded some pictures very well.  Later, I took a few more photos, but when I plugged the USB cable, nothing happened.  Nothing has been detected on the computer, not even a message saying that nothing has been detected.  So, I tried to connect the unit to the Linux computer, and the same thing happened.  Is this a problem with the USB, the camera cable or computers?  Any help would be appreciated.

  Thank you!

  It is certainly possible that you might have a hardware problem...

  If you happen to have a USB media player... try to insert your memory
  card in it.

  Can't help you with Linux but on your Vista machine... maybe you need to
  Adjust your AutoPlay settings:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

• Help with Installation error

  Hi, I just purchased Premiere Pro CS6 box years during installation, that an error box appears. It is long enough and he will write as he came. Please forgive the length.

  Exit Code 6.

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DB001, DW050... WARNING: DF029...

  Summary

  -2 fatal Error (s), 1 Error (s), 1 WARNING (s)

  -Payload: Adobe (CFA46C39-C539-4BE9-9364-495003C714AD) standard 2.0 2.0.0.0.

  WARNING: DF029: ARKServiceControl::StartService: standard Service not started or stopped. Current status: exit code 0: 0 Service specif

  -Payload: Infrastructure CSXS (36682D68-3834-487E-BA49-DFA4AB0A2E32) Adobe CS6 3.0.0.0 -.

  FATAL: DB001: database file 'Instal.db' does not exist.

  FATAL: DB001: database file 'Instal.db' does not exist.

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe CSXS Infrastructure CS6: Instal failed

  This is the error report that was generated, can anyone help please. I am new to Adobe products, I just changed during the use of Sony video products due to the many problems associated with it, and told me that adobe was much better. I just need to make it work properly, so I know it's good.

  Any help would be greatly appreciated.

  With regard to the Stewart

  See if the following help file helps you:

  Exit code: 6, Exit Code: 7 Installation errors.

  http://helpx.Adobe.com/Creative-Suite/KB/errors-exit-code-6-exit.html

• Cannot import pictures from the digital camera Canon T3 in Photos

  Hello

  I connect my Canon EOS Rebel T3 and try to import photos into the Photo.  It recognizes my camera and the number of images to import.  But I got these error messages:

  The operation could not be performed. Com.apple.ImageCaptureCore error. The following files could not be imported (they may be an unrecognized file type or the file does not contain a valid data.

  MAC OS X El Capitan 10.11.3

  Photos:

  Version 1.3 (350.23.0)

  Digital camera RAW 6.18 (828)

  Digital Camera Support RAW 6180 (204)

  Should I change a setting in my camera?

  It used to work well in iPhotos.  What can I try?

  Best,

  Louise Ratliff

  Los Angeles.

  See if you can download the files to a folder on the desktop with the Finder or the transfer of images and try importing from there in the library.  If that works reformat the memory card in the camera, take a few test shots and try to re-import from there.

  

• No connection between the computer and the digital camera.

  Tried to download from camera to the computer. After I connect my digital camera to the computer using the usb cable, said digital camera looking for a connection. I never get a guess that the cause I can't go any further. What I am doing wrong. I looked in my computer and the camera seems to be there.  First, he tries with this camera. I have a HP and HP M305 camera.

  You send messages in Forum Vista and you're missing to this effect on the experience of the current users of XP.

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  I gave you the original link will show also a lot more updates and drivers for XP also.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=410648

  To start Devmgmt.msc type device manager in the Start Menu / RUN box.  Make sure that the camera is fixed when you look in the Device Manager.

  Troubleshoot: Windows won't recognize USB hard drive / fix unassigned drive letter
  http://www.TechSpot.com/VB/topic122125.html

• Using Windows movie maker-how can I use Webcam instead of the digital camera

  How can I configure to use the Web cam so of digital camera. Vista uses as an ongoing program.

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  It will be useful.

• HP Solution Center did not download with installation of the complete software/driver for F4580

  I downloaded the complete installation of the software and drivers for the printer/scanner HP DeskJet F4580 several times now, and every time that it only downloads the driver, it does not download the solution Center I need to scan! I am running Windows Vista Home Premium 64-bit and my computer is connected to my printer via USB (not wireless). All the help sections I've read say that the Solution Center is included in this download full (from the HP website), but it does not work when I try. And Yes, I made sure that each box is checked to download when pop-ups the user agreement screen, so it's not like I just didn't the selected software.

  My hardrive was damaged last week and I had to replace it. Needless to say, trying to reinstall all my old programs makes me out of my mind. I don't know where my original disk is; I didn't think that I should once again!

  Help, please! I'm desperate!

  Hello helen1029

  Sounds like you have met an incomplete installation. Try the following to clean drivers and allow a new installation.

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  Complete software features Deskjet F4580

  10. run the download to reinstall the printer

• Download images via the digital camera. the message on removable disk E saying its now safe to remove the mass storage device

  Cannot download pictures from my digital camera.  I've been able to do recently.  Happened several times, I tried the computer shows small icon at the bottom right it is now safe to remove the removable storage device E.  I recently changed my virus protection providers.  This could be the problem or is it a problem with my computer?

  Hi FrankieLastname,

  Check that the automatic run settings are correct:

  1. Click on the Start orb
  2. Select Control Panel
  3. Select auto play

  You should see the card reader that you use for the Sandisk under devices. Select the action you want to take in the drop-down list.