Convert my file of vi in labview 8.5 8.2b23

Similar Questions

• How to convert the file with VI for LabView .lib to CVI?

  Hello

  I have the .lib file for my lock in the amplifier. The lib file is written for labView and already contains a visual interface (like ActiveX). The point is that I need this file for programming in CVI (8.5). How can I convert a LabView ICB .lib?

  Thank you.

  Denis.

  You said that you had a .lib file and in fact you have an llb file. There is a huge difference between an "i" (eye) and a 'l' (ell).

  There is a LabVIEW Instrument Driver Export Wizard but it's only for new pilots of project lifestyle and you need LabVIEW. There is no other way to convert a LabVIEW driver to a driver of the CVI. If the LabVIEW driver uses methods and properties of the ActiveX, you will need to write the same thing in CVI.

• Please convert my file to labview 8.5 labview 8.2

  Hi, can someone please convert my file to labview 8.5 labview 8.2 & it get back to me. I'll be very obliged.
  Thanx

  You can go there.

  If you use it, it takes a lot of work that local variables are abused.  There are while loops that run only once without reason. And serial ports being reconfiguration on each iteration of the loop.

• Is there a way convert several files in sequence at a time?

  I am looking for a way to convert files in sequence from 2012 to 2010 in decline. You are looking to do more than one at a time and I'd like to be able to convert a whole folder down.

  This can be accomplished using the TestStand API by using the following method to check for the previous function:

  RunState.SequenceFile.AsPropertyObjectFile.WriteFile (WriteFileFormat_TestStand45)

  You need to just get a sequence of file references table, which is probably easier to do thanks to a code module (for example the recursive file list VI in LabVIEW).  Don't forget to call Engine.ReleaseSequenceFileEx on the references after the execution of the backsave.

• How to convert .vi .exe with the student LabView version

  Hello

  I would like to know if it is possible to convert .vi .exe with the student Labview version.

  Thank you

  N ° if I remember correctly, your license agreement specifically prohibits this. You would have to buy the professional version of LabVIEW. No real need for a student to create an exe file.

• I would like to only convert a c++ for use in labview dll - my camera has no DLLs in labview

  I have a piezoelectric Control Board (Piezomechanik gmbh) that I would use through LabView.  Currently, the company offers no support for Labview.  Windows detect the device (it came with a driver file), but the company only provides for C++ and Visual Basic dll files.  Can I convert these files to a format that can use Labview?  How can I get Labview to communicate with the control of Narcotics (and ultimately the piezoelectric device attached)?  Thank you!

  This will help you only when you have the header for the DLL file, otherwise you have to create manually using the "call library node' and the description of api DLL wrapper or write a header file for the DLL yourself based on the documentation of the api and the wizard.

  Kind regards

  André

• Help for convert xls file number

  I have an iMAC with El Capitan.  How to convert a file of numbers to the xls format?

  By the numbers: use the export command, the xls is only one of its options.

• How to play (or convert) a file .avi on my MacBook Pro?

  How to play (or convert) a file .avi on my MacBook Pro?

  Probably by installing VLC, but some AVI files can not be played in Mac OS X; AVI is a container, not a format.

  (141493)

• How to convert .mkv files?

  I have a Toshiba 40BV700B TV. I also have a USB key with .mkv video files saved on it

  Apparently, they do not like each other - any suggestions how I can watch my files on my TV... ?

  Any help apprecited - thank you

  Hello

  This is a laptop and a notebook forum options not quite sure if anyone would be able to help you here.
  However, as far as I know the TV supports only a file format FAT32 your USB drive must be formatted in FAT32.

  You can also try to convert mkv files to other formats like avi.
  There are a lot of tools as freeware * SUPER 2012 * which convert these files.

• iTunes game convert my files...

  I wouldn't go as far as naming me as an "audiophile", but I can certainly tell the difference between @ 256 kbps AAC files, and those with the bit rate of a CD.  That said, I spent 3 hours looking for an answer to the cause of my frustration - iTunes game is to convert my files to the ALAC.  When I registered initially for iTunes game a few months ago, precisely, I remember reading somewhere (could not find where so earlier I could quote it) on the Apple Web site that your original in your library files would be unchanged.

  What happened - I noticed today that several of my 'matched' songs had the iCloud beside them download icon. At the time, I was streaming from a Macbook Pro to my home theater receiver using AirPlay, and my iPad for the remote control.  Inadvertently, I clicked on the download icon, which would have been understandable if I was streaming directly from the music app on my iPad, but since I have access to my library on my Macbook, which seemed weird.  This song in particular had been torn from a CD under ALAC format somewhere in the ballpark of 900 kbps bitrate.

  So I went back to my MBP and pulled up in my library - I had played several songs from this album even and only downloaded one.  All the songs that were played were replaced by 256 Kbps protected AAC files.

  Why it's important - iTunes game has been around for several years.  I recently upgraded to it because I had to - I wanted to try the Apple music, and you can't do it, without activating the iCloud, iTunes game aka sharing.  Long ago, I was in College and knew "everything" we were downloading MP3s as fast as our dial-up connections and Napster let us.  It dawned on me that the digital music would be the future, so I ripped all my CDs on my computer (and horribly low flows).  Now I have a nice stereo and can really enjoy the difference between compressed and uncompressed music - granted my ears are not enough to hear a significant difference between 44.1 kHz/16-bit music and audio files of 192 kHz/24-bit Hi Res discern. Having said that, I started to buy my music library in some cases for the third time.  I buy CDs and their extraction in my iTunes as the ALAC files library.  At least until iTunes deems necessary to convert these files down to me.

  So I guess what I'm asking is - is there a way to get around this or am I just wasting my time with music from Apple and iTunes game? Implement a second library of songs only lossless would be a solution? Is it possible to include only one of my libraries in iTunes game?  Must I give up my wish that I can do everything in iTunes and move my library to something like JRiver Media Center?

  For what it worth - I just shot to the top of the album in the Finder and the original file is always there, it is has been replaced by the lower bitrate file in the iTunes window.

  Hello

  ITunes game corresponds to the ALAC as 256 Kbps or transcribed the titles uploaded to 256 Kbps. It does not change your originals unless you choose to delete and replace. Corresponding or downloaded files will be available to listen to or download on other devices.

  You can have a separate library that you do not use iTunes game or Apple's music. Read this tip user do and keep a backup of your iTunes library, and only broadcast from the cloud.

  So you can keep iTunes library Match, separated from your library without loss. If you keep the game and Apple's music in a separate library is your decision. You do not have to match, but read this:

  iTunes game usage tips

  Jim

• This software works well with Mac to convert EPS files in JPEG files?

  This software works well with Mac to convert EPS files in JPEG files?

  EPS to jpg converter

• Is it possible to open the file on communication to labview design in labview?

  Is it possible to open the file on design Communication Labview in Labview? If yes how.

  Thank you

  No, unfortunately it is not possible.

• How to convert 3ga files so that they play on Windows?

  changed title: Samsung Galaxy Player 5.0 8 GB Media Player

  I have the Galaxy G3 phone and I would like to share my voice recordings (which are 3ga files) on my laptop. How to convert this file so that it will play on iTunes or Windows Media Player?

  Frustrated,

  Isake

  I just rename 3ga in mp3 format, then it works well

• How to convert video files in avi files 3pg need a kind of codecs etc.

  I am trying to transfer my video files 3pg by converting avi files to copy on this new player mp3; in the instruction book, which says that if there is no problem converting them, iwould need to download additional codecs to take in charge all the multimedia files. How do you do that?

  Hello

  What operating system is installed on the computer?

  You don't need codecs for the avi files to convert to be played on the player, if you need to read the files on the computer, then you may need to download codecs from the internet.

  You can use your favorite search engine to download codecs and use.

  The audio or video file can be converted to a file type that your device can play and then copied to your device. If it cannot be converted (or you don't want it to be converted), you can always choose to copy the file on the device, but you will not be able to play.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/copy-videos-pictures-and-music-to-a-portable-device

  Let us know if it helps!

• Convert movie files to run to itunes

  some movies will not import files to itunes for example avi, is there a way to convert them to be itunes compatible?

  Hello

  What is the operating system installed on your computer?

  You can use your favorite search engine to find any third-party software convert video files into iTunes.

  NOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I would also ask you to contact the Apple support team for assistance.

  https://discussions.Apple.com/index.jspa